Ca2+ Responsive Microgel-Stabilized Pickering Emulsions

As an ionic cross-linker that can change the size of poly(N-isopropylacrylamide-co-acrylic acid) microgel, Ca²⁺ is applied as a trigger to demulsify microgel-stabilized oil/water Pickering emulsions. The influence of Ca²⁺ induced intra-particle ionic cross-linking and inter-particle aggregation on the stability of microgel-stablized “Pickering” emulsion is described. At low and mediate concentration of Ca²⁺, ionic cross-linking can change the internal elasticity of the microgel, and cause the coarsening of the oil droplets. At high concentration of Ca²⁺, microgels flocculate due to the salt out effect and the emulsion is destabilized. This work provide a facile method to control the stability of the Pickering emulsions at ambient condition.     

Pure Protein Scaffolds from Pickering High Internal Phase Emulsion Template

The formation of hierarchical porous protein scaffolds from oil‐in‐water (o/w) high internal phase emulsions (HIPEs) stabilized by bovine serum albumin (BSA) protein nanoparticles (Pickering HIPE) is reported. The route consists of three principal steps. First, a stable o/w HIPE stabilized by BSA protein nanoparticles is formulated. Next, crosslinking the dispersed protein nanoparticles gives rise to a gel in the continuous water phase to freeze the emulsion's microstructure. Finally, removal of the oil components and water directly leads to a three dimensional, bimodal meso‐macroporous protein scaffold, which is suitable for a wide range of biomedical applications.     

Pickering emulsions: Versatility of colloidal particles and recent applications

The versatility of colloidal particles endows the particle stabilized or Pickering emulsions with unique features and can potentially enable the fabrication of a wide variety of derived materials. We review the evolution and breakthroughs in the research on the use of colloidal particles for the stabilization of Pickering emulsions in recent years for the particle categories of inorganic particles, polymer-based particles, and food-grade particles. Moreover, based on the latest works, several emulsions stabilized by the featured particles and their derived functional materials, including enzyme immobilized emulsifiers for interfacial catalysis, 2D colloidal materials stabilized emulsions as templates for porous materials, and Pickering emulsions as adjuvant formulations, are also summarized. Finally, we point out the gaps in the current research on the applications of Pickering emulsions and suggest future directions for the design of particulate stabilizers and preparation methods for Pickering emulsions and their derived materials.     

Fabrication of macroporous foam and microspheres of polystyrene by Pickering emulsion polymerization

Poly(styrene-co-methacrylic acid) (PS-co-MAA) particles were synthesized via surfactant-free emulsion polymerization and then used as particulate emulsifiers for preparation of Pickering emulsions. Our results showed that adjusting the solution pH can tune the wettability of PS-co-MAA particles to stabilize either water-in-oil (W/O) or oil-in-water (O/W) Pickering emulsions. Stable W/O emulsions were obtained with PS-co-MAA particles at low pH values due to their better affinity to the dispersed oil phase. In contrast, increasing the pH value significantly changed the stabilizing behavior of the PS-co-MAA particles, leading to the phase inversion and formation of stable O/W emulsions. We found that the oil/water ratio had a significant influence on pH value of the phase inversion. It decreased with decreasing the oil/water ratio, and no phase inversion occurred when the styrene volume fraction reduced to 10 %. Additionally, macroporous polystyrene (PS) foam and PS microspheres were obtained via polymerization of Pickering high internal phase emulsion (Pickering HIPE) and O/W Pickering emulsion, respectively.     

Biocompatible and pH‐Responsive Colloidal Surfactants with Tunable Shape for Controlled Interfacial Curvature

Molecular‐surfactant‐stabilized emulsions are susceptible to coalescence and Ostwald ripening. Amphiphilic particles, which have a much stronger anchoring strength at the interface, could effectively alleviate these problems to form stable Pickering emulsions. Herein, we describe a versatile method to fabricate biocompatible amphiphilic dimer particles through controlled coprecipitation and phase separation. The dimer particles consist of a hydrophobic PLA bulb and a hydrophilic shellac–PEG bulb, thus resembling nonionic molecular surfactants. The size and diameter ratio of the dimer particles are readily tunable, providing flexible control over the water/oil interfacial curvature and thus the type of emulsion. The particle‐stabilized emulsions were stable for a long period of time and could be destabilized through a pH‐triggered response. The biocompatible amphiphilic dimer particles with tunable morphology and functionality are thus ideal colloidal surfactants for various applications.     

