支链化阳离子和甜菜碱表面活性剂对聚四氟乙烯表面润湿性的影响

利用座滴法研究了支链化阳离子表面活性剂十六烷基羟丙基氯化铵(C₁₆GPC)和两性离子表面活性剂十六烷基羧酸甜菜碱(C₁₆GPB)在聚四氟乙烯(PTFE)表面上的吸附机制和润湿性质, 考察了表面活性剂浓度对表面张力、接触角、粘附张力、固液界面张力和粘附功的影响趋势. 研究发现, 低浓度条件下, 表面活性剂疏水支链的多个亚甲基基团与PTFE表面发生相互作用, 分子以平躺的方式吸附到固体界面; 支链化表面活性剂形成胶束的阻碍较大, 浓度大于临界胶束浓度(cmc)时, C₁₆GPC和C₁₆GPB分子在固液界面上继续吸附, 与PTFE作用的亚甲基基团减少, 分子逐渐直立, 固液界面自由能(γ_sl)明显降低. 对于支链化的阳离子和甜菜碱分子, 接触角均在浓度高于cmc后大幅度降低.     

非离子表面活性剂Triton X-100溶液在不同生长期小麦叶片表面的润湿行为

选择不同生长期小麦叶片,利用座滴法研究了非离子表面活性剂Triton X-100在小麦叶片表面接触角,考察浓度对接触角、粘附张力、固-液界面张力及润湿状态的影响。研究表明,在低浓度下,表面活性剂分子在气-液界面吸附量(ΓLV)和固-液界面吸附量(Γ'SL)相似,但吸附量较少形成了不饱和吸附层,接触角保持不变,其润湿状态为Cassie-Baxter状态;当浓度进一步增加,液滴突破叶片表面三维立体结构中存在的钉扎效应,取代空气层而处于Wenzel状态,接触角陡降,同时Γ'SL/ΓLV远大于1;当浓度超过临界胶束浓度(CMC)时,表面活性剂分子在气-液界面和固-液界面形成饱和吸附层,并产生毛细管效应,使溶液在小麦叶片三维立体结构中产生半渗透过程,此时接触角保持不变。     

苄基取代甜菜碱对聚四氟乙烯表面润湿性的影响

利用座滴法研究了两性离子表面活性剂苄基取代烷基羧基甜菜碱(BCB)和苄基取代烷基磺基甜菜碱(BSB)在聚四氟乙烯(PTFE)表面上的润湿性质,考察了表面活性剂浓度对接触角的影响趋势,并讨论了粘附张力、固-液界面张力和粘附功的变化规律.研究发现,在低浓度时,表面活性剂通过疏水作用吸附到PTFE表面,疏水链苄基取代支链化使其在固-液界面上的吸附明显低于气-液界面,接触角在很大的范围内保持不变.当体相浓度增加到大于临界胶束浓度(cmc)时, BCB和BSB分子在固-液界面上继续吸附,分子逐渐直立,造成PTFE-液体之间的界面张力(γ_SL)进一步降低,表面亲水性增加,接触角随浓度增加明显降低;另一方面, BSB由于具有较大的极性头,在高浓度时空间阻碍作用明显,导致其对PTFE表面润湿性改变程度小于BCB.     

固/液界面现场光谱电化学

固/液界面现场光谱电化学的方法包括各种电磁波透射和反射谱(紫外可见、拉曼、红外、X-光等)、磁共振谱(ESR、NMR)以及80年代发展起来的扫描显微谱(STM等)和非线性反射光谱(SHG)等等。固/液界面现场光谱电化学已渗透到固/液界面和电极表面结构,分子水平上的吸脱附和反应机理,电催化和反应动力学等许多研究领域。本文结合文献对上述几个方面以及固/液界面现场光谱电化学的发展方向进行综述。     

偶联表面活性剂在气/液界面上的区域形貌

测定了偶联表面活性剂propilidene-1,3-bis(dimethyloctadecylammonium bromide) (PBDOAB)在0.005 mol•L－1 NaBr溶液气/液界面上的分子面积和表面压－分子面积等温线.用自制的Brewster角显微镜观察了PBDOAB在该溶液的气/液界面上的区域结构.结果表明, PBDOAB在0.005 mol•L－1 NaBr溶液的气/液界面上生成了凝聚态的单分子膜；观察到在界面上形成了环形的区域结构;在环形结构内的分子取向呈中心对称.     

