Desolvation and Dehydrogenation of Solvated Magnesium Salts of Dodecahydrododecaborate: Relationship between Structure and Thermal Decomposition

Attempts to synthesize solvent‐free MgB₁₂H₁₂ by heating various solvated forms (H₂O, NH₃, and CH₃OH) of the salt failed because of the competition between desolvation and dehydrogenation. This competition has been studied by thermogravimetric analysis (TGA) and temperature‐programmed desorption (TPD). Products were characterized by IR, solution‐ and solid‐state NMR spectroscopy, elemental analysis, and single‐crystal or powder X‐ray diffraction analysis. For hydrated salts, thermal decomposition proceeded in three stages, loss of water to form first hexahydrated then trihydrated, and finally loss of water and hydrogen to form polyhydroxylated complexes. For partially ammoniated salts, two stages of thermal decomposition were observed as ammonia and hydrogen were released with weight loss first of 14 % and then 5.5 %. Thermal decomposition of methanolated salts proceeded through a single step with a total weight loss of 32 % with the release of methanol, methane, and hydrogen. All the gaseous products of thermal decomposition were characterized by using mass spectrometry. Residual solid materials were characterized by solid‐state ¹¹B magic ‐ angle spinning (MAS) NMR spectroscopy and X‐ray powder diffraction analysis by which the molecular structures of hexahydrated and trihydrated complexes were solved. Both hydrogen and dihydrogen bonds were observed in structures of [Mg(H₂O)₆B₁₂H₁₂] ? 6 H₂O and [Mg(CH₃OH)₆B₁₂H₁₂] ? 6 CH₃OH, which were determined by single‐crystal X‐ray diffraction analysis. The structural factors influencing thermal decomposition behavior are identified and discussed. The dependence of dehydrogenation on the formation of dihydrogen bonds may be an important consideration in the design of solid‐state hydrogen storage materials.     

A New Sodium Borate: Na[B6O8(OH)3]·6H2O·H3BO3

The structure of [B₆H₉NaO₁₄, H₃BO₃, 6H₂O] was determined by single‐crystal X‐ray diffraction and further analyzed by FTIR spectroscopy and differential thermal/thermogravimetric analysis. The asymmetric unit contains Na–O polyhedra (distorted octahedron), [B₆O₈(OH)₃]^– fundamental building blocks, one free water molecule and one free H₃BO₃ molecule. In the hexaborate anion, three B₃O₃ rings are linked by a common oxygen atom with five trigonal and one tetrahedral boron atoms. The hexaborate group is also linked to the oxygenated environment of the sodium atom by three other six‐membered rings, each of which involve two boron atoms, three oxygen atoms, and sodium as the joint atom.     

Morpholine adducts of Co, Ni, and Mn benzoylacetonates: isostructurality and C–H···O hydrogen bonding

Morpholine adducts of nickel(II), cobalt(II), and manganese(II) benzoylacetonates, as well as a morpholine solvate of manganese(II) benzoylacetonate, were prepared and characterized by X-ray diffraction and thermal analysis. All four compounds crystallize in the P2₁/c space group with two complex molecules per unit cell. The morpholine solvate, along with the two adduct molecules, also contains four solvent morpholine molecules in the unit cell. The non-solvate compounds are isostructural, with crystal structures comprising 2D networks formed by C–H···O hydrogen bonding between phenyl rings and morpholine oxygen atoms. The topology of these networks can be described as intersecting C₂²(24) chains forming R₄⁴(48) rings. Networks with the same topology are also present in the solvate, but they are heavily distorted due to the presence of solvent morpholine molecules. Thermogravimetric analysis shows similar behavior of the non-solvate compounds upon thermal decomposition, with three degradation steps which can be related to gradual loss of morpholine molecules and subsequent overall decomposition. Decomposition of the solvate also proceeds in several steps, the first of which can be related to loss of solvent morpholine molecules and the further steps are analogous to those in the non-solvate compounds.     

