Dual-Interface Engineering in Perovskite Solar Cells with 2D Carbides

Passivating the interfaces between the perovskite and charge transport layers is crucial for enhancing the power conversion efficiency (PCE) and stability in perovskite solar cells (PSCs). Here we report a dual-interface engineering approach to improving the performance of FA_0.85MA_0.15Pb(I_0.95Br_0.05)₃-based PSCs by incorporating Ti₃C₂Cl_x Nano-MXene and o-TB-GDY nanographdiyne (NanoGDY) into the electron transport layer (ETL)/perovskite and perovskite/ hole transport layer (HTL) interfaces, respectively. The dual-interface passivation simultaneously suppresses non-radiative recombination and promotes carrier extraction by forming the Pb−Cl chemical bond and strong coordination of π-electron conjugation with undercoordinated Pb defects. The resulting perovskite film has an ultralong carrier lifetime exceeding 10 μs and an enlarged crystal size exceeding 2.5 μm. A maximum PCE of 24.86 % is realized, with an open-circuit voltage of 1.20 V. Unencapsulated cells retain 92 % of their initial efficiency after 1464 hours in ambient air and 80 % after 1002 hours of thermal stability test at 85 °C.     

High‐Purity Inorganic Perovskite Films for Solar Cells with 9.72 % Efficiency

All‐inorganic perovskite solar cells with high efficiency and improved stability are promising for commercialization. A multistep solution‐processing method was developed to fabricate high‐purity inorganic CsPbBr₃ perovskite films for use in efficient solar cells. By tuning the number of deposition cycles (n) of a CsBr solution, the phase conversion from CsPb₂Br₅ (n ≤3), to CsPbBr₃ (n=4), and Cs₄PbBr₆ (n≥5) was optimized to achieve vertical‐ and monolayer‐aligned grains. Upon interfacial modification with graphene quantum dots, the all‐inorganic perovskite solar cell (without a hole‐transporting layer) achieved a power conversion efficiency (PCE) as high as 9.72 % under standard solar illumination conditions. Under challenging conditions, such as 90 % relative humidity (RH) at 25 °C or 80 °C at zero humidity, the optimized device retained 87 % PCE over 130 days or 95 % over 40 days, compared to the initial efficiency.     

Managing Excess Lead Iodide with Functionalized Oxo-Graphene Nanosheets for Stable Perovskite Solar Cells

Stability issues could prevent lead halide perovskite solar cells (PSCs) from commercialization despite it having a comparable power conversion efficiency (PCE) to silicon solar cells. Overcoming drawbacks affecting their long-term stability is gaining incremental importance. Excess lead iodide (PbI₂) causes perovskite degradation, although it aids in crystal growth and defect passivation. Herein, we synthesized functionalized oxo-graphene nanosheets (Dec-oxoG NSs) to effectively manage the excess PbI₂. Dec-oxoG NSs provide anchoring sites to bind the excess PbI₂ and passivate perovskite grain boundaries, thereby reducing charge recombination loss and significantly boosting the extraction of free electrons. The inclusion of Dec-oxoG NSs leads to a PCE of 23.7 % in inverted (p-i-n) PSCs. The devices retain 93.8 % of their initial efficiency after 1,000 hours of tracking at maximum power points under continuous one-sun illumination and exhibit high stability under thermal and ambient conditions.     

Tetra‐ammonium Zinc Phthalocyanine to Construct a Graded 2D–3D Perovskite Interface for Efficient and Stable Solar Cells

The crystallographic defects inevitably incur during the solution processed organic‐inorganic hybrid perovskite film, especially at surface and the grain boundaries (GBs) of perovskite film, which can further result in the reduced cell performance and stability of perovskite solar cells (PSCs). Here, a simple defect passivation method was employed by treating perovskite precursor film with a hydrophobic tetra‐ammonium zinc phthalocyanine (ZnPc). The results demonstrated that a 2D‐3D graded perovskite interface with a capping layer of 2D (ZnPc)_0.5MA_n ? 1Pb_nI_3n + 1 perovskite together with 3D MAPbI₃ perovskite was successfully constructed on the top of 3D perovskite layer. This situation realized the efficient GBs passivation, thus reducing the defects in GBs. As expected, the corresponding PSCs with modified perovskite revealed an improved cell performance. The best efficiency reached 19.6%. Especially, the significantly enhanced long‐term stability of the responding PSCs against humidity and heating was remarkably achieved. Such a strategy in this work affords an efficient method to improve the stability of PSCs and thus probably brings the PSCs closer to practical commercialization.     

