Dioxouranium(VI) complexes ofN-(orthovanillidene)-anthranilic acid andN-(vanillidene)-anthranilic acid

Summary Two structurally related reagents,N-(orthovanillidene)-anthranilic acid (H₂L¹) andN-(vanillidene)anthranilic acid (H₂L²), have been used to synthesize new uranyl complexes having different metal-ligand ratios, e.g. 11, 23 and 12 using various starting materials. The products have been isolated in the solid state and characterized by elemental analyses, molar conductances in methanol, t.g.a., electronic, i.r., and¹H n.m.r. spectral data.     

Enhanced stereocomplex formation of poly(L-lactic acid) and poly(D-lactic acid) in the presence of stereoblock poly(lactic acid)

Stereoblock poly(lactic acid) (sb-PLA) is incorporated into a 1:1 polymer blend system of poly(L-lactic acid) (PLLA) and poly(D-lactic acid) (PDLA) that has a high molecular weight to study its addition effect on the stereocomplex (sc) formation of PLLA and PDLA. The ternary polymer blend films are first prepared by casting polymer solutions of sb-PLA, PLLA, and PDLA with different compositions. Upon increasing the content of sb-PLA in the blend films the sc crystallization is driven to a higher degree, while the formation of homo-chiral (hc) crystals is decreased. Lowering the molecular weight of the incorporated sb-PLA effectively increases the sc formation. Consequently, it is revealed that sb-PLA can work as a compatibilizer to improve the poor sc formation in the polymer blend of PLLA and PDLA.     

A new chiral acid for the resolution of racemic bases : (s)-(-)-(2-phenylcarbamoyloxy)propionic acid (carbamalactic acid)

(S)-(?)-Carbamalactic acid is the phenylcarbamate derived from natural (S)-lactic acid. This new chiral reagent was efficiently used for the resolution of racemic bases such as α-methylbenzylamine, ephedrine and α-(l-naphthyl)ethylamine.     

Iminobis(Methylenediphosphonic) acid

Conclusions When formamide was reacted with phosphorous acid and phosphorus trichloride, the formation of iminobis(methylenediphosphonic) acid was detected.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 4, pp. 865–868, April, 1987.The authors wish to express their graditude to Yu. P. Tsentalovich for helping with the NMR spectral analysis.     

Synthesis of the sialic acid (-)-KDN and certain epimers from (-)-3-dehydroshikimic acid or (-)-quinic acid

(-)-3-Dehydroshikimic acid (3-DHS, 4), a C(7)-building block now available in large quantity from corn syrup, has been converted into the sialic acid (-)-KDN (3) as well as its C-7- and C-8-epimers. (-)-Quinic acid can be used for the same purpose. [structure: see text]     

Stereoblock poly(lactic acid): synthesis via solid-state polycondensation of a stereocomplexed mixture of poly(L-lactic acid) and poly(D-lactic acid)

Stereoblock poly(lactic acid) consisting of D- and L-lactate stereosequences can be successfully synthesized by solid-state polycondensation of a 1:1 mixture of poly(L-lactic acid) and poly(D-lactic acid). In the first step, melt-polycondensation of L- and D-lactic acids is conducted to synthesize poly(L-lactic acid) and poly(D-lactic acid) with a medium-molecular-weight, respectively. In the next step, these poly(L-lactic acid) and poly(D-lactic acid) are melt-blended in 1:1 ratio to allow formation of their stereocomplex. In the last step, this melt-blend is subjected to solid-state polycondensation at temperature where the dehydrative condensation is allowed to promote chain extension in the amorphous phase with the stereocomplex crystals preserved. Finally, stereoblock poly(lactic acid) having high-molecular-weight is obtained. The stereoblock poly(lactic acid) synthesized by this way shows a higher melting temperature in consequence of the controlled block lengths and the resulting higher-molecular-weight. The product characterization as well as the optimization of the polymerization conditions is described. Changes in M(w) of stereoblock poly(lactic acid) (sb-PLA) as a function of the reaction time.     

