聚去氢枞酸丙烯酸乙二醇酯的合成与表征

从歧化松香中提取的去氢枞酸(DHA)出发,经酰氯化后与丙烯酸(2-羟基)乙酯反应,合成了去氢枞酸丙烯酸乙二醇酯(DHAAGE);并以此为单体,偶氮二异丁腈(AIBN)为引发剂,四氢呋喃为溶剂,在60℃下,利用常规自由基聚合(CPR)法制备了聚去氢枞酸丙烯酸乙二醇酯(PDHAAGE)。考察了单体转化率随聚合时间的变化,并利用FT-IR1、H-NMR、GPC、TG和DSC等对PDHAAGE进行了分析和表征。同时考察了PDHAAGE在不同溶剂中的溶解性。结果表明,得到的PDHAAGE的数均分子量(Mn)约为5400,分子量分布小于1.40;Tg为95.8℃,Tm为375.8℃,热分解温度Td为396.4℃,说明PDHAAGE具有很好的热稳定性;PDHAAGE易溶于中等极性的有机溶剂中。     

去氢枞醇杂环类化合物的合成及细胞毒性研究

以去氢枞酸(1)为原料,经氢化铝锂还原得到去氢枞醇(2),2与氯乙酰氯在氮气保护和DMAP催化条件下反应合成中间产物去氢枞醇氯乙酸酯(3),3与杂环化合物经亲核取代反应合成了12个新型去氢枞醇杂环类化合物(4a ～41).利用IR、1H NMR、13C NMR和HR-MS等对目标化合物的结构进行表征,采用MTT法测试目...     

脂肪族二酸二烷基双去氢枞基双噁二唑的合成及除草活性

以去氢枞酸为原料,制备去氢枞酸酰氯.以脂肪族二酸为原料,经过脂肪族二酸二乙酯得到脂肪族二酸二酰肼.脂肪族二酸二酰肼与去氧枞酸酰氯在相转移催化下反应得到N,N＇-二去氢枞酰基取代脂肪族二酸二酰肼,再脱水环合,得到5个标题化合物脂肪族二酸二烷基双去氢枞基双噁二唑.通过元素分析,IR,MS,1H NMR和13C NMR对所合成的新化合物进行了结构表征.初步的除草活性测试表明,化合物6b～6e在100 μg/mL浓度下对油菜的胚根生长具有良好的抑制作用,抑制率均超过80％.     

2-取代氨基-5-去氢枞基-1,3,4-噁二唑衍生物的合成及除草活性

以去氢枞酸为原料,经酰化后与水合肼反应合成去氢枞酰肼3,再与芳基异硫氰酸酯反应,得到中间体1-去氢枞酰基-4-取代基氨基硫脲4,4在Hg(OAc)2/EtOH条件下关环,合成得到一系列新型2-取代氨基-5-去氢枞基-1,3,4-噁二唑化合物5.采用IR,MS,1HNMR,13C NMR和元素分析等方法对中间体4和目标产物5进行了分析和表征.初步的除草活性测试表明,化合物4和5对油菜的胚根生长以及对稗草的幼苗生长有一定的抑制作用,其中化合物4d在浓度为100mg/L时对油菜胚根生长的抑制率达88.2％.     

苯乙酮类去氢枞酰腙的合成

以去氢枞酸为原料,经三氯化磷酰氯化得到去氢枞酰氯(2);2与85%水合肼反应合成了去氢枞酰肼(3);3再分别与苯乙酮及其衍生物发生缩合反应得到4个新型的苯乙酮类去氢枞酰腙化合物,其结构经UV,1H NMR和IR表征.     

新型杀菌农药去氢枞酸铜乳油有效成分分析

本文选用高效液相色谱法测定去氢枞酸的含量，从而可以推算去氢枞酸铜的含量。此分析方法的回收率为98％～101％，变异系数为2．96％。     

新型去氢枞酸基磺酰胺类化合物的合成及其生物活性

去氢枞酸与SOCl2反应制得去氢枞酸酰氯(2);芳磺酰氯与乙二胺经N-酰化反应制得N-芳磺酰基乙二胺(4a~4k);在DMAP催化下,2分别与4a~4k经N-酰化反应合成了11个新型的去氢枞酸基磺酰胺类化合物(5a~5k),其结构经1H NMR,13C NMR,IR和ESI-MS表征。生物活性测试结果表明,在用药量为50μg·mL-1时,5a~5k对黄瓜枯萎病菌、苹果轮纹病菌、番茄早疫病菌、花生褐斑病菌和小麦赤霉病菌有一定的抑菌活性,其中去氢枞酸基间甲基苯磺酰胺(5c)对番茄早疫病菌的杀菌活性最佳,抑制率为73.6%;在用药量为100μg·mL-1时,大部分化合物对油菜的胚根生长有一定抑制作用,其中去氢枞酸基对甲氧基苯磺酰胺(5d)的抑菌活性最佳,抑菌率为57.1%。     

