磁性Fe_3O_4-聚吡咯纳米微球的合成与表征

报道了具有核壳结构的Fe3O4 聚吡咯磁性纳米微球的合成方法和表征结果 .微球同时具有导电性和磁性能 .在优化的实验条件下 ,可得到饱和磁化强度为 2 3 4emu g ,矫顽力为 45 2Oe的磁性微球 .微球的导电性随着微球中Fe3O4含量的增加而下降 .微球的磁性能则随着Fe3O4含量的增加而增大 .Fe3O4磁流体的粒径和磁性聚吡咯微球的粒径均在纳米量级 .纳米Fe3O4粒子能够提高复合物的热性能 .实验表明 ,磁流体和聚吡咯之间存在着一定的相互作用 ,正是这种相互作用使磁性聚吡咯纳米微球的热稳定性提高 .     

超顺磁性高分子微球的制备与表征

用化学共沉淀方法制备了Fe3O4纳米微粒,并用油酸(十八烯酸)和十二烷基苯磺酸钠为双层表面活性剂进行表面修饰,制备了稳定的水分散性纳米Fe3O4可聚合磁流体.在Fe3O4磁流体存在下,将苯乙烯与甲基丙烯酸通过乳液聚合方法制备了磁性高分子微球.透射电镜研究表明,Fe3O4微粒的平均粒径在10nm左右,乳液聚合形成的磁性高分子微球的粒径平均约为130nm;用超导量子干涉仪对微粒及高分子微球进行了磁性表征,结果表明,合成的Fe3O4纳米微粒以及磁性高分子微球均具有超顺磁性.同时,还用红外光谱及X射线衍射表征了磁性高分子微球的化学成分和晶体结构.用热失重方法测得磁性高分子微球中磁性物质的含量为23.6%.     

无皂种子乳液聚合制备含稀土磁性荧光微球及其表征

以FeCl3·6H2O和FeCl2·4H2O为原料,通过化学共沉淀方法制备Fe3O4磁性纳米粒子,用油酸和十一烯酸钠对纳米粒子进行双重改性,得到固含量为4%的稳定水基磁流体.在该磁流体存在下,以苯乙烯和甲基丙烯酸缩水甘油酯为单体进行无皂乳液聚合,制备出磁性种子微球;在种子磁性微球存在下,以对苯乙烯磺酸钠,稀土配合物等为功能单体,通过无皂种子乳液聚合法制备磁性荧光微球,该微球表现出优异的磁学性能以及荧光性能.用傅立叶红外光谱仪、透射电子显微镜、X射线衍射仪、振动样品磁强计、荧光分光光度计对磁性荧光微球结构形貌以及磁性荧光性能表征.测试结果表明,所制备的种子微球以及磁性荧光微球呈良好的单分散性,Z均粒径分别为147 nm和228 nm,热重分析表明磁性荧光微球中Fe3O4的含量为4.7%,与之对应的饱和磁化强度为0.396 emu/g,在595 nm和619 nm处观测到Eu3+的特征发射光谱.     

分散聚合法制备液相芯片聚苯乙烯磁性复合微球的研究

本文将丙烯酸基磁流体均匀分散到苯乙烯单体中,采用分散聚合法制备出了适于构建液相芯片微球载体的单分散性微米级磁性微球.考察了丙烯酸基磁流体预处理时间、加料顺序和单体量对微球形貌和粒径分布的影响及其条件优化.扫描电镜(SEM)显示磁性微球平均粒径为7.77 μm,具有良好的单分散性(多分散指数PDI为1.03),并且表面光滑致密;用超导量子干涉磁强计测量了Fe3O4纳米粒子的磁化曲线;用红外光谱(FT-IR)和热失重(TG)方法表征了磁性微球的化学结构及Fe3O4含量.     

