Hydrogen bonding and hydrophobic interactions between [60]fullerenated poly(2‐hydroxyethyl methacrylate) and poly(1‐vinylimidazole) or poly(4‐vinylpyridine)

Miscible blends of poly(2‐hydroxyethyl methacrylate) (PHEMA) and poly(1‐vinylimidazole) (PVI) have been formed in methanol/water (3/2 v/v) solutions. The incorporation of 0.6 wt % C₆₀ into PHEMA leads to hydrophobic interactions and enhanced hydrogen bonding in miscible blends of [60]fullerenated poly(2‐hydroxyethyl methacrylate) (FPHEMA) with PVI. The incorporation of 2.6 wt % C₆₀ into PHEMA increases its tendency to form interpolymer complexes with PVI. Interpolymer complexes are formed when FPHEMA samples containing 0.6, 1.4, and 2.6 wt % C₆₀ are blended with poly(4‐vinylpyridine). The yields of the complexes increase with increasing C₆₀ content in FPHEMA. Calorimetry and Fourier transform infrared spectroscopy studies suggest the importance of hydrophobic interactions in C₆₀‐containing blends and complexes. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4316–4327, 2002     

Rheological and mechanical properties of epoxy/polyurethane blends initiated by N‐benzylpyrazinium hexafluoroantimonate salt

In this work the cure behavior and rheological and mechanical interfacial properties of the diglycidylether of bisphenol A (DGEBA)/polyurethane (PU) blend system, initiated by 1 wt % N‐benzylpyrazinium hexafluoroantimonate as a latent thermal catalyst, were investigated. To characterize the mechanical interfacial properties of the system, the critical stress intensity factor (K_IC) was calculated with a single‐edge‐notched beam (SEN) beam fracture toughness test. And an impact test was performed at room and cryogenic temperatures to determine the performance of PU at room and low‐temperatures, respectively. As a result, the E_c of the blend system was increased with increasing PU content, showing a maximum value at 30 wt % PU, which was in good agreement with the mechanical properties of the blend system. Consequently, these results could be explained by the improvement that occurred in intermolecular hydrogen bonding between the hydroxyl group in EP and the isocyanate group in PU, resulting in increased compatibility of the components within the interpenetrating polymer networks. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3841–3848, 2004     

Study of hydrogen‐bonding strength in poly(ϵ‐caprolactone) blends by DSC and FTIR

The hydrogen‐bonding strength of poly(?‐caprolactone) (PCL) blends with three different well‐known hydrogen‐bonding donor polymers [i.e., phenolic, poly(vinyl‐phenol) (PVPh), and phenoxy] was investigated with differential scanning calorimetry and Fourier transform infrared spectroscopy. All blends exhibited a single glass‐transition temperature with differential scanning calorimetry, which is characteristic of a miscible system. The strength of interassociation depended on the hydrogen‐bonding donor group in the order phenolic/PCL > PVPh/PCL > phenoxy/PCL, which corresponds to the q value of the Kwei equation. In addition, the interaction energy density parameter calculated from the melting depression of PCL with the Nishi–Wang equation resulted in a similar trend in terms of the hydrogen‐bonding strength. Quantitative analyses on the fraction of hydrogen‐bonded carbonyl groups in the molten state were made with Fourier transform infrared spectroscopy for all systems, and good correlations between thermal behaviors and infrared results were observed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1348–1359, 2001     

Miscible blends of nitro‐substituted polybenzimidazole and polyetherimide

A novel blend system was prepared by blending organosoluble nitro‐substituted polybenzimidazole (NO₂‐PBI) and polyetherimide (PEI) in a cosolvent at a moderate condition. It was shown that the NO₂‐PBI/PEI blends not only possess tractable processability owing to the enhanced solubility of NO₂‐PBI but also retain the desirable features of unmodified PBI/PEI blends. Apparent miscibility in the blends was observed and attributed to hydrogen‐bonding interactions between N? H groups in NO₂‐PBI and carbonyl groups in PEI. It was revealed that the NO₂‐PBI/PEI blends phase‐separate upon heating above the glass‐transition temperatures. The observed mixing of NO₂‐PBI and PEI in a molecular level, although sustainable only in the glassy region, was shown to lend synergy effects to the physical properties of the blends. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1778–1783, 2001     

Effects of organophilic montmorillonite on hydrogen bonding, free volume and glass transition temperature of epoxy resin/polyurethane interpenetrating polymer networks

