一种新的高聚物酶联免疫印迹法的建立及其在乙肝表面抗原检测中的应用

聚(N—异丙基丙烯酰胺)(PNIP)于室温下是一种水溶性聚合物。这个聚合物的水溶液在32℃左右,在一个宽的浓度范围内(可高达5％)具有下部临界会溶温度(LCST)。在研究中我们发现,PNIP和PNIP与酶标抗体的复合物可以快速紧密地吸附到醋酸、硝酸纤维素膜上。利用PNIP在纤维素膜上的高保留率的特性,我们建立了一种新的免疫分析方法:聚合物酶联免疫印迹法。该法简单、快速、特异性高,能检测到人血清中10ng/ml的乙肝表面抗原。     

可控相转变温度热敏高分子的制备及其在免疫分析中的应用

合成了一种新型的快速响应热敏高分子聚N－异丙基丙烯酰胺－丙烯酰胺[P(NIP-co-AA)]，通过改变丙烯酰胺的含量可以改变高分子的临界溶解温度（LCST），使之用于不同用途。其中，将相转变温度（Ttr)在37℃的热敏高分子用于免疫分析的载体，建立了夹心型荧光免疫分析兔IgG的新方法。与聚N－异丙基丙烯酰胺（PNIP）作载体相比，两灵敏度相当，但由于相转变温度的提高，使得免疫反应的温度更接近于生物体的生理环境，并使免疫反应速率得到提高。该方法线性范围为0-1000μg/L；检出限为10μg/L。用于兔血清中兔IgG的测量，结果令人满意。     

带活性末端的热敏高分子的制备及其在荧光免疫分析中的应用

合成了带有活性末端的寡聚N-异丙基丙烯酰胺(ONIPAAm),并考察了其温度敏感性质.以ONI-PAAm作为免疫分析的载体与鼠IgG偶联,以四磺基铁酞菁为标记物,以羊抗鼠IgG抗体为分析模型,建立了竞争型热敏相分离荧光免疫分析新系统.羊抗鼠IgG抗体在0～1500ng/mL范围内与体系相对荧光强度呈良好的线性关系,检测限为2ng/mL.     

以萘酰亚胺衍生物基荧光高分子为载体和指示剂的 相分离免疫分析方法

以4-甲氧基-N-(2-N’,N’-二甲基氨基乙基-N’-烯丙基)萘二甲酰亚胺氯化铵(DMNAA)为荧光单体, 合成了一种pH敏感荧光高分子聚N-异丙基丙烯酰胺-4-甲氧基-N-(2-N’,N’-二甲基氨基乙基-N’-烯丙基)萘二甲酰亚胺氯化铵-N,N-二甲基氨丙基甲基丙烯酰胺[P(NIP-DMAPM-DMNAA)]. 采用共聚法将日本血吸虫抗原(SjAg)固定在P(NIP-DMAPM-DMNAA)上, 制备P(NIP-DMAPM-DMNAA)-SjAg连接物, 与日本血吸虫抗体(待测, SjAb)发生免疫反应后, 调节pH值, 使荧光高分子相变分离高分子-免疫组分连接物, 最后, 利用蛋白A对抗体的亲和性捕获P(NIP-DMAPM-DMNAA)-SjAg-SjAb, 通过测定高分子自身的荧光信号来定量 SjAb. 该新型高分子具有良好的荧光特性, 对pH响应快速, 37 ℃下相转变pH值为7.2, 分离免疫复合物时造成的损害低. 与传统相分离免疫分析比较, 新方法通过高分子相变分离和蛋白A捕获双重分离作用, 消除了非特异性组分和未反应的特异性免疫成分等的干扰; 利用高分子自身的荧光信号检测, 无须另外的标记物, 大大提高了免疫分析的简便性. 以日本血吸虫抗体为分析对象, 测得线性范围为1～1500 ng/mL, 抗体检出限为1.3 ng/mL, 相对标准偏差为3.6% (n＝10), 结果令人满意.     

