Synthesis of o-Carboranyl Containing Esters of Pentavalent Phosphorus Acids

Abstract

A new method for the synthesis of o-carboranyl containing phosphoric, phosphonic and phosphinic acid esters, where the o-carboranil group is in the ester group, has been developed. The propargyl esters of these acids were prapared in two ways: by the reaction of phosphorus acid salts with propargyl chlorid and by interaction of propargyl alcohol with acid chlorides in the presence of Et₃N. The propargyl esters have been converted into carboranyl containing compounds upon treatment with decaborane and dimethyl aniline     

Design and Synthesis of New Bile AcidSterol Conjugates Linked via 1,2,3‐Triazole Ring

A new steroid conjugates have been obtained from bile acids and sterol derivatives using ‘click chemistry’. Intermolecular 1,3‐dipolar cycloaddition of the propargyl ester of bile acids (lithocholic, deoxycholic, and cholic acid) and azide derivatives of sterols (ergosterol and cholesterol) gave a new bile acid? sterol conjugates linked with a 1,2,3‐triazole ring. The structures of all products were confirmed by spectroscopic (¹H‐ and ¹³C‐NMR, and FT‐IR) analyses, mass spectrometry (ESI‐MS), and in silico biological activity evaluation methods (PASS), as well as PM5 semiempirical methods.     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.     

Cyclisation versus 1,1‐Carboboration: Reactions of B(C6F5)3 with Propargyl Amides

A series of propargyl amides were prepared and their reactions with the Lewis acidic compound B(C₆F₅)₃ were investigated. These reactions were shown to afford novel heterocycles under mild conditions. The reaction of a variety of N‐substituted propargyl amides with B(C₆F₅)₃ led to an intramolecular oxo‐boration cyclisation reaction, which afforded the 5‐alkylidene‐4,5‐dihydrooxazolium borate species. Secondary propargyl amides gave oxazoles in B(C₆F₅)₃ mediated (catalytic) cyclisation reactions. In the special case of disubstitution adjacent to the nitrogen atom, 1,1‐carboboration is favoured as a result of the increased steric hindrance (1,3‐allylic strain) in the 5‐alkylidene‐4,5‐dihydrooxazolium borate species.     

Synthesis and carbene decomposition of functionally substituted diazoacetate esters. 6. Propargyl diazoacetate

A synthesis of propargyl diazoacetate (I) was carried out and its chemical transformations were studied. The reaction of (I) in the presence of Rh(OAc)₂ at 25C with 1-pentyne gives the propargyl ester of l-propylcyclopropene-3-carboxylic acid in 80% yield, while reaction with 2,3-dimethyl-2-butene at 60C results in the propargyl ester of tetramethylcyclopropanecarboxylic acid in 10% yield. Compound (I) reacts under the same conditions (35–60C) with ether, CH₂Cl₂ and water, with the formation of propargyl esters of ethoxyacetic, 2,3-dichloropropionic, and a mixture of glycols and 2-[(propyn-2-yl)-oxycarbonyl]methoxy acetic acids in yields of up to 35%. A spontaneous oligomerization of (I) was observed as a result of a dipolar [1, 3]-cycloaddition of the CH=N₂ fragment of one molecule of (I) to the terminal triple bond of the second molecule with the formation of oligomers of 3-hydroxymethylpyrazole-5-carboxylic acid.For previous communication, see [1].Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 5, pp. 1051–1056, May, 1991.     

Fused-ring and linking group effects of proton donors and acceptors on simple H-bonded liquid crystals

