铜(Ⅰ)催化的常压二氧化碳、炔丙醇和仲胺三组分反应

氨基甲酸酯类化合物是一类重要的有机化合物,在医药、农药以及有机合成中有着广泛应用,也可以作为氨基的保护基团.炔丙醇、仲胺和CO_2在铜(Ⅰ)催化下能够发生三组分"一锅"反应,高收率、高选择性地生成β-羰基氨基甲酸酯.该反应能够在常压CO_2的条件下进行,具有反应条件温和、原子经济性高和底物适应范围宽等优点.通过控制氧气含量,可以高选择性地形成β-羰基氨基甲酸酯.多种炔丙醇和仲胺均能高效反应,生成相应的β-羰基氨基甲酸酯.该方法避免了利用高压CO_2提高反应效率的问题,是二氧化碳低压温和条件下制备β-羰基氨基甲酸酯类化合物的简便途径.     

Ag(Ⅰ)/(~nC_7H_(15))_4NBr催化氨基甲酸盐和炔丙醇反应:二氧化碳定量转化制备β-羰基氨基甲酸酯

将一种简单的双组分催化体系即Ag(Ⅰ)/(~nC_7H_(15))_4NBr应用于常压下催化氨基甲酸盐和炔丙醇双组分反应制备β-羰基氨基甲酸酯。该方法具有简便、高效的优点,并且不需要使用配体,可以将一系列的炔丙醇和仲胺底物转化为相应的氨基甲酸酯产物。该方法通过CO_2的定量催化转化,提高了CO2的利用效率。     

离子液体促进Ru/C催化有机胺与CO_2/H_2氮甲酰化反应研究

以CO_2为甲酰化试剂和H_2为还原剂进行有机胺N-甲酰化反应是合成甲酰胺的一条绿色反应路径,具有重要意义.本工作针对有机胺与CO_2/H_2的N-甲酰化反应,构建了以1-丁基-3-甲基咪唑乙酸盐([Bmim][OAc])离子液体为溶剂、Ru/C为催化剂的非均相催化体系,在相对温和条件下(100℃、8 MPa)实现了有机伯胺、仲胺和芳香胺的N-甲酰化反应,获得了一系列甲酰胺.研究表明,[Bmim][OAc]通过与氨基形成氢键活化有机胺,并可通过调控Ru纳米粒子的电子状态,增强Ru纳米粒子对H_2的活化能力,进而实现催化N-甲酰化反应.     

Ag(I)/(nC7H15)4NBr催化氨基甲酸盐和炔丙醇反应:二氧化碳定量转化制备β-羰基氨基甲酸酯

将一种简单的双组分催化体系即Ag（I）/（ⁿC₇H₁₅）₄NBr应用于常压下催化氨基甲酸盐和炔丙醇双组分反应制备β-羰基氨基甲酸酯。该方法具有简便、高效的优点,并且不需要使用配体,可以将一系列的炔丙醇和仲胺底物转化为相应的氨基甲酸酯产物。该方法通过CO₂的定量催化转化,提高了CO₂的利用效率。     

CO_2化工:离子微环境调控的CO_2绿色高效转化

二氧化碳(CO_2)是典型的温室气体,又是重要的可再生碳资源,实现CO_2的资源化利用是国际前沿和研究热点.结合本课题组的工作,本文总结和评述了离子液体特殊微观结构及离子微环境构筑、离子液体与CO_2间的相互作用机制、离子液体强化CO_2催化合成碳酸酯、CO_2电化学还原、CO_2生物催化还原方面的研究进展,并展望了未来发展方向.     

