Flexible Hierarchical TiO2/Fe2O3 Composite Membrane with High Separation Efficiency for Surfactant‐Stabilized Oil‐Water Emulsions

Globally, efficient oil‐water separation for surfactant‐stabilized oil‐water emulsions has been in urgent demand. The current options available for separation are neither sustainable nor resistant to fouling. Herein, we introduce a hierarchically nanostructured TiO₂/Fe₂O₃ composite membrane, which is capable of separating surfactant‐stabilized oil‐water emulsions with high separation efficiency. The high oil rejection rate is contributed by the acquisition of an interconnected delicate network and underwater superoleophobic interface. Meanwhile, its self‐cleaning function promote the facile recovery of the contaminated membrane. Furthermore, the mechanical flexible characteristic of the TiO₂/Fe₂O₃ composite membrane widens its applicability in industrial employment. Thanks to these properties, this novel membrane can be considered as a practical option for treating surfactant‐stabilized oil‐water emulsions.     

Photoanode Based on Chain‐Shaped Anatase TiO2 Nanorods for High‐Efficiency Dye‐Sensitized Solar Cells

Anatase TiO₂ nanorods with large specific surface areas and high crystallinity have been synthesized by surfactant‐free hydrothermal treatment of water‐soluble peroxotitanium acid (PTA). X‐ray diffraction and TEM analysis showed that all TiO₂ nanorods derived from PTA in different hydrothermal processes were in the anatase phase, and high aspect ratio TiO₂ nanorods with chain‐shaped structures were formed at 150 °C for 24 h by oriented growth. The nanorods were fabricated as photoanodes for high‐efficiency dye‐sensitized solar cells (DSSCs). DSSCs fabricated from the chain‐shaped TiO₂ nanorods gave a highest short‐circuit current density of 14.8 mA cm^?2 and a maximum energy conversion efficiency of 7.28 %, as a result of the presence of far fewer surface defects and grain boundaries than are present in commercial P25 TiO₂ nanoparticles. Electrochemical impedance spectroscopy also confirmed that DSSCs based on the TiO₂ nanorods have enhanced electron transport properties and a long electron lifetime.     

Growth of lightly crosslinked PHEMA brushes and capsule formation using pickering emulsion interface‐initiated ATRP

In this work, growth of lightly crosslinked poly(2‐hydroxyethyl methacrylate) (PHEMA) brushes and subsequent capsule formation using Pickering emulsion interface‐initiated atom transfer radical polymerization (PEII‐ATRP) were investigated. Initiator‐immobilized silica nanoparticles (2.5 initiators/nm²) assembled at the interface of paraffin oil‐in‐water emulsions and ultimately stable Pickering emulsions were formed. PEII‐ATRP was conducted in the water phase of Pickering emulsions from the part of the surfaces of initiator‐immobilized silica nanoparticles exposed to water by using copper(I) chloride/bipyridine as catalyst at 35 °C. As PHEMA has a character of lightly crosslinking when the polymerization occurs in water, novel hybrid capsules (“colloidosomes”) can be obtained and were observed by confocal laser scanning microscope (CLSM) and optical microscopy (OM). The semipermeability of the resultant hollow capsules was demonstrated by the diffusion of 1‐phenylazo‐2‐naphthol. Meanwhile, the conformation of PHEMA chains can be varied in different solvents, which affects the semipermeability of these hybrid hollow capsules. We expect these hollow capsules can be further utilized to develop microdevices for drugs or cells delivery. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1354–1367, 2009     

