二氧化硅负载硅钨钼酸催化合成环己酮1,2-丙二醇缩酮

采用溶胶-凝胶法制备了二氧化硅负载硅钨钼酸催化剂。以二氧化硅负载硅钨钼酸为催化剂,环己酮和1,2-丙二醇为原料合成了环己酮1,2-丙二醇缩酮,用正交实验法研究了反应物料配比、催化剂用量、带水剂用量、反应时间等因素对反应的影响。结果表明,在n(环己酮)∶n(1,2-丙二醇)=1∶1.4,催化剂用量为反应物料总质量的0.8%,带水剂环己烷12 mL,反应时间45 min的优化条件下,环己酮1,2-丙二醇缩酮的收率可达84.93%。     

磷钨酸铜绿色催化合成缩醛(酮)及其催化活性测定

合成了绿色杂多酸盐催化剂磷钨酸铜;将环己酮、苯甲醛同乙二醇、1,2-丙二醇的缩合反应作为探针反应,测定了催化剂的催化活性,比较系统地考察了催化剂用量、物料配比、反应时间、带水剂用量等因素对反应产率的影响.结果表明:在底物醛(酮)用量0.2 mol、醛(酮)/乙二醇(1,2-丙二醇)摩尔比1.0/1.5、催化剂用量0.5 g、带水剂环己烷用量18 mL、一定温度下回流反应2.0 h,1,4-二氧螺[4,5]癸烷产率为83.3%,3-甲基-1,4-二氧螺[4,5]癸烷产率为89.7%,2-苯基-1,3-二氧环戊烷产率为66.7%,4-甲基-2-苯基-1,3-二氧环戊烷产率为78.5%.     

碘掺杂聚苯胺催化合成环己酮1,2-丙二醇缩酮

合成了聚苯胺-碘(PAn-I2)催化剂,并对其结构进行了表征。并通过环己酮与1,2-丙二醇合成环己酮1,2-丙二醇缩酮,探讨了PAn-I2对缩酮反应的催化活性。实验结果表明,PAn-I2是缩酮反应的良好催化剂,在环己酮100 mmol,n(环己酮)∶n(1,2-丙二醇)=1∶1.5,催化剂用量为反应物总质量的3%,环己烷12 mL,反应时间2 h的优化条件下,环己酮1,2-丙二醇缩酮的收率可达92.1%。     

硅钨酸催化合成苯甲醛1,2-丙二醇缩醛

以硅钨酸为催化剂,通过苯甲醛和1,2-丙二醇反应合成了苯甲醛1,2-丙二醇缩醛。实验结果表明,硅钨酸对缩醛反应具有较高的催化活性,反应的最佳条件为：苯甲醛150mmol,n(苯甲醛)：n(1,2-丙二醇)：1.0：1.5,催化剂0.7％(反应物料总质量),带水剂环己烷8mL,反应温度85℃～125℃,反应时间1．0h,收率达88．9％．     

硅钨酸掺杂的聚苯胺：实物模板法制备及催化性能

以不同形态的实物为模板,硅钨酸为掺杂剂,过硫酸铵为氧化剂合成了不同微观形貌掺杂态聚苯胺,并用红外光谱、气相色-质联用仪及扫描电镜对其进行了表征。考察了所制备的聚苯胺催化合成环己酮1,2-丙二醇缩酮的性能,探讨了不同微观形貌掺杂态聚苯胺催化剂对缩酮反应的催化活性,研究了催化剂用量、反应时间等因素对产品收率的影响,以及不同沸程的产物。结果表明:硅钨酸掺杂聚苯胺是合成环己酮1,2-丙二醇缩酮的良好催化剂,其中微观结构为球状的聚苯胺催化性能最佳。在n环己酮∶n1,2-丙二醇=1∶1.4,催化剂用量为反应物总质量的1.6%,反应时间为40 min的最佳条件下,环己酮1,2-丙二醇缩酮的收率为89.2%。     

