Room-Temperature,Metal-Free,and One-Pot Preparation of 2H-Indazoles through a Mills Reaction and Cyclization Sequence

The Mills reaction and cyclization of readily available 2-aminobenzyl alcohols and nitrosobenzenes using thionyl bromide provided 2H-indazoles in up to 88 % yields. In the metal-free process, acetic acid played a crucial role for the both Mills reaction and cyclization. A brominated 2H-indazole could also be obtained through the one-pot sequence.     

Wavelength-Dependent Transient Characteristics Caused by Gain Saturation in Highly Nonlinear Fiber-Based Raman Amplifiers

We have investigated the transient characteristics of discrete Raman Amplifiers and found that the response time caused by gain saturation is dependent upon the wavelength, which corresponds to the effective length of the pump light.     

Superhydrophobic perpendicular nanopin film by the bottom-up process

We first fabricated the superhydrophobic film with a water contact angle of 178 degrees based on a perpendicular nanopin fractal structure by a bottom-up process. Until now, only materials with an original water contact angle larger than 90 degrees , which is classified as hydrophobicity, could be used to fabricate the superhydrophobic film (>170 degrees ) according to the possible fractal structure by a top-down process. Now, in this work, a water contact angle of about 178 degrees can be achieved using a lauric acid-coated film with an original contact angle of 75 degrees , which is classified as hydrophilicity, based on an ideal fractal structure for the superhydrophobic surface which is fabricated by the nanosize pin with 6.5 nm diameter.     

Efficient synthesis of 2-modified 1alpha,25-dihydroxy-19-norvitamin D3 with Julia olefination: high potency in induction of differentiation on HL-60 cells

Six novel 2-substituted analogues of 1alpha,25-dihydroxy-19-norvitamin D(3), 6a,b-8a,b, were efficiently synthesized utilizing (-)-quinic acid as the A-ring precursor. The C2-modified A-rings were prepared as 4-alkylated (3R,5R)-3,5-dihydroxycyclohexanones 12-15 from (-)-quinic acid based on radical allylation at the C4 position of methyl (-)-quinicate. The new type of the CD-ring coupling partner 23 was synthesized from 25-hydroxy Grundmann's ketone 19 to apply to the modified Julia olefination to construct a diene unit between the A-ring and the CD-ring. The coupling yields, including a deprotection step, were 47-62%. After the separation of the diastereomers based on C2 stereochemistry, the structure (2alpha or 2beta) was determined by (1)H NMR experiments and compared to DeLuca's 2-methyl- and 2-ethyl-1alpha,25-dihydroxy-19-norvitamin D(3). Thus, the synthesized 2alpha-(3-hydroxypropyl)-1alpha,25-dihydroxy-19-norvitamin D(3) (8a) showed almost the same potency in binding to the bovine thymus vitamin D receptor (VDR) as the natural hormone 1, while its beta-isomer 8b had only a 3% affinity. Both 2alpha-allyl- and 2alpha-propyl-1alpha,25-dihydroxy-19-norvitamin D(3) (6a and 7a) and their 2beta-analogues (6b and 7b) possessed a weak affinity for the VDR. The strong VDR ligand 8a was ca. 36-fold more potent in induction of HL-60 cell differentiation than 1, and interestingly, even the weaker ligand 8b showed a 6.7-fold higher potency in the cell differentiation activity than that of 1.     

Biomimetic oxidation of alcohols by coenzyme PQQ-trimethyl ester

Oxidation of alcohols to corresponding carbonyl compounds by coenzyme PQQ-trimethyl ester was performed in the presence of aluminum t-butoxide or aluminum chloride under anaerobic conditions. Reduced PQQTME (PQQTMEH₂) was obtained by acidification of an aluminum complex of reduced PQQTME which was isolated in the reaction.     

Remarkably stable gold nanoparticles functionalized with a zwitterionic liquid based on imidazolium sulfonate in a high concentration of aqueous electrolyte and ionic liquid

A new type of gold nanoparticle with a zwitterionic liquid function (zwitter-Au) has been prepared using an imidazolium sulfonate-terminated thiol as a capping agent. Zwitter-Au was found to be remarkably stable in high concentrations of aqueous electrolytes, ionic liquids, and protein.     