Thermal degradation studies of alkyl-imidazolium salts and their application in nanocomposites

Increasing the thermal stability of organically-modified layered silicates is one of the key points in the successful technical application of polymer-layered silicate nanocomposites on the industrial scale. To circumvent the detrimental effect of the lower thermal stability of alkyl ammonium-treated montmorillonite, a series of alkyl-imidazolium molten salts were prepared and characterized by elemental analysis, thermogravimetry (TGA) and thermal desorption mass spectroscopy (TDMS). The effect of counter ion, alkyl chain length and structural isomerism on the thermal stability of the imidazolium salts was investigated. Alkyl-imidazolium-treated montmorillonite clays were prepared by ion exchange of the imidazolium salts with Na-montmorillonite. These organically-modified clays were characterized by X-ray diffraction (XRD), TDMS and thermogravimetry coupled with Fourier transform infrared spectroscopy (TGA-FTIR), and compared to the conventional quaternary alkyl ammonium montmorillonite. Results indicate that the counter ion has an effect on the thermal stability of the imidazolium salts, and that imidazolium salts with PF₆⁻, N(SO₂CF₃)₂⁻ and BF₄⁻ anions are thermally more stable than the halide salts. A relationship was observed between the chain length of the alkyl group and the thermo-oxidative stability; as the chain length increased from propyl, butyl, decyl, hexadecyl, octadecyl to eicosyl, the stability decreased. The results also show that the imidazolium-treated montmorillonite has greater thermal stability compared to the imidazolium halide. Analysis of the decomposition products by FTIR provides an insight about the decomposition products which are water, carbon dioxide and hydrocarbons.     

三氧化二硼和五硼酸钠水合物非晶结构

X射线衍射法测量了三氧化二硼及五硼酸钠水合物的非晶结构, 通过非晶衍射实验数据处理, 得到了它们的径向分布函数(RDF). 模型定量计算, 得到了其短程有序结构, 三氧化二硼水合物非晶中75%的硼参与形成平面硼氧六元环(boroxol), 给出了环内ortho-B-O, meta-O-O, meta-B-B和para-B-O相互作用的距离和作用数, 支链与硼氧六元环之间的夹角为125°±15°; 五硼酸钠水合物非晶中, 由两个硼氧三角形(B_△)和一个硼氧四面体(B_□)构成的两个变形六元环通过公共顶点(B_□)相连而形成五硼酸阴离子, 高度有序的离子内相互作用占绝对优势. 六配位Na^＋与五硼酸阴离子中一端氧相连, Na-B特征距离为0.330 nm.     

Composite host lattices of 4,4′‐sulfonyldibenzoate water/boric acid in two tetrapropylammonium inclusion compounds

Two novel inclusion compounds of 4,4′‐sulfonyldibenzoate anions and tetrapropylammonium cations with different ancillary molecules of water and boric acid, namely bis(tetrapropylammonium) 4,4′‐sulfonyldibenzoate dihydrate, 2C₁₂H₂₈N⁺·C₁₄H₈O₆S²⁻·H₂O ( 1 ), and bis(tetrapropylammonium) 4,4′‐sulfonyldibenzoate bis(boric acid), 2C₁₂H₂₈N⁺·C₁₄H₈O₆S²⁻·2H₃BO₃ ( 2 ), were prepared and characterized using single‐crystal X‐ray diffraction. In the two salts, the host 4,4′‐sulfonyldibenzoic acid molecules, which are converted to the corresponding anions under basic conditions, can be regarded as proton acceptors which link different proton donors of the ancillary molecules of water or boric acid. In this way, an isolated hydrogen‐bonded tetramer is constructed in salt 1 and a ribbon is constructed in salt 2 . The tetramers and ribbons are then packed in a repeating manner to generate various host frameworks, and the tetrapropylammonium guest counter‐ions are contained in the cavities of the host lattices to give the final stable crystal structures. In these two salts, although the host anion and guest cation are the same, the difference in the ancillary small molecules results in different structures, indicating the significance of ancillary molecules in the formation of crystal structures.     