控制自由基聚合制备Fe_3O_4/SiO_2/P(AA-MMA-St)磁性复合微球

用原硅酸乙酯对Fe3O4纳米粒子进行表面改性得到Fe3O4/SiO2磁流体.在Fe3O4/SiO2磁流体存在下,以1,1-二苯基乙烯(DPE)为自由基聚合控制剂,利用乳液聚合法制备了Fe3O4/SiO2/P(AA-MMA-St)核-壳磁性复合微球.用红外光谱(FTIR)、振动样品磁强计(VSM)、透射电镜(TEM)、X光电子能谱(XPS)、热重分析(TGA)、示差扫描量热仪(DSC)对所制备的磁流体、磁性高分子复合微球的结构、形态、性能进行了表征.研究发现,原硅酸乙酯水解后能在Fe3O4表面形成硅膜保护层从而避免Fe3O4的酸蚀,使Fe3O4/SiO2/P(AA-MMA-St)复合微球的比饱和磁化强度比同样条件下制备的Fe3O4/P(AA-MMA-St)微球提高了28%;DPE能有效控制自由基在Fe3O4/SiO2磁流体表面均匀地引发单体聚合,得到平均粒径为422 nm,无机粒子含量为40%,比饱和磁化强度为34.850 emu/g,表面羧基含量为0.176 mmol/g的磁性复合微球.     

P(St-GMA)/Fe3O4磁性聚合物微球的制备及表征

采用沉淀法制备了Fe3O4纳米粒子, 以苯乙烯(St)、甲基丙烯酸缩水甘油酯(GMA)为聚合单体, 使用分散聚合法制备了P(St-GMA)/Fe3O4磁性聚合物微球. 分析了Fe3O4粒子的形貌和结构. 研究了制备条件对磁性聚合物微球磁含量的影响. 采用FTIR, XRD, TG及TEM等手段对磁性聚合物微球的微观结构及形貌、磁含量等进行了分析表征. 研究结果表明, 制备的磁性聚合物微球粒径均一, 磁含量高达74%.     

SiO_2表面包覆对Fe_3O_4磁性微球性能的影响

采用化学共沉淀法制备Fe3O4磁性纳米粒子;用柠檬酸钠进行表面修饰得到在水相中稳定分散的Fe3O4溶胶。以Fe3O4磁性纳米粒子为种子,用碱催化正硅酸四乙酯水解、缩合制备了粒径和磁性可控的核壳结构的Fe3O4@SiO2复合微球。通过FT-IR,XRD,TEM,VSM和古埃磁天平对Fe3O4@SiO2复合微球进行表征。研究了SiO2包覆对Fe3O4@SiO2复合微球性能的影响。     

两亲磁性高分子微球的合成与表征

在Fe3O4磁流体存在下 ,通过苯乙烯与聚氧乙烯大分子单体 (MPEO)分散共聚制备两亲磁性高分子微球 .研究了聚氧乙烯大分子单体对微球粒径的影响 .用扫描电子显微镜 (SEM)、原子力显微镜 (AFM)表征了磁性微球的粒径、表面形貌以及表面粗糙度 ,用傅立叶红外光谱 (FTIR)鉴定了共聚物的结构 .随着聚合物中聚氧乙烯大分子单体含量的增加 ,微球表面的粗糙度增加 ,通过改变共聚物中MPEO的含量 ,可以得到含有 0 4～ 3 5mg g羟值的两亲磁性高分子微球     

高Fe_3O_4含量单分散P(St/AA)复合微球的合成与表征

在表面由十一烯酸和油酸共同修饰的Fe3O4磁流体存在下,以苯乙烯(St)和丙烯酸(AA)为共聚单体,用细乳液聚合法,制备了单分散,高Fe3O4含量,且表面带有羧基的超顺磁性高分子复合微球.采用透射电镜(TEM),热重分析(TGA),物性测量系统(PPMS),Zeta电位以及红外光谱等手段对磁性复合微球的各项性能进行表征.结果表明,Fe3O4粒子的表面改性是影响复合微球Fe3O4含量及形貌的关键因素.在优化的实验条件下,可以制得Fe3O4含量高达77wt%,平均粒径为137·9nm,表面羧基密度0·0894mmol/g,比饱和磁化强度为44·7emu/g的单分散超顺磁性高分子复合微球.     

