间苯二酚在金纳米粒子/碳纳米管修饰电极上的电化学行为

制备了金纳米粒子/碳纳米管复合修饰玻碳电极,并用于研究间苯二酚的电化学反应过程,结果发现金纳米粒子与碳纳米管均对间苯二酚的电化学反应具有催化作用,复合修饰电极很好地利用了两种纳米粒子的电催化活性,对间苯二酚具有更强的电化学催化效果,为应用电化学技术进行间苯二酚的检测提供了可能。同时研究了碳纳米管的用量、复合膜的层数、pH值、介质和扫速等条件对间苯二酚的电化学信号的影响情况。     

纳米氧化锌/镍修饰电极检测葡萄酒中甘油含量

本文制备了纳米氧化锌负载镍修饰电极,并将其应用于葡萄酒中甘油的检测。首先通过直接沉淀法合成氧化锌纳米粒子,并采用扫描电子显微镜和X-射线衍射仪对制备的氧化锌纳米粒子进行微观结构表征。然后,利用电化学合成法使镍纳米粒子均匀负载在氧化锌纳米粒子表面以制备具有甘油催化作用的修饰电极,采用循环伏安法研究了该修饰电极的电化学性能及最优操作条件。结果表明,反应溶液pH值为13.5时,该修饰电极性能最优,该修饰电极的反应过程为扩散控制过程;该修饰电极的线性检测范围为0.2 mM～60 mM,检测限为7.35×10~(-5) mol·L~(-1)(S/N=3),灵敏度为42.02 mA/(mol·cm~2)。另外,该修饰电极具有很强的抗干扰和样品检测能力,可应用于葡萄酒中甘油含量的快速检测。     

金纳米粒子/碳纳米管复合修饰玻碳电极对对苯二酚氧化还原反应的电催化性能

以对苯二酚为目标化合物比较研究了金纳米粒子、碳纳米管、金纳米粒子/碳纳米管3种纳米粒子修饰电极的电催化性能,结果发现:3种纳米粒子修饰电极均对对苯二酚的电化学信号具有增强作用。电化学阻抗谱和修饰层数试验表明:金纳米粒子的增强效果来自于金纳米粒子的电催化作用,碳纳米管的增强作用来自于电催化作用与大的电极表面积,金纳米粒子/碳纳米管复合修饰电极综合利用了两种纳米粒子的特性,表现出了更为优良的电催化行为。对苯二酚在修饰电极上的电化学过程均为扩散控制过程。     

纳米金修饰碳糊电极上甲氨蝶呤的电化学测定及其与鲱鱼精DNA相互作用的研究

制备了纳米金修饰碳糊电极,使用循环伏安法(CV)研究了甲氨蝶呤(MTX)在该修饰电极上的电化学特性,并建立了纳米金修饰碳糊电极电化学测定MTX的新方法.利用线性扫描伏安法(LSV)和方波伏安法(SWV)研究了MTX与鲱鱼精DNA的相互作用.实验发现,在pH 3.6 HAc-NaAc缓冲溶液中,MTX在0.86 V处有一灵敏的氧化峰,氧化峰电流Ipa与MTX的浓度在0.5 ～10.0 μmol·L-1范围内呈良好的线性关系,方法检出限(S/N=3)为0.2μmol·L-1.对3.0 μmol·L-1的MTX进行11次平行测定,其RSD为4.7％.该修饰电极可用于MTX样品的测定,结果满意.当不同浓度鲱鱼精DNA加入MTX溶液后,氧化峰电位正移,氧化峰电流降低,表明MTX与鲱鱼精DNA之间发生了相互作用,形成了非电活性化合物.电化学研究表明,MTX与鲱鱼精DNA之间的结合比为2∶1,结合常数为4.6×105 L·mol-1.     