Two fused-ring structures, 6-decyloxy-2-naphthoic acid C₁₀ONA (3) and 6-dodecyloxyisoquinoline IS (8), were synthesized and utilized as proton donor and acceptor moieties to construct a series of simple mesogenic supramolecules. The other complementary hydrogen-bonded (H-bonded) moieties are benzoic acids, thiophenecarboxylic acid and pyridines containing different alkyl chain lengths connected by ether and ester linkages, i.e. 4-alkoxybenzoic acid C _n OBA (1), terephthalic acid monoalkyl ester C _n COOBA (2), 2,5-thiophenedicarboxylic acid monodecyl ester C₁₀COOTHA (4), 4-alkoxypyridine C _n OP (6) and isonicotinic acid alkyl ester C _n COOP (7). Several series of simple mesogenic supramolecular dimers were constructed from 1:1 molar ratios of proton donors (C _n OBA, C _n COOBA, C₁₀ONA and C₁₀COOTHA) and proton acceptors (IS, C _n OP and C _n COOP), though the proton acceptor C _n COOP induced phase separation in all complexes. In order to investigate their fused-ring and linking group effects on the mesogenic properties of the H-bonded complexes, analogous simple supramolecular structures are compared. Supramolecular architecture and the distinct mesomorphism of these simple H-bonded liquid crystalline materials were confirmed by polarizing optical microscopy, DSC and powder X-ray diffraction experiments.     

Phase and miscibility behavior of binary lipid systems

Differential scanning calorimetry was applied to study the phase diagrams of the following binary lipid systems: myristic acid (C₁₃COOH) / pentadecanoic acid (C₁₄COOH); palmitic acid methyl ester (C₁₅COOMe) / heptadecanoic acid methyl ester (C₁₆COOMe); palmitic acid methyl ester (C₁₅COOMe) / stearic acid methyl ester (C₁₇COOMe); palmitic acid methyl ester (C₁₅COOMe) / arachidic acid methyl ester (C₁₉COOMe). A distinct succession in the phase diagram types and phase regions was observed, according to the chemical structure of the mixing components.In the systems C₁₃COOH/C₁₄COOH; C₁₅COOMe/C₁₆COOMe and C₁₆COOMe/ C₁₇COOMe, both components are completely miscible in the low- and high-temperature phase. Contrasting with these three binary lipid systems, the system C₁₅COOMe/ C₁₄COOMe shows complete miscibility only in the high-temperature phase, but almost complete demixing in the solid state. In the phase diagram an incongruent melting 11 complex is built up. This complex forms an eutectic mixture with the phase of C₁₅COOMe and a peritectic system with C₁₉COOMe.     

Kinetics and products of propargyl (C3H3) radical self‐reactions and propargyl‐methyl cross‐combination reactions

Propargyl (HCC CH₂) and methyl radicals were produced through the 193‐nm excimer laser photolysis of mixtures of C₃H₃Cl/He and CH₃N₂CH₃/He, respectively. Gas chromatographic and mass spectrometric (GC/MS) product analyses were employed to characterize and quantify the major reaction products. The rate constants for propargyl radical self‐reactions and propargyl‐methyl cross‐combination reactions were determined through kinetic modeling and comparative rate determination methods. The major products of the propargyl radical combination reaction, at room temperature and total pressure of about 6.7 kPa (50 Torr) consisted of three C₆H₆ isomers with 1,5‐hexadiyne(CHC CH₂ CH₂ CCH, about 60%); 1,2‐hexadiene‐5yne (CH₂CC CH₂ CCH, about 25%); and a third isomer of C₆H₆ (∼15%), which has not yet been, with certainty, identified as being the major products. The rate constant determination in the propargyl‐methyl mixed radical system yielded a value of (4.0 ± 0.4) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹ for propargyl radical combination reactions and a rate constant of (1.5 ± 0.3) × 10⁻¹⁰ cm³ molecule⁻¹ s⁻¹ for propargyl‐methyl cross‐combination reactions. The products of the methyl‐propargyl cross‐combination reactions were two isomers of C₄H₆, 1‐butyne (about 60%) and 1,2‐butadiene (about 40%). © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 118–124, 2000     

A Photoinduced,Nickel-Catalyzed Reaction for the Stereoselective Assembly of C-Linked Glycosides and Glycopeptides

C-Alkyl glycosides and glycoproteins exist in natural products and are prized for their role as carbohydrate mimics in drug design. However, a practical strategy that merges glycosyl donors with readily accessible reagents, derived from abundant carboxylic acid and amine feedstocks, is yet to be conceived. Herein, we show that a nickel catalyst promotes C−C coupling between glycosyl halides and aliphatic acids or primary amines (converted into redox-active electrophiles in one step), in the presence of Hantzsch ester and LiI (or Et₃N) under blue LED illumination to deliver C-alkyl glycosides with high diastereoselectivity. Mechanistic studies support the photoinduced formation of alkyl radicals that react with a glycosyl nickel species generated in situ to facilitate cross-coupling. Through this manifold, innate CO₂H and NH₂ motifs embedded within amino acids and oligopeptides are selectively capped and functionalized to afford glycopeptide conjugates through late-stage glycosylation.     

