Efficient synthesis of an imidazole-substituted delta-amino acid by the integration of chiral technologies

Two methods to produce (2S)-5-amino-2-(1-n-propyl-1H-imidazol-4-ylmethyl)-pentanoic acid were investigated. Diastereoisomeric salt resolution, using the quinidine salt, gave the desired intermediate in 98% ee and 33% yield. Asymmetric hydrogenation of various substrates gave high conversions, with up to 83% ee. Integration of these two approaches via asymmetric hydrogenation of a quinidine salt substrate followed by crystallization provided the desired intermediate in 94% ee and 76% yield.     

Mercury(II) mediated cyclisation of R-1-(1′-hydroxyethyl)-2-(1″-propenyl)-3-alkoxy-4-methoxybenzenes to chiral isochromanes

A protocol has been established for the transformation of chiral ortho 1-hydroxyethyl propenyl benzenes under both anaerobic and oxidative mercury(II) mediated conditions to produce chiral isochromanes. Further transformations of the former products yielded chiral isochromanquinones, while the latter afforded the corresponding chiral 4-hydroxyisochromanquinones.     

Copper(I) iodide-catalysed arylation of acetoacetate to yield 2-arylacetic acid esters

The C-C coupling reaction between ethyl acetoacetate and aryl halides in the presence of CuI is described. The effects of solvent, ligands such as vicinal diamines and amino acids, base and temperature are reported. The arylated acetoacetate ester is deacylated under the reaction conditions resulting in the generation of 2-arylacetic acid esters, constituting a mild alternative to direct arylation of carboxylate esters.     

Automated determination of fatty acid methyl ester and cis/trans methyl ester composition of fats and oils

The determination of the fatty acid composition (as methyl esters, FAMEs) of fats and oils and their cis/trans (CTME) distribution requires a simple, but manual and time-consuming sample preparation. The so-called BF3 method is often the preferred procedure. Because FAME/CTME analyses are encountered very frequently in the food industry, an automated, robot-based alternative is proposed which uses the sodium methylate procedure. After sample weighing and the (manual) addition of heptane (2 min), a XYZ robotic autosampler is used for all remaining work, which includes reagent addition, agitation, sample settling and the final injection into the gas chromatograph (10 min). The performance of the sodium methylate and BF3 methods are compared by analysing some 30 oil and fat samples. The novel procedure is much faster (less than 15 min versus ca. 1 h) and manual sample handling is drastically decreased. The experimental results obtained with the two methods frequently are the same, while small differences can be explained by (known) differences of the two methods in the conversion of minor oil/fat constituents, such as free fatty acids, wax esters and sterol esters. In case of FAME analyses, a hot injection is to be preferred over a cold injection. The RSDs of the peak areas were 1.5% for the major fatty acids to 11% for peaks that were just above the noise level. The detection limit were approximately 0.03%.     

Sequential isomerization and ring-closing metathesis: masked styryl and vinyloxyaryl groups for the synthesis of benzo-fused heterocycles

The use of an aryl allyl ether and an arylallyl group as masked vinyl ether and 1-propenylphenyl groups for ring-closing metathesis (RCM) leading to the synthesis of benzo-fused heterocycles was demonstrated by using a ruthenium-mediated isomerization followed by a ruthenium-mediated RCM reaction. This resulted in the syntheses of a variety of products including two substituted benzo[1,4]dioxins, a naphtho[2,3-b][1,4]dioxin, a 2H-chromene and a benzo[b]furan.     

The bimolecular hydrogen-deuterium exchange behavior of protonated alkyl dipeptides in the gas phase

As part of an ongoing characterization of the intrinsic chemical properties of peptides, thermal hydrogen-deuterium exchange has been studied for a series of fast-atom-bombardment-generated protonated alkyldipeptides and related model compounds in the reaction with D₂O, CH₃OD, and ND₃ in a Fourier transform ion cyclotron resonance mass spectrometer. Despite the very large basicity difference between the dipeptides and the D₂O and CH₃OD exchange reagents, efficient exchange of all active hydrogen atoms occurs. From the kinetic data it appears that exchange of the amino, amide, and hydroxyl hydrogens proceeds with different efficiencies, which implies that the proton in thermal protonated dipeptides is immobile. The selectivity of the exchange at the different basic sites is governed by the nature of both the dipeptide and the exchange reagent. The results indicate that reversible proton transfer in the reaction complexes, which effectuates the deuterium incorporation, is assisted by formation of multiple hydrogen bonds between the reagents. Exchange is considered to proceed via the intermediacy of different competing intermediate complexes, each of which specifically leads to deuterium incorporation at different basic sites. The relative stabilization of the competing intermediate complexes can be related to the relative efficiencies of deuterium incorporation at different basic sites in the dipeptide. For all protonated dipeptides studied, the exchange in the reaction with ND₃ proceeds with unit efficiency, whereas all active hydrogen atoms are exchanged equally efficiently. Evidently specific multiple hydrogen bond formations are far less important in the reversible proton transfers with the relatively basic ammonia, which allows effective randomization of all active hydrogen atoms in the reaction complexes.     