十二烷基苯磺酸钠在SiO2表面聚集的分子动力学模拟

采用分子动力学方法研究了阴离子表面活性剂十二烷基苯磺酸钠(SDBS)在无定形SiO2固体表面的吸附. 设置不同的水层厚度, 观察固液界面和气液界面吸附的差异. 模拟发现表面活性剂分子能够在短时间内吸附到SiO2表面, 受碳链和固体表面之间相互作用的影响形成表面活性剂分子层, 并依据吸附量的大小形成不同的聚集结构; 在水层足够厚的情况下, 由于有较多的表面活性剂分子吸附在固体表面,从而形成带有疏水核心的半胶束结构; 计算得到的成对势表明极性头与钠离子或水分子之间的结合或解离与二者之间的能垒有关, 解离能垒远大于结合能垒, 引起更多Na+聚集在极性头周围而只有少数Na+存在于溶液中; 无论气液还是固液界面, 极性头均伸向水相, 与水分子形成不同类型的氢键. 模拟表明, 分子动力学方法可以作为实验的一种补充, 为实验提供必要的微观结构信息.     

接触角及其在表面化学研究中的应用

润湿是一种流体取代界面上另一种流体的界面现象,通常是指液体从固体表面取代气体的过程。如在干净玻璃板上加水,排走表面上的空气形成薄的水膜,即为铺展润湿,简称铺展,此过程的特点是原固气界面消失,气液界面扩大,并形成新的固液界面。将固体完全浸渍于液体中,固气界面消失,气液界面不变,形成新的固液界面,此过程为现润湿（浸湿）。液体与固体接触,气液和固气界面减小,形成固液界面的过程为沾湿。润湿过程涉及固体和液     

两亲性分子聚集体的相变及其协同性

两亲性分子聚集体是一类重要的软物质,它们有着丰富而复杂的相行为.本文主要从两个方面综述了作者所在的研究组在两亲性分子聚集体相变研究方面的工作进展.(1)磷脂相关体系相变热力学:归纳了多种小分子(二甲基亚砜、甘油、海藻糖、尿素等)对于磷脂体系相行为的调控,比较并讨论了固醇类分子和葡萄糖神经酰胺分子诱导磷脂分子形成液态有序相的能力,还介绍了计算机模拟磷脂相行为的工作进展.(2)两亲性分子聚集体相变的协同性:先介绍了相变协同性(即分子头部、尾部、界面等基团在相变过程中的一致性)问题的提出,然后通过双十八烷基二甲基溴化铵分子和硬脂酰溶血卵磷脂两个体系的研究实例,说明两亲性分子聚集体相变过程中存在着头尾不一致的现象.对这个问题的研究,将为我们打开挑战相态转变的一系列重大问题(如相变动力学、相态多型性、相态稳定性以及相变可逆性等)的新窗口.     

固液界面纳米气泡研究

固液界面纳米气泡是近十年来表面科学的重要发现之一。从利用原子力显微镜(AFM)在固液界面上观察到纳米气泡以来,科学工作者们已经证实了纳米气泡在固液界面上存在。由于其在微机电系统(MEMS)、微生化系统、表面科学、流体动力学等领域潜在的应用价值,各国学者们对纳米气泡的自身性质及影响因素已经开展了多方面的研究。但纳米气泡稳定性(反常的长寿)的原因仍然是未解决的问题之一。本文综述了纳米气泡的形成及影响因素,重点评述了纳米气泡稳定性理论,包括线张力理论、动态平衡理论、杂质理论和克努森气体理论等。同时,介绍了固液界面纳米气泡的应用,并展望了未来研究的重点和方向。     

