Oligomeric bisphenol A‐based PEEK‐like phthalonitrile‐cure and polymer properties

The cure behavior and properties of oligomeric bisphenol A‐based PEEK‐like phthalonitrile (PN) are thoroughly examined in this article. The resin is easily processed from the melt at a relatively low temperature (150–200 °C) and the monomer cure occurs in a controlled manner as a function of the amine content and processing thermal conditions. Dynamic mechanical measurements and thermogravimetric analysis show that the polymer properties improve as the maximum PN postcure temperature is increased to 415 °C. The effects of the amine and polymer postcure conditions on the flexural and tensile properties of the PN polymer are investigated. The mechanical properties of the polymer are maximized after postcuring to moderate temperatures (330–350 °C). The polymer exhibits an average flexural strength and tensile strength at break of 117 and 71 MPa, respectively. After oxidative aging at 302 °C for 100 h, the polymer retains excellent mechanical properties. The average flexural and tensile strength retention of the polymers are 81 and 75%, respectively. Microscale calorimetric measurements reveal that the flammability parameters of the oligomeric PN are low compared to other thermosets. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3769–3777     

Synthesis and characterization of a novel polytriazole resin with low‐temperature curing character

A novel low‐temperature curing polytriazole resin was prepared from a triazide and a tetraalkyne and characterized. The resin can be cured at 70°C. The glass transition temperature T_g and thermal decomposition temperature T_d5 of the cured resin with the molar ratio of azide to alkyne group [A]/[B] = 1.0:1.0 reached 324 and 355°C, respectively. The study on the curing kinetics of the resin shows that the apparent activation energy of the curing reaction is 93 kJ mol^?1. The flexural strength of the cured resin reached 137.6 MPa at room temperature and 102.6 MPa at 185°C. Copyright © 2007 John Wiley & Sons, Ltd.     

Investigation of processing,thermal, and mechanical properties of a new composite matrix‐benzoxazine containing aldehyde group

A new benzoxazine aldehyde group containing monomer 3‐phenyl‐6‐formyl‐3, 4‐dihydro‐2H‐1, 3‐benzoxazine (Ald‐B) was synthesized via the Mannich reaction of formaldehyde, p‐hydroxybenzaldehyde, and aniline. The viscosities and curing behavior of the resins were studied. The results indicated that Ald‐B has an initial viscosity lower than 0.110 Pa s at 90°C and the maximum temperature of the exotherm was at 196°C. Dynamic mechanical analysis (DMA) of the copolymer of Ald‐B and methylenedianiline‐type bis‐benzoxazine (B‐BOZ) showed only one T_g of 251°C and high crosslink density in the matrix. The thermal stability of the copolymer was improved noticeably and the char yield at 800°C is 68.4%. The tensile strength and flexural strength of this resin cast are 72 and 137 MPa, respectively. Copyright © 2009 John Wiley & Sons, Ltd.     

Sintering behaviors of two porcelainized stoneware compositions using pegmatite and nepheline syenite minerals

Semi-vitreous bodies, with flexural strength of ~78 MPa and water absorption of ~0.4 % for the optimal maturated specimens, were successfully prepared with solid solutions of pegmatite and nepheline syenite, respectively, for the full dense (P) and relatively porous composition (G). Despite the similarity on the bulk chemical composition of the two formulations, it was found that their thermal behaviors were significantly affected by the action of CaO on the flux system considered leading to earlier vitrification of P specimens with high flexural strength as from 1,175 °C. Conversely, the flexural strength of G specimens increases progressively with soaking time and temperature development up to 1,225 °C. The positive action of 5 mass% of CaO in the vitrification range of pegmatite solution, the relative low temperature of maturation of the semi-vitreous matrices, and the results of water absorption allow us to describe the formulations studied to offer promising potential in the production of sustainable and low-cost porcelainized stoneware. The high strength of P at relatively low temperature could be explained by the matrix-strengthening theory, while the extent of crystallization of G could be ascribed to the mullite theory.     