两种环境敏感高分子在相分离免疫分析中的比较研究

进行了两种环境敏感高分子在相分离免疫分析嗜水气单胞菌外膜蛋白(outer membrane protein, OMP)中的比较研究. 首先合成温度敏感高分子聚N-异丙基丙烯酰胺和pH敏感高分子聚(N-异丙基丙烯酰胺-甲基丙烯酸), 分别以N-羟基琥珀酰亚胺丙烯酸酯(NAS)和碳二亚胺(EDCI)作为偶联剂与抗OMP抗体(Ab)偶联形成抗体复合物(Ab-polymer), 在竞争型免疫测定中, OMP标准溶液与异硫氰酸荧光素标记OMP在均相条件下竞争性地与Ab-polymer反应, 调节外界环境分离出高分子免疫复合物沉淀, 重新溶解后荧光法定量, 两种体系的OMP浓度均在400～3000 ng/mL范围内与荧光强度呈良好线性关系, 检出限分别为84.7和39.6 ng/mL. pH敏感高分子相比于温度敏感高分子具有以下优点: 可以在37 ℃的生理温度进行免疫反应, 进一步提高了免疫反应的速度和效率; 可利用高分子本身的活性基团进行Ab的固定, 固定化效率、固定Ab的免疫反应活性较之NAS偶联法得到了提高; 有更高的检测灵敏度. 因此, pH敏感高分子更适合于作为相分离免疫分析的载体.     

超支化聚合物作为放大信号的纳米磁性微球电化学免疫分析法

提出了一种基于超支化聚合物(HBP)固化酶标二抗作为放大信号和纳米磁球相结合的超灵敏的免疫分析新方法。首先羧基纳米磁性微球共价键合乙肝抗体(HBsAb)形成免疫磁性微球,然后与待测乙肝表面抗原(HBsAg)发生特异性结合,加入HBP标记的酶标二抗(HBPS)与结合的抗原结合发生夹心反应。在外加磁场的作用下,抗体抗原免疫复合物易从样品溶液中分离,在含有邻氨基苯酚和H2O2的底液中,快速生成具有电活性的化合物3-氨基吩呃嗪,用示差脉冲伏安法(DPV)测定响应电流,电流强度(I)与乙肝表面抗原浓度(c)在0.05～10.0μg/L范围内呈线性关系,线性回归方程为I(μA)=0.140+16.80 c(μg/L),相关系数r=0.9995,检出限达0.008μg/L,并用于实际样品的测定。     

溶胶-凝胶-HBsAb膜免疫传感器的研制与应用

采用溶胶-凝胶(Sol-gel)技术,成功地将乙肝表面抗体(HBsAb)包埋于Sol-gel中,再滴涂于铂盘电极表面,制成溶胶-凝胶-HBsAb膜非标记免疫传感器.根据抗原与抗体特异性结合形成的免疫复合物使敏感膜有效扩散截面积减小的特性,提出了利用铁氰化钾作为氧化还原探针间接检测乙肝表面抗原(HBsAg)的新方法.用循环伏安法(CV)对电极逐层修饰过程进行了表征,并探讨了对HBsAg定量检测的可行性及其响应机理.采用差示脉冲伏安法(DPV)检测人体血清中的HBsAg.线性范围5～320μg/L,线性相关系数r=0.997.该传感器响应迅速,灵敏度高,稳定性好.于4℃干态保存14d,其响应信号基本不变.将其用于108例临床血清检验,与酶联免疫吸附法(ELISA)的符合率为87.5％.     

非竞争性毛细管电泳免疫分析乙肝表面抗原

用硫脲标记乙肝抗体(抗-HBs),基于抗原．抗体高选择性识别,建立了非竞争性毛细管电泳免疫分析乙肝表面抗原的新方法。研究了混合温育时间、缓冲溶液酸度和浓度、进样时间的影响。在5mmol／L Tris-20mmol／L H3BO3-3mmol／L EDTA(pH7．0)的运行缓冲溶液中,游离的标记抗体和抗原抗体复合物在15min内完全分离。HBsAg在4．0—50mg／L范围内与复合物的峰面积呈良好的线性关系;相对标准偏差小于6％;检出限为3．0mg／L。该方法用于乙肝病人血清和正常人血清中HBsAg的测定,结果令人满意。     

带有乙型肝炎表面抗原基因的重组痘苗病毒——一种可能的乙型肝炎活疫苗

我们组建了带有痘苗病毒胸腺嘧啶核苷激酶(TK)基因的痘苗病毒载体,并将乙型肝炎(以下简称乙肝)表面抗原(HBsAg)基因(adr亚型)插入载体质粒,置于痘苗病毒早期启动基因的调控下。通过感染与转染相结合的方法,得到了带有乙型肝炎表面抗原基因的重组痘苗病毒。它保持了原有的感染性,并能有效地表达乙肝表面抗原。当病毒接种量为每个细胞1PFU(空斑形成单位)时,每1×10~6细胞感染后24h可产生2—3μg HBsAg,其中大部分释放于细胞培养液中。每升培养液可以产生0.5—1mg HBsAg。表达产物HBsAg能形成颗粒,其大小、浮力密度,多肽组份等都与病人血清中的HBsAg颗粒相同。用重组痘苗病毒免疫家兔,可以产生抗乙肝表面抗原的专一性抗体。实验结果表明,利用本文组建的重组痘苗病毒不仅可以提供一个生产乙肝表面抗原的系统,而且这种重组痘苗病毒就可作为活疫苗使用,来预防乙肝病毒感染。     