3-氨基丙醇调控合成超顺磁四氧化三铁微球

采用乙二醇为溶剂,无水FeCl3为铁源,聚丙烯酸为稳定剂,通过改变3-氨基丙醇的用量,合成了一系列不同微球直径和晶粒大小的超顺磁Fe3O4微球。高分辨率透射电镜和X-射线衍射分析证实所得产物为Fe3O4,红外光谱和热重分析表明,微球表面成功包覆聚丙烯酸。微球的大小和组成微球的颗粒粒径分别用透射电镜和X-射线衍射分析,结果表明,所得微球的直径随着3-氨基丙醇的用量增加而减小,组成微球的颗粒粒径随着3-氨基丙醇的用量增加而增大。磁性测试表明所制备微球室温下具有良好的超顺磁性。该制备方法步骤简单,可望用于其他无机氧化物纳米微球或颗粒的制备。     

Micelle-assisted one-pot synthesis of water-soluble polyaniline-gold composite particles

A micelle-based method to synthesize dispersed polyaniline (PANI)-Au composite particles by direct oxidation of aniline using AuCl4- as the oxidant is presented. The obtained composite particles have a core-shell structure, where Au nanoparticles of 20 nm mean diameter are encapsulated by PANI of well-defined tetrahedron shape with 150 nm average edge length. The polaron band of the dispersed PANI-Au composite particles is centered at 745 nm and is rather narrow compared to the broad 835 nm absorption of PANI synthesized by the IUPAC procedure. The surface plasmon absorption of Au nanoparticles normally centered at around 520 nm is absent in the composite particles with oxidized PANI. Our results point to a strong electronic interaction between the encapsulated Au nanoparticles and the shell of oxidized PANI. Films and pellets produced from these composite particles show a twofold higher conductivity than IUPAC PANI.     

尺寸可控的聚苯胺复合微球的电纺制备与表征

以十二烷基苯磺酸(DBSA)掺杂的导电聚苯胺与聚乙二醇(PEG)及Fe3O4的混合氯仿溶液,采用静电纺丝(spinning technology)方法制备含Fe3O4纳米颗粒的导电聚苯胺(PANI)/PEG/Fe3O4复合微球.SEM结果表明,电纺所得的PANI/PEG/Fe3O4复合微球结构依赖于PEG聚合物浓度、静...     

导电聚苯胺与磁性CoFe2O4纳米复合物的合成及其电磁性能

在利用HNO3处理CoFe2O4磁性纳米粒子使其表面离子化、分散性得到改善的基础上, 采用苯胺在其表面原位聚合, 制备了具有电磁功能的聚苯胺(PANI)/CoFe2O4纳米复合物. 借助TEM、XRD、FT-IR、四探针电导率仪和VSM(振动样品磁强计)等分析手段研究了复合物的形貌、结构及其电磁性能. 结果表明, CoFe2O4以25 nm左右的粒子分散于聚苯胺基体中, 被其完全包覆, CoFe2O4与PANI之间存在化学键合作用; 复合物同时具有电性能和磁性能, 其导电率随CoFe2O4含量增加而降低, 饱和磁化强度随之升高, 而矫顽力在所研究的范围内则先增大而后又减小, 且均高于CoFe2O4的矫顽力.     

复合Fe2O3纳米粒子的高分子微球的结构表征

近年来，复合有机、无机粒子的高分子微球及其特殊性质越来越引起人们的兴趣与关注［1］．获得有机、无机复合微球的方法很多，如在无机粒子存在下的乳液或无皂乳液聚会[2，3]，通过可聚合的表面活性剂在粒子表面形成胶囊化层[4]以及共沉淀法等[5]．这些无机粒子包括氧化钛、氧化铁、氧化铝及氧化硅等．Haga等[6]增发现包覆在聚合物粒子中的CdS与其本体的光电性质不同；单分散的聚合物微球可以在基片上被组装成二维乃至三维有序的结构[7]．这为信息存储、立体印刷等领域提供了新途径．因此，将无机粒子与聚合物复合成为功能化粒子是一项有…     

Magnetite nanoparticles with tunable gold or silver shell

Fe3O4 nanoparticles with size approximately 13 nm have been prepared successfully in aqueous micellar medium at approximately 80 degrees C. To make Fe3O4 nanoparticles resistant to surface poisoning a new route is developed for coating Fe3O4 nanoparticles with noble metals such as gold or silver as shell. The shell thickness of the core-shell particles becomes tunable through the adjustment of the ratio of the constituents. Thus, the route yields well-defined core-shell structures of size from 18 to 30 nm with varying proportion of Fe3O4 to the noble metal precursor salts. These magnetic nanoparticles were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), FTIR, differential scanning calorimetry (DSC), Raman and temperature-dependent magnetic studies.     