Influence of heat treatment on electromagnetic properties of polyimide/carbon black composites

A kind of absorbing materials was prepared by hot pressing method using polyimide as matrix and carbon black (CB) as filler. The mechanical properties, the electromagnetic properties, and the thermal stability of polyimide/CB composites were studied. The results showed that the complex permittivity increased from 6.82 + 1.38i to 18.69 + 9.47i, whereas the flexural strength decreased from 108 MPa to 77 MPa, respectively, when the CB content increased from 2 wt% to 8 wt%. The reflection loss curves shifted to low frequency with increase of the thickness at the same content. The reflection loss below ?10 dB could be obtained in the X band with 6 wt% CB content and did not display significant difference before and after the heat treatment at 400°C for 5 h. When the content of CB was 8 wt%, the decomposition temperature (at 5% weight loss) increased approximately 42°C compared with pure polyimide matrix. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis and characterization of novel phenolic resins containing aryl‐boron backbone and their utilization in polymeric composites with improved thermal and mechanical properties

In the present study, a novel aryl‐boron‐containing phenolic resin named as PBPR has been synthesized from phenol and formaldehyde in the presence of phenylboronic acid. The chemical structure of the PBPR was confirmed by Fourier transform infrared, nuclear magnetic resonance and X‐ray photoelectron spectroscopy. The molecular weight, viscosity and curing behavior were examined to demonstrate that PBPRs have better processability than common boric acid‐modified phenolic resin. The thermal stability and fracture toughness of the cured PBPRs were greatly enhanced, where the char yield at 1000°C (nitrogen atmosphere) and the glass transition temperature reached 70.0% and 218°C, respectively. The excellent mechanical and ablative properties of the PBPR composites may have benefited from the good interfacial adhesion between the resin matrix and the reinforced fiber. The flexural strength and the linear ablative rate are 436.8 ± 5.2 MPa and 0.010 mm/sec, respectively. This study opens a new window for the preparation of high‐performance ablative composites by designing a resin matrix containing an aryl‐boron backbone. Copyright © 2013 John Wiley & Sons, Ltd.     

Changes in the mechanical properties of tooth-colored direct restorative materials in relation to time

The objective of this study was to determine the flexural strength, flexural modulus, Vickers hardness of a packable composite (Surefil), and an ormocer (Definite) in comparison with a microhybrid composite (Z-100), a microfil composite (Silux Plus) and a polyacid-modified composite resin (Dyract). Flexural strength and flexural modulus were determined using a three-point bending device. Microhardness was measured with a Vickers indentor. The specimens of each material were prepared according to manufacturer's instructions. The specimens were stored in artificial saliva at pH 6, all at 37°C. The groups were tested at the beginning of the test, at 3 months and at 6 months. Flexural strength values of Surefil and Definite showed a progressive increase. The highest MPa values were determined for Surefil (134.4 MPa) and the lowest MPa values were obtained for Dyract (59.6 MPa). The highest flexural modulus values were revealed for Surefil (10.000 GPa). Z-100, Silux Plus and Definite showed a tendency to decline in relation to time for their flexural modulus. GPa values of Silux Plus were stable at 3 and 6 months. Vickers hardness numbers showed that Surefil was the hardest and Dyract was the weakest material. Copyright © 2003 John Wiley & Sons, Ltd.     

尼龙6,6膜的电驱动透过性

电驱动条件下膜分离性能的研究对膜在微流控芯片等微小器件中的应用具有重要的指导意义.研究了界面聚合的尼龙6,6膜的电驱动分离性能,并考察了电场强度、通电时间和温度等操作条件对SO42-和Cl-离子透过性能的影响.结果表明尼龙6,6膜具有较好的SO24-和Cl-离子透过性能,并且透过性能差异不大,离子透过百分比随电场强度和通电时间的增加而增加,而随温度的增加基本保持不变.而对FITC标记的甘氨酸和赖氨酸则能完全截留,截留分子量在500左右,具有部分纳滤膜性质.该膜可望应用于微型器件中氨基酸等有机与生物大分子的电驱动分离和浓缩.     

Mechanical properties and fracture behaviors of C/C composites with PyC/TaC/PyC,PyC/SiC/TaC/PyC multi-interlayers

Carbon/carbon (C/C) composites with PyC/TaC/PyC or PyC/SiC/TaC/PyC multi-interlayers were prepared by isothermal chemical vapor infiltration, followed by Furan resin impregnation and carbonization. Microstructures, mechanical properties including flexural strength, ductile displacement, and fracture behaviors of composites were studied. Furthermore, composites were heat treated at 2000 °C to study the effects of heat treatment on mechanical properties and fracture behaviors. PyC/TaC/PyC and PyC/SiC/TaC/PyC multi-interlayers have been deposited uniformly in C/C composites. With the introduction of PyC/TaC/PyC multi-interlayers in C/C composites, the flexural strength decreases; however, the ductile displacement increases. The fracture behavior changes from brittleness (0% TaC) to pseudo-ductility (5% TaC) and high toughness (10% TaC). When PyC/SiC/TaC/PyC multi-interlayers are introduced in C/C composites, the flexural strength is improved remarkably from 270 MPa to 522 MPa, but the ductile displacement decreases obviously from 0.49 mm to 0.24 mm, and the fracture behavior becomes brittle again. After heat treatment at 2000 °C, the flexural strength decreases, but the ductile displacement increases and pseudo-ductility or high toughness can be obtained.     