2-(1-萘基偶氮)-咪唑的合成及组装Langmuir-Blodgett膜

合成了一个非典型两亲性分子,2-(1-萘基偶氮)-咪唑(2-NDIM),对它在气/液界面上的组装和LB膜性质进行了研究。结果表明:2-NDIM不能在水相表面形成Langmuir膜,在Ag NO3水溶液亚相中能形成稳定、均匀的配位聚合物单分子膜,组装的LB膜为J-聚集体,最大吸收波长为403nm,归属于反式-N=N-双键的π-π*电子跃迁,光激发LB膜中偶氮基团的反-顺异构化作用不明显,具有较低的反-顺光异构化量子产率。     

Physicochemical characterization and tube-like structure formation of a novel amino acid-based zwitterionic amphiphile N-(2-hydroxydodecyl)-L-valine in water

Surface activity and aggregation behavior of an amino acid-based zwitterionic amphiphile N-(2-hydroxydodecyl)-L-valine were studied in aqueous solutions (pH 13). The self-assembly formation was investigated by use of a number of techniques including surface tension, conductivity, viscosity, fluorescence spectroscopy, dynamic light scattering, and transmission electron microscopy. The amphiphile exhibits two breaks in the surface tension vs concentration plot indicating stepwise aggregate formation and thus results in two values of critical aggregation concentration. The amphiphile was found to be very surface active compared to fatty acid soaps. The average hydrodynamic diameter and size distribution of the aggregates were obtained from DLS measurements. Conductivity measurements suggested formation of vesicles or closed tubules. TEM pictures revealed the existence of spherical vesicles, separated tubules, and tubules with multiple Y-type junctions in going from dilute to moderately concentrated solution. However, in concentrated solution, the junctions break to form separate tubular structures which upon further increase of concentration are converted to rod-like micelles. The mechanism of branched tubule formation is discussed in light of the experimental observations.     

Spontaneous formation of vesicles by sodium 2-dodecylnicotinate in water

The surface activity and aggregation behavior of a synthesized nicotinic acid based anionic surfactant, sodium 2-dodecylnicotinate, were studied in aqueous solution. The self-assembly formation was investigated by use of a number of techniques, including surface tension and conductivity measurements, fluorescence spectroscopy, dynamic light scattering measurement, gel permeation chromatography, and microscopy. The amphiphile exhibits two breaks in the surface tension vs concentration plot, indicating stepwise aggregate formation and thus producing two values of the aggregation concentration. Stepwise aggregation of the amphiphile was further confirmed by steady-state fluorescence spectroscopy using pyrene as a probe molecule, and also the micropolarity of the aggregates was determined. The rigidity of the microenvironment was estimated by determining steady-state fluorescence anisotropy using 1,6-diphenyl-1,3,5-hexatriene as a fluorescence probe molecule. The average hydrodynamic radius and size distribution of the aggregate suggest formation of larger aggregates in aqueous solution. The formation of vesicles in water was established by conductivity measurement and a dye entrapment experiment. The entrapment of a small solute and the release capability have also been examined to demonstrate these bilayers form enclosed vesicles. Transmission electron micrographs revealed the existence of closed vesicles and closed tubules in aqueous solution. Therefore, for the first time, it has been observed that this simple single-chain nicotinic acid based amphiphile spontaneously assembles to vesicles in aqueous solution.     

Surface and bulk properties of aqueous decyltrimethylammonium bromide-hexadecyltrimethylammonium bromide mixed system

The aqueous mixed system decyltrimethylammonium bromide (C(10)TAB)-hexadecyltrimethylammonium bromide (C(16)TAB) was studied by conductivity, ion-selective electrodes, surface tension, and fluorescence spectroscopy techniques. The mixture critical micelle concentration, cmc(*), aggregation number, N( *), and micelle molar conductivity, Lambda(M)(cmc), showed that the system aggregation is strongly nonideal. Both cmc(*) and N( *) results were analyzed with two different procedures: (i) the regular solution theory on mixed micelles or Rubingh's theory, and (ii) by the determination of the partial critical micelle concentration of the amphiphile component i in the presence of a constant concentration of the other amphiphile component, cmc(i)( *). The Rubingh procedure gives micelles richer in C(16)TAB than the overall mixtures, while procedure (ii) gives micelles having the same composition as in the complete surfactant mixture (alpha(C(10)TAB). Mixed micelles are larger than pure surfactant ones, with nonspherical shape. Using a literature model, the cause of the synergistic effect seems to be a reduction of the hydrocarbon/water contact at the micelle surface when mixed micelles form. Conductivity and ion-selective electrodes indicate that highly ionized premicelles form immediately before the cmc(*). The air/solution interface is strongly nonideal and much richer in C(16)TAB than the composition in the bulk. When micelles form there is a strong desorption from the air/solution interface because micelles are energetically favored when compared with the monolayer.     