Structural,infrared spectral and thermogravimetric analysis of a hydrogen-bonded assembly of cobalt(II) and nickel(II) mixed complex cations with hexamethylenetetraamine and aqua ligands: {[M(hmt)2(H2O)4][M(H2O)6]}(SO4)2·6H2O

The synthesized cobalt(II) and nickel(II) complexes {[M(hmt)₂(H₂O)₄][M(H₂O)₆]}(SO₄)₂·6H₂O [M?=?Co(II) (1) and Ni(II) (2), hmt?=?hexamethylenetetraamine] share the same general formula and chemical name {[bis(hexamethylenetetraamine)tetraaquametal(II)][hexaaquametal(II)]} disulfate hexahydrate. Complexes 1 and 2 have been characterized by elemental analysis, infrared spectroscopy, thermal analysis and magnetic moment determination. Each complex has two different cationic complexes co-crystallizing with the sulfate anions. The crystal structure of 1has been determined. Both complex cations in 1 have distorted octahedral geometry and they are linked to the sulfate anions through the coordinated and lattice water molecules. Each sulfate anion is hydrogen bonded to ten water molecules; two of its oxygen atoms have two hydrogen bonds each while the other two oxygen atoms have three hydrogen bonds each. The three uncoordinated nitrogen atoms of hmt in each [Co(hmt)₂(H₂O)₄]²⁺ cation are hydrogen bonded to water molecules of adjacent [Co(H₂O)₆]²⁺ cations. The thermal decomposition of 1 has been investigated further by analyzing the FTIR spectra of the residues formed from each decomposition step, and the data have contributed to establishing the thermal decomposition pathway of both 1and 2.     

Preparation and properties of antibacterial ABS plastics based on polymeric quaternary phosphonium salts antibacterial agents

Antibacterial acrylonitrile‐butadiene‐styrene (ABS) plastics were prepared by adding polymeric quaternary phosphonium salts as antibacterial agents through a double screw extruder. The novel polymeric quaternary phosphonium salts (PBrMAP‐n) with alkyl chain length ranging from 3 to 11 were synthesized, and their chemical structures were confirmed by Nuclear magnetic resonance hydrogen spectroscopy (¹H‐NMR) and Fourier transform infrared spectroscopy (FT‐IR) spectra. The thermogravimetric analysis (TGA) results showed that all of the antibacterial agents had good thermal stability. The influence of addition amount as well as the alkyl chain length on mechanical properties and antibacterial properties was investigated. Compared with the pure ABS, all of PBrMAP‐n containing specimens had comparable tensile strength and flexural properties but reduced impact strength. Only samples with 10 wt% of PBrMAP‐11 exhibited more than 90% antibacterial efficiency against Escherichia coli and Staphylococcus aureus.     

Étude par spectroscopie infrarouge de la structure du cation mg(h2o)62+ dans quelques sels de magnésium hydratés

The infrared spectra of eight hexahydrated magnesium salts have been investigated in the 4000-2000 cm^?1 range. The stretching H₂O, D₂O and HDO water bands are discussed. Two types of hydrogen bond depending on the acceptor properties of the anion can be distinguished: the water molecules are bonded to anions or to other water molecules.     

Hyperbranched polycarbosiloxane with dendritic boron cores: Synthesis,characterization, and structure regulation

The synthesis, characterization, and structure regulation of hyperbranched polycarbosiloxane with dendritic boron cores were realized in this paper. First, dendritic boron core was synthesized via hydroboration with borane dimethylsulfide and bis(allyloxy)dimethylsilane. Then, the hyperbranched polycarbosiloxanes with dendritic boron cores were synthesized via hydrosilylation with AB₂ type monomer of bis(allyloxy)methylsilane and dendritic boron cores. The molecular structures of the dendritic boron core and resulting hyperbranched polymers were characterized by using Fourier transform infrared spectroscopy, ¹H nuclear magnetic resonance, and ¹³C nuclear magnetic resonance spectroscopies. Size exclusion chromatography/multiangle laser light scattering analysis reveals that the structures of hyperbranched polycarbosiloxane can be regulated effectively by incorporation of functional dendritic boron cores. Compared with hyperbranched polycarbosiloxane of the same molecular weight level, the hyperbranched polycarbosiloxane with dendritic boron cores presents narrower molecular weight distribution as well as much smaller hydrodynamic radius and intrinsic viscosity. Thermalgravimetric analyzer analysis indicates that both the decomposition temperature and ceramic yields are increased as the results of the incorporation of dendritic boron cores into hyperbranched polycarbosiloxane. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3930–3941, 2006     