High temperature properties of MDF composite based on calcium aluminate cement and polyvinyl alcohol

The macro-defect-free composites belong to the well-known group of promising materials consisting of inorganic binder and organic polymer. MDF composites exhibit unusual mechanical properties, especially the flexural strength that can reach over 200 MPa. Moreover, the MDF composites based on calcium aluminate cement have a good temperature resistance because of the Al₂O₃ content in the cement. This paper deals with the preparation and high temperature characterization of MDF composite based on calcium aluminate cement combined with polyvinyl alcohol that could enable its utilization as a refractory material in industrial kilns. The composition of the MDF mixture has been optimized for an easy high-shear processing and flexural strength of the resulting 7-days cured material has been studied under laboratory condition and after heating at 240, 300, 600, 1,000, and 1,500 °C. The structure changes during the heating have been observed by SEM and the course of processes during the heating has been investigated by TG–DTA–EGA, TMA and heating microscopy.     

Polyamide‐6,6‐based blocky copolyamides obtained by solid‐state modification

Copolyamides based on polyamide‐6,6 (PA‐6,6) were prepared by solid‐state modification (SSM). Para‐ and meta‐xylylenediamine were successfully incorporated into the aliphatic PA‐6,6 backbone at 200 and 230 °C under an inert gas flow. In the initial stage of the SSM below the melting temperature of PA‐6,6, a decrease of the molecular weight was observed due to chain scission, followed by a built up of the molecular weight and incorporation of the comonomer by postcondensation during the next stage. When the solid‐state copolymerization was continued for a sufficiently long time, the starting PA‐6,6 molecular weight was regained. The incorporation of the comonomer into the PA‐6,6 main chain was confirmed by size exclusion chromatography (SEC) with ultraviolet detection, which showed the presence of aromatic moieties in the final high‐molecular weight SSM product. The occurrence of the transamidation reaction was also proven by ¹H nuclear magnetic resonance (NMR) spectroscopy. As the transamidation was limited to the amorphous phase, this SSM resulted in a nonrandom overall structure of the PA copolymer as shown by the degree of randomness determined using ¹³C NMR spectroscopy. The thermal properties of the SSM products were compared with melt‐synthesized copolyamides of similar chemical composition. The higher melting and higher crystallization temperatures of the solid state‐modified copolyamides confirmed their nonrandom, block‐like chemical microstructure, whereas the melt‐synthesized copolyamides were random. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5118–5129     

Thermal and mechanical properties of electrospun PMMA,PVC, Nylon 6, and Nylon 6,6

Poly(methyl methacrylate) (PMMA), poly(vinyl chloride) (PVC), Nylon 6, and Nylon 6,6 have been electrospun successfully. The nanofibers have been characterized by scanning electron microscopy (SEM), confirming the presence of bead free and fiber‐bead free morphologies. Thermogravimetric analysis (TGA) indicated differences between the thermal stability of PMMA nanofibers and PMMA powder. However, no significant differences were observed between the starting physical form (powder or pellet) of PVC, Nylon 6 and Nylon 6,6, and their corresponding electrospun nanofibers. Differential scanning calorimetry (DSC) demonstrated a lower glass transition temperature (T_g) and water absorption for PMMA electrospun nanofibers. Furthermore, electrospun Nylon 6 and Nylon 6,6 had a slight decrease in crystallinity. Tensile testing was performed on the electrospun nanofibers to obtain the Young modulus, peak stress, strain at break, and energy to break, revealing that the non‐woven mats obtained had modest mechanical properties that need to be enhanced. Copyright © 2007 John Wiley & Sons, Ltd.     

Effect of temperature and volume on the tensile and adhesive properties of photocurable resins

Knowing the mechanical properties of UV‐curable resins at cryogenic conditions is important to ongoing fusion‐energy research and to emerging aerospace applications. The tensile and interfacial shear strengths of two commercially available UV‐curable resins were measured at room‐temperature and cryogenic conditions for both bulk and reduced (subnanoliter) specimen volumes. The tensile properties of cured specimens are remarkably sensitive to both testing temperature and specimen size. For one type of resin, the cold (?150 °C) tensile strength of subnanoliter specimens is ～9× larger (179 ± 19 MPa) than bulk values at room temperature. The interfacial shear strength between SiC fibers and small volumes of resin volumes is comparable to the bulk, room‐temperature tensile strength, but it varies over a wide range at ?150 °C (15–53 MPa). All resins were fully cured, and an analysis of fractured surfaces revealed microstructural features. The enhanced strength in microscopic specimens may be related to inhomogeneous stress fields that develop during cure. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 936–945     