ELLIPSOMETRY OF BLACK LIPID MEMBRANES OF EGG LECITHIN AND CHLOROPLAST EXTRACTS

Abstract— Ellipsometric angles and reflectivity of black lipid membranes containing either egg lecithin or chloroplast extracts were measured at a wavelength of 6328 Å. Evidence was found for positive uniaxial anisotropy in membranes of lecithin. If the thickness of those films is assumed to be 62 Å, the refractive index normal to the film surface is 1.471 ± 0.004, and the refractive index parallel to the film surface is 1.454 ± 0.003. The results for membranes of chloroplast extracts also indicate a positive anisotropy in the indices of absorption.     

A High Cell‐Bearing Capacity Multibore Hollow Fiber Device for Macroencapsulation of Islets of Langerhans

Macroencapsulation of islets of Langerhans is a promising strategy for transplantation of insulin‐producing cells in the absence of immunosuppression to treat type 1 diabetes. Hollow fiber membranes are of interest there because they offer a large surface‐to‐volume ratio and can potentially be retrieved or refilled. However, current available fibers have limitations in exchange of nutrients, oxygen, and delivery of insulin potentially impacting graft survival. Here, multibore hollow fibers for islets encapsulation are designed and tested. They consist of seven bores and are prepared using nondegradable polymers with high mechanical stability and low cell adhesion properties. Human islets encapsulated there have a glucose induced insulin response (GIIS) similar to nonencapsulated islets. During 7 d of cell culture in vitro, the GIIS increases with graded doses of islets demonstrating the suitability of the microenvironment for islet survival. Moreover, first implantation studies in mice demonstrate device material biocompatibility with minimal tissue responses. Besides, formation of new blood vessels close to the implanted device is observed, an important requirement for maintaining islet viability and fast exchange of glucose and insulin. The results indicate that the developed fibers have high islet bearing capacity and can potentially be applied for a clinically applicable bioartificial pancreas.     

Synthesis and mesogenic properties of several homologous series of aldose dialkyl dithioacetals. A model for their behaviour

Abstract

Ten homologous series (n-butyl through n-decyl) of aldose S,S-acetals (D-glucose, D-galactose, D-mannose, L-rhamnose, 2-deoxy-D-glucose, D-xylose, D-lyxose, D- or L-arabinose, D-ribose and 2-deoxy-D-ribose) have been prepared. Most of these compounds form thermotropic liquid crystals, the exceptions being the entire L-rhamnose series and some of the derivatives with the shortest alkyl chains. All of the compounds have been investigated with differential scanning calorimetry and polarization microscopy. Some temperature dependent powder X-ray data are also presented. A model is proposed which correlates the carbohydrate configuration with the melting behaviour. On the basis of now available behaviourial characteristics, visual inspection, mixing experiments and precedent, the mesophase is identified as smectic A_d, the partially overlapping carbohydrate moieties being in the centre and the aliphatic chains pointing outward at an angle of about 62°. Despite the intrinsic chirality of all the carbohydrate mesogens, no evidence for chiral mesophases was found, not even after introduction of a homochiral branched alkyl chain.     

Waterborne polyesters partially based on renewable resources

A new experimental approach for preparing biobased, water‐soluble polyesters (PEs) via titanium(IV) n‐butoxide‐catalyzed bulk polycondensation is presented. In the described method polymers were obtained from isosorbide, maleic anhydride and poly(ethylene glycol) (PEG). The chemical structure of the synthesized PEs was confirmed using 2D NMR spectroscopy and by titration methods. Careful analysis of 2D NMR spectra viz. correlation spectra (COSY), heteronuclear single quantum correlation spectra (HSQC) and heteronuclear multiple‐bond correlation spectra (HMBC) allowed to accomplish the complete proton assignment of isosorbide, PEG, and unsaturated acid residues in the PEs. Moreover, by using NMR spectroscopy the transformation of maleic anhydride into fumaric acid ester and the absence of maleic acid ester units in the final polymer were proven. However, during polycondensation part of the unsaturated bonds has reacted in a Michael addition with isosorbide or PEG. Gel permeation chromatography measurements revealed that the unsaturated PEs have M_n values in the range 3000–5000 g/mol. These PEs, with a low content of carboxylic acid end groups, exhibited sufficient thermal resistance for practical applications, for example, as free radical curable coatings. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010