Epoxy resin nanocomposites containing organophilic montmorillonite (oM) and polyurethane were prepared by adding oM to interpenetrating polymer networks (IPNs) of epoxy resin and polyurethane (EP/PU). The dispersion degree of oM in EP/PU matrix was characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Fourier transform infrared spectrometry (FT-IR) showed that strong interactions existed between oM and EP/PU matrix, and oM had some effect on hydrogen bonding of these EP/PU IPNs nanocomposites. Positron annihilation spectroscopy (PALS) and differential scanning calorimetry (DSC) measurements were used to investigate the effect of oM and PU contents on free volume and glass transition temperature (T_g) of these nanocomposites. The PALS and DSC results clearly showed that the presence of oM led to a decrease in the total fractional free volume, which was consistent with increasing T_g upon addition of oM, ascribed to increasing hydrogen bonding in interfacial regions of oM and EP/PU matrix and enhancing the miscibility between EP phase and PU phase. In addition, with increasing PU content, the total fractional free volume increased, corresponding to decreasing T_g.     

Miscibility and intermolecular specific interactions in thermosetting blends of bisphenol S epoxy resin with poly(ethylene oxide)

Thermosetting blends composed of phloroglucinol‐cured bisphenol S epoxy resin and poly(ethylene oxide) (PEO) were prepared via the in situ curing reaction of epoxy in the presence of PEO, which started from initially homogeneous mixtures of diglycidyl ether of bisphenol S, phloroglucinol, and PEO. The miscibility of the blends after and before the curing reaction was established on the basis of thermal analysis (differential scanning calorimetry). Single and composition‐dependent glass‐transition temperatures (T_g's) were observed for all the blend compositions after and before curing. The experimental T_g's could be explained well by the Gordon–Taylor equation. Fourier transform infrared spectroscopy indicated that there were competitive hydrogen‐bonding interactions in the binary thermosetting blends upon the addition of PEO to the system, which was involved with the intramolecular and intermolecular hydrogen‐bonding interactions, that is, OH···O?S, OH···OH, and OH, versus ether oxygen atoms of PEO between crosslinked epoxy and PEO. On the basis of infrared spectroscopy results, it was judged that from weak to strong the strength of the hydrogen‐bonding interactions was in the following order: OH···O?S, OH···OH, and OH versus ether oxygen atoms of PEO. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 359–367, 2005     

Miscibility behavior and hydrogen bonding in blends of poly(vinyl phenyl ketone hydrogenated) and poly(2‐ethyl‐2‐oxazoline)

The miscibility behavior of poly(2‐ethyl‐2‐oxazoline) (PEOx)/poly(vinyl phenyl ketone hydrogenated) (PVPhKH) blends was studied for the entire range of compositions. Differential scanning calorimetry and thermomechanical analysis measurements showed that all the PEOx/PVPhKH blends studied had a single glass‐transition temperature (T_g). The natural tendency of PVPhKH to self‐associate through hydrogen bonding was modified by the presence of PEOx. Partial IR spectra of these blends suggested that amide groups in PEOx and hydroxyl groups in PVPhKH interacted through hydrogen bonding. This physical interaction had a positive influence on the phase behavior of PEOx/PVPhKH blends. The Kwei equation for T_g as a function of the blend composition was satisfactorily used to describe the experimental data. Pure‐component pressure–volume–temperature data were also reported for both PEOx and PVPhKH. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 636–645, 2004     

A novel ionic‐conduction mechanism based on polyurethane electrolyte

A series of poly(ethylene glycol)–polyurethane (PEG–PU)/sodium perchlorate (NaClO₄) solid electrolytes were prepared, and their properties were characterized with Fourier transform infrared spectroscopy, differential scanning calorimetry, complex impedance analysis, and atomic force microscopy. Results showed that the oxygen atoms of carbonyl and ether oxygen groups had different activities on cations. Both carbonyl and ether oxygen groups participated in the ionic‐transport process in PU‐based electrolytes. There existed a coordination competition between sodium cations and different oxygen atoms in soft and hard segments of PU. For the PEG–PU/NaClO₄ system investigated, amorphous regions and interfacial regions between the amorphous and microcrystalline phases were responsible for ionic conduction. A new ionic‐transport mechanism, based on the existence of conduction pathways not only in amorphous regions but also in interfacial regions of microphase‐separated PU‐based electrolytes, is sketched. Moreover, at a particular concentration of doped salt (EO/NaClO₄ 12), the PEG–PU/NaClO₄ complex revealed a phase‐transition point in the morphology and exhibited minimum apparent activation energy and maximum ionic conductivity. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 1246–1254, 2001     

