聚(丁二酸丁二酯-co-丁二酸丙二酯)的等温结晶行为研究

以1,4-丁二酸、1,4-丁二醇和1,3-丙二醇为原料通过直接熔融缩聚法合成了聚丁二酸丁二酯(PBS),聚丁二酸丙二酯(PPS)和聚(丁二酸丁二酯-co-丁二酸丙二酯)(PBSPS)等脂肪族聚酯.利用1H-NMR,WAXD,DSC和POM等研究了聚酯的结晶结构和结晶动力学过程等结晶行为.PBSPS的结晶晶型与PBS一致,说明只有丁二酸丁二酯(BS)单元结晶而丁二酸丙二酯(PS)单元处于无定形区.聚酯等温结晶后,在升温熔融过程中出现了多重熔融峰.分析表明多重熔融峰主要来自于聚酯升温过程中的熔融-重结晶行为.利用Avrami方程分析了聚酯的等温结晶动力学,Avrami指数n为2.2~2.8,说明聚酯等温结晶时主要以异相成核的三维生长方式进行;随着PS单元的增多,聚酯的表观结晶活化能升高,也就是说BS单元的结晶变得困难.POM观察到聚酯等温结晶时都出现了环带球晶现象,球晶形态会随着结晶温度和化学结构差异而改变.     

离子液体增塑改性玉米淀粉/聚丁二酸丁二醇酯共混材料的结构与性能

为考察离子液体对淀粉/聚丁二酸丁二醇酯(PBS)的作用效果,降低淀粉/PBS的脆性,以离子液体(1-丁基-3-甲基咪唑氯盐[BMIM]Cl)作为增塑改性剂通过熔融共混法制备了玉米淀粉/聚丁二酸丁二醇酯(PBS)共混材料,采用红外光谱(FTIR)、扫描电镜(SEM)、热重分析(TGA)、X射线衍射分析(XRD)及力学性能测试方法研究了[BMIM]Cl对淀粉/PBS共混材料结构和性能的影响.结果表明,[BMIM]Cl能与淀粉/PBS分子发生强相互作用,破坏淀粉/PBS共混物中原有的氢键与结晶结构,增强界面相互作用,改善相容性,进而改变淀粉/PBS共混材料的结构与性能;[BMIM]Cl的加入不影响淀粉/PBS的热稳定性,可使材料玻璃化转变温度(Tg)、结晶温度(Tc)、冷结晶温度(Tcc)及结晶度(Xc)降低.[BMIM]Cl具有显著降低淀粉/PBS脆性的作用,使其断裂伸长率大幅度增加,拉伸强度和弹性模量降低.     

热塑性淀粉/PBS共混物的微生物降解性研究

以甘油作为增塑剂,采用玉米淀粉与改性后的聚丁二酸丁二醇酯(PBS)熔融共混制备出淀粉/PBS共混材料.对这种改善了两相相容性的共混材料在特定微生物条件下的降解行为进行了研究.结果显示,共混物降解28天后,含有30%PBS的共混物质量损失达到35%左右,其力学性能只有降解前的20%,甘油含量减小和PBS含量增加均能减缓材料的降解.且随着降解时间的延长,PBS的结晶度和熔点有所提高.     

末端为磷酰胆碱基团的聚丁二酸丁二醇酯的酶促降解和热性能

以聚丁二酸丁二醇酯(PBS)为参照, 研究了酯酶Lipase AY30对亲水磷酰胆碱(PC)基团改性的聚丁二酸丁二醇酯(PBS-PC)的生物降解性能的影响. 结果显示, 在酯酶Lipase AY30作用下, 21 d后PBS的质量损失仅为1.9%, 而PBS-PC的质量损失了9.7%. 相同条件下扣除各自水解引起的质量损失(PBS 1.4%和PBS-PC 6.5%)后, PC亲水基团的引入对聚合物的降解起到了促进作用. 示差扫描量热(DSC)研究结果表明, 改性后的聚合物熔融温度和熔融焓降低, 玻璃化转变温度升高, 表明PC端基的引入降低了PBS的结晶能力, 非晶相结构的增多对聚合物降解有促进作用. 因此PBS-PC有望作为一种新的具有良好生物降解性和生物相容性的高分子材料, 应用于药物控释、基因治疗及组织工程等生物医用材料领域.     

生物可降解聚丁二酸/苯基丁二酸丁二醇酯系列共聚物的合成及其结晶行为

合成了一系列聚丁二酸/苯基丁二酸丁二醇共聚酯(PBSBS),利用DSC、1H-NMR和X射线等测试手段对共聚物组成、热力学性能、结晶性能、等温结晶行为进行了表征和研究.结果表明,含苯基的共聚单元的引入显著改变了聚丁二酸丁二醇酯(PBS)的热力学性能4,利用Hoffman-Week曲线得到的共聚物平衡熔点随共聚组分含量的增加显著降低,玻璃化转变温度则明显升高,结晶熔点符合无规共聚物的Flory方程.此外,利用Avrami方程对均聚物PBS以及共聚物PBSBS-10分别进行了等温结晶行为研究,结果表明共聚使结晶速率降低,PBS和PBSBS-10的Avrami指数分别介于2.8~3.0和2.7~2.9之间,结晶方式为三维生长异相成核,X射线测试结果表明共聚不影响晶体结构.     

