添加剂分子结构特征与灵武煤水煤浆浆体各性质间匹配规律研究

研究了分子结构特征不同的十六种添加剂与灵武煤成浆性、流变特征以及静态稳定性间的匹配规律。实验结果表明，添加剂的主结构特征、取代基的性质、磺化度及聚合度与灵武煤浆体各性质间存在明显的匹配规律，其中，主结构特征、聚合度和磺化度对灵武煤浆体各性质的影响最为显著。分散性能强的添加剂不利于灵武煤煤浆流变特性的改善，而在一定范围内磺化度的增加能明显改善浆体的流变特性；添加剂的聚合度是影响灵武煤浆体的成浆性和稳定性的重要因素。     

分散剂表面吸附特性和相关电化学性质对煤浆分散体系流变特性的影响

采用１７种不同变质程度的中国煤，详细研究了一种阴离子型分散剂在煤表面的吸附特性及其相关的表面电化学性质对煤成浆性及浆体流变特性的影响。结果表明，煤成浆性及浆体流变性并不单独取决于煤对分散剂的吸附量和煤表面动电位的大小。反映煤成浆性的浆体最高煤浆浓度取决于分散剂在煤表面的Ｌａｎｇｍｕｉｒ饱和吸附量Γｓ和相应动电位ξｓ的乘积Γｓ×ξｓ，而浆体流变指数则依赖于两者比值的大小Γｓ／ξｓ。表明水煤浆分散体系中煤颗粒的分散一方面是靠静电分散作用来实现，另一方面，分散剂在煤表面的吸附所产生的非静电分散作用也起了重要作用。同时，分散剂的表面吸附使煤表面产生的吸附荷电效应不能过高，否则，会对流体流变性不利。     

添加剂分子结构特征与灵琥煤水煤浆浆体各性质间匹配规律研究

研究了分子结构特征不同的二六种添加剂与灵武煤成浆性、流变特征以及静态稳定性间的匹配规律。实验结果表明，添加剂的主结构特征、取代基的性质、磺化度及聚合度与灵武煤浆体各性质间存在明显的匹配规律，其中，主结构特征、聚合度和磺化度对灵武煤浆体了为显著。分散性能强的添加剂不地灵武煤煤浆流变特性的改善，而在一定范围内磺化度的增加能明显改善浆体的流变特性，添加剂的聚合度是影响灵武浆体的成浆性和稳定性的重要因素。     

聚己内酯型超分散剂对磁浆流变行为和分散效果的影响

研究了磁性悬浮体（磁浆）的流变行为和分散稳定性，在磁浆中加入聚己内酯型超分散剂可显著降低体系的剪切粘度，提高分散体的稳定性，超分散剂的分散效果与溶化链分子量和锚固基团种类密切相关，当溶剂化链分子量为７００、锚固基团为氨基和羧基混合物，分子结构为“梳状”时，超分散剂的分散效果最佳。     

外加无机电解质对煤浆性质调控作用的研究

考察了数种无机电解质对煤浆分散体系流变特性的影响。结果发现，煤浆的流变特性不仅与电解质种类有关，还取决于煤质特征。某些煤适，适量的无机电解质可使浆体的屈报胀塑料转化为屈服假塑性。     

高分子分散剂在陶瓷浓悬浮体制备中的应用

良好分散的陶瓷浓悬浮体是胶态成型实现的前提和关键。本文阐述了高分子分散剂的分散稳定作用及其在多种单相复相陶瓷浓悬浮体制备中的研究和应用,进而从高分子分散剂自身特性,陶瓷分散相和分散介质的物理化学性质以及陶瓷胶态成型工艺操作等方面,分析了各因素对高分子分散剂分散效果的影响,最后指出了能够优化陶瓷浓悬浮体性能的高分子分散剂的研究趋势。     