6,6′‐Dimethoxygossypolone

6,6′‐Dimethoxygossypolone (systematic name: 7,7′‐dihydroxy‐5,5′‐diisopropyl‐6,6′‐dimethoxy‐3,3′‐dimethyl‐1,1′,4,4′‐tetraoxo‐2,2′‐binaphthalene‐8,8′‐dicarbaldehyde), C₃₂H₃₀O₁₀, is a dimeric molecule formed by oxidation of 6,6′‐dimethoxygossypol. When crystallized from acetone, 6,6′‐dimethoxygossypolone has monoclinic (P2₁/c) symmetry, and there are two molecules within the asymmetric unit. Of the four independent quinoid rings, three display flattened boat conformations and one displays a flattened chair/half‐chair conformation. The angles between the planes of the two bridged naphthoquinone structures are fairly acute, with values of about 68 and 69°. The structure has several intramolecular O—H...O and C—H...O hydrogen bonds and several weak intermolecular C—H...O hydrogen bonds, but no intermolecular O—H...O hydrogen bonds.     

Synthesis and properties of poly(amic acid)s and polyimides based on 2,2′,6,6′‐biphenyltetracarboxylic dianhydride

Poly(amic acid)s (PAAs) having the high solution stability and transmittance at 365 nm for photosensitive polyimides have been developed. PAAs with a twisted conformation in the main chains were prepared from 2,2′,6,6′‐biphenyltetracarboxylic dianhydride (2,2′,6,6′‐BPDA) and aromatic diamines. Imidization of PAAs was achieved by chemical treatment using trifluoroacetic anhydride. Among them, the PAA derived from 2,2′,6,6′‐BPDA and 4,4′‐(1,3‐phenylenedioxy)dianiline was converted to the polyimide by thermal treatment. The heating at 300 °C under nitrogen did not complete thermal imidization of PAAs having glass‐transition temperatures (T_g)s higher than 300 °C to the corresponding PIs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6385–6393, 2006     

Intramolecular friedel‐crafts cyclization and subsequent hydrogenation of styrene‐isoprene random copolymers prepared by anionic polymerization for thermally‐resistant and optical applications

To synthesize novel thermally and optically high‐performing thermoplastics from commodity monomers, random styrene (St)‐isoprene (Ip) rubbers (r‐SIRs) prepared by anionic copolymerization were subjected to intramolecular Friedel‐Crafts cyclization and subsequent hydrogenation via a sequence of simple postpolymerization modifications. The CF₃SO₃H‐catalyzed Friedel‐Crafts alkylation of r‐SIR afforded cyclized r‐SIR (C‐r‐SIR) via the predominant formation of bicyclic tetrahydronaphthyl units to give thermoplastics with a high glass transition temperature (T_g ～130 °C), good mechanical properties, and good transparency. Subsequent hydrogenation of the small amount of remaining C?C double bonds in the uncyclized Ip units and cyclized Ip‐Ip units yielded hydrogenated C‐r‐SIR (HC‐r‐SIR) and increased the degradation temperature by about 15 °C (T_d5 ≥ 380 °C). These HC‐r‐SIRs display good flexural moduli and strength, good transparency, and refractive indices similar to those of C‐r‐SIR. The birefringence of HC‐r‐SIR was successfully tuned by adjusting the comonomer content to obtain near‐zero birefringence high‐performance plastics. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Tensile deformation of electrospun nylon‐6,6 nanofibers

Nylon‐6,6 nanofibers were electrospun at an elongation rate of the order of 1000 s^?1 and a cross‐sectional area reduction of the order of 0.33 × 10⁵. The influence of these process peculiarities on the intrinsic structure and mechanical properties of the electrospun nanofibers is studied in the present work. Individual electrospun nanofibers with an average diameter of 550 nm were collected at take‐up velocities of 5 and 20 m/s and subsequently tested to assess their overall stress–strain characteristics; the testing included an evaluation of Young's modulus and the nanofibers' mechanical strength. The results for the as‐spun nanofibers were compared to the stress–strain characteristics of the melt‐extruded microfibers, which underwent postprocessing. For the nanofibers that were collected at 5 m/s the average elongation‐at‐break was 66%, the mechanical strength was 110 MPa, and Young's modulus was 453 MPa, for take‐up velocity of 20 m/s—61%, 150 and 950 MPa, respectively. The nanofibers displayed α‐crystalline phase (with triclinic cell structure). © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1482–1489, 2006     