聚番红花红-纳米金复合膜修饰电极对鸟嘌呤的测定及应用研究

制备了聚番红花红-纳米金复合膜修饰的玻碳电极并用扫描电镜及交流阻抗进行了表征。利用差分脉冲法(DPV)研究了鸟嘌呤在此修饰电极上的电化学行为。结果表明聚番红花红-纳米金复合膜对于鸟嘌呤的氧化能够起到明显的电催化作用。在优化条件下,鸟嘌呤的氧化峰电流与其浓度在6.0×10-7~7.0×10-5mol·L-1范围内呈良好的线性关系,检出限为8.0×10-8mol·L-1。该方法快速,准确,将聚番红花红-纳米金复合膜修饰电极用于实际样品的测定,结果满意。     

直接电沉积金纳米粒子修饰氧化铟锡电极测定亚硝酸根

以电化学沉积法一步制得了金纳米粒子(GNP)修饰氧化铟锡(ITO)电极,采用紫外、扫描电镜及循环伏安法对GNP/ITO修饰电极进行了表征。结果表明,金纳米粒子在ITO电极表面呈球形,分布均匀无团聚,粒径约30 nm。该修饰电极具有良好的电化学性能,在pH 2.2的Na2HPO4-柠檬酸缓冲溶液中其氧化峰电流与NO2-的浓度呈良好的线性关系,线性范围为5×10-6~5.5×10-4mol/L,线性回归方程为:i(μA)=1.07 136C(mmol/L),相关系数r=0.9969;检出限可达1.0×10-6mol/L。该修饰电极用于废水中NO2-的测定,结果令人满意。     

纳米金/丝素复合膜修饰电极制备及对对苯二酚的电催化作用

将丝素还原HAuCl4制备的纳米金/丝素溶胶修饰在金电极表面制备了纳米金/丝素复合膜修饰电极,用于对苯二酚的催化氧化。实验表明,该修饰电极具有很好的电化学性能,在pH3.55磷酸盐缓冲溶液中以该修饰电极对对苯二酚进行检测,对苯二酚在4.0×10-6~1.0×10-4mol/L浓度范围内,其氧化峰电流与浓度呈良好的线性关系,其线性回归方程为i(μA)=0.2614 5.3539c,r=0.9995;检出限为2.0×10-7mol/L,灵敏度良好,用于实际样品分析,结果令人满意。     

己硫醇二茂铁复合金纳米粒子修饰电极对多巴胺的催化性能研究

将自行合成的己硫醇二茂铁自组装于金纳米粒子表面,获得己硫醇二茂铁复合金纳米粒子（Au@S（CH2）6Fc）。采用滴涂法将制备的复合纳米粒子固定于玻碳电极表面,制备Au@S（CH2）6Fc修饰电极,采用循环伏安法对修饰电极的电化学性能进行考察。将制备的修饰电极用于对神经递质多巴胺（DA）的催化氧化性能研究。结果表明,该修饰电极对DA具有显著的催化氧化作用,线性范围为1.0×10^-6-2.6×10^-3mol/L,检出限为3.0×10^-7mol/L。     

铁氰化镍的磁性纳米粒子合成及化学修饰电极的制备

将镍粒子表面功能化,合成了磁性纳米铁氰化镍（NiHCF）粒子,制备了磁性NiHCF修饰磁控玻碳电极。 在pH=7.4的磷酸盐缓冲溶液中,磁性NiHCF纳米粒子修饰电极对水合肼氧化有显著的催化作用,NiHCF的氧化峰电流与水合肼浓度在0~1.29×10-4 mol/L范围内呈良好的线性关系（安培法）,检出限为2.1×10-8 mol/L。 研究了磁性NiHCF粒子修饰电极对水合肼的电化学响应以及电极的性能,并将其应用于水样中肼的测定。 该修饰电极具有灵敏度高、选择性好、电极易更新、稳定性好和制作简单等优点。     

纳米金修饰玻碳电极在抗坏血酸共存下选择性测定去甲肾上腺素

利用电沉积的方法制得纳米金修饰玻碳电极 ,该修饰电极对去甲肾上腺素 (NE)氧化反应有催化作用。去甲肾上腺素在纳米金修饰玻碳电极上有很强的吸附作用。研究了磷酸缓冲溶液的pH值和浓度对NE的电化学行为的影响。从去甲肾上腺素和抗坏血酸在纳米金修饰电极的循环伏安图上可观察到两个明显分开的氧化峰 ,峰电位差达到 1 3 1mV ,因此 ,可利用该修饰电极在抗坏血酸存在下选择性测定去甲肾上腺素 ,线性范围为 1× 1 0 - 4 ～5× 1 0 - 6 mol L。     