Water‐soluble metalated and non‐metalated A2B‐ and A3‐corrole/amino acid conjugates: syntheses,characterization and properties

In this study, novel water‐soluble corrole amino acid conjugates were synthesized and characterized. The coupling reaction of A₂B‐ and A₃‐corroles with glycine ethyl ester and taurine under strong basic conditions proved to be successful and yielded di‐ and trifunctionalized corrole amino acid conjugates in good yields. The subsequent metalation of the corrole/amino acid conjugates broadens the scope for applications considerably. As examples, we herein show the catalytic activity of the Mn(III) A₃‐corrole towards O₂ evolution. First we employed tert‐butyl hydroperoxide (t‐BuOOH) as oxidant to obtain the Mn(V)oxo species and tetrabutyl ammonium hydroxide (TBAH) as hydroxide donor agent. Furthermore, the binding properties of the non‐metalated and the Mn(III) A₃‐corrole/amino sulfonic acid conjugates and transport of proteins were investigated and the conjugates exhibited binding to human serum albumin (HSA). Finally, a novel Ga(III) A₃‐corrole/amino sulfonic acid derivative was synthesized and we briefly describe the photophysical properties of this compound. Copyright © 2013 John Wiley & Sons, Ltd.     

Acylaminoacetyl derivatives of active methylene compounds. 1. The cyclization of the benzoylaminoacetyl derivatives to α-substituted tetramic acids

Hippuric acid was converted to α-Y-substituted tetramic acids (Y = -CN, -CO₂R and -COCH₃) according to the following general scheme of reactions: a) preparation of the hippuric acid chloride or of its p-nitrophenyl ester; b) C-acylation of an active methylene compound Y-CH₂-CO₂R using the acid chloride or the active ester; and c) intramolecular condensation of the C-acylation compound to an α-Y-substituted tetramic acid. The conditions of the C-acylation reaction and the structure and reactivity of the benzoylaminoacetyl derivatives were investigated.     

Reactions of a Ruthenium Complex with Substituted N‐Propargyl Pyrroles

In an investigation into the chemical reactions of N‐propargyl pyrroles 1 a – c , containing aldehyde, keto, and ester groups on the pyrrole ring, with [Ru]?Cl ([Ru]=Cp(PPh₃)₂Ru; Cp=C₅H₅), an aldehyde group in the pyrrole ring is found to play a crucial role in stimulating the cyclization reaction. The reaction of 1 a , containing an aldehyde group, with [Ru]?Cl in the presence of NH₄PF₆ yields the vinylidene complex 2 a , which further reacts with allyl amine to give the carbene complex 6 a with a pyrrolizine group. However, if 1 a is first reacted with allyl amine to yield the iminenyne 8 a , then the reaction of 8 a with [Ru]?Cl in the presence of NH₄PF₆ yields the ruthenium complex 9 a , containing a cationic pyrrolopyrazinium group, which has been fully characterized by XRD analysis. These results can be adequately explained by coordination of the triple bond of the propargyl group to the ruthenium metal center first, followed by two processes, that is, formation of a vinylidene intermediate or direct nucleophilic attack. Additionally, the deprotonation of 2 a by R₄NOH yields the neutral acetylide complex 3 a . In the presence of NH₄PF₆, the attempted alkylation of 3 a resulted in the formation the Fischer‐type amino–carbene complex 5 a as a result of the presence of NH₃, which served as a nucleophile. With KPF₆, the alkylation of 3 a with ethyl and benzyl bromoacetates afforded the disubstituted vinylidene complexes 10 a and 11 a , containing ester groups, which underwent deprotonation reactions to give the furyl complexes 12 a and 13 a , respectively. For 13 a , containing an O‐benzyl group, subsequent 1,3‐migration of the benzyl group was observed to yield product 14 a with a lactone unit. Similar reactivity was not observed for the corresponding N‐propargyl pyrroles 1 b and 1 c , which contained keto and ester groups, respectively, on the pyrrole ring.     