Synthesis and antinociceptive activity of orally active opioid peptides: improvement of oral bioavailability by esterification

To improve the oral bioavailability of a dermorphin tetrapeptide analog, N(alpha)-1-iminoethyl-Tyr-D-MetO-Phe-MebetaAla-OH (III), which has a potent analgesic activity after oral administration, various derivatives were synthesized to increase lipophilicity by esterification of the C-terminal carboxyl group and/or acylation of the phenolic hydroxyl group on Tyr1. Antinociceptive activity was evaluated after subcutaneous or oral administration using the mouse tail pressure test. As a result, increased antinociceptive activity after oral administration as well as an improved ED50(p.o.)/ED50(s.c.) ratio, which is an indicator of oral bioavailability, were found for some compounds. With regard to the improvement of bioavailability, derivatives with acylation of the phenolic hydroxyl group on Tyr1 showed better results than derivatives with esterification of the C-terminal carboxyl group. In particular, an ED50(p.o.)/ED50(s.c.) ratio equivalent to that of morphine was found for an acetylated derivative, N(alpha)-1-iminoethyl-Tyr(COMe)-D-MetO-Phe-MebetaAla-OH (7a), as well as for a methoxycarbonylated derivative, N(alpha)-1-iminoethyl-Tyr(CO2Me)-D-MetO-Phe-MebetaAla-OH (7l).     

Pyrolytic synthesis and Eu→Eu reduction process of blue-emitting perovskite-type BaLiF3:Eu thin films

Perovskite-type barium lithium fluoride (BaLiF₃) was synthesized by pyrolysis of metal trifluoroacetates. The reaction temperature necessary for producing a single-phase material was found to be 600°C, which was lower than that for a conventional solid-state reaction or a melting method. Eu-doped BaLiF₃ was also prepared and characterized to examine the suitability of trifluoroacetates for precursors in synthesizing homogeneous complex metal fluoride materials. It was demonstrated that trivalent Eu³⁺, which was used as acetate for a starting material, was reduced to divalent Eu²⁺ in the pyrolysis process of BaLiF₃, as indicated by a broad blue emission due to an allowed 4f⁶5d→4f⁷ transition at 408 nm with a ultraviolet excitation at 254 nm. The concentration quenching of the blue emission occurred at 5 at% of Eu in BaLiF₃, indicating that Eu was homogeneously dispersed in the BaLiF₃ host lattice. Mechanisms of the formation and reduction process of BaLiF₃ were discussed based on pertinent chemical reactions.     

Synthesis, properties, and crystal structure of a novel anthracene-bridged molybdenum-zinc porphyrin dimer

The synthesis and properties of novel anthracene-bridged porphyrin dimers having an oxomolybdenum(V) porphyrin unit, H(2)(DPA)[Mo(V)O(OMe)] (1) and (DPA)[Mo(V)O(OMe)][Zn(II)(MeOH)] (2), and the relevant monomer porphyrin complexes Mo(V)O(MPP)OMe (3) and Zn(II)(MPP) (4) are presented. An oxomolybdenum(V) unit was introduced into one of the two porphyrins in DPA to give 1, which has a free-base porphyrin unit. By introducing a zinc(II) ion to the free-base part, a mixed-metal complex of 2 was prepared and isolated. The structure of 2 was analyzed by X-ray crystallography (2.(7)/(6)CH(2)Cl(2), triclinic, P(-)1 (no. 2), a = 15.2854(12) A, b = 19.9640(15) A, c = 13.6915(12) A, alpha = 90.968(3), beta = 113.108(4), gamma = 96.501(4), Z = 2, R1 = 9.9, wR2 = 19.2). The structure of 2 demonstrated that a methanol is stably coordinated to the Zn(II) ion with the aid of a hydrogen bond to the methoxo ligand on the Mo(V) ion in the binding pocket of DPA. The electrochemical measurements of 2 suggested that the methanol was kept in the pocket of DPA in solution even at the reduced state of the molybdenum ion.     

High output power operation of 1.3-μm strained MQW lasers with low threshold currents at high temperature

We have investigated the temperature dependencies of the slope efficiency and the threshold current for strained multiquantum well (MQW) lasers as a parameter of the well number. Smaller well numbers mean larger temperature dependencies of the slope efficiency and the threshold current, while larger well numbers mean larger internal loss and broadening of the photoluminescence linewidth of the MQW structure. Furthermore, the change in the slope efficiency with temperature change is related to the change in internal loss. In this work, the 1.3-m strained MQW laser with a compressive strain of 1.0% and 7 wells shows the highest output power of 6.8 mW for an injection current of 50 mA and the lowest threshold current of 5.5 mA at 85°C, and the lowest variation in output power of 2.0 dB from 25–85°C at injection current of 50 mA.