2-取代酰氨基-5-去氢枞基-1,3,4-噻二唑衍生物的合成及杀菌活性

为了寻找具有更高生物活性的新颖先导化合物,本文以去氢枞酸为原料,设计并合成了11个具有1,3,4-噻二唑骨架的新型去氢枞酸衍生物,通过1H NMR、13C NMR、IR、EI-MS和元素分析确认了目标产物的结构。初步的生物活性测试结果表明,大部分化合物具有一定的杀菌活性,其中,化合物2在浓度为50mg/L时对番茄早疫病菌的抑制率达88.9%。     

硫化氢供体型去氢枞酸衍生物的合成及其细胞毒性

以去氢枞酸为原料,通过不同的长度碳链与硫化氢供体4-羟基硫代苯甲酰胺偶联,合成了5个新型硫化氢供体型去氢枞酸衍生物,所得化合物结构经¹H NMR、 ¹³C NMR和HR-MS表征。以阿霉素为阳性对照药,采用MTT法测定目标化合物对HepG2、 MGC803、 T24、 A549和LO2的细胞抑制作用。结果表明：大部分化合物对4种肿瘤细胞株的抑制活性优于母体化合物去氢枞酸,其中化合物4c对HepG2、 T24和A549细胞株的IC50值分别为4.63±0.18、 6.06±0.49和5.79±0.14 μmol·L^-1,优于或接近阳性对照药阿霉素（5.44±0.87、 3.69±0.78和3.75±0.11μmol·L^-1）。     

两亲性纤维素接枝聚脱氢枞酸共聚物的制备及性能研究

通过均相原子转移自由基聚合法(ATRP)将生物质基疏水性松香单体(脱氢枞酸(2-甲基丙烯酰氧基乙基)酯,MAEDA)接枝到纤维素骨架上合成了全生物质基两亲性的纤维素-g-聚脱氢枞酸接枝共聚物(cellulose-g-PMAEDA).ATRP反应过程动力学研究表明cellulose-g-PMAEDA接枝共聚物的合成过程是活性可控的;傅里叶红外光谱(FTIR)、核磁共振氢谱(1H-NMR)、凝胶色谱(GPC)和X射线衍射(XRD)结果证实了cellulose-g-PMAEDA接枝共聚物的成功合成;由于聚脱氢枞酸侧链的引入,cellulose-g-PMAEDA接枝共聚物的热稳定性,疏水性能明显提高,并且具有紫外吸收性能;动态光散射仪和透射电镜结果表明两亲性cellulose-g-PMAEDA接枝共聚物能够在水溶液中自组装成平均粒径约为200 nm左右的纳米微球,并且该纳米微球具有以纤维素为壳,聚脱氢枞酸酯为核的核壳结构.     

Synthesis of Dehydroabietic Acid (2-Acryloyloxy) Ethyl Ester in Ionic Liquids

A simple ionic liquid methodology for the synthesis of a novel derivative of dehydroabietic acid is described. 1-Butyl-3-methylimidazolium tetrafluoroborate [bmim]BF₄, a typical ionic liquid, was used as an efficient and environmentally benign solvent in the synthesis of dehydroabietic acid (2-acryloloxy) ethyl ester by O-acylation reaction of dehydroabietic acid chloride with 2-hydroxyethyl acrylate. This new method showed the advantages of mild reaction conditions, short reaction times, good yields, and recyclable solvent.     

Polymers from the vinyl ester of dehydroabietic acid

The vinyl ester of dehydrogenated abietic acid has been homopolymerized, copolymerized with vinyl chloride, vinyl acetate, and butadiene and terpolymerized with styrene and acrylonitrile. Both in the homopolymerization and the copolymerization, the vinyl ester of dehydroabietic acid has given lower molecular weight polymers than were obtained with the vinyl ester of tetrahydroabietic acid. Polymers containing the vinyl ester of dehydroabietic acid can be readily crosslinked with peroxide.     

褐煤树脂中游离酸的化学组成与结构特征

对云南潦浒、寻甸、吉林舒兰褐煤树脂中游离酸的化学组成及结构特征进行了对比研究。结果显示,潦浒和寻甸游离树脂酸主要是由云 氢松香酸组成,其它三环二萜酸,如松脂酸、三达松脂酸、氢化松香酸、松香酸以及五环三萜酸均有分布,但含量低。正构烷酸Ｃ１２￣Ｃ２８也存在着分布,且集中在Ｃ１６、Ｃ１８和Ｃ２０上,低碳数支链烷酸也被检出。因此,去氢松香酸是潦浒寻甸游离树脂酸的特征代表物,与此相反,舒半游离树脂酸则主要     

Preparation and polymerization of a diisocyanate from the Diels-Alder adduct of levopimaric acid and acrylic acid

Starting from tetrahydroabietic acid the model compounds tetrahydroabietoyl chloride, 2-aminoethyltetrahydroabietate hydrochloride, and 2-isocyanatoethyltetrahydroabietate have been prepared. Carbamate and urea derivatives of the isocyanate have been prepared. A Diels-Alder adduct of levopimaric acid and acrylic acid has been prepared and converted to its diacid chloride. The β-aminoethyl ester hydrochloride has been synthesized and converted to a diisocyanate which has been polymerized with poly(tetramethylene glycol) and also with p-phenylenediamine. Dimerex resin, a technical polymerized rosin, has been similarly converted to a diisocyanate. This isocyanate has not proven to be useful as a polymer-forming intermediate.     