铜催化炔丙醇酯与β-羰基膦酸酯的不对称[3+2]环加成反应合成手性膦酰化2,3-二氢呋喃

手性2,3-二氢呋喃衍生物是一类重要的杂环化合物,广泛存在于天然产物和生物活性分子中.它们也经常被用于手性四氢呋喃化合物的不对称合成.因此,人们发展了很多合成手性2,3-二氢呋喃化合物的方法,如有机小分子催化的多米诺迈克尔-烷基化反应、“中断的”Feist-Bénary反应或改进的 Feist-Bénary反应.此外,过渡金属催化的手性2,3-二氢呋喃的不对称合成在近些年引起了人们的极大关注. Ozawa等通过 Pd-催化2,3-二氢呋喃的动力拆分方法获得了手性2-芳基-2,3-二氢呋喃. Evans发展了一种 Sc-催化联烯硅和乙醛酸乙酯的[3+2]环加成反应合成手性2,3-二氢呋喃的方法.最近, Fu和 Tang等发展了 Cu催化烯酮和重氮化合物的[4+1]环加成反应合成手性2,3-二氢呋喃的方法.在 Nishibayashi和 van Maarseveen的开创性工作之后, Cu催化的不对称炔丙基转化反应取得了很大的进展.最近,我们发展了一类新的三齿手性 P,N,N-配体,在 Cu催化不对称炔丙基取代、脱羧炔丙基取代、[3+2]、[3+3]和[4+2]环加成反应中表现出优秀的对映和非对映选择性.其中,我们发现采用 Cu催化炔丙醇酯和β-酮酯的[3+2]环加成反应,能高对映选择性地获得手性2,3-二氢呋喃.我们设想,采用β-羰基膦酸酯代替β-酮酯,通过这种 Cu催化[3+2]环加成反应,将可以合成一类具有重要生物活性的手性膦酰化2,3-二氢呋喃化合物.基于这种设想,本文使用手性 P,N,N-配体,通过 Cu催化炔丙醇酯与β-羰基膦酸酯的不对称[3+2]环加成反应,以很好的收率和最高92% ee的对映选择性获得了一系列光学活性的膦酰化2,3-二氢呋喃化合物.我们以炔丙醇酯1a与β-羰基膦酸酯2a为标准底物,优化了反应条件,考察了配体、Cu盐、碱和反应温度等对反应收率和对映选择性的影响.我们确定了最佳的反应条件：以4b为配体,以 Cu(OTf)2为铜盐,以t-BuOK为碱,以 MeOH为溶剂,–20oC反应24 h.在此条件下,我们对β-羰基磷酸酯2的适用范围进行了考察.结果表明,各种苯基取代的β-羰膦磷酸酯均能得到很好的收率和对映选择性.苯环上取代基的空间效应对反应的对映选择性影响不大,但对反应收率影响较大,与相应3-取代或4-取代底物相比较,2-取代的底物获得的收率较低.苯环对位取代基的电子效应对反应的影响不大,给电子基或吸电子基的底物,均得到了较好的收率和对映选择性.杂环取代的底物同样适用于该反应,以90%的收率和89% ee的对映选择性获得了相应的[3+2]环加成产物.对于烷基底物,虽然反应的产率略低,但是得到了高达92% ee的产物.此外,我们对炔丙醇酯底物的适用范围也进行了考察.结果表明,该体系对于各种取代的炔丙醇酯底物均可以获得较高的收率和良好的对映选择性.总之,本文发展了一种铜催化炔丙醇酯与β-羰基膦酸酯的不对称[3+2]环加成反应的方法,成功合成了手性膦酰化2,3-二氢呋喃化合物.通过使用一个结构刚性的酮亚胺三齿 P,N,N-配体,以很好的收率和最高92% ee的对映选择性获得了一系列光学活性的膦酰化2,3-二氢呋喃化合物.     

铂催化的炔丙醇酯的重排反应以及三级胺氮原子邻位的C—H官能化反应的研究

对我们研究小组近几年在铂催化炔丙醇酯的重排反应以及三级胺氮原子邻位的C—H官能化反应方面取得的成果进行了阶段小结.重点从反应的设计,反应体系中的添加剂等对反应的影响,讨论了不同底物中炔丙醇酯的重排方式,并对相关反应机理进行了讨论.同时我们首次提出了非氧化条件下铂催化的交叉脱氢偶联(CDC)反应.     