Fluorine-Containing Passivation Layer via Surface Chelation for Inorganic Perovskite Solar Cells

Minimizing surface defect is vital to further improve power conversion efficiency (PCE) and stability of inorganic perovskite solar cells (PSCs). Herein, we designed a passivator trifluoroacetamidine (TFA) to suppress CsPbI_3−xBr_x film defects. The amidine group of TFA can strongly chelate onto the perovskite surface to suppress the iodide vacancy, strengthened by additional hydrogen bonds. Moreover, three fluorine atoms allow strong intermolecular connection via intermolecular hydrogen bonds, thus constructing a robust shield against moisture. The TFA-treated PSCs exhibit remarkably suppressed recombination, yielding the record PCEs of 21.35 % and 17.21 % for 0.09 cm² and 1.0 cm² device areas, both of which are the highest for all-inorganic PSCs so far. The device also achieves a PCE of 39.78 % under indoor illumination, the highest for all-inorganic indoor photovoltaic devices. Furthermore, TFA greatly improves device ambient stability by preserving 93 % of the initial PCE after 960 h.     

Molecular Dipole Engineering of Carbonyl Additives for Efficient and Stable Perovskite Solar Cells

Carbonyl functional materials as additives are extensively applied to reduce the defects density of the perovskite film. However, there is still a lack of comprehensive understanding for the effect of carbonyl additives to improve device performance. In this work, we systematically study the effect of carbonyl additive molecules on the passivation of defects in perovskite films. After a comprehensive investigation, the results confirm the importance of molecular dipole in amplifying the passivation effect of additive molecules. The additive with strong molecular dipole possesses the advantages of enhancing the efficiency and stability of perovskite solar cells (PSCs). After optimization, the companion efficiency of PSCs is 23.20 %, and it can maintain long-term stability under harsh conditions. Additionally, a large-area solar cell module-modified DLBA was 20.18 % (14 cm²). This work provides an important reference for the selection and designing of efficient carbonyl additives.     

Low-Cost Hydroxyacid Potassium Synergists as an Efficient In Situ Defect Passivator for High Performance Tin-Oxide-Based Perovskite Solar Cells

Perovskite solar cells (PSCs) based on SnO₂ electron transport layers have attracted extensive research due to their compelling photovoltaic performance. Herein, we presented an in situ passivation of SnO₂ with low-cost hydroxyacid potassium synergist during deposition to optimize the interface carrier extraction and transport for high power conversion efficiency (PCE) and stabilities of PSCs. The orbital overlap of the carboxyl oxygen with the Sn atom alongwith the homogenous nano-particle deposition effectively suppresses the interfacial defects and releases the internal residual strains in the perovskite. Accordingly, a PCE of 24.91 % with a fill factor (FF) up to 0.852 is obtained for in situ passivated devices, which is one of the highest values for SnO₂-based PSCs. Moreover, the unencapsulated device maintained 80 % of its initial PCE at 80 °C over 600 h, 100 % PCE at ambient conditions for 1300 h, and 98 % after one week maximum power point tracking (MPPT) under continuous AM1.5G illumination.     