Synthesis and Properties of Hydrophilic Copolymers Containing 5-Fluorouracil,Thymine, or Adenine

Hydrophilic copolymers containing 5-fluorouracil (5-FU), thymine, or adenine were prepared by the free-radical copolymerization of methacryloyl-type monomers containing them with water-soluble vinyl monomers such as acrylic acid, methacrylic acid, vinylpyrroli-done, acrylamide, and 4(5)-vinylimidazole with AIBN as initiator. Complex formation between the copolymers and RNA and between the copolymers having complementary nucleic acid bases in aqueous solution and a DMSO-ethylene glycol was studied by means of UV spectroscopy. These copolymers were found to release the N-hydroxyethyl derivatives of 5-FU, thymine, or adenine by hydrolysis of the ester of the polymer side chain under mild conditions. The effects of the kind of water-soluble comonomer, temperature, pH, and the imidazole group as catalyst on the hydrolysis of the ester are discussed.     

以马来松香丙烯酸乙二醇酯为交联剂的咖啡因分子印迹电化学传感器

以咖啡因为模板分子, 含菲环骨架的马来松香丙烯酸乙二醇酯为交联剂, 甲基丙烯酸为功能单体, 在玻碳电极表面以自由基热聚合的方式制备分子印迹聚合物敏感膜, 构建了测定咖啡因的新型分子印迹膜电化学传感器. 通过循环伏安法、 差分脉冲伏安法及电化学交流阻抗法研究了传感器对咖啡因的响应特性. 结果表明, 在最佳的实验条件下, 传感器的峰电流与咖啡因浓度在3.00×10^-3~2.73 mmol/L范围内呈现良好的线性关系, 检出限(S/N=3)为1.12×10^-4 mmol/L. 传感器具有良好的选择性和重现性. 将该传感器用于可口可乐饮料中咖啡因含量的测定, 平均回收率为98.7%.     

Synthesis of Di- and Triterpenoid Ferrocenyltriazoles

Ferrocene conjugates with a lupane triterpenoid linked through a triazole ring and C₃ or C₆ hydrocarbon tether were synthesized by reaction of ferrocenylalkylazides with betulonic acid propargyl ester. Analogous conjugates were obtained from dehydroabietic acid propargyl ester.     

Simple and Efficient Synthesis of Belinostat

A novel synthesis of belinostat (1) starting from 3-nitrobenzaldehyde has been developed. The key step in this sequence involves the conversion of (2E)-3-(3-aminophenyl)acrylic acid methyl ester to (2E)-3-(3-chlorosulfonylphenyl)acrylic acid methyl ester via diazotization and sulfonylation.     

Daidzein-imprinted membranes using co-functional monomers

Daidzein-imprinted poly(methacrylamide-co-acrylic acid) composite membranes with different ratios of methacrylamide (MAM) versus acrylic acid (AA) were prepared via UV initiated photo-copolymerization on the commercial filter paper with ethylene glycol dimethacrylate (EGDMA) as cross-linker and mixed cellulose ester as agglutinant. Infra-red (IR) spectroscopy and scanning electron microscope (SEM) were used to visualize the surface of the membranes. Binding and recognising properties of the imprinted composite membranes to daidzein and its analogues genistein were evaluated by static adsorption experiment. It was found that the daidzein-imprinted membranes showed high selectivity to daidzein, with the highest selectivity when the composite membrane with the ratio of MAM vs AA as 4:1. The results suggested that the molecularly imprinted composite membranes were potentially useful for daidzein enrichment.     

磷酸酯改性丙烯酸酯复合乳液的制备及其耐腐蚀性能研究

本实验采用乙二醇甲基丙烯酸酯磷酸酯(HEMAP)作为共聚功能单体,与交联功能单体N-(异丁氧基)甲基丙烯酰胺、丙烯酸、甲基丙烯酸甲酯等在可聚合型表面活性剂作用下通过乳液聚合法合成了磷酸酯改性丙烯酸酯乳液体系。通过粒径分析仪、红外光谱仪、热失重分析仪、电化学工作站、耐盐雾试验机等重点探讨不同含量HEMAP对乳液及涂层的粒径、结构、耐热性及耐腐蚀性的影响。结果表明,当磷酸酯功能单体的用量从0.5%增加到2%时,乳液粒径从883.7nm减小到427.9nm,PDI较低,且胶膜热失重速率变缓。加入HEMAP单体后涂层的腐蚀电位升高,腐蚀电流变小,阻抗值升高,金属基材的耐腐蚀性能变好。