离子液体催化CO_2和环氧化合物的研究进展

离子液体是一类新型的催化CO_2环加成反应的催化剂,因其具有结构可设计性、催化活性高、绿色高效等优点而被广泛应用于催化合成环状碳酸酯.本文主要综述了近几年来各种常规型离子液体及功能化离子液体对CO_2和环氧化合物反应的催化性能的研究进展,其中常规型离子液体主要有咪唑类、季铵盐、季鏻盐、吡啶类等离子液体,而功能化离子液体包括氨基功能化、羟基功能化、羧基功能化、氨基酸类等离子液体.同时对各类离子液体催化CO_2与环氧化合物合成环状碳酸酯的研究中存在的问题进行了分析,并对其应用前景进行了展望.     

无溶剂下胺、炔、炔反应选择性构筑季碳炔丙基胺（英文）

在无溶剂下以胺、炔、炔为原料通过"一锅法"串联的反应方便、高效地合成了季碳炔丙基胺.脂肪炔和芳香炔都可以适用于该反应体系.在脂肪炔反应体系中, AgOTf催化促进胺-炔-炔"马氏"反应进程;当芳香炔作为反应底物时,CuBr_2/Zn(OTf)_2用于共催化剂.该串联反应展示出优异的原子利用效率,为季碳炔丙基胺的制备提供了一种极具有吸引力的绿色合成方法.     

铜催化炔丙醇酯与β-羰基膦酸酯的不对称[3+2]环加成反应合成手性膦酰化2,3-二氢呋喃（英文）

手性2,3-二氢呋喃衍生物是一类重要的杂环化合物,广泛存在于天然产物和生物活性分子中.它们也经常被用于手性四氢呋喃化合物的不对称合成.因此,人们发展了很多合成手性2,3-二氢呋喃化合物的方法,如有机小分子催化的多米诺迈克尔-烷基化反应、"中断的"Feist-Bénary反应或改进的Feist-Bénary反应.此外,过渡金属催化的手性2,3-二氢呋喃的不对称合成在近些年引起了人们的极大关注.Ozawa等通过Pd-催化2,3-二氢呋喃的动力拆分方法获得了手性2-芳基-2,3-二氢呋喃.Evans发展了一种Sc-催化联烯硅和乙醛酸乙酯的[3+2]环加成反应合成手性2,3-二氢呋喃的方法.最近,Fu和Tang等发展了Cu催化烯酮和重氮化合物的[4+1]环加成反应合成手性2,3-二氢呋喃的方法.在Nishibayashi和vanMaarseveen的开创性工作之后,Cu催化的不对称炔丙基转化反应取得了很大的进展.最近,我们发展了一类新的三齿手性P,N,N-配体,在Cu催化不对称炔丙基取代、脱羧炔丙基取代、[3+2]、[3+3]和[4+2]环加成反应中表现出优秀的对映和非对映选择性.其中,我们发现采用Cu催化炔丙醇酯和β-酮酯的[3+2]环加成反应,能高对映选择性地获得手性2,3-二氢呋喃.我们设想,采用β-羰基膦酸酯代替β-酮酯,通过这种Cu催化[3+2]环加成反应,将可以合成一类具有重要生物活性的手性膦酰化2,3-二氢呋喃化合物.基于这种设想,本文使用手性P,N,N-配体,通过Cu催化炔丙醇酯与β-羰基膦酸酯的不对称[3+2]环加成反应,以很好的收率和最高92%ee的对映选择性获得了一系列光学活性的膦酰化2,3-二氢呋喃化合物.我们以炔丙醇酯1a与β-羰基膦酸酯2a为标准底物,优化了反应条件,考察了配体、Cu盐、碱和反应温度等对反应收率和对映选择性的影响.我们确定了最佳的反应条件:以4b为配体,以Cu(OTf)_2为铜盐,以t-BuOK为碱,以MeOH为溶剂,–20oC反应24h.在此条件下,我们对β-羰基磷酸酯2的适用范围进行了考察.结果表明,各种苯基取代的β-羰膦磷酸酯均能得到很好的收率和对映选择性.苯环上取代基的空间效应对反应的对映选择性影响不大,但对反应收率影响较大,与相应3-取代或4-取代底物相比较,2-取代的底物获得的收率较低.苯环对位取代基的电子效应对反应的影响不大,给电子基或吸电子基的底物,均得到了较好的收率和对映选择性.杂环取代的底物同样适用于该反应,以90%的收率和89%ee的对映选择性获得了相应的[3+2]环加成产物.对于烷基底物,虽然反应的产率略低,但是得到了高达92%ee的产物.此外,我们对炔丙醇酯底物的适用范围也进行了考察.结果表明,该体系对于各种取代的炔丙醇酯底物均可以获得较高的收率和良好的对映选择性.总之,本文发展了一种铜催化炔丙醇酯与β-羰基膦酸酯的不对称[3+2]环加成反应的方法,成功合成了手性膦酰化2,3-二氢呋喃化合物.通过使用一个结构刚性的酮亚胺三齿P,N,N-配体,以很好的收率和最高92%ee的对映选择性获得了一系列光学活性的膦酰化2,3-二氢呋喃化合物.     