Defect and doping concentration study with series and shunt resistance influence on graphene modified perovskite solar cell: A numerical investigation in SCAPS-1D framework

Perovskite solar cells (PSCs) have the potential to be highly efficient, low-cost next-generation solar cells. By raising open circuit voltage (V_oc), the interfacial recombination kinetics can further improve device performance. In this study, we used simulation concept to elucidate the influence of using graphene as a surface passivation material in perovskite solar cells. Graphene works well as an interlayer to promote hole extraction and reduce interfacial recombination. In order to evaluate the effect of graphene in PSCs, the simulation was done in the SCAPS-1D framework to compare the performance of a device with and without graphene. Three interface layers were included to the model: TiO₂/MAPbI₃, MAPbI₃/Graphene, and Graphene/Spiro-OMeTAD, in order to account for the impacts of interface defect density on device performance. The impacts of absorber doping concentration, absorber defect density, ETL doping concentration, HTL doping concentration, series resistance, and shunt resistance were also evaluated for the modelled PSC. Without any optimization, the control device with power conversion efficiency (PCE) of 20.677% was outperformed by the graphene-modified device with PCE of 20.911%. This difference is mostly due to the lower recombination losses and more effective suppression of interfacial non-radiative recombination. With optimization, the modified graphene-based device has a PCE of 26.667%. This result shows an enhancement of ∼1.28 times over that of the pristine graphene-based device. The outcomes have opened the way for the development of cost-effective and comparable state-of-the-art, high-efficiency perovskite solar cells with graphene interlayer by eliminating defects and managing non-radiative recombination.     

Large area,waterproof, air stable and cost effective efficient perovskite solar cells through modified carbon hole extraction layer

The conventional unstable and expensive hole transporting materials (HTM) has been replaced by cost effective modified carbon hole extraction layer. Herein, we demonstrated a new recipe toward air stable and waterproof modified carbon hole extraction layer for efficient perovskite solar cells (PSCs). The commercial available carbon ink modified with methylammonium lead iodide (MAI) has been used as hole extraction layer for ambipolar perovskite solar cells. The fabricated optimized perovskite solar cell having Glass/FTO/mp-TiO₂/MAPbI_3-xCl_x/carbon + MAI/Carbon configuration exhibited η = 13.87% power conversion efficiency (PCE) with open circuit voltage (V_OC) 0.997 V, current density (J_SC) = 21.41 mAcm^?2 and fill factor (FF) 0.65. Furthermore, the air stability were tested at room temperature in open atmosphere. The water proof stability was tested under water flushing. Our results revealed that, although our carbon based devices show lower PCE (η = 13.87%) compared to spiro-MeOTAD HTM (η = 15%), the fabricated PSCs could even retain >90% after water exposure >20 times and ambient air stability more than 160 days. Further the large area device (>1 cm²) device shows 13.04% PCE with Jsc = 21.47 mAcm^?2, V_OC = 0.996 V and FF = 0.61. We have also demonstrated >13% efficiency for large area device (>1.1 cm²), demonstrating that the developed method is simple, cost effective and promising towards large area device fabrication. The developed methodology based on low cost carbon hole extraction layer will be helpful towards waterproof and air stable perovskite solar cells for large-area devices.     

Aggregation-induced Emission Materials for High-efficiency Perovskite Solar Cells

The perovskite solar cells (PSCs) with high efficiency and stability are in great demand for commercial applications. Although the remarkable photovoltaic feature of perovskite layer plays a great role in improving the PCE of PSCs, the inevitable defects and poor stability of perovskite, etc. are the bottleneck and restrict the commercialization of PSCs. Herein, a review provides a strategy of applying aggregation-induced emission (AIE) molecules, containing passivation functional groups and distinct AIE character, which serves as the alternative materials for fabricating high-efficiency and high-stability PSCs. The methods of introducing AIE molecules to PSCs are also summarized, including additive engineering, interfacial engineering, hole transport materials and so on. In addition, the functions of AIE molecule are discussed, such as defects passivation, morphology modulation, well-matched energy level, enhanced stability, hole transport ability, carrier recombination suppression. Finally, the detailed functions of AIE molecules are offered and further research trend for high performance PSCs based on AIE materials is proposed.     