Fabrication of Trimetallic Pt−Pd−Co Porous Nanostructures on Reduced Graphene Oxide by Galvanic Replacement: Application to Electrocatalytic Oxidation of Ethylene Glycol

In present work, reduced graphene oxide nanosheets (rGO) decorated with trimetallic three‐dimensional (3D) Pt−Pd−Co porous nanostructures was fabricated on glassy carbon electrode (Pt−Pd−Co/rGO/GCE). First, GO suspension was drop‐casted on the electrode surface, then GO film reduction was carried out by cycling the potential in negative direction to form the rGO film modified GCE (rGO/GCE). Then, electrodeposition of the cobalt nanoparticles (CoNPs) as sacrificial seeds was performed onto the rGO/GCE by using cyclic voltammetry. Afterward, Pt−Pd−Co 3D porous nanostructures fabrication occurs through galvanic replacement (GR) method based on a spontaneous redox process between PtCl₂, PdCl_2, and CoNPs. The morphology and structure of the Pt−Pd−Co/rGO porous nanostructure film was characterized by scanning electron microscopy, energy dispersive spectroscopy and X‐ray diffraction method. The performance of the prepared electrode was investigated by various electrochemical methods including, cyclic voltammetry and electrochemical impedance spectroscopy. The electrocatalytic activity of the as‐prepared modified electrode with high surface areas was evaluated in anodic oxidation of ethylene glycol. The study on electrocatalytic performances revealed that, in comparison to various metal combinations in modified electrodes, trimetallic Pt−Pd−Co/rGO/GCE exhibit a lower onset potential, significantly higher peak current density, high durability and stability for the anodic oxidation of ethylene glycol. The excellent performances are attributed to the rGO as catalysts support and resulting synergistic effects of the trimetallic and appropriate characteristics of the resulted 3D porous nanostructures. Moreover, the influence of various concentrations of ethylene glycol, the potential scan rate and switching potential on the electrode reaction, in addition, long‐term stability have been studied by chronoamperometric and cyclic voltammetric methods.     

Palladium nanoparticle decorated carbon ionic liquid electrode for highly efficient electrocatalytic oxidation and determination of hydrazine

In this work arrays of palladium nanoparticles were synthesized on carbon ionic liquid electrode (CILE) (Pd/CILE), and the electrocatalytic oxidation of hydrazine was investigated using this electrode. Electrochemical oxidation of hydrazine in phosphate buffer (pH 7) was performed using cyclic voltammetry and square wave voltammetric techniques (SWV). Using the proposed electrode, a highly reproducible and well-defined peak was obtained for hydrazine at a very low potential of −0.02 V versus Ag/AgCl. A linear dynamic range of 5-800 μM with an experimental detection limit of 0.82 μM was obtained. These results show that the proposed electrode displays better electrocatalytic activity compared to the previously reported palladium modified electrodes towards oxidation of hydrazine.     

Fabrication of High‐aspect Ratio (HAR) Palladium Nanorod‐modified Electrodes for Raman Spectroelectrochemical Studies of Thiolate Desorption from HAR Nanomaterials

We describe a method to fabricate electrodes modified with high‐aspect ratio (HAR) palladium (Pd) nanorods derived from the electrochemical reduction of Pd salts in polycarbonate track‐etched membranes. The HAR Pd nanorod‐modified electrode platform enables direct spectroscopic observation of electrochemical processes particular to HAR forms of nano‐Pd using Raman spectroelectrochemistry. In the present study, we use this platform to observe an anomalous mechanism of oxidative electrochemical desorption of the probe molecule benzenethiol (BT) from the HAR Pd surface. At HAR Pd, the Pd?S bond between the Pd nanorods and BT severs upon oxidation of the Pd surface, whereas on the surface of spherical nano‐Pd, the C?S bond in BT is broken, as is more typically observed for sulfur‐containing organic molecules adsorbed to Pd surfaces. Using this probe reaction, we demonstrate the suitability of this HAR nanorod‐modified electrode platform for the investigation of anomalous electrochemical phenomena observed at HAR Pd for reactions that involve adsorbed intermediates in general – including not only adsorbed sulfur – but in principle also for the electrochemical oxidation of alternative fuels such as ethanol and methanol.     