Hydrophilic nanocomposites based on polyurethane/poly(2‐hydroxyethyl methacrylate) semi‐IPNs and modified/unmodified nanosilica for biomedical applications

Nanocomposites based on sequential semi‐interpenetrating polymer network (semi‐IPN) of cross‐linked polyurethane and linear poly(2‐hydroxyethyl methacrylate) with 0.25 and 3 wt % of nanosilica filler were prepared and investigated. The unmodified silica, carboxyl‐modified, and amino‐modified silica were used in an attempt to control the microphase separation of the polymer matrix by polymer–filler interactions. A variety of experimental techniques were used to study morphology, thermal transitions, mechanical properties, and polymer dynamics of the nanocomposites. Special attention was paid to the investigation of the hydration properties of the nanocomposites in the perspective of biomedical applications. The results show that the good hydration properties of the semi‐IPN matrix are preserved in the nanocomposites. Effects of water on polymer dynamics were found to be particularly pronounced for the secondary β_sw,_PHEMA and the β_PU relaxations, in agreement with interpretations in terms of hydrogen bonding interactions with specific groups in the structure of the two polymers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 397–408     

Preparation,characterization, and properties of novolac‐type phenolic/SiO2 hybrid organic–inorganic nanocomposite materials by sol–gel method

This article describes the preparation of novolac‐type phenolic resin/silica hybrid organic–inorganic nanocomposite, with a sol–gel process. The coupling agent was used to improve the interface between the organic and inorganic phases. The effect of the structure of the nanocomposite on its physical and chemical properties is discussed. The coupling agent reacts with the resin to form covalent bonds. The structure of the modified hybrid nanocomposites was identified with a Fourier transform infrared spectroscope. The silica network was characterized by nuclear magnetic resonance imaging (²⁹Si NMR). Results revealed that Q₄ (tetrasubstituted) and T₃ (trisubstituted) are the dominant microstructures. The size of the silica in the phenolic resin was characterized with a scanning electron microscope. The size of the particles of inorganic silica in the modified system was less than 100 nm. The nanocomposite exhibited good transparency. Moreover, the thermal and mechanical properties exhibited significant improvement. The modified hybrid composite exhibited favorable thermal properties. The temperature at which a weight loss of 5% occurred increased from 281 to 350 °C. The flexural strength increased by 6–30%. The limiting oxygen index of the nanocomposite reached 37, and the Underwriters Laboratory test was 94V‐0. Consequently, these materials possess excellent flame‐retardant properties. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 905–913, 2003     

Morphology and crystallization kinetics of dilute binary blends of two monodisperse n‐alkanes with a length ratio of two

The crystallization kinetics and morphologies of dilute binary blends of the monodisperse alkane n‐C₁₂₂H₂₄₆ in n‐C₂₄₆H₄₉₄ and vice versa have been investigated. With a molecular length ratio close to two, this pair of n‐alkanes does not produce permanent cilia when once‐folded C₂₄₆H₄₉₄ molecules cocrystallize with extended chains of C₁₂₂H₂₄₆. In this condition, the supplementary splaying of adjacent dominant lamellae and the consequently more spherulitic textures, which are present in previous blends for which a longer guest molecule gives permanent cilia, are absent, although other features of blend crystallization remain. Specifically, the isothermal radial growth rate is constant for cocrystallizing blends, although less than for their pure hosts, but becomes nonlinear with cellulation when C₁₂₂H₂₄₆ forms a segregated population within extended‐chain C₂₄₆H₄₉₄. Increased nucleation in the blends give smaller scale textures than for the host materials, but the presence of a second component reduces splaying and thereby disfavors spherulitic growth. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2874–2887, 2001     

Spontaneous thinning/thickening deformation observed for plastic blend films and some factors affecting film deformation