Preparation and properties of aramid/layered silicate nanocomposites by solution intercalation technique

Polymer—clay nanocomposites were synthesized from aromatic polyamide and organoclay using the solution intercalation technique. Polyamide chains were produced through the reaction of 4,4′‐oxydianiline (ODA) and isophthaloyl chloride (IPC) in N, N′‐dimethyl acetamide, using stoichiometry yielding chains with carbonyl chloride end groups. The intercalation of sodium montmorillonite (Na‐MMT) was carried out using p‐phenylene diamine as a swelling agent through an ion exchange reaction. Different concentrations of organoclay were blended with the polyamide solution for complete dispersion of clay throughout the matrix. The resulting composite films were characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM), mechanical testing, thermogravimetry (TGA), differential scanning calorimetry (DSC) and water absorption measurements. The XRD pattern and morphology of the nanocomposites revealed the formation of exfoliated and intercalated clay platelets in the matrix. The film containing a small amount of clay was semitransparent and had a tensile strength of the order of 70 MPa (relative to the 52 MPa of the pure aramid). Thermal decomposition temperatures were in the range of 300–450°C and the weight of the samples remaining after heating to 900°C was found to be roughly proportional to the clay loading. DSC showed a systematic increase in the glass transition temperature with increase in clay content. Water absorption of the pristine aramid film was rather high (5.7%), which reduced upon loading of organoclay. Copyright © 2008 John Wiley & Sons, Ltd.     

Fire resistance properties of heavyweight magnetite concrete in comparison with normal basalt- and quartz-based concrete

Nowadays application of radiation shielding structures grows over the world. Nuclear buildings represent one of the most complicated radiation shielding structures; that is why a particular type of concrete is required to withstand different conditions during their lifespan. Unique properties such as the behaviour under elevated temperatures, radiation shielding, and thermal stability properties are essential to guarantee the fire resistance safety of nuclear buildings. However, some gaps are still there, warranting further investigation, particularly the thermal stability and fire-resistance properties of the heavyweight concrete. The properties are mechanical, physical, and deformation properties of concrete after being subjected to elevated temperature. This paper investigated the fire resistance properties of three concrete mixes. There were magnetite-based concrete, basalt-based concrete, and quartz-based concrete. Compressive and flexural strength, spalling, mass loss, porosity, and scanning electron microscopy were measured for the three concrete types after being subjected to different temperature steps at 20, 150, 300, 500, and 800 °C. The three types of concrete showed different fire resistance properties. Magnetite-based concrete has better heat/fire resistance than basalt- and quartz-based concrete; there was no significant change up to 500 °C, and explosive spalling occurred at 800 °C. Correspondingly, the maximum change in porosity and reduction in the compressive and flexural strength occurred at 300 °C, which indicates the good thermal stability of magnetite-based concrete. Concerning basalt-based and quartz-based concretes, cracks were observed at 500 °C, and cracks with colour change and small spalling were initiated at 800 °C. Therefore, the maximum growth in the porosity and the high reduction in the compressive and flexural strength in basalt-based concrete occurred at 800 °C. Likewise, the extreme change in the porosity occurred at 500 °C, and the drastic reduction in the compressive and the flexural strength in the quartz-based concrete was relatively high at 500 °C and 800 °C. The SEM observations and analysis obtained the appearance of microcracks, voids and degradation of C-S-H in different concrete mixes at 500 and 800℃.

     

Effect of hydrothermal curing on early hydration of G-Oil well cement

G-Oil well cement has been cured under standard and hydrothermal conditions with different steam pressures and temperatures. Compressive strength, pore structure parameters, microstructure, and hydrated products were evaluated after 7 days curing by using SEM, MIP, and simultaneous TGA/DSC. Obtained results showed that 7 days aged sample cured under standard conditions has the highest compressive strength with compact pore structure and hydrated products similar to those found after hydration of Ordinary Portland cement. With increasing temperature and pressure from standard conditions (25 °C, 10125 Pa) to hydrothermal ones (150 °C and 0.3 MPa, 200 °C and 1.2 MPa), compressive strength has drastically decreased from 77.5 ± 2.0 to 20.5 ± 1.0 MPa due to the transformation of original hydrated products (C–S–H) to crystallized α-C₂SH and C₆S₂H₃. The crystallization has led, under hydrothermal curing, to the increase of permeability and pore structure depletion. The final compressive strength after curing for 7 days at 150 °C (51.8 ± 2.0 MPa) and 200 °C (20.5 ± 1.0 MPa), which significantly exceeds the recommended values of 3.45 MPa according to API to hold many casings of oil wells is questionable for application in geothermal ones.