Synthesis of Dual‐Stimuli‐Responsive Microcontainers with Two Payloads in Different Storage Spaces for Preprogrammable Release

Stimuli‐responsive microcontainers have become a major topic of interest, from fundamental aspects to applications in materials science. However, microcontainers that enable the loading of multiple species and programmable release are mostly unexplored. Herein, we describe the design and synthesis of a dual‐responsive organic/inorganic hybrid microcontainer with two payloads in separate storage spaces that is formed by the rapid UV‐initiated polymerization of Pickering emulsions. The stellate mesopore silica nanoparticles with poly(N ‐isopropylacrylamide) grafted inside the mesopores were loaded with one compound (Nile red) and used as Pickering emulsifiers to stabilize oil‐in‐water droplets. Upon UV irradiation, pH‐responsive monomers were polymerized in the presence of 5(6)‐carboxyfluorescein diacetate (CFDA) to form hybrid colloidal microcontainers. The release of Nile red and CFDA could be selectively activated by changing the temperature or pH value.     

Hydrophilic polymer foams with well‐defined open‐cell structure prepared from pickering high internal phase emulsions

Open‐cell hydrophilic polymer foams are prepared through oil‐in‐water Pickering high internal phase emulsions (HIPEs). The Pickering HIPEs are stabilized by commercial titania (TiO₂) nanoparticles with adding small amounts of non‐ionic surfactant Tween85. The morphologies, such as average void diameter and interconnectivity, of the foams can be tailored easily by varying the TiO₂ nanoparticles and Tween85 concentrations. Further, investigation of the HIPE stability, emulsion structure and the location of TiO₂ nanoparticles in resulting foams shows that the surfactant tends to occupy the oil‐water interface at the contact point of adjacent droplets, where the interconnecting pores are hence likely to be formed after the consolidation of the continuous phase. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Pickering emulsions stabilized by anatase nanoparticles

Abstract  

Oil-in-water emulsions can be stabilized by solid particles. These so-called Pickering emulsions are regularly used in many technological applications. Here we describe the efficiency of sol–gel-synthesized anatase nanoparticles with a diameter of 6 nm in stabilizing emulsions. Key parameters were the surface charge of the particles—depending on pH and salt concentration—and their contact angle—depending on the surface groups and the polarity of the oil phase. The effect of these properties on the stability of the emulsions was investigated. The sol–gel nanoparticles were most efficient in stabilizing emulsions at pH 3 (depending on the salt and particle concentration). Highly apolar oil phases (cyclohexane, n-hexane) were required to obtain stable emulsions with the investigated system and addition of salt or hydrophobic coupling molecules in the oil phase, such as long alkyl chain containing phosphonates, increased the stability of the emulsions.     

Preparation and characterization of pH‐responsive and thermoresponsive hybrid microgel particles with gold nanorods

We report on pH‐responsive and thermoresponsive hybrid materials based on the assembly of gold nanorods, Au NRs, into multiresponsive, crosslinked copolymer microgel particles. These microgel particles were prepared by the surfactant‐free emulsion polymerization of N‐isopropylacrylamide and acrylic acid using N, N′‐methylene bis‐acrylamide as a crosslinker, which produces particles measuring approximately 160 nm that are interconnected to one other. Cetyltrimethyl ammonium bromide‐stabilized Au NRs were also prepared independently using a seed‐mediated growth method and then loaded into swollen, deprotonated, acrylic acid‐containing microgel particles using the electrostatic interactions between the oppositely charged particles. Transmission electron micrographs of the as‐prepared hybrid Au NR–microgel particles confirmed that the Au NRs were attached to the surface of the microgel particles. The size‐dependent temperature‐responsive characteristics of the hybrid microgel particles were studied by dynamic light scattering, and it was found that as the temperature increased across the phase transition temperature, the particle size decreased to 56% of the original volume. The thermoresponsive and pH‐responsive optical properties of the hybrid microgel particles were also systematically investigated. The thermo‐ and pH‐induced shrinkage of the microgel led to an increase in the UV–vis absorption intensity and caused a significant blue shift in the longitudinal surface plasmon bands of the Au NRs. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