Managing Multiple Halide-Related Defects for Efficient and Stable Inorganic Perovskite Solar Cells

Halide-related surface defects on inorganic halide perovskite not only induce charge recombination but also severely limit the long-term stability of perovskite solar cells. Herein, adopting density functional theory calculation, we verify that iodine interstitials (I_i) has a low formation energy similar to that of the iodine vacancy (V_I) and is also readily formed on the surface of all-inorganic perovskite, and it is regarded to function as an electron trap. We screen a specific 2,6-diaminopyridine (2,6-DAPy) passivator, which, with the aid of the combined effects from halogen-N_pyridine and coordination bonds, not only successfully eliminates the I_i and dissociative I₂ but also passivates the abundant V_I. Furthermore, the two symmetric neighboring -NH₂ groups interact with adjacent halides of the octahedral cluster by forming hydrogen bonds, which further promotes the adsorption of 2,6-DAPy molecules onto the perovskite surface. Such synergetic effects can significantly passivate harmful iodine-related defects and undercoordinated Pb²⁺, prolong carrier lifetimes and facilitate the interfacial hole transfer. Consequently, these merits enhance the power-conversion efficiency (PCE) from 19.6 % to 21.8 %, the highest value for this type of solar cells, just as importantly, the 2,6-DAPy-treated CsPbI_3−xBr_x films show better environmental stability.     

Interfacial Engineering for Efficient Low-Temperature Flexible Perovskite Solar Cells

Photovoltaic technology with low weight, high specific power in cold environments, and compatibility with flexible fabrication is highly desired for near-space vehicles and polar region applications. Herein, we demonstrate efficient low-temperature flexible perovskite solar cells by improving the interfacial contact between electron-transport layer (ETL) and perovskite layer. We find that the adsorbed oxygen active sites and oxygen vacancies of flexible tin oxide (SnO₂) ETL layer can be effectively decreased by incorporating a trace amount of titanium tetrachloride (TiCl₄). The effective defects elimination at the interfacial increases the electron mobility of flexible SnO₂ layer, regulates band alignment at the perovskite/SnO₂ interface, induces larger perovskite crystal growth, and improves charge collection efficiency in a complete solar cell. Correspondingly, the improved interfacial contact transforms into high-performance solar cells under one-sun illumination (AM 1.5G) with efficiencies up to 23.7 % at 218 K, which might open up a new era of application of this emerging flexible photovoltaic technology to low-temperature environments such as near-space and polar regions.     

Stabilization of Highly Efficient and Stable Phase‐Pure FAPbI3 Perovskite Solar Cells by Molecularly Tailored 2D‐Overlayers

As a result of their attractive optoelectronic properties, metal halide APbI₃ perovskites employing formamidinium (FA⁺) as the A cation are the focus of research. The superior chemical and thermal stability of FA⁺ cations makes α‐FAPbI₃ more suitable for solar‐cell applications than methylammonium lead iodide (MAPbI₃). However, its spontaneous conversion into the yellow non‐perovskite phase (δ‐FAPbI₃) under ambient conditions poses a serious challenge for practical applications. Herein, we report on the stabilization of the desired α‐FAPbI₃ perovskite phase by protecting it with a two‐dimensional (2D) IBA₂FAPb₂I₇ (IBA=iso‐butylammonium overlayer, formed via stepwise annealing. The α‐FAPbI₃/IBA₂FAPb₂I₇ based perovskite solar cell (PSC) reached a high power conversion efficiency (PCE) of close to 23 %. In addition, it showed excellent operational stability, retaining around 85 % of its initial efficiency under severe combined heat and light stress, that is, simultaneous exposure with maximum power tracking to full simulated sunlight at 80 °C over 500 h.     