Photo-grafting Poly(acrylic acid) onto Poly(lactic acid) Chains in Solution

Poly(lactic acid)(PLA)is one of the most important bio-plastics,and chemical modification of the already-polymerized poly(lactic acid)chains may enable optimization of its material properties and expand its application areas.In this study,we demonstrated that poly(lactic acid)can be readily dissolved in acrylic acid at room temperature,and acrylic acid can be graft-polymerized onto poly(lactic acid)chains in solution with the help of photoinitiator benzophenone under 254 nm ultraviolet(UV)irradiation.Similar photo-grafting polymerization of acrylic acid(PAA)has only been studied before in the surface modification of polymer films.The graft ratio could be controlled by various reaction parameters,including irradiation time,benzophenone content,and monomer/polymer ratios.This photo-grafting reaction resulted in high graft ratio(graft ratio PAA/PLA up to 180%)without formation of homopolymers of acrylic acid.When the PAA/PLA graft ratio was higher than 100%,the resulting PLA-g-PAA polymer was found dispersible in water.The pros and cons of the photo-grafting reaction were also discussed.     

Calorimetric investigation of poly(methacrylic acid) and poly(acrylic acid) in aqueous solution

The enthalpy of dissociation of poly(acrylic acid) and of poly(methacrylic acid) in water and in 0.5N NaCl at 25°C has been measured over a wide range of degrees of neutralization of the polyelectrolytes. In the case of poly(methacrylic acid) the calorimetric data permit the direct evaluation of the enthalpy of conformational transition of the polymer. For this transition, with the aid of standard free energy data derived from potentiometric titrations, the change in entropy was also estimated. The relative accuracy of the thermodynamic data, and the possibility of deriving therefrom information on the mechanism of transitions of the type, globular coils → expanded coils for partially hydrophobic synthetic polyelectrolytes in aqueous solution are discussed.     

由(1S)-cis-菊酸合成(1R)-cis-二溴菊酸

拟除虫菊脂是在研究天然除虫菊脂化学的基础上发展起来的一类高效低毒,广谱杀虫剂。其中,溴氰菊脂是活性较高,光稳定性较好的一种菊脂类杀虫剂, 它是具有(IRcis.αs) 构型的单一光学异构体。 生产溴氰菊脂的关键中间体是IR-cis-)二溴菊脂。本文报道利用化学剪切法将(is)-cis-菊脂转化为(IR-cis-)二溴菊脂的新方法。     

Effect of urea on poly(methacrylic acid) and poly(acrylic acid) aqueous solutions

The effects of urea on aqueous solutions of both poly(methacrylic acid (PMA) and poly(acrylic acid) (PAA) have been investigated by using potentiometry, viscometry and study of the fluorescence of Auramine O, a cationic dye. The viscosity behaviour of unionized PMA obtained from direct dissolution of solid powder shows that the unneutralized macromolecules can be associated in water. The stability of such “aggregates” seems weak as indicated by their disappearance as soon as the charge density is very low. For PMA salt solution percolated through a cation (H⁺) exchange resin column, no association is observed. The pH-dependent conformational behaviour of PMA which, contrary to PAA, presents compact conformations in water at low charge density is discussed in terms of solvophobic/solvophilic interactions. It is shown that, even for urea concentration up to 8 M, the compact conformations of PMA are not completely destroyed. The formation of H⁺/urea complex is taken into account.     

The synthesis and characterization of monodisperse poly(acrylic acid) and poly(methacrylic acid)

A number of polyacrylic (PAA) and polymethacrylic (PMAA) acids have been synthesized by living anionic polymerization of the monomeric tert-butyl esters followed by subsequent hydrolysis of the corresponding polyesters. The necessary precautions were taken in order to assure good molecular weight control, as well as high yields in the polymerization reactions. The intermediate and final polymers were characterized by gel permeation chromatography and NMR-H¹ spectrometry.