High internal phase Pickering emulsions

Macroemulsions rendered stable by adsorbed colloidal particles are termed Pickering emulsions. If the volume fraction of dispersed phase exceeds around 0.75, the emulsions are named high internal phase Pickering emulsions abbreviated to HIPPEs, which present new properties and potential applications. We review here the recent progress in preparing and studying HIPPEs of both oil-in-water and water-in-oil types. This includes discussion of the range of solid particle emulsifiers, the choice of the two immiscible liquids and methods for their preparation. As a result of their high interfacial area and long-term stability, HIPPEs are being put to use in many potential applications including drug delivery, catalysis, and in the production of novel porous materials.     

Reversible Assembly of Microgels by Metallo‐Supramolecular Chemistry

The combination of supramolecular chemistry and soft colloids as microgels represents an ambitious way to develop multi‐versatile colloidal assemblies. Hereafter, terpyridine‐functionalized poly(N‐isopropylacrylamide) (PNiPAM) microgel building blocks are shown to undergo an assemble–freeze–disassemble process. The microgel assemblies, which are controlled by monitoring the attractive and repulsive potentials between the soft colloidal particles, are then frozen by forming inter‐particle metal–terpyridine bis‐complexes upon addition of the metallic cation (such as Fe^II, Co^II). By oxidation of the metal–terpyridine bis‐complex links, the aggregates open up, which is due to the complex dissociation releasing the connected particles in the form of single microgels. We extended our work to the development of 1D filaments and 2D membranes materials made of soft particles connected via supramolecular chemistry.     

Polyester nanoparticles by non‐aqueous emulsion polycondensation

A versatile non‐aqueous emulsion polycondensation process for the mild fabrication of polyester nanoparticles is presented. Spherical nanoparticles with diameters smaller than 60 nm are prepared in non‐aqueous emulsion systems. These emulsions consisted in one case of DMF dispersed in n‐hexane and in a second with acetonitrile dispersed in a continuous cyclohexane phase. Stabilization of these systems was achieved by using a polyisoprene‐polymethylmethacrylate block copolymer. The suitability of these aprotic emulsions for synthesizing polyester nanoparticles by emulsion polycondensation having molecular weights up to 22,000 g/mol is demonstrated. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1101–1108, 2007     

Determination of triazole pesticide residues in edible oils using air‐assisted liquid–liquid microextraction followed by gas chromatography with flame ionization detection

In the present study, a rapid, simple, and highly efficient sample preparation method based on air‐assisted liquid–liquid microextraction followed by gas chromatography with flame ionization detection was developed for the extraction, preconcentration, and determination of five triazole pesticides (penconazole, hexaconazole, diniconazole, tebuconazole, and triticonazole) in edible oils. Initially, the oil samples were diluted with hexane and a few microliter of a less soluble organic solvent (extraction solvent) in hexane was added. To form fine and dispersed extraction solvent droplets, the mixture of oil sample solution and extraction solvent is repeatedly aspirated and dispersed with a syringe. Under the optimum extraction conditions, the method showed low limits of detection and quantification between 2.2–6.1 and 7.3–20 μg/L, respectively. Enrichment factors and extraction recoveries were in the ranges of 71–96 and 71–96%, respectively. The relative standard deviations for the extraction of 100 and 250 μg/L of each pesticide were less than 5% for intraday (n = 6) and interday (n = 3) precisions. Finally edible oil samples were successfully analyzed using the proposed method, and hexaconazole was found in grape seed oil.     