低温热改质煤表面性质变化及其对浆体流变特性的影响

考察了几种褐煤热改质过程中表面性质的变化及其对浆体流变特性的影响。研究发现，在２００～３００℃温度范围内，热改质煤表面产生显著的收缩作用，活性含氧官能团尤其是羟基官能团的分解使煤表面疏水化作用显著增强，从而使煤的吸水性大幅度降低。上述煤表面性质的变化是该温度范围内热改质煤成浆性得以大幅度提高的主要原因。相关微分分析进一步表明，煤表面羧基官能团和与之相关的煤的吸水性是制约煤成浆性尤其是低阶煤成浆性的首要因素，而未发现酚羟基官能团能产生重要的影响。对浆体流变特性的研究表明，浆体的屈服假塑性与煤表面活性含氧官能团和矿物质的含量有关，煤表面较高的亲水性有利于浆体屈服假塑性的改善，从而使其对浆体性质的影响具有双重性。     

聚合物复合材料填充剂的表面性质及其分散性的研究

本文通过反气相色谱技术研究了未处理的、硅烷偶联剂处理的和钛酸酯偶联剂处理的三种Al(OH)_3粉末的表面性质,并通过塑化仪和扫描电子显微镜研究了Al(OH)_3填充聚丙烯体系的流变行为及其在聚丙烯中的分散效果.结果表明Al(OH)_3的表面性质对其在聚丙烯介质中的分散效果有着重要的影响.     

煤中无机矿物组分的溶出性及其对水煤浆流变特性的影响

用等离子体原子发射光谱考察了１４种不同变质程度煤中的无机矿物质在煤浆分散体系中的溶出性，并就其对浆体流变特性的影响进行了讨论。结果发现；煤中无机矿物质的溶出性视煤种和煤中矿物质含量的不同而有很大差异，而且，除个别煤熔出相当数量的铝离子外，其余煤在浆体分散体系中溶出的无机矿物离子均主要以钙出子为主，其次为镁，铁离子。     

扩张流变法研究表面活性剂在界面上的聚集行为

近年发展起来的界面流变测定技术在研究界面性质方面具有许多独特之处.本文结合我们的工作,总结了近年来有关该技术在表面活性剂界面聚集行为研究中的应用,讨论了扩张频率、表面活性剂浓度及疏水链长、无机盐和温度对表面扩张流变行为的影响,同时探讨了小分子表面活性剂与高分子表面活性剂表面扩张流变行为的区别以及小分子表面活性剂在气/液界面与液/液表面的扩张流变性的差异.大量研究表明,借助于界面流变性的测定不仅可以研究发生在界面上和界面附近的微观弛豫过程,而且可以探讨界面上超分子聚集体的形成,进而为乳状液和泡沫等分散体系的稳定性提供依据.     

添加剂对TiO2/水分散体流变性的影响

研究了TiO₂生产中有关助剂对其流变性能的影响,得到了TiO₂/水分散体的流变性能与三乙醇胺用量之间的关系,并找到了最佳用量.实验发现,六偏磷酸钠为分散剂时,其使用效果有时间依赖性;碳酸铵作絮凝剂时则对分散体的流变性能和形成的絮凝体有影响.     

Dye-sensitized solar cells based on functionalized truxene structure

Three new metal-free organic dyes(TX1, TX2 and TX3) based on truxene core structure, with triphenylamine as the electron donor, thiophene as the p spacers, and cyanoacetic acid or rhodanine-3-acetic acid as the electron acceptor are designed and synthesized. Their UV–vis absorption spectra,electrochemical and photovoltaic properties were investigated. The cyanoacrylic acid is verified to be a better acceptor unit(meanwhile the anchoring group) compared to the rhodanine-3-acetic acid. And also, two anchoring groups in TX2 could provide stronger adsorption ability on the Ti O2 surface. In addition, the EIS results indicate a slower charge recombination processes for TX2. As a result, dye TX2 bearing two cyanoacetic acid outperforms the other two dyes, exhibiting the photo-conversion efficiency of 2.64%, with Jsc= 5.09 m A cm–2, Voc= 729 m V, FF = 71.1.     