Nanocellulose/Carbon Nanoparticles Nanocomposite Film Modified Electrode for Durable and Sensitive Electrochemical Determination of Metoclopramide

A novel electrochemical sensor based on nanocellulose‐carbon nanoparticles (NC‐CNPs) nanocomposite film modified glassy carbon electrode (GCE) is developed for the analysis of metoclopramide (MCP). Atomic force microscopy, scanning electron microscopy and electrochemical impedance spectroscopy were used to characterize the roughness, surface morphology and performance of the deposited modifier film on GCE. SEM image demonstrated that modifier nanoparticles are uniformly deposited on GCE, with an average size of less than 50 nm. The electrochemical behavior of MCP and its oxidation product is studied using linear sweep and cyclic voltammetry over a wide pH range on NC‐CNPs modified glassy carbon electrode. The results revealed that the oxidation of MCP is an irreversible and pH‐dependent process that proceeds in an adsorption‐controlled mechanism and results in the formation of a main oxidation product, which adsorbs on the surface of NC‐CNPs/ GCE. The modified electrode showed a distinctive anodic response towards MCP with a considerable enhancement (49 fold) compared to the bare GCE. Under the optimized conditions, the modified electrode exhibited a wide linear dynamic range of 0.06–2.00 µM with a detection limit of 6 nM for the voltammetric determination of MCP. The prepared modified electrode showed several advantages such as simple preparation method, high stability, reproducibility, and repetitive usability. The modified electrode is successfully applied for the accurate determination of trace amounts of MCP in pharmaceutical and clinical preparations.     

钯纳米粒子在电极表面的制备及其对氧的催化还原

纳米微粒的体积效应使其成为表面纳米工程及功能化纳米结构材料制备的理想研究对象 [1～ 3] .纳米粒子具有独特的电子、催化及光学特性[4 ] ,近年来关于纳米粒子的制备及其在材料科学领域中的应用受到研究者的极大关注 .而贵金属纳米粒子由于其在催化领域中的广泛应用而成为最重要的研究对象之一[5,6 ] .电催化氧还原是一直为化学家瞩目的研究领域[7～ 9] .研究主要目的之一是寻找合适的氧电极反应催化剂 ,并使之能够应用于燃料电池中 .其中催化氧电极材料研究得最多的是贵金属 Pt[10 ,11] .贵金属 Pd对氧催化还原的研究工作很少 .我们首次…     

Sensitive determination of dopamine in the presence of uric acid and ascorbic acid using TiO2 nanotubes modified with Pd, Pt and Au nanoparticles

A simple modified TiO(2) nanotubes electrode was fabricated by electrodeposition of Pd, Pt and Au nanoparticles. The TiO(2) nanotubes electrode was prepared using the anodizing method, followed by modifying Pd nanoparticles onto the tubes surface, offering a uniform conductive surface for electrodeposition of Pt and Au. The performance of the modified electrode was characterized by cyclic voltammetry and differential pulse voltammetry methods. The Au/Pt/Pd/TiO(2) NTs modified electrode represented a high sensitivity towards individual detection of dopamine as well as simultaneous detection of dopamine and uric acid using 0.1 M phosphate buffer solution (pH 7.00) as the base solution. In both case, electro-oxidation peak currents of dopamine were linearly related to accumulated concentration over a wide concentration range of 5.0 × 10(-8) to 3.0 × 10(-5) M. However in the same range of dopamine concentration, the sensitivity had a significant loss at Pt/Pd/TiO(2) NTs electrode, suggesting the necessity for Au nanoparticles in modified electrode. The limit of the detection was determined as 3 × 10(-8) M for dopamine at signal-to-noise ratio equal to 3. Furthermore, the Au/Pt/Pd/TiO(2) NTs modified electrode was able to distinguish the oxidation response of dopamine, uric acid and ascorbic acid in mixture solution of different acidity. It was shown that the modified electrode possessed a very good reproducibility and long-term stability. The method was also successfully applied for determination of DA in human urine samples with satisfactory results.     