溶胶-凝胶非标记免疫传感器检测乙肝表面抗原

采用溶胶 凝胶 (sol gel)技术包埋乙肝表面抗体 (HBsAb) ,涂布于金盘电极表面 ,构成sol gel HBsAb/Au非标记免疫传感器 ,用于检测人血清中乙肝表面抗原 (HBsAg)。该传感器对HBsAg的电位响应遵循Nernst方程 ,在 1～ 330 μg/L浓度范围内 ,传感器的电位响应值ΔE与HBsAg浓度C的对数呈线性关系 ,线性回归方程为ΔE =1 8.1 7+79.84lgC。响应时间为 3min。癌胚抗原、甲胎蛋白等对测定无明显影响。对于HBsAg阴性血清 ,电位响应值ΔE <30mV ,而对于阳性血清则ΔE >30mV ,据此 ,作为临床判别的依据。对1 0 0例临床血清分别用传感器和酶联免疫法 (ELISA)进行双盲检验 ,两法的符合率为 86 %。     

A novel mimetic enzymatic fluorescence immunoassay for hepatitis B surface antigen by using a thermal phase separating polymer

Iron tetrasulfonatophthalocyanine (FeTSPc), a peroxidase mimic, was used as a labeling reagent and poly(N-isopropylacrylamide) (PNIP) as the separation support of the immune complex for the mimetic-enzymatic immunoassay of hepatitis B surface antigen (HBsAg). PNIP was precipitated from aqueous solution when the ambient temperature was higher than its lower critical solution temperature of 31 degrees C. In a sandwich immunoassay, the antigen (HBsAg) first reacted with mouse anti-human HBsAg antibody immobilized on PNIP (PNIP-antibody) and then further reacted with FeTSPc-labeled mouse anti-HBsAg antibody (antibody-FeTSPc) at room temperature in a homogeneous format. After changing the temperature to separate the PNIP-antibody-HBsAg-antibody-FeTSPc conjugate moiety, it was re-dissolved and determined by coupling with the fluorogenic reaction of hydrogen peroxide and p-hydroxyphenylpropionic acid. The sensitivity of this method (3 ng mL-1) was close to that of the traditional ELISA using the same reactants. However, the assay was much faster (the assay time decreased from 100-120 to 45 min). This method was applied to determine HBsAg in human serum with satisfactory results.     

红细胞标记抗体的化学发光免疫分析

用红细胞代替辣根过氧化物酶作为双抗体夹心免疫分析中第二抗体的标记物, 建立了一种红细胞标记抗体的免疫化学发光测定乙型肝炎病毒表面抗原的新方法. 在免疫反应完成后, 结合了抗原-抗体免疫复合物的致敏红细胞在低渗溶液中溶血, 释放出血红蛋白. 基于血红蛋白对鲁米诺-H2O2体系化学发光具有催化作用的原理, 采用化学发光法测定血红蛋白含量. 测得的血红蛋白发光强度与待测抗原浓度呈线性关系. 采用这种方法可检测出0.5 ng/mL的乙型肝炎病毒表面抗原. 将该方法与酶联免疫吸附分析(ELISA)结合起来对乙型肝炎患者血清乙肝病毒表面抗原(HBsAg)进行检测, 两者符合率均为97%, 表明本法具有良好的灵敏度和特异性, 可用于临床标本测试.     