固体超强酸催化剂SO2-4/TiO2-WO3的制备及其催化性能研究

制备了固体超强酸催化剂SO2-4/TiO2-WO3,并以丁酸丁酯的合成作为探针反应,系统考察了WO3的含量、硫酸浸渍浓度、焙烧温度等制备条件对SO2-4/TiO2-WO3催化活性的影响.实验表明:制备催化剂的适宜条件为m(H2WO4)=12.5%,硫酸浸渍浓度为1.0 mol·L-1,焙烧温度为580℃,活化时间3 h.利用优化条件下制备的催化剂SO2-4/TiO2-WO3催化合成缩醛(酮),在醛/酮与二元醇(乙二醇,1,2-丙二醇)的投料摩尔比为1:1.5,催化剂的用量占反应物总投料质量的0.5%,反应时间为l h条件下,2-甲基-2-乙氧羰甲基-1,3-二氧环戊烷的收率为78.7%,2,4-二甲基-2-乙氧羰甲基-1,3-二氧环戊烷的收率为83.0%,环己酮-乙二醇缩酮的收率为85.9%,环己酮-1,2-丙二醇缩酮的收率为84.6%,丁酮-乙二醇缩酮的收率为70.7%,丁酮-1,2-丙二醇缩酮的收率为88.3%,2-丙基-1,3-二氧环戊烷的收率为80.6%,4-甲基-2-丙基-1,3-二氧环戊烷的收率为79.6%,2-异丙基-1,3-二氧环戊烷的收率为64.2%,4-甲基-2-异丙基-1,3-二氧环戊烷的收率为83.3%,2-苯基-l,3-二氧环戊烷的收率为75.3%,4-甲基-2-苯基-1,3-二氧环戊烷的收率为95.1%.     

固体超强酸催化剂SO_4~(2-)/TiO_2-WO_3的制备及其催化性能研究

制备了固体超强酸催化剂SO2 -4/TiO2 WO3 ,并以丁酸丁酯的合成作为探针反应 ,系统考察了WO3 的含量、硫酸浸渍浓度、焙烧温度等制备条件对SO2 -4/TiO2 WO3 催化活性的影响 .实验表明 :制备催化剂的适宜条件为m(H2 WO4) =12 5 % ,硫酸浸渍浓度为 1 0mol·L-1,焙烧温度为 5 80℃ ,活化时间 3h .利用优化条件下制备的催化剂SO2 -4/TiO2 WO3 催化合成缩醛 (酮 ) ,在醛 /酮与二元醇 (乙二醇 ,1,2 丙二醇 )的投料摩尔比为 1∶1 5 ,催化剂的用量占反应物总投料质量的 0 5 % ,反应时间为 1h条件下 ,2 甲基 2 乙氧羰甲基 1,3 二氧环戊烷的收率为 78 7% ,2 ,4 二甲基 2 乙氧羰甲基 1,3 二氧环戊烷的收率为 83 0 % ,环己酮 -乙二醇缩酮的收率为 85 9% ,环己酮 1,2 丙二醇缩酮的收率为 84 6% ,丁酮 -乙二醇缩酮的收率为70 7% ,丁酮 1,2 丙二醇缩酮的收率为 88 3 % ,2 丙基 1,3 二氧环戊烷的收率为 80 6% ,4 甲基 2 丙基 1,3 二氧环戊烷的收率为 79 6% ,2 异丙基 1,3 二氧环戊烷的收率为 64 2 % ,4 甲基 2 异丙基 1,3 二氧环戊烷的收率为 83 3 % ,2 苯基 1,3 二氧环戊烷的收率为 75 3 % ,4 甲基 2 苯基 1,3 二氧环戊烷的收率为 95 1% .     