甾体磷酰胺类缀合物在电喷雾质谱中的裂解特征

Novel steroidal phosphoramidate conjugates of 3'-azido-2',3'-dideoxythymidine(AZT)and amino acid esterswere synthesized and determined by positive and negative ion electrospray ionization mass spectrometry.The MSfragmentation behaviors of the steroidal phosphoramidate conjugates have been investigated in conjunction withtandem mass spectrometry of ESI-MS/MS.There were three characteristic fragment ions in the positive ion ESImass spectra,which were the Na adduct ions with loss of steroidal moiety,amino acid ester moiety from pseudomolecular ion(M Na)~ ,and the phosphoamino acid methyl ester Na adduct ion by α-cleavage of the phosphora-midate respectively.The main fragment ions in negative ion ESI mass spectra were the ion(M-HN_3)~-,the ion(M-AZT-H)~-,and the ion(M-steroidal moiety-H)~- besides the pseudo molecular ion(M-H)~-.Thefragmentation patterns did not depend on the attached amino acid ester moiety.     

Enantio-controlled synthesis of the crocyclic C14-C23 subunit of cytochalasin b

The synthesis of the C₁₄-C₂₃ macrocyclic subunit of cytochalasin B from pulegone is described. The key feature of this synthesis is the photo-induced rearrangement of epoxy diazomethyl ketone E to a γ-hydroxy alkenoic ester (Scheme 2). The intermediate epoxy alcohol F was prepared using the asymmetric Sharpless epoxidation. Considerable attention was given to the preparation of allylic alcohol 14, having a t-butyldimethylsilyloxy protecting function, as starting material for the asymmetric epoxidation, however, several unforeseen difficulties were encountered (Schemes 3 and 4). Satisfactory results were obtained using the methoxy group as protecting function (Scheme 5). The allylic alcohol 22 was prepared from bromide 20 by chain lengthening with propargyl alcohol. The Sharpless epoxidation of 22 took place with high induction. Conversion to epoxy ester 24, to diazo ketone 25 and photo-rearrangement to 26 and deprotection to give 28, completes the sequence.     

Über Chalkogenolate. 81. Untersuchungen über N-Hydroxydithiocarbamidsäure 3. Ester der N-Hydroxydithiocarbimidsäure und -carbamidsäure

On Chalcogenolates. 81. Studies on N-Hydroxy Dithiocarbamic Acid. 3- Esters of N-Hydroxy Dithiocarbimic Acid and Dithiocarbamic Acid The reaction between hydroxylamine, carbon disulfide, and alkyl halide leads to the corresponding ester of N-hydroxy dithiocarbimic acid HO? N?C(SR)₂ with R = CH₃, C₂H₅; R₂ = ? CH₂? CH₂? . The phenyl ester of N-hydroxy dithiocarbamic acid HO? NH? CS(SC₆H₅) has been prepared by reaction of hydroxylammonium chloride with the phenyl ester of chlorodithioformic acid. N-Methyl hydroxylammonium chloride reacts with carbon disulfide and alkyl iodide to form the corresponding ester of the dithiocarbamic acid HO? N(CH₃)? CS(SR) with R = CH₃, C₂H₅. The unstable compounds have been characterized by different methods.     