Synthesis and vesicular self-assembly of a novel asymmetric cationic and ethoxylated amphiphile

Cationic quaternary ammonium and nonionic oligo(ethylene oxide) are attractive classes of polar units for new amphiphile synthesis. However, they present distinct physical and chemical properties. We combine these two hydrophilic groups to each side of a hydrophobic segment, getting a new asymmetric cationic ethoxylated amphiphile (EO₁₂BphC₁₀NC₁₂). Different from common amphiphiles, EO₁₂BphC₁₀NC₁₂ not only connects different hydrophilic units on both ends of hydrophobic spacers but also integrates the structural characters of bola- and gemini-form amphiphiles together, which brings interesting properties to the new building block. We studied its surface activity and self-assembly behavior in aqueous solution. It turns out that EO₁₂BphC₁₀NC₁₂ can reduce the surface tension of aqueous solution and self-assembly into vesicles above the critical aggregation concentration. More importantly, the strong nuclear Overhauser effect between quaternary ammonium cation and the first oxyethylene group indicates that the two headgroups locate at the vesicle surface together randomly, other than selectively occupy inner or outer vesicle surface. The synergistic effect of molecular size and hydration of different hydrophilic groups leads to the interdigitated packing state of alky chains in the vesicle with symmetric membrane.     

A non-steroidal facial amphiphile

This paper gives the synthesis of an unusual non-steroidal amphiphile consisting of a large rigid molecule that possesses two water-solubilizing sulfates on one face and an extended hydrophobic surface on the other. The properties of this compound have been examined by X-ray analysis, light and cryo-electron microscopy, surface tension, conductivity, microrheology, and NMR. Aqueous solutions behave quite differently from those of a conventional amphiphile with long linear and flexible chains (e.g., sodium dodecyl sulfate). Thus, there is evidence that the facial amphiphile self-assembles to form viscous networks, but without the traditional critical micelle concentration, as if assembly is a stepwise process. Emulsions of toluene in water promoted by the facial amphiphile are stable for many months. In contrast to conventional surfactants, the NMR peaks are obliterated in aqueous solutions of the facial amphiphile. Both X-ray and cryo-HRSEM data suggest a lamellar morphology.     

检测维生素C的囊泡荧光传感器的制备

利用合成的含有识别基团苯硼酸和荧光读出基团萘的新型双亲化合物(DNMPBA)在THF/水选择性溶剂中自组织成囊泡,囊泡的相变温度为56.8℃;当向囊泡体系加维生素C时,DNMPBA囊泡中的萘生色基在345nm的荧光峰强度急剧减弱.荧光强度减弱归于所形成的硼酸酯增强了DNMPBA双亲化合物中一个氧原子孤对电子对萘生色基的淬灭作用.DNMPBA囊泡与维生素C的相互作用而导致体系荧光强度变化,使该体系有可能应用于检测生物物质如维生素C的化学传感器.     

Properties of ABA and BA polysiloxane amphiphiles modified by polyether

To investigate the effect of content of polyether (F400) grafted on the properties of polysiloxane amphiphiles, polyether was grafted on the polysiloxane by hydrosilylation reaction with H₂PtCl₆ catalyst. The modified polysiloxanes were divided into two types; moreover, the ratio of polyether and polysiloxane was 1:1 or 1:2. The first one was similar to the conventional surfactant structure that is BA polysiloxane amphiphile, which own one hydrophobic chain and one hydrophilic group. Another one was ABA polysiloxane amphiphile, which possess one hydrophobic chain and two hydrophilic groups at the terminal. In our work, we compared the property of modified polysiloxanes with various contents of polyether in aqueous solution at room temperature to analyze the impact of polyether content on siloxane surfactants. The conclusion was that siloxane amphiphiles possess good solubility, high surface activity, and excellent spreading property.     