Hydrogen‐Bonding Interactions and Properties of Energetic Nitroamino[1,3,5]triazine‐Based Guanidinium Salts: DFT‐D and QTAIM Studies

The intramolecular hydrogen‐bonding interactions and properties of a series of nitroamino[1,3,5]triazine‐based guanidinium salts were studied by using the dispersion‐corrected density functional theory method (DFT‐D). Results show that there are evident LP(N or O; LP=lone pair)→σ*(N? H) orbital interactions related to O???H? N or N???H? N hydrogen bonds. Quantum theory of atoms in molecules (QTAIM) was applied to characterize the intramolecular hydrogen bonds. For the guanidinium salts studied, the intramolecular hydrogen bonds are associated with a seven‐ or eight‐membered pseudo‐ring. The guanylurea cation is more helpful for improving the thermal stabilities of the ionic salts than other guanidinium cations. The contributions of different substituents on the triazine ring to the thermal stability increase in the order of ? NO₂23 (? ONO₂)2. Energy decomposition analysis shows that the salts are stable owing to electrostatic and orbital interactions between the ions, whereas the dispersion energy has very small contributions. Moreover, the salts exhibit relatively high densities in the range of 1.62–1.89 g cm^?3. The detonation velocities and pressures lie in the range of 6.49–8.85 km s^?1 and 17.79–35.59 GPa, respectively, which makes most of them promising explosives.     

Thermal study of zinc(II) salicylate complex compounds with bioactive ligands

Five new complex compounds of general formula Zn(Hsal)_2·L₂·nH₂O (where Hsal=OHC₆H₄COO^-, L=thiourea (tu), nicotinamide (nam), caffeine (caf), theobromine (tbr), n=2-4), were prepared and characterized by chemical analysis, IR spectroscopy and studied by methods of thermal analysis (TG/DTG, DTA). It was found that the thermal decomposition of hydrated compounds starts with the release of water molecules. During the thermal decomposition of anhydrous compounds the release of organic ligands take place followed by the decomposition of salicylate anion. Zinc oxide was found as the final product of the thermal decomposition heated up to 800°C. RTG powder diffraction method, IR spectra and chemical analysis were used for the determination of products of the thermal decomposition. This revised version was published online in August 2006 with corrections to the Cover Date.     

Synthesis,Crystal Structure,and Characterization of a Novel Metallo‐Organically‐Templated Pentaborate with Mixed Ligands

A novel metallo‐organically templated pentaborate with layered framework, [Cd(TETA)(C₂H₃O₂)][B₅O₆(OH)₄] ( 1 ) (TETA = triethylenetramine), was synthesized under mild solvothermal conditions. The structure was determined by single‐crystal X‐ray diffraction and further characterized by FT‐IR spectroscopy, elemental analysis, thermogravimetric analysis, and photoluminescence spectroscopy. The structure consists of an isolated polyborate anion [B₅O₆(OH)₄]^– and the cadmium complex cation of [Cd(TETA)(C₂H₃O₂)]⁺, which contains both organic amine and organic acid ligands. The [B₅O₆(OH)₄]^– units are connected together by hydrogen bonds, and a 2D sheet‐like framework with rectangle‐like 12‐membered boron rings are formed. The [Cd(TETA)(C₂H₃O₂)]⁺ complex cations are located in the free space between the layers and connect the adjacent borate layers through hydrogen bonds to form a three‐dimensional supramolecular network. The luminescent properties of the compound were studied for the first time in the series of metallo‐organically‐templated pentaborates, and a blue luminescence occurs with an emission maximum at 468 nm upon excitation at 397 nm.     