钨硅酸的制备及其在催化合成缩酮(醛)中的应用

本文探讨了钨硅酸的制备方法,以合成环己酮1,2-内二醇缩酮为例验证钨硅酸的催化活性,并探讨了合成其它缩酮（醛）的适宜条件,得到的收率分别为：环己酮1,2-丙二醇缩酮85．5％、环己酮乙二醇缩酮89．6％、丁酮乙二醇缩酮79．5％、丁醛乙二醇缩醛89．1％、丁醛1,2丙二醇缩醛81．5％。     

介孔分子筛MCM-41负载磷钨酸催化合成香兰素1,2-丙二醇缩醛

以香兰素和1,2-丙二醇为原料,以介孔分子筛MCM-41负载磷钨酸为催化剂,环己烷为带水剂,合成了香兰素1,2-丙二醇缩醛.考察了醛醇物质的量比、反应时间、带水剂用量、催化剂用量及负载量对产率的影响.实验表明,介孔分子筛MCM-41负载磷钨酸是合成香兰素1,2-丙二醇缩醛的理想催化剂,较优反应条件为:n(香兰素)∶n(1,2-丙二醇)=1∶2.4,负载量为50%,催化剂用量为反应物总质量的2.0%,带水剂环己烷15mL,回流反应2.0h,香兰素1,2-丙二醇缩醛的收率达92%以上.     

钛基固体超强酸对环己酮乙二醇缩酮催化反应的特性

合成S042-/TiO2、SO42-/TiO2-Ce(Ⅳ)、SO42-/TiO2-ZrO2三种不同的固体超强酸,以环己酮乙二醇缩酮为探针反应,发现550℃下焙烧的SO4 2-/TiO2-Ce(Ⅳ)催化活性最好.并以SO42-/TiO2-Ce(Ⅳ)为催化剂,考察反应温度、催化剂用量、反应时间、反应物配比和带水剂对缩酮化反应转化率和选择性的影响.结果表明,反应温度为110～125℃、催化剂用量占反应物料总质量的0.5%、环己酮和乙二醇物质的量比为1:1.5、反应时间为1 h、环己烷为带水剂时,环己酮的转化率达95.2%,环己酮乙二醇缩酮的选择性98.7%,催化剂的重复使用效果好.     

Darstellung,Kristallstrukturen, Schwingungsspektren und Normalkoordinatenanalyse von vier bindungsisomeren Trichlorotrirhodanoosmaten(IV)

Preparation, Crystal Structures, Vibrational Spectra, and Normal Coordinate Analysis of four Linkage Isomeric Trichlorotrirhodanoosmates(IV) By treatment of fac-[OsCl₃I₃]^2? with (SCN)₂ in dichloromethane the linkage isomers fac-[OsCl₃(NCS)₃]^2? ( 1 ), mer-[OsCl₃(NCS)₂^c(SCN)]^2? ( 2 ), mer-[OsCl₃(NCS)(SCN)₂^t]^2? ( 3 ), and mer-[OsCl₃(NCS)(SCN)₂^c]^2? ( 4 ) are formed which have been separated by ion exchange chromatography on diethylaminoethyl cellulose. X-Ray structure determinations have been performed on single crystals of fac-(Ph₄As)₂[OsCl₃(NCS)₃] (triclinic, space group P1 , a = 12.142(5), b = 13.233(5), c = 19.300(5) Å, α = 98.642(5)º, β = 100.509(5)º, γ = 112.514(5)º, Z = 2), mer-(Ph₄As)₂[OsCl₃(NCS)₂^c (SCN)] · acetone (triclinic, space group P1 , a = 11.707(5), b = 13.238(5), c = 19.048(5) Å, α = 75.960(5)º, β = 88.981(5)º, γ = 69.999(5)º, Z = 2), mer-(Ph₄As)₂[OsCl₃(NCS)(SCN)₂ ^t] (triclinic, space group P1, a = 10.6861(12), b = 11.6587(5), c = 12.5232(5) Å, α = 112.069(8)º, β = 95.052(8)º, γ = 92.559(7)º, Z = 1) and mer-(Ph₄As)₂[OsCl₃(NCS)(SCN)₂ ^c] · 2acetone (triclinic, space group P1 , a = 11.444(5), b = 14.661(5), c = 15.830(5) Å, α = 75.790(5)º, β = 80.273(5)º, γ = 75.205(5)º, Z = 2). The complex anions are completely ordered. The via N or S coordinated thiocyanate groups are located nearly direct above one of the cis-positioned Cl ligands with Os? N? C angles of 169.1º, 171.5º, 175.7º ( 1 ), 175.6º, 178.6º ( 2 ), 172º ( 3 ), and 173.1º ( 4 ) and Os? S? C angles of 106.2º ( 2 ), 106.1º, 106.6º ( 3 ), 105.1º, and 108.2º ( 4 ). Using the molecular parameters of the X-Ray determinations the low temperature (10 K) IR and Raman spectra of the (n-Bu₄N) salts of all four linkage isomers have been assigned by normal coordinate analyses based on a modified valence force field. The valence force constants are f_d(OsN) = 1.71 ( 1 ), 1.46 and 1.62 ( 2 ), 1.69 ( 3 ), and 1.61 ( 4 ), f_d(OsS) = 1.27 ( 2 ), 1.36 ( 3 ), 1.32, and 1.49 mdyn/Å ( 4 ). Taking into account increments of the trans influence a good agreement between observed and calculated frequencies is achieved.     