Polymerized pickering HIPEs: Effects of synthesis parameters on porous structure

A polyHIPE is a highly porous polymer synthesized from monomers within the external phase of a high internal phase emulsion (HIPE). The large amount of difficult to remove surfactant needed for HIPE stabilization can affect the properties of the resulting polymer. A Pickering emulsion is a surfactant‐free emulsion stabilized by solid particles that preferentially migrate to the interface. In this article, the synthesis of crosslinked polyacrylate polyHIPEs based on Pickering HIPEs stabilized using silane‐modified silica nanoparticles is described and the effects of the synthesis parameters on the porous structure are discussed. The silane chemistry, silane content, and nanoparticle content had significant effects on the size of the polyhedral, relatively closed‐cell polyHIPE voids that resulted from aqueous‐phase initiation. Increasing the mixing intensity reduced the wall thickness and produced a more open‐cell structure. The locus of initiation had a significant effect on polyHIPE morphology. Organic‐phase initiation yielded larger, more spherical voids from the more extensive coalescence before the structure could be “locked‐in” at the gel point. Most significantly, the nanoparticles were located within the polymer walls rather than at the interface, as might be expected. The void walls were shown to be an assembly of nanoparticle agglomerate shells that become embedded within the polymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1516–1525, 2010     

Pure Protein Scaffolds from Pickering High Internal Phase Emulsion Template

The formation of hierarchical porous protein scaffolds from oil‐in‐water (o/w) high internal phase emulsions (HIPEs) stabilized by bovine serum albumin (BSA) protein nanoparticles (Pickering HIPE) is reported. The route consists of three principal steps. First, a stable o/w HIPE stabilized by BSA protein nanoparticles is formulated. Next, crosslinking the dispersed protein nanoparticles gives rise to a gel in the continuous water phase to freeze the emulsion's microstructure. Finally, removal of the oil components and water directly leads to a three dimensional, bimodal meso‐macroporous protein scaffold, which is suitable for a wide range of biomedical applications.     

High‐Internal‐Phase Pickering Emulsions Stabilized Solely by Peanut‐Protein‐Isolate Microgel Particles with Multiple Potential Applications

High‐internal‐phase Pickering emulsions have various applications in materials science. However, the biocompatibility and biodegradability of inorganic or synthetic stabilizers limit their applications. Herein, we describe high‐internal‐phase Pickering emulsions with 87 % edible oil or 88 % n‐hexane in water stabilized by peanut‐protein‐isolate microgel particles. These dispersed phase fractions are the highest in all known food‐grade Pickering emulsions. The protein‐based microgel particles are in different aggregate states depending on the pH value. The emulsions can be utilized for multiple potential applications simply by changing the internal‐phase composition. A substitute for partially hydrogenated vegetable oils is obtained when the internal phase is an edible oil. If the internal phase is n‐hexane, the emulsion can be used as a template to produce porous materials, which are advantageous for tissue engineering.     

Synthesis and Catalytic Performance of Hierarchically Porous MIL‐100(Fe)@polyHIPE Hybrid Membranes

Metal‐organic frameworks (MOFs) nanoparticles in combination with a nonionic surfactant (Pluronic L‐121) are used to stabilize dicyclopentadiene (DCPD)‐in‐water high internal phase emulsions (HIPEs). The resulting HIPEs containing the MIL‐100(Fe) nanoparticles (MIL: Materials of Institut Lavoisier) at the interface between the oil‐ and the water‐phases are then cured, and 100 μm thick, fully open, hierarchically porous hybrid membranes are obtained. The properties of the MIL‐100(Fe)@pDCPD polyHIPE membranes are characterized and it is found that up to 14 wt% of the MIL‐100(Fe) nanoparticles are incorporated in the hybrid material resulting in an increase of the microporosity up to 130 m² g⁻¹. Hybrid membranes show an appealing catalytic activity in Friedel–Crafts alkylation in a batch mode as well as in a flow‐through mode, thereby demonstrating the preserved accessibility of Lewis acidic sites in the MOF nanostructures.