Determination of Boron with Isotope Dilution Method

100 ng or less amount of boron in the form of Na₂B₄O₇ was loaded on tantalum filament of thermal ionization mass spectrometer. A serial isotope ratios of metaborate, Me=88 (Na₂ ¹¹BO₂) and Me=89 (Na₂ ¹¹BO₂) prepared with spike (¹⁰B enriched) and nature boron were determined successfully and compared with reference values.     

Thermogravimetric analysis of the copper silicate mineral dioptase Cu6[Si6O18]·6H2O

There have been a few studies on the thermal decomposition of dioptase Cu₆[Si₆O₁₈]·6H₂O. The results of these analyses are somewhat conflicting and the conclusions vary among these thermo-analytical studies. The objective of this research is to report the thermal analysis of dioptase from different origins and to show the mechanism of decomposition. Thermal decomposition occurs over a very wide temperature range from around 400 to 730 °C with the loss of water. Two additional mass loss steps are observed at around 793 and 835 °C with loss of oxygen. The infrared spectra of dioptase in the hydroxyl stretching region enables the hydrogen bond distances of water molecules in the dioptase structure to be calculated. The large variation in the hydrogen bond distances offers an explanation as to why the decomposition of dioptase with loss of water occurs over such a wide temperature range.     

Investigation of the Preyssler phosphotungstate heteropolyanion, [NaP5W30O110]14−, properties with different counter ions

Preyssler heteropolytungstophosphate anions with different counter ions, X _x M _y [NaP₅W₃₀O₁₁₀], where X = H and M = Cs, Ba, La, Ce, Hg, Tl, Pb and Bi, were prepared and the effect of the counter ion on their behavior was investigated by i.r. spectroscopy, surface area measurements (BET), simultaneous thermal analysis (STA), cyclic voltammetry and X-ray photoelectron spectroscopy (XPS). Thermal analyses indicate that the Ce derivative has the highest and the Hg derivative the lowest thermal stability. Only the Cs, Ba and Tl salts show measurable surface area. All heteropolyanions with similar i.r. spectra and electrochemical behavior demonstrate that the heteropolyanion structures are retained. The X-ray photoelectron spectra of the heteropolyacid salts reveal high binding energies for counter ions in comparison with classic salts and strong interaction of counter ion with the oxo oxygen's for H⁺ and Cs⁺ derivatives.     

Study of the state of nickel in ion-exchanged NiNaY zeolite by IR spectroscopy using molecular hydrogen adsorbed at low temperatures

The state of nickel cations in NiNaY zeolite subjected to thermal vacuum and oxidative-reductive treatment was analyzed using diffuse reflectance IR spectra of molecular hydrogen, CO, and hydroxy groups. In a sample dehydrated at 570 K, nickel forms oxide particles, which are presumably located in big cavities of a zeolite. Heating of the sample at 670 K results in decomposition of the oxide with the participation of hydroxy groups followed by the formation of stabilized Ni²⁺ cations in large cavities of the zeolite. Calcination of NiNaY zeolite in a hydrogen atmosphere at 730 K leads to Ni²⁺ cation reduction to the metal state and to the formation of acidic hydroxy groups. Nevertheless, Ni²⁺ cations can be regenerated by reoxidation of the reduced sample with oxygen at 670 K and further evacuation at 870 K. Thermal destruction of NiO in the reoxidized sample also proceeds on acidic hydroxy groups, but the temperature of this process is higher than the temperature of oxide decomposition in the initial NiNaY zeolite. The IR spectra of molecular hydrogen complexes with Ni²⁺ cations were observed for the first time. A considerable decrease in the H-H stretching vibration frequency for the coordinated molecules (up to 210 cm’1) can be explained by electron density redistribution between a hydrogen molecule and the cation in the complex     

Studies on kinetics and mechanism of initial thermal decomposition of nitrocellulose