氯化血红素作为模拟酶荧光免疫分析乙肝表面抗原

乙肝表面抗原的测定在临床诊断上是一项很重要的指标．现在一般采用酶联吸附免疫分析技术测定，但是酶本身性质不稳定且价格昂贵、操作繁琐；更重要的是大分子的酶作为标记物，由于空间位阻效应而阻碍抗原-抗体的免疫反应．所以，用小分子催化剂代替大分子酶的研究显得日益重要[1，2]．近年来有关模拟酶在免疫分析中的应用已有报道[3，4]．本文提出了以氯化血红素作为辣根过氧化物酶（HRP）的模拟酶来标记抗体，以盐酸硫胺素（维生素B1）作为供氢体，成功地实现了乙肝表面抗原（HBsAg）的夹心法荧光免疫分析．测定范围是2．5～500ng／wel…     

基于胶体金标记的阳极溶出伏安免疫分析用于免疫球蛋白G的测定

提出了一种基于胶体金标记的阳极溶出伏安免疫分析方法。免疫反应在聚苯乙烯微孔板中以夹心分析模式进行,通过物理吸附将兔抗人免疫球蛋白G(IgG)抗体固定于微孔板上,与相应抗原IgG发生免疫反应后,再通过夹心模式捕获相应的纳米金标记的羊抗人IgG抗体,然后再与金标羊抗人IgG抗体和金标兔抗羊二抗形成的免疫复合物反应,在微孔板上进一步引入大量的纳米金,将金溶解后,在碳糊电极上用阳极溶出伏安法(ASV)对金离子进行检测,溶出峰电流的大小间接与待分析物IgG的浓度成正比。对免疫分析的一些实验条件进行了优化。阳极溶出峰电流与IgG的对数浓度在1.1~1 143 ng/mL范围内呈良好的线性关系,检出限为1 ng/mL。将该方法应用于人血清中IgG浓度的测定,取得了满意结果。     

Highly sensitive rapid chemiluminescent immunoassay using the DNAzyme label for signal amplification

A novel trace tag for chemiluminescent (CL) immunoassay was designed by using DNAzyme to functionalize antibody-labeled Au nanoparticles (AuNPs). The trace tag showed an excellent ability to catalyze the oxidation of luminol by hydrogen peroxide, leading to strong CL emission. By coupling the trace tag with a passive mixing accelerated immunoreaction system, a highly sensitive rapid flow-through CL immunoassay method was proposed. Using carcinoembryonic antigen (CEA) as a model analyte, the capture antibody for CEA was immobilized on paramagnetic microspheres, and DNAzyme-anti-CEA antibody functionalized AuNPs were prepared as trace tag. A three-dimensional helical glass tube kept at 37 °C in a water bath was used for passively mixing immunoreagents in a two-step sandwich immunoassay, with which each immunoreaction step could be finished within 150 s. With the help of a magnet, the immunocomplex could conveniently be separated from reactants. Compared with the horseradish peroxidase-based tag, the newly designed trace tag showed obvious signal amplification due to its strong catalytic ability and high loading ratio of DNAzyme on each AuNP. The proposed method showed a linear calibration range from 0.005 to 0.5 ng mL(-1) for CEA detection with a detection limit of 4.1 pg mL(-1) at a signal-to-noise ratio of 3 and acceptable detection reproducibility. The assay results of clinical serum samples were in acceptable agreement with the reference values. The designed immunoassay system with ultrahigh sensitivity provided a programmable and low-cost approach for high-throughput clinical application.     

压电免疫传感器用于乙肝表面抗原的测定

乙肝表面抗原 ( HBs Ag)的检测是临床诊断乙型肝炎的一项重要指标 .目前常用酶联免疫法和放射免疫法检测 [1] ,但酶本身性质不稳定且价格昂贵、操作繁琐 ;而放射免疫法存在放射性废物难处理的局限性 .压电免疫传感器具有装置简单、价格便宜、灵敏度高、实时快速和无需标记等优点 ,广泛应用于环境监测、药物分析及微生物检测等多个领域 [2～ 4 ] .本文应用自组装单分子膜技术 ,在压电石英晶体表面形成致密有序的半胱胺单分子膜 ,通过戊二醛共价交联 ,将乙肝表面抗原单克隆抗体分子固定于晶体电极表面 ,研制成 HBs Ag压电免疫传感器 ,用于…     

Evaluation of the molecular recognition of monoclonal and polyclonal antibodies for sensitive detection of 2,4,6-trinitrotoluene (TNT) by indirect competitive surface plasmon resonance immunoassay