Wide-Bandgap Perovskite Solar Cell Using a Fluoride-Assisted Surface Gradient Passivation Strategy

Wide-band gap (1.68 eV) perovskite solar cells (PSCs) are important components of perovskite/Si tandem devices. However, the efficiency of wide band gap PSCs has been limited by their huge open-circuit voltage (V_oc) deficit due to non-radiative recombination. Deep-level acceptor defects are identified as the major killers of V_oc, and they can be effectively improved by passivation with ammonium salts. Theoretical calculation predicts that increasing the distance between F and −NH₃⁺ of fluorinated ammonium can dramatically enhance the electropositivity of −NH₃⁺ terminals, thus providing strong adsorption onto the negatively charged I_A and I_Pb anti-site defects. Characterizations further confirm that surface gradient passivation employing p-FPEAI demonstrates the most efficient passivation effect. Consequently, a record-efficiency of 21.63 % with the smallest V_oc deficit of 441 mV is achieved for 1.68 eV-band gap inverted PSCs. Additionally, a flexible PSC and 1 cm² opaque device also deliver the highest PCEs of 21.02 % and 19.31 %, respectively.     

Efficient All-Perovskite Tandem Solar Cells with Low-Optical-Loss Carbazolyl Interconnecting Layers

Combining wide-band gap (WBG) and narrow-band gap (NBG) perovskites with interconnecting layers (ICLs) to construct monolithic all-perovskite tandem solar cell is an effective way to achieve high power conversion efficiency (PCE). However, optical losses from ICLs need to be further reduced to leverage the full potential of all-perovskite tandem solar cells. Here, metal oxide nanocrystal layers anchored with carbazolyl hole-selective-molecules (CHs), which exhibit much lower optical loss, is employed to replace poly(3,4-ethylenedioxythiophene) polystyrenesulfonate (PEDOT : PSS) as the hole transporting layers (HTLs) in lead-tin (Pb-Sn) perovskite sub-cells and ICLs in all-perovskite tandem solar cells. Optically transparent indium tin oxide nanocrystals (ITO NCs) layers are employed to enhance anchoring of CHs, while a mixture of two CHs is adopted to tune the surface energy-levels of ITO NCs. The optimized mixed Pb-Sn NBG perovskite solar cells demonstrate a high PCE of 23.2 %, with a high short-circuit current density (J_sc) of 33.5 mA cm⁻². A high PCE of 28.1 % is further obtained in all-perovskite tandem solar cells, with the highest J_sc of 16.7 mA cm⁻² to date. Encapsulated tandem solar cells maintain 90 % of their reference point after 500 h of operation at the maximum power point (MPP) under 1-Sun illumination.     

A thioacetamide additive-based hybrid (MA0.5FA0.5)PbI3 perovskite solar cells crossing 21 % efficiency with excellent long term stability

An additive in hybrid perovskite is playing a vital role in the increment of power conversion efficiency (PCE), stability, and reproducibility of perovskite solar cells (PVSCs). Although, single-phase α-FAPbI₃ perovskite has an ideal band gap but is continuously transforming to δ–FAPbI₃, which is non-photoactive. Here, we controlled the methylammonium (MA) and formamidinium (FA) ratio in the (MA_xFA_1-x)PbI₃ perovskite composition and tuned its morphology with the help of the thioacetamide (TAA) Lewis base additive. The optimum MA:FA ratio and fine-tuning of TAA additive result in a highly crystalline, large grain size and smooth surface of the (MA_0.5FA_0.5)PbI₃ perovskite film. These highly uniform thin films with 850 nm grain size offered a superior interaction between the perovskite material and the electron transport layer (ETL) and a longer lifetime yielding a high PCE. The (MA_0.5FA_0.5)PbI₃+1% TAA-based champion device exhibited the highest PCE of 21.29% for a small area (0.09 cm²) and 18.32% PCE for a large area (1 cm²). The TAA-assisted devices exhibited high stability with >85% retention over 500 h. These results suggest that the (MA_0.5FA_0.5)PbI₃ along with the 1% TAA additive is a promising absorber layer that can produce >21% PCE.     