Borohydrides from Organic Hydrides: Reactions of Hantzsch’s Esters with B(C6F5)3

We report herein that the reaction between a series of Hantzsch’s ester analogues 1 a – d with the Lewis acidic species B(C₆F₅)₃ results in facile transfer of hydride to boron. The main products of this reaction are pyridinium borohydride salts 2 a – d , which are obtained in high to moderate yields. The N‐substituted substrates (N‐Me, N‐Ph) reacted in high yield 90–98 % and the connectivity of the products were confirmed by an X‐ray crystallographic analysis of the N‐Me borohydride salt 2 a . Unsubstituted Hanztsch’s ester 1 a reacted less effectively generating only 60 % of the corresponding borohydride salt, with the balance of the material sequestered as the ester‐bound Lewis acid–base adduct 3 a . Formation of the Lewis acid–base adduct could be minimized by increasing the steric bulk about the ester groups as in 1 d . The connectivity of the carbonyl‐bound adduct was confirmed by an X‐ray crystallographic analysis of 3 e the product of the reaction of methyl ketone 1 e with B(C₆F₅)₃. We also explored the generation of these pyridinium salts by employing frustrated Lewis pair methodology. However, the reaction of mixtures of the corresponding pyridine and B(C₆F₅)₃ with hydrogen gas only resulted in formation of trace amounts of the pyridinium borohydride, along with the Lewis acid–base adduct of the starting material and B(C₆F₅)₃. The 1,2‐dihydropyridine adduct was the final product of this reaction. This was ascribed to the low basicity of the pyridine nitrogen and the complicating formation of an ester bound Lewis acid–base adduct.     

Synthesis of a C3-symmetric macrocycle with alternating sugar amino acid and tyrosine residues

A C₃-symmetric macrocycle with alternating sugar amino acid and tyrosine residues was synthesized in seven steps from tyrosine tert-butyl ester and a sugar amino acid precursor derived from D-glucosamine. An Fmoc-protected D-glucosamine derivative was oxidized at C-6 to give the sugar amino acid, which was immediately coupled to tyrosine tert-butyl ester to produce an orthogonally protected building block. This building block was subsequently elongated to the trimer via the dimer, and finally cyclized to give the C₃-symmetric macrocycle.     

Methyl 2,6‐dicarboxybenzoate

Regioselective methyl­ation of hemimellitic acid in basic MeOH yields the title 2‐methyl ester, C₁₀H₈O₆, of the parent acid. The asymmetric unit contains one complete mol­ecule, which packs with the methyl ester groups lying between zigzag chains produced by hydrogen bonding, utilizing the head‐to‐tail carboxylic acid–acid dimer motif.     

Hydrophobic Vitamin B12. X. Steric Effect in Electrochemical Carbon-Skeleton Rearrangement Catalyzed by Hydrophobic Vitamin B12 in Nonaqueous Media

Abstract

A steric effect in the carbon-skeleton rearrangement catalyzed by heptamethyl cobyrinate perchlorate, [Cob(II)7C₁ester]C10₄, was investigated under electrochemical conditions. The controlled-potential electrolyses of alkyl halides having two carboxylic ester groups of different bulkiness on the same carbon atom, such as 2,2-bis(ethoxycarbonyl)-l-bromopropane, l-bromo-2-tert-butoxycarbonyl-2-ethoxy-carbonylpropane, l-bromo-2-cyclohexyloxycarbonyl-2-ethoxycarbonylpropane, and l-bromo-2-ethoxy-carbonyl-2-phenoxycarbonylpropane, were carried out in N,N-dimethylformamide, as catalyzed by [Cob(II)7C₁ester]CIO₄, to give the corresponding ester-migrated products in the dark at—1.5 V vs SCE in the presence of acetic acid and at—2.0 V vs SCE without acetic acid. As regards a correlation between bulkiness of an ester group and a migration aptitude, a smaller ester group tends to migrate to the adjacent carbon atom more readily than a larger one. The origin of such a steric effect is discussed with attention to the rate-determining step.     

Simultaneous gas chromatographic determination of aliphatic C2−C20 n-carboxylic acids and their methyl esters using SE-30 and OV-351 quartz capillary columns

Summary Simultaneous determination of aliphatic C₂–C₂₀ carboxylic acids and their methyl esters was carried out using SE-30 and OV-351 quartz capillary columns with temperature programming. Complete resolution of all 36 components was achieved. On SE-30 the methyl ester and the corresponding free acid are eluted in turn, whereas on OV-351 acetic acid eluted after methyl octanoate, after which the C_n methyl ester and C_n-6 carboxylic acid (n>9) are eluted one after the other. A non-polar SE-30 column is better for long-chain acids giving sharp peaks without tailing, the analysis time of the mixture being less than 16 minutes. The weight response correction factors for compounds under optimum operating conditions are given.