The thermal decomposition of nitrocellulose (NC) 12.1% N, has been studied with regard to kinetics, mechanism, morphology and the gaseous products thereof, using thermogravimetry (TG), differential thermal analysis (DTA), IR spectroscopy, differential scanning calorimetry (DSC) and hot stage microscopy. The kinetics of the initial stage of thermolysis ofNC in condensed state has been investigated by isothermal high temperature infrared spectroscopy (IR). The decomposition ofNC in KBr matrix in the temperature range of 142–151°C shows rapid decrease in O?NO₂ band intensity, suggesting that the decomposition of NC occurs by the rupture of O?NO₂ bond. The energy of activation for this process has been determined with the help of Avrami-Erofe'ev equation (n=1) and is ≈188.35 kJ·mol^?1. Further, the IR spectra of the decomposition products in the initial stage of thermal decomposition ofNC, indicates the presence of mainly NO₂ gas and aldehyde.     

Vibrational spectra and factor group analysis of rare-earth chromium borates,RCr3(BO3)4, with R = La–Ho

Anhydrous orthoborates RM₃(BO₃)₄, where R = Y, La–Lu, M = Al, Ga, Cr, Fe, with huntite structure type are considered as multifunctional laser materials. The crystal structure of these borates is either rhombohedral with space group R32 (D₃⁷) (Z = 3) or monoclinic with space group C2/c (C_2h⁶) (Z = 4) depending on the growth conditions. Both modifications have very close polytypic structures, and it is difficult to identify them by powder diffraction data. In this context, double borates of rare-earth cations and Cr³⁺ have been grown from high-temperature solutions and are characterized by Raman and infrared spectroscopy in a crystalline state in combination with factor group analysis of vibrational modes. The assignment for the stretching and bending vibrations of BO₃³⁻ groups and external modes has been made. Some external modes have been identified by study of mass effect (Al–Cr, La–Ho). Comparison of the Raman spectra of these borates shows redistribution of band intensities of two spectral modifications, related to different symmetry groups. As predicted by factor group analysis, the number of IR-active vibrational modes of stretching and bending vibrations of BO₃³⁻ units significantly increases in infrared spectra of monoclinic borates in comparison with rhombohedral ones. The dependence of the realized borate space group on the crystal growth conditions and the sort of rare-earth atom was revealed. Both GdCr₃(BO₃)₄ and EuCr₃(BO₃)₄ borates crystallize in space group R32 irrespective of growth conditions. The borates with the large rare-earth elements La–Nd always form the monoclinic structures, irrespective of crystallization temperature. The borates SmCr₃(BO₃)₄, TbCr₃(BO₃)₄ and DyCr₃(BO₃)₄ have been obtained in two modifications in dependence of crystalline borate substance/solvent ratio and related temperature of crystallization.     

Infrared,Raman and XPS spectroscopic studies of Bi2O3–B2O3–Ga2O3 glasses

Glasses with compositions 60Bi₂O₃–(40?x)B₂O₃–xGa₂O₃ (x = 5, 10, 15, 20 mol%) are prepared by conventional melting method. The thermal properties are investigated by differential thermal analysis (DTA) and the structures of the glasses were probed by Infrared, Raman and X-ray photoelectron spectroscopy (XPS). The results show that density, refractive index and optical basicity increase with the increase of Ga₂O₃. The glass transition temperature (T_g), the onset crystallization temperature (T_x), ΔT (T_x?T_g) decrease with the content of Ga₂O₃. The cut-off edges in ultraviolet and infrared shift to longer wavelength with the increase of Ga₂O₃. On the other hand, the addition of Ga₂O₃ causes a progressive coordination number change of the boron atom from 3 to 4. XPS result indicates both Bi⁵⁺ and Bi³⁺ exist in 5 mol% Ga₂O₃ content, while Bi⁵⁺ amounts decrease with the increase of Ga₂O₃ contents. The glass is mainly composed of [BiO₆], [BO₃], [BO₄] and [GaO₄] polyhedra. Glasses are supposed to have layer structure. [BO₃] triangle and [BO₄] tetrahedra may be located between the [GaO₄] tetrahedral and [BiO₆] octahedra to prevent crystallization and to compensate electric charge.