Darstellung,Kristallstrukturen, Schwingungsspektren und Normalkoordinatenanalyse von vier bindungsisomeren Tetrachlorodirhodanoosmaten(IV)

Preparation, Crystal Structures, Vibrational Spectra, and Normal Coordinate Analysis of Four Linkage Isomeric Tetrachlorodirhodanoosmates(IV) By treatment of cis- or trans-[OsCl₄I₂]^2? with (SCN)₂ in dichloromethane the linkage isomers cis-[OsCl₄(NCS)₂]^2? ( 1 ), trans-[OsCl₄(NCS)(SCN)]^2? ( 2 ), cis-[OsCl₄(NCS)(SCN)]^2? ( 3 ) and trans-[OsCl₄(SCN)₂]^2? ( 4 ) are formed which have been separated by ion exchange chromatography on diethylaminoethyl cellulose. The X-Ray structure determinations on single crystals of cis-(Ph₄As)₂[OsCl₄(NCS)₂] (triclinic, space group P1 , a = 10.019(5), b = 11.702(5), c = 21.922(5) Å, α = 83.602(5)°, β = 85.718(5)°, γ = 73.300(5)°, Z = 2), trans-(Ph₄As)₂[OsCl₄ · (NCS)(SCN)] (monoclinic, space group P2₁/c, a = 18.025(5), b = 11.445(5), c = 23.437(5) Å, β = 94.208(5)°, Z = 4), cis-(Ph₄As)₂[OsCl₄(NCS)(SCN)] (triclinic, space group P1 , a = 10.579(5), b = 11.682(5), c = 22.557(5) Å, α = 81.073(5)°, β = 85.807(5)°, γ = 87.677(5)°, Z = 2) and trans-(Ph₄As)₂ · [OsCl₄(SCN)₂] (triclinic, space group P1 , a = 10.615(5), b = 11.691(5), c = 11.907(5) Å, α = 111.314(5)°, β = 96.718(5)°, γ = 91.446(5)°, Z = 1) reveal the complete ordering of the complex anions. The via N or S coordinated thiocyanate groups are located nearly direct above one of the cis-positioned Cl ligands with Os? N? C angles of 171.2° and 174.3° ( 1 ), 162.3° ( 2 ), 172° ( 3 ) and Os? S? C angles of 108.3° ( 2 ), 105.7° ( 3 ) and 105.5° ( 4 ). Using the molecular parameters of the X-Ray determinations the low temperature (10 K) IR and Raman spectra of the (n-Bu₄N) salts of all four linkage isomers are assigned by normal coordinate analyses based on a modified valence force field. The valence force constants are f_d(OsN) = 1.59 ( 1 ), 1.67 ( 2 ), 1.60 ( 3 ) and f_d(OsS) = 1.27 ( 2 ), 1.31 ( 3 ) and 1.32 mdyn Å^?1 ( 4 ). Taking into account increments of the trans influence a good agreement between observed and calculated frequencies is achieved.     