Particle self-assembly at ionic liquid-based interfaces

This review presents an overview of the nature of ionic liquid (IL)-based interfaces and self-assembled particle morphologies of IL-in-water, oil- and water-in-IL, and novel IL-in-IL Pickering emulsions with emphasis on their unique phenomena, by means of experimental and computational studies. In IL-in-water Pickering emulsions, particles formed monolayers at ionic liquid–water interfaces and were close-packed on fully covered emulsion droplets or aggregated on partially covered droplets. Interestingly, other than equilibrating at the ionic liquid–water interfaces, microparticles with certain surface chemistries were extracted into the ionic liquid phase with a high efficiency. These experimental findings were supported by potential of mean force calculations, which showed large energy drops as hydrophobic particles crossed the interface into the IL phase. In the oil- and water-in-IL Pickering emulsions, microparticles with acidic surface chemistries formed monolayer bridges between the internal phase droplets rather than residing at the oil/water–ionic liquid interfaces, a significant deviation from traditional Pickering emulsion morphology. Molecular dynamics simulations revealed aspects of the mechanism behind this bridging phenomenon, including the role of the droplet phase, surface chemistry, and inter-particle film. Novel IL-in-IL Pickering emulsions exhibited an array of self-assembled morphologies including the previously observed particle absorption and bridging phenomena. The appearance of these morphologies depended on the particle surface chemistry as well as the ILs used. The incorporation of particle self-assembly with ionic liquid science allows for new applications at the intersection of these two fields, and have the potential to be numerous due to the tunability of the ionic liquids and particles incorporated, as well as the particle morphology by combining certain groups of particle surface chemistry, IL type (protic or aprotic), and whether oil or water is incorporated.     

Simultaneous determination of 17 phthalate esters in edible vegetable oils by GC‐MS with silica/PSA‐mixed solid‐phase extraction

A quantified method for the determination of 17 phthalate esters (PAEs) in edible vegetable oil by GC‐MS with the pretreatment of acetonitrile extraction and silica/N‐(n‐Propyl)ethylenediamine‐mixed SPE column was established. By the quantification of internal standard of D₄‐di(2‐ethylhexyl) phthalate, a good linearity range of related 17 PAEs was observed. The correlation coefficient was ranged at 0.994～1.000, and the standard lowest quantified level was 0.05～0.15 mg/L. The spiking recoveries of 17 PAEs were 78.3～108.9% with the relative standard deviations of 4.3～12.1% (n = 6). The method detection limits were 0.1～0.2 mg/kg. Meanwhile, PAEs were determined in 30 plastic buckets of edible vegetable oil from supermarkets in Hangzhou city of China. The survey of 30 oil samples showed di(2‐ethylhexyl) phthalate (DEHP) had the 100% (30/30) detection rate. The levels of diisobutyl phthalate with 86.7% (26:30), di‐n‐butyl phthalate (DBP) with 70% (21:30) and diethyl phthalate with 10% (3:30) were detected. It was worth note that DBP with 16.7% (5:30) samples and DEHP with 10% (3:30) samples were beyond the regular migrating limit, which indicated that more attention should be paid to the PAEs in oil with plastic package.     

Sustainable food-grade Pickering emulsions stabilized by plant-based particles

This review summarizes the major advances that have occurred over the last 5 years in the use of plant-based colloidal particles for the stabilization of oil-in-water and water-in-oil emulsions. We consider the characteristics of polysaccharide-based particles, protein-based particles and organic crystals (flavonoids) with respect to their particle size, degree of aggregation, anisotropy, hydrophobicity and electrical charge. Specific effects of processing on particle functionality are identified. Special emphasis is directed towards the issue of correctly defining the stabilization mechanism to distinguish those cases where the particles are acting as genuine Pickering stabilizers, through direct monolayer adsorption at the liquid–liquid interface, from those cases where the particles are predominantly behaving as ‘structuring agents’ between droplets without necessarily adsorbing at the interface, for example, in many so-called high internal phase Pickering emulsions. Finally, we consider the outlook for future research activity in the field of Pickering emulsions for food applications.     