A Membraneless Glucose/O2 Biofuel Cell Based on Pd Aerogels

In this study, we introduce the first membraneless glucose/O₂ biofuel cell using Pd‐based aerogels as electrode materials. The bioanode was fabricated with a coimmobilized mediator and glucose oxidase for the oxidation of glucose, in which ferrocenecarboxylic acid was integrated into a three‐dimensional porous beta‐cyclodextrin‐modified Pd aerogel to mediate the bioelectrocatalytic reaction. Bilirubin oxidase and Pd–Pt alloy aerogel were confined to an electrode surface, which realized the direct bioelectrocatalytic function for the reduction of O₂ to H₂O with a synergetic effect at the biocathode. By employing these two bioelectrodes, the assembled glucose/O₂ biofuel cell showed a maximum power output of 20 μW cm^?2 at 0.25 V.     

球状多孔Pd纳米粒子超结构的合成及其对甲酸的电催化氧化

在丙酮／水混合溶剂中,以氯代十六烷基吡啶为结构导向剂,水合肼还原PdCl42-,制得了直径范围在30～50nm之间的球状多孔Pd纳米粒子超结构．实验表明,氯代十六烷基吡啶对球状多孔Pd纳米粒子超结构的形成起着重要的作用,不加该表面活性剂时,得到的是实心Pd纳米粒子;而丙酮主要影响表面活性剂胶束的尺寸．此外,本文还研究了球状多孔Pd纳米粒子超结构对甲酸氧化的电催化活性,在0．5mol／L H2SO4＋0．5mol／L HCOOH溶液中的循环伏安结果表明,球状多孔Pd纳米粒子超结构修饰电极在酸性溶液中电催化氧化甲酸的峰电流约为180mA／mg,明显优于实心Pd纳米粒子修饰电极（峰电流为120mA／mg）,且表现出较高的稳定性．     

Pt电极上Sb，S吸附原子对正丁醇电催化氧化性能的影响

运用电化学循环伏安和石英晶体微天平研究了0.1 mol/L H2SO4 溶液中正丁醇（1-BL）在Pt电极和以Sb，S吸附原子修饰的Pt（Pt/Sbad和Pt/Sad）电极上电催化氧化过程。从电极表面质量变化表明正丁醇的氧化与电极表面氧物种有着极其密切的关系。Pt电极表面Sb吸附原子能在较低的电位下吸附氧，可显著提高正丁醇电催化氧化活性。与Pt电极相比较，Sb吸附原子修饰的Pt电极使正丁醇氧化的峰电位负移了0.33 V，峰电流增大了近一倍。相反，Pt电极表面S吸附原子的氧化会消耗表面氧物种，抑制了正丁醇的电氧化。本文从表面质量变化提供了吸附原子电催化作用的新数据。     

Sensitive Voltammetric Determination of Captopril Using a Carbon Paste Electrode Modified with Nano-TiO2/Ferrocene Carboxylic Acid

A carbon paste electrode (CPE) modified with ferrocene carboxylic acid (FcCA) and TiO2 nanoparticles was constructed by incorporating TiO2 nanoparticles and ferrocene carboxylic acid into the carbon paste matrix.The electrochemical behavior of captopril (CAP) at the surface of the modified electrode was investigated using electroanalytical methods.The modified electrode showed excellent electrocatalytic activity for the oxidation of CAP in aqueous solutions at physiological pH values.Cyclic voltammetric curves showed that the oxidation of CAP at the surface of the modified electrode reduced its overpotential by more than 290 mV.The modified electrode was used for detecting captopril using cyclic voltammetry and square wave voltammetry techniques.A calibration curve in the range of 0.03 to 2400μmol/L was obtained that had a detection limit of 0.0096 μmol/L (3σ) under the optimized conditions.The modified electrode was successfully used for the determination of captopril in pharmaceutical and biological samples.