Darstellung und Kristallstruktur von (n-Bu4N)3[Ir(NCS)(SCN)5]

Preparation and Crystal Structure of (n-Bu₄N)₃[Ir(NCS)(SCN)₅] The evaporated ethanolic extrakt of the reaction product of K₃[IrCl₆] and HNO₃, refluxed with an aqueous KSCN solution yields a mixture of the linkage isomers [Ir(NCS)_n(SCN)_6?-n]^3?, n = 0? 2, and small amounts of linkage isomeric chloropentarhodanoiridates(III), from which [Ir(NCS)(SCN)₅]^3? has been isolated by ion exchange chromatography on DEAE-cellulose. The X-Ray structure determination on a single crystal of (n-Bu₄N)₃[Ir(NCS)(SCN)₅] (monoclinic, space group P 2₁/a, a = 17.513(5), b = 32.607(5), c = 23.661(5) Å, β = 94.757(5)°, Z = 8) confirms the existance of a heteroleptic hexakis(thiocyanato(N)-thiocyanato(S))iridate(III) with an Ir? N distance of 2.03 Å and Ir? S bond lengths between 2.29 and 2.38 Å. The SCN groups with angles between 166 and 175° are nearly linear with Ir? S? C angles from 99.9 to 109.4°. The Ir? N? C angles of the two crystallographic independent anions are 166 and 174°.     

Comparative Thermogravimetric Studies of Poly(ether-ketone/sulfone) Imides and Their Parent Polymers: I. Poly(ether-ketone/sulfone) ethylimide

Thermogravimetry (TG) was employed to study the thermal degradation kinetics of poly(etherketone/sulfone)ethylimide (PEK-IE and PES-IE). The corresponding decomposition activation energies and reaction orders were obtained and the comparison was made with their parent polymerspoly(ether-ketone/sulfone) with Cardo group (PEK-C and PES-C). The results show that the degradation activation energies of PEK-IE and PES-IE were lower than that of PEK-C and PES-C; and two stages of the degradation process were found for all the four polymers. For PEK-IE and PES-IE, the activation energies in the first decomposition stage are much lower than that in the second stage and the two stages can be taken as slow induction and fast degradation, whereas for PEK-C and PES-C the activation energies in the first decomposition stage are larger than that in the second stage, and the two stages can both be taken as two fast degradation stages. The decomposition mechanism of the two stages was also speculated.This revised version was published online in November 2005 with corrections to the Cover Date.     

SYNTHESIS AND CHARACTERIZATION OF METAL COMPLEXES WITH AMPICILLIN

Abstract

The reaction, in water, of Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) ions with sodium ampicillinate at room temperature has allowed isolation of dimers with the following general formula [M(amp)Cl]₂ × nH₂O (n = 1.5?3.2). The complexes were characterized by elemental analyses, conductivity measurements, magnetic susceptibilities and spectroscopic methods (IR, Raman, EPR and UV-Visible). A dinuclear structure based on octahedrally coordinated metal ions is proposed.     