Intermolecular forces for D2, N2, O2, F2 and CO2

The intermolecular potentials for D₂, N₂, O₂, F₂ and CO₂ are determined on the basis of the second virial coeffincients, the polarizabilities parallel and perpendicular to the molecular axes, and the electric quadrupole moment. The repulsive parts of the potentials are taken from the corresponding Kihara core-potentials. Effects of the octopolar induction are taken into consideration in a unique way. The potential depends on relative orientations of the two molecules as well as the distance r between the molecular centers. This dependence is shown in graphs. A measure of the anisotropy of the potential depth is 0.72 for CO₂ 0.36 for D₂, and smaller than 0.27 for N₂ O₂ and F₂. The remarkable anisotropy for CO₂ and D₂ is due to strong electrostatic quadrupole interactions.     

Ba3 (VO4)2-K2 Ba(MoO4)2 and Pb3 (VO4)2-K2 Pb(MoO4)2 systems

Phase equilibria in the Ba₃(VO₄)₂-K₂Ba(MoO₄)₂ and Pb3(VO₄)₂-K₂Pb(MoO₄)₂ systems have been investigated. In the first system, a continuous series of substitutional solid solutions with the palmierite structure is formed, and in the second one, the polymorphic transition in lead orthovanadate at 100°C restricts the extent of the palmierite-type solid solution to 10–100 mol % K₂Pb(MoO₄)₂. Original Russian Text ? V.D. Zhuravlev, Yu.A. Velikodnyi, A.S. Vinogradova-Zhabrova, A.P. Tyutyunnik, V.G. Zubkov, 2008, published in Zhurnal Neorganicheskoi Khimii, 2008, Vol. 53, No. 10, pp. 1746–1748.     

配合物[Cu(H2O)(C12H8N2)2].2ClO4的合成、性质及晶体结构

合成了配合物[Cu(H2O)(C12H8N2)2]*2ClO4(C12H8N2为1,10-邻菲咯啉),用元素分析、摩尔电导、红外光谱及电子光谱进行了表征,并测定了配合物的晶体结构.该晶体属单斜晶系,空间群为CC;晶胞参数a=1.9177(2)nm,b=0.81994(0)nm,c=1.62458(14)nm,β=100.104(6)°;V=2.5419(4)nm3,Z=4,F(000)=1300,DC=1.693g/cm3,R=0.0430,wR=0.1195.中心铜(Ⅱ)离子与两个1,10-邻菲咯啉的四个N原子和一个水分子的氧原子配位,形成了一个变形的三角双锥结构.     

The preparation of NbH5(Me2PCH2CH2Me2)2 and NbHL2(Me2PCH2CH2PMe2)2 (L = CO or C2H4)

MMe₅(dmpe) (M = Nb or Ta, dmpe = Me₂PCH₂CH₂PMe₂) reacts with H₂ (500 atm) and dmpe in THF at 60°C to give MH₅(dmpe)_2? NbH₅(dmpe)₂ readily reacts with two mol of CO or ethylene (L) to give NbHL₂(dmpe)₂. The exchange of the hydride ligand with the ethylene protons in NbH(C₂H₄)₂(dmpe)₂ is not rapid on the ¹H NMR time scale (60 MHz) at 95°C.     