Promoting Effects of Iron on CO Oxidation over Au/TiO2 Supported Au Nanoparticles

Fe-doped TiO₂ supported gold nanoparticles as high-performance CO oxidation catalysts were prepared. XRD data revealed that TiO₂ support was in an anatase phase. After calcination at 300℃, the sample showed nanotube structure, and the size of gold nanoparticles was 3.1 nm. When calcined at 500℃, most nanotubes broke, and gold nanoparticles grew up to 5.9 nm. XPS spectrum indicated the presence of Fe in the +3 oxidation state. Au/Fe-TiO₂(Au:1.44%, Fe:1.35%) calcined at 300℃ possessed the best catalytic activity, and it could completely convert CO at 25℃. The temperature of 100% CO conversion(T_100%) of Fe-free catalyst was 40℃. After the catalysts were stored at room temperature for 7 d, T_100% of Au/Fe-TiO₂ increased from 25℃ to 30℃, while T_100% of Fe-free catalyst increased from 40℃ to 80℃. The catalytic activity and storage stability of Au/TiO₂ could be improved by Fe-doping. The increase of specific surface area, generation of oxygen vacancies and new adsorption sites, depression of the growth of gold nanoparticles, and strong metal-support interaction were responsible for the promoting effect of iron on the catalytic performance of Au/TiO₂ for CO oxidation.     

Dispersion properties of TiO2 nano-powder synthesized by homogeneous precipitation process at low temperatures

The dispersion stability of rutile TiO₂ powder with a unique nano-structure synthesized by homogeneous precipitation process at low temperatures (HPPLT) has been investigated with adding the various electrolytes in both pure aqueous and organic media. Zeta potential measurements have shown that the addition of electrolytes such as CsCl, CaCl₂, FeCl₃, and ZrCl₄ to aqueous and pure organic dispersion media leads to generally a charge reversal from negative to positive on the surface of TiO₂ particle. The electrostatic repulsive force acting on between TiO₂ particles dispersed in pure organic media was found to be significantly greater than that in aqueous media, which is closely related to the physical properties of the organic solvents, such as viscosities and dielectric constant. The surface potentials of TiO₂ particles have been greatly modified by the particulate properties, pH, dispersion medium, and valence of the ionic species, which governs the colloidal behavior of TiO₂ particles virtually.     

PVP和SDS在固液界面上的混合吸附

实验测定了PVP和SDS自其混合溶液在碳黑及TiO₂表面上的吸附。在TiO₂表面上,当溶液中SDS的浓度低于4×10^-3mol·dm^-2时,PVP与SDS的吸附互相增强;当SDS的浓度更高时,则彼此对抗。在碳黑表面上,SDS与PVP表现为单纯的竞争吸附。根据SDS与PVP之间复合物的形成和吸附剂的表面性质讨论了实验结果。     

Pd/TiO2/C复合催化剂的制备及其在碱性溶液中对乙醇氧化的电催化性能

钛酸四丁酯前驱体水热合成制备纳米TiO₂颗粒,在TiO₂和Vulcan XC-72活性炭复合载体上液相还原负载Pd纳米颗粒,制得Pd/TiO₂/C复合催化剂. 通过透射电镜（TEM）和X射线衍射（XRD）测试表明其具有面心立方结构,Pd金属粒子（粒径约3 ~ 4 nm）均匀分散在锐钛矿型的纳米TiO₂和活性炭的复合载体上. 循环伏安和计时电流曲线测试表明,与相同Pd载量的Pd/C相比,20% Pd载量的Pd/TiO₂/C颗粒在常温常压下对乙醇的电催化氧化有很高活性和稳定性. 这主要归功于纳米TiO₂改变了Pd表面的电子特性,且增大了其比表面积.     