Synthesis of snowman‐like polymer‐silica asymmetric particles by combination of hydrolytic condensation process with γ‐ray radiation initiated seeded emulsion polymerization

We report on a facile route to synthesize snowman‐like asymmetric composite particles via γ‐ray initiated seeded emulsion polymerization after a hydrolytic condensation process on the surface of second monomer swollen poly(styrene‐divinylbenzene‐acrylic acid) seeds. Effects of the amounts and kinds of second monomer and inorganic precursor, different radiation polymerization conditions including dose rates and absorbed doses on the morphology of the obtained particles were investigated. The obtained asymmetric particles can serve as ideal solid surfactants to stabilize the water‐in‐oil emulsions, and soap‐free hierarchical materials were obtained by polymerization of monomers in water or oil phase. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 339–348     

pH‐triggerable and ultraviolet‐triggerable β‐cyclodextrin microgel

β‐Cyclodextrin (βCD) microgels were prepared water in oil emulsion, and cinnamic acid (CA) was loaded in the microgel by inclusion complexation. The specific loading of CA in the microgel was 0.0203 mg/mg, and it was less than that the calculated specific loading (0.0368 mg/mg). The maximum swelling ratio of CA‐loaded βCD microgel (CAβCD microgel) decreased from 233.9% to 225.7% upon the irradiation of ultraviolet light (λ = 365 nm). And the 5(6)‐carboxyfluorescein release of CAβCD microgel, observed for 12 h, was suppressed upon the irradiation of ultraviolet light, possibly because the microgel can be photocross‐linked, and its mass transfer resistance against dye diffusion would increase. The swelling ratio of CAβCD microgel somewhat depended on the pH value of the medium, possibly because electrostatic repulsion can be developed within the microgel by the ionizable carboxylic group of CA. The 5(6)‐carboxyfluorescein release degree in 12 h of CAβCD microgel increased from 10.5% to 85.1% when the pH value increased from 3.0 to pH 9.0. This is mainly because CA is more soluble at a higher pH value. In the full range of pH value tested, the release degrees of CAβCD microgel were slightly higher than those of βCD microgel, possibly because of the electrostatic repulsion developed within the CAβCD microgel. Copyright © 2014 John Wiley & Sons, Ltd.     

Preparation of novel suspensions of ZnO/living block copolymer latex nanoparticles via pickering emulsion polymerization and their long term stability

In this work, we present the first Pickering emulsion polymerization with a controlled/living character. Pickering emulsion polymerization in the presence of a novel suspension of zinc oxide/poly(sodium 4‐styrenesulfonate) (ZnO/PSS^?) nanocomposite particles was applied to prepare ZnO/living block copolymer latexes. In the emulsion system, 1,1‐diphenylethene (DPE)‐controlled radical polymerization of poly(methyl methacrylate)‐b‐poly(butyl acrylate) (PMMA‐b‐PBA) was proceeded in oil phase. The nanocomposite particles of ZnO/PSS^? with an average diameter of 20 nm and negatively charged zeta potential around ?30 mV were synthesized via hydrothermal method then served as an effective emulsion stabilizer at the oil/water interface. Living polymerization was carried out using DPE‐capped PMMA as the macroinitiator and PMMA‐b‐PBA block copolymer latex was successfully prepared with coverage of ZnO/PSS^? nanoparticles. Narrow size distributions of the droplets as well as latex particles were obtained, and the livingness of block copolymers was comparable to that of emulsions stabilized by conventional surfactants. The controlled/living character in Pickering emulsion polymerization was slightly influenced by the amount of PSS^? immobilized into the ZnO/PSS^? nanoparticles, whereas it was significantly influenced by the weight ratios between ZnO/PSS^? and oil phase. The Pickering latexes showed excellent long term stability against either coalescence or sedimentation over several months. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Preparation of remarkably tough polyHIPE materials via polymerization of oil‐in‐water HIPEs involving 1‐vinyl‐5‐aminotetrazole

Interconnected microcellular polymeric monoliths having unexpected high mechanical strength have been prepared using the high internal phase emulsion (HIPE) methodology. Oil‐in water concentrated emulsions of aqueous 1‐vinyl‐5‐amino [1,2,3,4]tetrazole (1‐VAT) mixed with a low molar ratio (7%) of N,N′‐methylenebisacrylamide as crosslinking agent were prepared using dodecane as dispersed phase and a mixture of hydrophilic surfactants. “Reverse” polyHIPE materials were obtained after radical copolymerization, solvent extraction, and drying. Their morphology, chemical composition, and physicochemical behavior are discussed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2942–2947, 2010