Encapsulation of superparamagnetic Fe3O4@SiO2 core/shell nanoparticles in MnO2 microflowers with high surface areas

Microflowers made of interconnected MnO₂ nanosheets have been successfully synthesized in a microwave reactor through a hydrothermal reduction of KMnO₄ with aqueous HCI at elevated temperatures in the presence of superparamagnetic Fe₃O₄SiO₂ core-shell nanoparticles.Due to the chemical compatibility between SiO₂ and MnO₂,the heterogeneous reaction leads to the spontaneous encapsulation of the Fe₃O₄@SiO₂ core-shell nanoparticles in the MnO₂ microflowers.The resulting hybrid particles exhibit multiple properties including high surface area associated with the MnO₂nanosheets and superparamagnetism originated from the Fe₃O₄@SiO₂ core-shell nanoparticles.which are beneficial for applications requiring both high surface area and magnetic separation.     

TiO_2聚苯胺复合膜的光电化学

利用电化学方法制备了TiO2 聚苯胺 (PANI)复合膜 .该膜具有比TiO2 或PANI膜更宽的吸收谱区 ,并且不同于利用聚苯胺光敏化的TiO2 膜 ,表现为两者复合材料膜的性质 .扫描电镜图表明 ,TiO2 微粒不完全覆盖着PANI膜 .根据TiO2 微粒光电流谱带的阈值能可得复盖在部分氧化态聚苯胺膜上的TiO2 微粒的禁带宽度为 3.0eV .部分氧化态聚苯胺膜的光电流谱遵循Fowler定律 ( 1/2 ～hυ成线性 ) .通过Fowler图得出部分氧化态聚苯胺的绝缘母体禁带宽度为 3.33eV ,并证实该绝缘母体为还原态聚苯胺 .从Mott Schottky图得到在 0 .0 5mol/LK3Fe(CN) 6 /K4 Fe(CN) 6 溶液中 (pH =8.52 )部分氧化态聚苯胺的平带电位为 0 .13V ,掺杂浓度为 5.3× 10 18cm- 3;TiO2 PANI复合膜的平带电位为 - 0 .6 5V ,掺杂浓度为 9.1× 10 19cm- 3.解释了TiO2 PANI复合膜的光电化学过程并描绘出其能带图 .利用TiO2 PANI复合膜能够有效地光降解苯酚溶液 .     

Controlled synthesis and size-dependent thermal conductivity of Fe3O4 magnetic nanofluids

The effect of nanoparticle size (4~44 nm) on the thermal conductivities of heat transfer oils has been systematically examined using iron oxide nanoparticles. Such Fe(3)O(4) nanoparticles were synthesized by a simple one-pot pyrolysis method. The size (16~44 nm), shape and assembly patterns of monodisperse Fe(3)O(4) nanoparticles were modulated by only controlling the amount of Fe(acac)(3). After the as-prepared Fe(3)O(4) NPs were dispersed in heat transfer oils, the prepared magnetic nanofluids exhibit higher thermal conductivity than heat transfer oils, and the enhanced values increase with a decrease in particle size. In addition, the viscosities of all nanofliuids are remarkably lower than that of the base fluid, which has been found for the first time in the nanofluid field. The promising features offer potential application in thermal energy engineering.     

Monodispersed core-shell Fe3O4@Au nanoparticles

The ability to synthesize and assemble monodispersed core-shell nanoparticles is important for exploring the unique properties of nanoscale core, shell, or their combinations in technological applications. This paper describes findings of an investigation of the synthesis and assembly of core (Fe(3)O(4))-shell (Au) nanoparticles with high monodispersity. Fe(3)O(4) nanoparticles of selected sizes were used as seeding materials for the reduction of gold precursors to produce gold-coated Fe(3)O(4) nanoparticles (Fe(3)O(4)@Au). Experimental data from both physical and chemical determinations of the changes in particle size, surface plasmon resonance optical band, core-shell composition, surface reactivity, and magnetic properties have confirmed the formation of the core-shell nanostructure. The interfacial reactivity of a combination of ligand-exchanging and interparticle cross-linking was exploited for molecularly mediated thin film assembly of the core-shell nanoparticles. The SQUID data reveal a decrease in magnetization and blocking temperature and an increase in coercivity for Fe(3)O(4)@Au, reflecting the decreased coupling of the magnetic moments as a result of the increased interparticle spacing by both gold and capping shells. Implications of the findings to the design of interfacial reactivities via core-shell nanocomposites for magnetic, catalytic, and biological applications are also briefly discussed.