Detection of TNT is an important environmental and security concern all over the world. We herein report the performance and comparison of four immunoassays for rapid and label-free detection of 2,4,6-trinitrotoluene (TNT) based on surface plasmon resonance (SPR). The immunosensor surface was constructed by immobilization of a home-made 2,4,6-trinitrophenyl–keyhole limpet hemocyanin (TNPh–KLH) conjugate onto an SPR gold surface by simple physical adsorption within 10 min. The immunoreaction of the TNPh–KLH conjugate with four different antibodies, namely, monoclonal anti-TNT antibody (M-TNT Ab), monoclonal anti-trinitrophenol antibody (M-TNP Ab), polyclonal anti-trinitrophenyl antibody (P-TNPh Ab), and polyclonal anti-TNP antibody (P-TNP Ab), was studied by SPR. The principle of indirect competitive immunoreaction was employed for quantification of TNT. Among the four antibodies, the P-TNPh Ab prepared by our group showed highest sensitivity with a detection limit of 0.002 ng/mL (2 ppt) TNT. The lowest detection limits observed with other commercial antibodies were 0.008 ng/mL (8 ppt), 0.25 ng/mL (250 ppt), and 40 ng/mL (ppb) for M-TNT Ab, P-TNP Ab, and M-TNP Ab, respectively, in the similar assay format. The concentration of the conjugate and the antibodies were optimized for use in the immunoassay. The response time for an immunoreaction was 36 s and a single immunocycle could be done within 2 min, including the sensor surface regeneration using pepsin solution. In addition to the quantification of TNT, all immunoassays were evaluated for robustness and cross-reactivity towards several TNT analogs.      

基于AuNPs/PDDA-GO纳米复合物的电化学免疫传感器的构建及对SirT1蛋白的检测

基于AuNPs/PDDA-GO纳米复合物制备了一种新型电化学免疫传感器, 并将其用于SirT1的检测. 首先, 在电极表面修饰复合材料AuNPs/PDDA-GO, 然后将目标蛋白SirT1固定到修饰了AuNPs/PDDA-GO的电极表面, 再通过特异性免疫反应结合一抗(Ab₁)和辣根过氧化酶标记的二抗分子(HRP-Ab₂), 最后用示差脉冲伏安法检测电流信号, 实现了对SirT1蛋白水平的测定. 在优化的实验条件下, SirT1蛋白的浓度在0.1~100 ng/mL范围内与响应电流呈良好线性关系, 检出限为0.029 ng/mL.     

Electrochemical immunoassay of hepatitis B surface antigen by the amplification of gold nanoparticles based on the nanoporous gold electrode

We describe herein the combination of electrochemical immunoassay using nanoporous gold (NPG) electrode with horseradish peroxidase (HRP) labeled secondary antibody-gold nanoparticles (AuNPs) bioconjugates for highly sensitive detection of protein in serum. The electroactive product of o-phenylenediamine (OPD) oxidized with H₂O₂ catalyzed by HRP was reduced in the Britton-Robinson (BR) buffer and the peak current of which was used to determine the concentration of antigen (Ag) in the analyte. The active surface area of NPG electrode was larger than that of a bare flat one. The presence of AuNPs enhanced the immobilized amount of HRP labeled antibody (Ab), which improved the sensitivity of the immunoassay when used as the secondary antibodies. As a result of these two combined effects, the sensitivity of the immunoassay for the determination of target protein was increased significantly. Using hepatitis B surface antigen (HBsAg) as a model, we demonstrate a dose response in the range of 0.01-1.0 ng/mL with a detection limit of 2.3 pg/mL. Analytical results of several human serum samples obtained using the developing technique are in satisfactory agreement with those given by enzyme-linked immune-absorbent assays (ELISA). In addition, the technique was about 100 times more sensitive in the detection of HBsAg than ELISA. All these demonstrated the feasibility of the present immunoassay method for clinical diagnosis.     

Fluorescence immunoassay of alpha-fetoprotein with iron(III) tetrasulfonatophthalocyanine as a mimetic enzyme labeling reagent

A new fluorimetric immunoassay for alpha-fetoprotein (AFP) has been developed using a novel promising mimetic peroxidase, iron(III) tetrasulfonatophthalocyanine (FeTSPc), as a labeling reagent to catalyze the fluorescence reaction of P- hydroxyphenylacetic acid (P-HPA) and hydrogen peroxide (H2O2). In the competitive immunoassay, anti-AFP antibody was coated on a 96-well plate (polystyrene) and a constant amount of FeTSPc-labeled AFP and a known amount of test solution were added. Non-labeled and FeTSPc-labeled AFP compete for binding to the plate-bound antibody. After the immunoreaction, the immunochemically adsorbed FeTSPc-AFP conjugate moiety was determined by measuring the fluorescence produced in a solution containing P-HPA and H2O2. AFP can be determined in the concentration range of 1-300 ng mL(-1) with a detection limit of 0.5 ng mL(-1).