Surfaced-modified TiO2 Nanofibers with Enhanced Photodegradation Under Visible Light

Asynchronized surface modification method based on coaxial electrospinning was developed to fabricate high-efficiency photodegradative nanofiber for water purification. TiO₂ nanoparticles assembled uniformly on the surface of polycaprolactone(PCL) nanofibers to form composite nanofibers through one step process. The maximal content of Ti element was 25.6%(mass fraction) in the PCL/TiO₂ composite nanofibrous membrane, which exhibited hydrophilicity and excellent photodegradation under visible light in water. The Rhodamine B dye degraded 96.17% in 120 min under visible light by the PCL/TiO₂ composite membrane. The adsorption behavior fitted Langmuir model well and indicated chemical related adsorption. This PCL/TiO₂ composite nanofibrous membrane has super degradation properties and displays great application potential to environmental protection.     

介孔TiO2对溶菌酶吸附的动力学和热力学

773.15 K下焙烧二钛酸(H₂Ti₂0₅)制备了介孔结构TiO₂。采用比表面分析仪(BET)、扫描电镜(SEM)、拉曼(Raman)光谱和X射线衍射(XRD)仪进行表征研究了介孔TiO₂对溶菌酶的吸附行为和机理。结果表明,该吸附过程较好地满足Langmuir吸附模型;随着溶液pH值的增高,溶菌酶在介孔TiO₂上的吸附量先增大后减小。在pH = 7.2时,达到最大吸附容量72.5 mg·g^-1。该介孔TiO₂对溶菌酶具有良好的吸附稳定性,经过5次循环后吸附的溶菌酶残余量仍有81.6%。动力学研究表明,介孔TiO₂与溶菌酶间的吸附满足准二级动力学模型,吸附传质过程由膜扩散和粒内扩散共同影响与控制。对热力学参数的计算发现,该过程ΔG⁰ < 0, ΔH⁰ > 0, ΔS⁰ > 0,表明介孔TiO₂对溶菌酶的吸附是一个自发的、吸热的熵增过程。     

Boosting sodium storage of mesoporous TiO2 nanostructure regulated by carbon quantum dots

It has been demonstrated that the conductivity and electrochemical properties of TiO2 nanomate rials can be significantly improved by an incorporation of carbon additives.In the study,we develop a novel Ndoped TiO2 mesoporous nanostructure via the addition of carbon quantum dots(CQDs)solution following a scalable hydrothermal process.The as-made TiO2 product shows well-defined morphology,high conductivity,large surface area,and abundant mesopores.When evaluated as anodes for sodiumion batteries,the CQDs@TiO2 product annealed at 500℃exhibits a superior sodium storage capability.It delivers a high reversible capacity of 168.8 mAh/g at 100 mA/g over 500 cycles and long cycling stability.The remarkable performance of CQDs@TiO2 mainly arises from the large surface area and mesoporous architecture constructed by ultrathin TiO2 nanosheets,as well as the full coope ration between CQDs and TiO2.     

Preparation of TiO2–ZrO2 mixed oxides with controlled acid–basic properties

Titania–zirconia mixed oxides with various ZrO₂ content in TiO₂ (10, 50 and 90 wt.%) were prepared by the sol–gel method. High specific surface areas (77–244 m²/g) were obtained. Acidity determined by NH₃-TPD and FTIR-pyridine adsorption showed that in mixed oxides the number of acid sites is dramatically increased; it varies from 173 μmol NH₃/g for TiO₂ to 1226–1456 μmol NH₃/g for the mixed oxides. FTIR-pyridine adsorption showed the presence of Lewis sites in the catalysts. Basic sites were identified by FTIR-CO₂ adsorption, suggesting the formation of mixed oxides with acid–basic properties. XRD spectra identified anatase in the TiO₂ rich region, amorphous material in the mixed oxide 50–50 TiO₂–ZrO₂ and tetragonal and monoclinic crystalline phases in the ZrO₂ rich region. Activity in the isopropanol decomposition showed a good correlation between the acid–basic properties and the selectivity to propene, acetone and isopropyl ether. The latter was found as a product which mainly depends of the acid sites density.