界面钝化策略:提高钙钛矿太阳能电池的稳定性

近年来,新兴起的有机无机杂化钙钛矿太阳能电池突飞猛进,在短短十年里其光电转化效率从3.8%迅速发展到目前25.2%的认证效率,被视为最具有应用潜力的新型高效率太阳能电池之一。虽然钙钛矿太阳能电池具有很高的光电转换效率已与多晶硅薄膜电池相媲美,但是电池的长期稳定性仍是阻碍其商业化的一大挑战。钙钛矿表面和晶界存在大量的缺陷,界面钝化来提高钙钛矿太阳能电池的稳定性是非常重要且有效的策略。二维钙钛矿材料是有机胺层与无机层交替的层状钙钛矿,具有体积较大的有机铵阳离子,与传统的三维钙钛矿材料相比对于环境的稳定性较好,并且结构灵活可调,在三维钙钛矿表面修饰二维钙钛矿层钝化缺陷,在提高钙钛矿太阳能电池效率的同时又保证了稳定性,另外,合适的钝化剂分子也能够非常有效地钝化缺陷。本文总结了钙钛矿太阳能电池的不稳定因素,归纳了钙钛矿太阳能电池界面钝化方面的研究进展,指出了二维钙钛矿材料发展的巨大潜力以及寻找合适钝化剂分子的原则,期望能够为获得高性能的钙钛矿太阳能电池进而实现商业化提供有益的指导。     

Enhancement of the efficiency and stability of planar p-i-n perovskite solar cells via incorporation of an amine-modified fullerene derivative as a cathode buffer layer

A methanol-soluble diamine-modified fullerene derivative (denoted as PCBDANI) was applied as an efficient cathode buffer layer (CBL) in planar p-i-n perovskite solar cells (pero-SCs) based on the CH₃NH₃PbI_3–x Cl _x absorber. The device with PCBDANI single CBL exhibited significantly improved performance with a power conversion efficiency (PCE) of 15.45%, which is approximately 17% higher than that of the control device without the CBL. The dramatic improvement in PCE can be attributed to the formation of an interfacial dipole at the PCBM/Al interface originating from the amine functional group and the suppression of interfacial recombination by the PCBDANI interlayer. To further improve the PCE of pero-SCs, PCBDANI/LiF double CBLs were introduced between PCBM and the top Al electrode. An impressive PCE of 15.71% was achieved, which is somewhat higher than that of the devices with LiF or PCBDANI single CBL. Besides the PCE, the long-term stability of the device with PCBDANI/LiF double CBLs is also superior to that of the device with LiF single CBL.     

Observing Defect Passivation of the Grain Boundary with 2-Aminoterephthalic Acid for Efficient and Stable Perovskite Solar Cells

Metal halide perovskite solar cells (PSCs), with their exceptional properties, show promise as photoelectric converters. However, defects in the perovskite layer, particularly at the grain boundaries (GBs), seriously restrict the performance and stability of PSCs. Now, a simple post-treatment procedure involves applying 2-aminoterephthalic acid to the perovskite to produce efficient and stable PSCs. By optimizing the post-treatment conditions, we created a device that achieved a remarkable power conversion efficiency (PCE) of 21.09 % and demonstrated improved stability. This improvement was attributed to the fact that the 2-aminoterephthalic acid acted as a cross-linking agent that inhibited the migration of ions and passivated the trap states at GBs. These findings provide a potential strategy for designing efficient and stable PSCs regarding the aspects of defect passivation and crystal growth.     

Graphdiyne: Bridging SnO2 and Perovskite in Planar Solar Cells

The matching of charge transport layer and photoactive layer is critical in solar energy conversion devices, especially for planar perovskite solar cells based on the SnO₂ electron‐transfer layer (ETL) owing to its unmatched photogenerated electron and hole extraction rates. Graphdiyne (GDY) with multi‐roles has been incorporated to maximize the matching between SnO₂ and perovskite regarding electron extraction rate optimization and interface engineering towards both perovskite crystallization process and subsequent photovoltaic service duration. The GDY doped SnO₂ layer has fourfold improved electron mobility due to freshly formed C?O σ bond and more facilitated band alignment. The enhanced hydrophobicity inhibits heterogeneous perovskite nucleation, contributing to a high‐quality film with diminished grain boundaries and lower defect density. Also, the interfacial passivation of Pb?I anti‐site defects has been demonstrated via GDY introduction.