The fully amorphous films of highly syndiotactic poly[(R,S)‐3‐hydroxybutyrate] (s‐PHB)/atactic poly(4‐vinylphenol) (PVPh) blends show reversible thinning/thickening phenomena at 37 °C in aqueous medium. On the other hand, isotactic poly[(R)‐3‐hydroxybutyrate] (i‐PHB)/PVPh blend film, in which i‐PHB blend component was partially crystalline, did not show any thinning/thickening phenomena under the same conditions. To elucidate the factors influencing these phenomena, the structure and molecular interaction in these blends were characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry, and wide‐angle X‐ray diffraction. The FTIR spectra indicated that the ester carbonyl of PHB and the phenolic hydroxyl of PVPh formed hydrogen bonds in both the thinned and thickened s‐PHB/PVPh blend films. The blend composition, intermolecular hydrogen‐bonding interaction, crystallization behavior, miscibility, and the glass‐transition temperature of the blends affected the thinning/thickening phenomena. Some other polyesters such as poly(?‐caprolactone), poly (L‐lactic acid), atactic poly(D,L‐lactic acid), and poly(ethylene terephthalate) had no ability to exhibit thinning/thickening phenomena in water at 37 °C when they were blended with PVPh. This result implies that s‐PHB/PVPh is the rare example with the ability to show reversible thinning/thickening phenomena. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2736–2743, 2002     

Thermal,mechanical and electroactive shape memory properties of polyurethane (PU)/poly (lactic acid) (PLA)/CNT nanocomposites

Polymer blend nanocomposites based on thermoplastic polyurethane (PU) elastomer, polylactide (PLA) and surface modified carbon nanotubes were prepared via simple melt mixing process and investigated for its mechanical, dynamic mechanical and electroactive shape memory properties. Chemical and structural characterization of the polymer blend nanocomposites were investigated by Fourier Transform infrared (FT-IR) and wide angle X-ray diffraction (WAXD). Loading of the surface modified carbon nanotube in the PU/PLA polymer blends resulted in the significant improvement on the mechanical properties such as tensile strength, when compared to the pure and pristine CNT loaded polymer blends. Dynamic mechanical analysis showed that the glass transition temperature (T_g) of the PU/PLA blend slightly increases on loading of pristine CNT and this effect is more pronounced on loading surface modified CNTs. Thermal and electrical properties of the polymer blend composites increases significantly on loading pristine or surface modified CNTs. Finally, shape memory studies of the PU/PLA/modified CNT composites exhibit a remarkable recoverability of its shape at lower applied dc voltages, when compared to pure or pristine CNT loaded system.     

Synthesis and ionic conductivity of hyperbranched poly(glycidol)

A novel hyperbranched poly(glycidol) (HPG) was prepared and characterized. The synthesized HPG was used as a substrate of a polymer electrolyte. The ionic conductivity of a blend of HPG, polyurethane (PU), and salt was studied. The ionic conductivity of HPG/PU/LiClO₄ was about 6.6 × 10^?6 S · cm^?1 at 20 °C and 6.3 × 10^?4 S · cm^?1 at 60 °C. The results indicated that HPG showed higher solubility for salt than linear polyether when both had the same [O]/[Li⁺] molar ratio. The main reason was that more cavities and a lower degree of chain entanglement in HPG resulted in a lower glass‐transition temperature and were beneficial for decreasing the aggregation of salt or enhancing the ionic conductivity. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2225–2230, 2001     

Intramolecular hydrogen bonding and calixarene-like structures in p-cresol/formaldehyde resins

The nature of the strong hydrogen bonds found in p-cresol/formaldehyde (PCF) resins, compared to ordinary phenolic compounds, is studied. The evidence from FTIR spectroscopy indicates that this strong interaction is due to intramolecular hydrogen bonding from “calixarene-like” structures. The formation of this structure in PCF is enabled by its “linear” (all-ortho-linkage) structure, which is not present in branched resins. Additionally, a transition is observed at around 175 to 200°C where the intramolecular hydrogen bonded structure is lost. This structure cannot be recovered upon cooling or annealing due to restrictions on conformational rotations that are coupled to a new pattern of intermolecular hydrogen bonding. However, the structure is reformed by dissolving the resin in solution and casting new films.     

Phase behavior of ternary poly‐(2‐vinylpyridine)/poly‐(N‐vinyl‐2‐pyrrolidone)/bis‐(4‐hydroxyphenyl)methane blends

The phase behavior of ternary poly‐(2‐vinylpyridine) (P2VPy)/poly‐(N‐vinyl‐2‐pyrrolidone) (PVP)/bis‐(4‐hydroxyphenyl)methane (BHPM) blends was studied. Fourier transform infrared spectroscopic examinations demonstrated that BHPM interacts with P2VPy and PVP through hydrogen‐bonding interactions. The addition of a sufficiently large amount of BHPM transformed an opaque blend with two glass‐transition temperatures (T_g's) to a transparent single‐T_g blend. Scanning electron microscopic studies showed that the transparent single‐T_g blend is micro‐phase‐separated at a scale of about 30 nm. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1815–1823, 2001     