新型含苯硼酸和萘双亲化合物的合成与囊泡荧光传感器的制备

合成了含有识别基团苯硼酸和荧光基团萘的新型对-[(5-十二烷氧基-1-氧基)萘]甲基苯硼酸{p-[(5-dodecyloxy-1-oxy) naphthalene] methyl-phenylboronic acid, DNMPBA}双亲化合物; 该化合物在THF/水选择性溶剂中自组织成囊泡, 囊泡的相变温度为56.8 ℃; 当向囊泡体系加糖时, DNMPBA囊泡中的萘生色基在345 nm的荧光峰强度急剧增强; 荧光强度随添加不同糖的变化趋势为果糖>葡萄糖>麦芽糖>乙二醇. 荧光强度增强可能归因于所形成的硼酸酯减弱了DNMPBA双亲化合物中一个氧原子孤对电子对萘生色基的猝灭作用而使荧光强度重新恢复. DNMPBA囊泡与糖的相互作用导致体系荧光强度变化, 使该体系有可能应用于检测生物物质如糖的化学传感器.     

Multiple phase inversion of emulsions stabilized by in situ surface activation of CaCO3 nanoparticles via adsorption of fatty acids

The in situ surface activation of raw CaCO(3) nanoparticles by interaction with a series of sodium carboxylates of chain length between 6 and 12 as well as sodium 2-ethylhexylsulfosuccinate (AOT) was studied, and the impact of this on the stabilization and phase inversion of toluene-water emulsions was assessed. By using complementary experiments including measurement of particle zeta potentials, adsorption isotherms of amphiphile, and relevant contact angles, the mechanism of this activation was revealed. The results show that hydrophilic CaCO(3) nanoparticles can be surface activated by interaction with sodium carboxylates and AOT even if they are not surface-active themselves. Both the electrostatic interaction between the positive charges on particle surfaces and the negative charges of anionic amphiphile headgroups and the chain-chain interactions of the amphiphile result in monolayer adsorption of the amphiphile at the particle-water interface. This transforms the particles from hydrophilic to partially hydrophobic such that they become surface-active and stabilize oil-in-water O/W(1) emulsions and induce O/W(1) → water-in-oil W/O phase inversion, depending on the chain length of the carboxylate molecules. At high amphiphile concentration, bilayer or hemimicelle adsorption may occur at the particle-water surface, rendering particles hydrophilic again and causing their desorption from the oil-water interface. A second phase inversion, W/O → O/W(2), may occur depending on the surface activity of the amphiphile. CaCO(3) nanoparticles can therefore be made good stabilizers of both O/W and W/O emulsions once surface activated by mixing with traces of suitable anionic amphiphile.     

Investigation in monolayers of double-chain fluorocarbon amphiphiles Effect of headgroups on molecular packing and interaction between hydrocarbon and fluorocarbon monolayers

The surface pressure-area diagrams of double-chain fluorocarbon amphiphiles with different headgroup compositions show that the amphiphiles arrange almost perpendicularly to the water subphase and the structure of headgroups exerts significant influence on the amphiphile packing. Strong hydrogen bonding and weak electrostatic interaction favor the formation of stable monolayers. Perfluorooctanoic acid (FOA) cannot form monolayer at water/air interface and can only form liquid monolayer in subphase of calcium nitrate solution. Complete phase separation of palmitic acid and a fluorocarbon amphiphile with shorter hydrocarbon spacer group, 1, could be demonstrated in monolayers by using the phase rule of Crisp. The creation of phase-separated monolayers is possible when the monolayer is composed of a mixture of palmitic acid and a fluorocarbon amphiphile with longer hydrocarbon spacer group, 2. It can be suggested that the miscibility of hydrocarbon amphiphiles with fluorocarbon amphiphiles is determined by the hydrocarbon fraction of fluorocarbon amphiphiles.