Zur Trennung von H2, O2, N2, NO, CO, N2O, CO2, C2H6, C2H4, C2H2, NO2(N2O4) und Feuchtigkeit

Ohne Zusammenfassung     

Phase transitions in Ca3(BN2)2 and Sr3(BN2)2

α-Ca₃(BN₂)₂ crystallizes in the cubic system (space group: ) with one type of calcium ions disordered over of equivalent (8c) positions. An ordered low-temperature phase (β-Ca₃(BN₂)₂) was prepared and found to crystallize in the orthorhombic system (space group: Cmca) with lattice parameters: , , and . Structure refinements on the basis of X-ray powder data have revealed that orthorhombic β-Ca₃(BN₂)₂ corresponds to an ordered super-structure of cubic α-Ca₃(BN₂)₂. The space group Cmca assigned for β-Ca₃(BN₂)₂ is derived from by a group-subgroup relationship.DSC measurements and temperature-dependent in situ X-ray powder diffraction studies showed reversible phase transitions between β- and α-Ca₃(BN₂)₂ with transition temperatures between 215 and 240 °C.The structure Sr₃(BN₂)₂ was reported isotypic with α-Ca₃(BN₂)₂ () with one type of strontium ions being disordered over of equivalent (2c) positions. In addition, a primitive () structure has been reported for Sr₃(BN₂)₂. Phase stability studies on Sr₃(BN₂)₂ revealed a phase transition between a primitive and a body-centred lattice around 820 °C. The experiments showed that both previously published structures are correct and can be assigned as α-Sr₃(BN₂)₂ (, high-temperature phase), and β-Sr₃(BN₂)₂ (, low-temperature phase).A comparison of Ca₃(BN₂)₂ and Sr₃(BN₂)₂ phases reveals that the different types of cation disordering present in both of the cubic α-phases () have a directing influence on the formation of two distinct (orthorhombic and cubic) low-temperature phases.     

Conversion of NO in NO/N2, NO/O2/N2, NO/C2H4/N2 and NO/C2H4/O2/N2 Systems by Dielectric Barrier Discharge Plasmas

An experimental study on the conversion of NO in the NO/N₂, NO/O₂/N₂, NO/C₂H₄/N₂ and NO/C₂H₄/O₂/N₂ systems has been carried out using dielectric barrier discharge (DBD) plasmas at atmospheric pressure. In the NO/N₂ system, NO decomposition to N₂ and O₂ is the dominating reaction; NO conversion to NO₂ is less significant. O₂ produced from NO decomposition was detected by an on-line mass spectrometer. With the increase of NO initial concentration, the concentration of O₂ produced decreases at 298 K, but slightly increases at 523 K. In the NO/O₂/N₂ system, NO is mainly oxidized to NO₂, but NO conversion becomes very low at 523 K and over 1.6% of O₂. In the NO/C₂H₄/N₂ system, NO is reduced to N₂ with about the same NO conversion as that in the NO/N₂ system but without NO₂ formation. In the NO/C₂H₄/O₂/N₂ system, the oxidation of NO to NO₂ is dramatically promoted. At 523 K, with the increase of the energy density, NO conversion increases rapidly first, and then almost stabilizes at 93–91% of NO conversion with 61–55% of NO₂ selectivity in the energy density range of 317–550 J L⁻¹. It finally decreases gradually at high energy density. A negligible amount of N₂O is formed in the above four systems. Of the four systems studied, NO conversion and NO₂ selectivity of the NO/C₂H₄/O₂/N₂ system are the highest, and NO/O₂/C₂H₄/N₂ system has the lowest electrical energy consumption per NO molecule converted.     

Formation of [Cp2TiSbMe2]2, [Cp2TiSb(SiMe3)2]2 and [Cp2TiCl]2·2Mes4Sb2

Reactions of [Cp₂Ti(btmsa)] (btmsa = bis(trimethylsilyl)acetylene) with R₄Sb₂ (R = Me, Me₃Si) give [Cp₂TiSbMe₂]₂ (1) or [Cp₂TiSb(SiMe₃)₂]₂ (2) respectively. [Cp₂TiCl]₂·2Mes₄Sb₂ (3) is serendipitously formed from [Cp₂Ti(btmsa)] and Mes₂SbH containing NH₄Cl traces.     