Effects of graphene quantum dot (GQD) on photoluminescence,mechanical, thermal and shape memory properties of thermoplastic polyurethane nanocomposites

A group of shape memory polyurethane‐based nanocomposites containing graphene quantum dot nanoparticles (GQDs) were prepared via in‐situ polymerization method. GQD nanoparticles were synthesized by a facile and rapid microwave‐assisted method and characterized by Fourier‐transform infrared spectroscopy (FTIR), X‐ray diffraction pattern, field emission scanning microscopy, transmission electron microscopy, and fluorescence analysis. Chemical structure and hydrogen bonding index (HBI_[C=O]) of the nanocomposites were analyzed via FTIR spectra. The results show that the incorporation of GQDs in PU matrix reduces HBI_(C=O) of nanocomposites. Crystalline structure and thermal properties of the nanocomposites were investigated by differential scanning calorimetry. As results indicate, nucleation effect of GQDs raises crystallinity content of the samples. Mechanical examinations indicate that incorporation of GQDs improves Young's modulus of the nanocomposites, while their elongation at break values are reduced. In addition, shape memory analyses reveal that the presence of GQDs in PU matrix increases the shape fixity ratios in nanocomposites.     

Miscibility and hydrogen‐bonding interactions in blends of carbon dioxide/epoxy propane copolymer with poly(p‐vinylphenol)

The miscibility and hydrogen‐bonding interactions of carbon dioxide and epoxy propane copolymer to poly(propylene carbonate) (PPC)/poly(p‐vinylphenol) (PVPh) blends were investigated with differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy and X‐ray photoelectron spectroscopy (XPS). The single glass‐transition temperature for each composition showed miscibility over the entire composition range. FTIR indicates the presence of strong hydrogen‐bonding interassociation between the hydroxyl groups of PVPh and the oxygen functional groups of PPC as a function of composition and temperature. XPS results testify to intermolecular hydrogen‐bonding interactions between the oxygen atoms of carbon–oxygen single bonds and carbon–oxygen double bonds in carbonate groups of PPC and the hydroxyl groups of PVPh by the shift of C_1s peaks and the evolution of three novel O_1s peaks in the blends, which supports the suggestion from FTIR analyses. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1957–1964, 2002     

Effect of the repeated unit length of guest polymers on the molecular motion of polymer blends within a miscible window

The effect of the repeated unit length on the substantially increasing molecular motion and entropy change (?TΔS_m) of polymer blends was investigated with solid‐state ¹³C NMR and differential scanning calorimetry within a miscible window. The hydrogen‐bonding strength, from the formation of the phenolic–polyester interaction, was not high enough to overcome the breaking‐off of the self‐association of the phenolic. With respect to the increasing repeated unit length, the polyester resonance intensity of the solid‐state ¹³C NMR spectra was weakened because of the reduction in the cross‐polarization efficiency in highly mobile samples. The glass‐transition temperature of the blend and the proton spin–lattice relaxation time from NMR experiments were also reduced. The effect of the reduced hydrogen‐bonding strength on blending brought about a tendency of higher entropy (?TΔS_m) and higher molecular mobility of the blend. Accordingly, poly(decamethylene adipate) possessed the longest repeated unit length and exhibited the most mobile one in this phenolic/polyester blend family. The molecular segmental motion and entropy progressively increased while the repeated unit length of the guest polymers increased within a miscible window. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 679–686, 2003     

Synthesis of self‐healing polyurethane urea‐based supramolecular materials

Supramolecular polyurethane ureas are expected to have superior mechanical properties primarily due to the reversible, noncovalent interactions such as hydrogen bonding interactions. We synthesized polyurethane prepolymers from small molecular weight of poly(tetramethylene ether)glycol and isophorone diisocyanates, which were end capped with propylamine to synthesize polyurethane ureas with high contents of urea and urethane groups for hydrogen‐bonding formations to facilitate self‐healing. The effects of polyurethane urea molecular weight (3000 ≤ M_n ≤ 9000), crosslinking, and cutting direction were studied in terms of thermal, mechanical, and morphological properties with an emphasis on the self‐healing efficiency. It was found that the thermal self‐healability was more pronounced as the molecular weight of polyurethane urea decreased, showing a maximum of more than 96% with 3000 M_n when the sample was cut along the stretch direction. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 468–474