聚丁二酸丁二醇酯的自成核结晶行为

利用差示扫描量热仪(DSC)研究了自成核对聚丁二酸丁二醇酯(PBS)的结晶行为的影响. 研究结果表明, PBS的有效自成核温度处理区间为118～120 ℃. PBS经自成核处理后结晶温度提高, 可以在100~118 ℃温度区间内迅速结晶. 同时, 研究了自成核处理后样品在100～104 ℃范围内的等温结晶行为、动力学过程及熔融行为. 结果表明, 随着等温结晶温度的升高, 结晶速率变慢, 熔融曲线出现多重熔融峰. Hoffman-Weeks方程分析结果表明, 自成核处理对PBS的平衡熔点没有影响. Avrami等温结晶动力学方程适合分析自成核处理样品的等温结晶动力学过程, 获得其动力学参数K与n, 其中n值偏大的原因在于自成核的样品结晶生长点增多. 根据Arrhenius方程, 计算获得PBS自成核处理后等温结晶活化能为-286 kJ/mol.     

含异山梨醇的全生物基PBS嵌段共聚酯的制备及性能

采用熔融扩链法制备了高分子量的全生物基聚丁二酸丁二醇酯(PBS)-聚丁二酸异山梨醇酯嵌段共聚酯.GPC测试结果表明,该嵌段共聚酯在较高的异山梨醇(Is)含量时仍具有较高的分子量,其M_n介于3.5×10~4~7.0×10~4之间.采用TGA和DSC对嵌段共聚酯的热稳定性和结晶性能进行了研究,结果表明嵌段共聚酯保持了PBS优异的热稳定性和结晶性能,即使异山梨醇含量达60 mol%,其熔点较PBS仅下降2 K.采用DMA分析了嵌段共聚酯的玻璃化转变温度T_g,发现随着异山梨醇含量的增加,其T_g随之升高,当Is含量为60mol%时,嵌段共聚酯的T_g高达68℃,并且共聚酯的2个链段具有很好的相容性.力学性能测试结果表明,异山梨醇的引入可使PBS的力学性能得到明显地提高和调控,随着异山梨醇含量的增加,嵌段共聚酯的拉伸强度先增加后降低,断裂伸长率约是PBS的2倍,其中,当异山梨醇含量达60 mol%时,嵌段共聚酯的屈服强度由PBS的35.0 MPa增至43.0 MPa.     

PTT/PET共混体系晶体形态与结晶性能的研究

用差示扫描量热仪(DSC)、广角X射线衍射(WAXD)和正交偏光显微镜研究了聚对苯二甲酸丙二酯(PTT)和聚对苯二甲酸乙二酯(PET)共混体系的晶体形态与结晶性能.结果表明,共混体系结晶性能与PTT的含量有关.PET的加入,使共混体系的球晶尺寸减小.球晶完善性降低.当PTT含量为40wt%～60wt%时,共混物分别出现了双重熔融峰和双重结晶峰.双重熔融峰是加热过程中熔融重结晶造成的,双重结晶峰说明不完善的晶体产生的次级结晶.     

生物可降解共聚物聚丁二酸/对苯二甲酸丁二醇酯(PBST)的序列结构及结晶性研究

制备了高分子量的聚丁二酸丁二醇酯,并通过与对苯二甲酸二甲酯的无规共聚调节其生物可降解性及力学性能,得到了具有优良机械性能和不同生物降解速度的一系列共聚物,并对共聚物序列结构、热力学性能、结晶性进行了研究.结果表明,该共聚物为无规共聚物,PBS和PBT分别结晶.共聚物的结晶熔点符合无规共聚物的Flory方程.     

PBSA-g-MG增容改性热塑性淀粉/PBSA复合材料

以过氧化二异丙苯(DCP)为引发剂,通过熔融接枝将马来酸酐(MA)和甲基丙烯酸缩水甘油酯(GMA)接枝到PBSA(聚丁二酸/聚己二酸-co-丁二醇酯)分子链上,制备了PBSA-g-MG增容剂。采用红外光谱和核磁共振氢谱对增容剂的化学结构进行表征,并探究了PBSA-g-MG的添加量对热塑性淀粉(TPS)与PBSA复合材料(TPS/PBSA)的力学性能、微观形貌、动态热机械性能和吸水性能的影响。结果表明,该增容剂可改善纤维增强的TPS/PBSA复合材料的界面相容性,TPS相与PBSA相的T_g相互靠近,TPS/PBSA的力学性能和耐水性提高。添加质量分数8%增容剂的TPS/PBSA复合材料在59%湿度下的力学强度可达19.4 MPa,比未增容的复合材料提高了将近130%。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.