PMDA-BPDA-HAB聚苯并噁唑的合成及耐热性

PMDA-BPDA-HAB聚苯并噁唑的合成及耐热性;均苯四甲酸二酐;联苯四羧酸二酐;二羟基联苯胺;聚酰亚胺;聚苯并噁唑;耐热性     

Thermal Degradation of Poly(ε-caprolactone), Poly(L-lactic acid) and their Blends with Poly(3-hydroxy-butyrate) Studied by TGA/FT-IR Spectroscopy

Summary: The thermal degradation behavior of poly(ε-caprolactone) (PCL) and poly(L-lactic acid) (PLA) have been studied in different environment. It was found that these polymers undergo completely different degradation processes in nitrogen and oxygen atmosphere. In oxygen environment PCL and PLA mainly decompose to CO₂, CO, water and short-chain acids. In nitrogen atmosphere PCL releases 5-hexenioc acid, CO₂, CO and ε-caprolactone, whereas PLA decomposes to acetaldehyde, CO₂, CO and lactide. The polymer blends of poly(3-hydroxybutyrate) (PHB) with PCL and PLA decompose similar to the individual homopolymers with crotonic acid as the initial decomposition product of PHB.     

Energy relationship and the polarization of C_(60) cage in the endohedral complexes (X@C_(60))

In this paper, we carry out the calculation on the system (X@C60)(X=Li, Na, K, Kb, Cs; F, Cl, Br, I), where the position of X changes along 5 typical symmetry directions. For the calculation of quantum chemistry we use EHMO/ASED method, for the calculation of molecular mechanics we use Buckingham potential (exp-6-1) function, and for the calculation of thermo-chemical cycle we use individually isolating the processes such as the structure variation, charge transfer and charge distribution, and their interactions etc. The calculation results show that (1) In the region of radius r≈0.2 nm of the Ceo cage, the potential field is nearly spherical; (2) Except for Li and Na, the systems are the most stable with minimum energies at the center of C60 cage. For Li and Na, the systems are the most stable with minimum energies at r≈0.16 nm and r≈0.13 nm, respectively. In view of the interactive region of chemical bonds, the interactions between X and the C60 cage do not belong to the classical chemical bonds; (     

铜在3%NaCl溶液中腐蚀行为的光电化学研究

Cu以其优异的导电性、导热性和易加工性广泛用于工农业生产中．自然Cu的腐蚀和防腐成为人们很关注的问题．人们已经注意到，Cl-对Cu的腐蚀有影响，并进行过一些研究．但目前使用光电化学方法研究这一问题的文章尚不多见，特别是利用测量开路光电压及其瞬态波形这一现场的、无损的、灵敏的监测方法研究户对Cu电极腐蚀全过程的文章尚未见到．本文正是利用如上方法及XPS，AES方法，研究了Cl-对Cu电极腐蚀的全过程，取得了一些有意义的结果．1实验方法Cu电极用99．99％（质量分数）的Cu制成，面积约为39mm2；电极底部由Cu导线焊接引出，…     

On the morphological behavior of ABC miktoarm stars containing poly(cis 1,4-isoprene), poly(styrene), and poly(2-vinylpyridine)

Fundamental understanding of microphase separation in ABC miktoarm copolymers is vital to access a plethora of nonconventional morphologies. Miktoarm stars based on poly(cis 1,4-isoprene) (I), poly(styrene) (S), and poly(2-vinylpyridine) (V) are model systems, which allow systematic studies of the effects of composition, chemical microstructure, and temperature on the thermodynamics of microphase separation. Eleven ISV-x (I:S:V = 1:1:x, v:v:v) miktoarm copolymers were synthesized by anionic polymerization affording well-defined copolymers with a variable V arm. Equilibrium bulk morphologies of all samples, as evidenced by small-angle X-ray scattering, transmission electron microscopy (TEM), and self-consistent field theory, showed a systematic transition from lamellae (x ≈ 0–0.2) to [8.8.4] tiling (x ≈ 0.6–0.9) to cylinders in undulating lamellae (x ≈ 2–4) and, finally, to hexagonally packed core–shell cylinders (x ≈ 5–8). Chemical microstructure of the I arm [poly(cis 1,4-isoprene)] versus poly(3,4-isoprene) is shown to play important role in affecting morphological behavior. To reconcile differences between ISV-x star morphologies reported in the literature and those reported herein, even for the same composition, effects of the microstructure of I arm on the Flory–Huggins parameter between I and V arms were taken into account in a qualitative manner. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1491–1504