Synthesis and structural investigation of the compounds containing HF2 anions: Ca(HF2)2, Ba4F4(HF2)(PF6)3 and Pb2F2(HF2)(PF6)

Three new compounds Ca(HF₂)₂, Ba₄F₄(HF₂)(PF₆)₃ and Pb₂F₂(HF₂)(PF₆) were obtained in the system metal(II) fluoride and anhydrous HF (aHF) acidified with excessive PF₅. The obtained polymeric solids are slightly soluble in aHF and they crystallize out of their aHF solutions. Ca(HF₂)₂ was prepared by simply dissolving CaF₂ in a neutral aHF. It represents the second known compound with homoleptic HF environment of the central atom besides Ba(H₃F₄)₂. The compounds Ba₄F₄(HF₂)(PF₆)₃ and Pb₂F₂(HF₂)(PF₆) represent two additional examples of the formation of a polymeric zigzag ladder or ribbon composed of metal cation and fluoride anion (MF⁺)_n besides PbF(AsF₆), the first isolated compound with such zigzag ladder. The obtained new compounds were characterized by X-ray single crystal diffraction method and partly by Raman spectroscopy. Ba₄F₄(HF₂)(PF₆)₃ crystallizes in a triclinic space group P1¯ with a=4.5870(2) Å, b=8.8327(3) Å, c=11.2489(3) Å, α=67.758(9)°, β=84.722(12), γ=78.283(12)°, V=413.00(3) Å³ at 200 K, Z=1 and R=0.0588. Pb₂F₂(HF₂)(PF₆) at 200 K: space group P1¯, a=4.5722(19) Å, b=4.763(2) Å, c=8.818(4) Å, α=86.967(10)°, β=76.774(10)°, γ=83.230(12)°, V=185.55(14) ų, Z=1 and R=0.0937. Pb₂F₂(HF₂)(PF₆) at 293 K: space group P1¯, a=4.586(2) Å, b=4.781(3) Å, c=8.831(5) Å, α=87.106(13)°, β=76.830(13)°, γ=83.531(11)°, V=187.27(18) Å³, Z=1 and R=0.072. Ca(HF₂)₂ crystallizes in an orthorhombic Fddd space group with a=5.5709(6) Å, b=10.1111(9) Å, c=10.5945(10) Å, V=596.77(10) Å³ at 200 K, Z=8 and R=0.028.     

Synthesis and structure of three manganese oxalates: MnC2O4·2H2O, [C4H8(NH2)2][Mn2(C2O4)3] and Mn2(C2O4)(OH)2

Three manganese oxalates have been hydrothermally synthesized, and their structures determined by single-crystal X-ray diffraction. MnC₂O₄·2H₂O (I) is orthorhombic, P2₁2₁2₁, , , , , Z=4, final R, R_w=0.0832, 0.1017 for 561 observed data (I>3σ(I)). The one-dimensional structure consists of chains of oxalate-bridged manganese centers. [C₄H₈(NH₂)₂][Mn₂(C₂O₄)₃] (II) is triclinic, , , , , α=81.489(2)°, β=81.045(2)°, γ=86.076(2)°, , Z=1, final R, R_w=0.0467, 0.0596 for 1773 observed data (I > 3σ (I)). The three-dimensional framework is constructed from seven coordinate manganese and oxalate anions. The material contains extra-framework diprotonated piperazine cations. Mn₂(C₂O₄)(OH)₂ (III) is monoclinic, P2₁/c, , , , β=91.10(3)°, , Z=1, final R₁, wR2=0.0710, 0.1378 for 268 observed data (I>2σ (I)). The structure is also three dimensional, with layers of MnO₆ octahedra pillared by oxalate anions. The hydroxide group is found bonded to three manganese centers resulting in a four coordinate oxygen.