     

Carbon nanotubes in emulsion‐templated porous polymers: Polymer nanoparticles,sulfonation, and conductivity

Sulfonated polymers are of interest for ion exchange resins, reaction supports, and membranes for separation, filtration, fuel cells, and electrochemical devices. Sulfonic groups have been introduced into polystyrene (PS) through exposure to sulfuric acid, and carbon nanotubes (CNTs) have been added to polymers to enhance proton conductivity without creating an electronic percolation pathway. PolyHIPEs, emulsion‐templated porous polymers with highly interconnected hierarchical open‐cell porous structures, are synthesized through polymerization in the external phases of high internal phase emulsions (HIPEs). In this article, the synthesis of PS‐based CNT‐filled polyHIPEs, their structure, sulfonation, and conductivity are described. Adding CNT dispersions to the HIPEs produced polymer nanoparticle–covered polyHIPEs from polymerization within the water‐soluble surfactant micelles in the internal aqueous phase droplets. The CNTs migrated from the HIPE's aqueous phase droplets into the HIPE's organic phase and formed interconnected bundles within the polyHIPE walls, reflecting a reduction in the surfactant's ability to disperse the CNTs. The water adsorption in the hygroscopic sulfonated polyHIPEs increased the conductivity by several orders of magnitude. The conductivity of the sulfonated polyHIPE containing CNTs was more than an order of magnitude greater than that of the sulfonated polyHIPEs with no CNTs. The CNTs act as “bridges,” enhancing the connection between existing conductive pathways. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4369–4377     

Photocatalytic and magnetic titanium dioxide/polystyrene/magnetite composite hybrid polymer particles

Novel multifunctional titanium dioxide (TiO₂)/polystyrene/magnetite composite hybrid polymer particle dispersions with TiO₂ nanoparticles in the surface and magnetite nanoparticles encapsulated inside the polymer matrix were produced by Pickering miniemulsion polymerization in one single step. Whereas TiO₂ nanoparticles were used to impart photocatalytic functionality and colloidal stability, magnetite nanoparticles were incorporated to allow an easy extraction for recovery and reuse of the composite multifunctional particles. The morphology of the composite particles was assessed by scanning transition electron microscopy (STEM) and energy‐dispersive X‐ray spectroscopy (EDX). The paramagnetism of the particles was analyzed using a SQUID magnetometer and their photocatalytic activity was assessed by degrading methylene blue (MB) solutions under UV light and by recovering and reusing of the particles in five consecutive cycles. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3350–3356     

Assembly of a Metal–Organic Framework into 3 D Hierarchical Porous Monoliths Using a Pickering High Internal Phase Emulsion Template

3D Hierarchical porous metal–organic framework (MOF) monoliths are prepared by using Pickering high internal phase emulsion (HIPE) template. Pickering HIPEs were stabilized solely by UiO‐66 MOF particles with internal phase up to 90 % of the volume. The effects of internal phase type and volume, as well as MOF particle concentration on the stability of resulting Pickering HIPEs were investigated. Furthermore, by adding small amount of polyvinyl alcohol (PVA) as binder or polymerization in the continuous aqueous phase, followed by freeze‐drying, two types of MOF‐based 3D hierarchical porous monoliths with ultralow density (as low as 12 mg cm^?3) were successfully prepared. This Pickering HIPE template approach provides a facile and practical way for assembling of MOFs into complex structures.     

Novel antimicrobial polyethylene composites prepared by metallocenic in situ polymerization with TiO2‐based nanoparticles

Polyethylene (PE) composites with titanium oxide (TiO₂) nanoparticles were produced via in situ polymerization representing a novel route to obtain antimicrobial polymeric materials. The TiO₂ nanoparticles synthesized by the sol–gel method were used either as‐synthesized or modified organically with hexadecyltrimethoxysilane (Mod‐TiO₂). These particles were added, together with the catalytic system (formed by a metallocenic catalyst and methylaluminoxane as cocatalyst), directly to the reactor, yielding in situ PE composites with 2 and 8 wt % content of nanofiller. The catalytic polymerization activity presented a slight decrease with the incorporation of the TiO₂ and Mod‐TiO₂ nanoparticles compared to polymerization without filler. Regarding the properties of the composites, crystallinity increased slightly when the different nanofillers were added, and the elastic modulus increased around 15% compared to neat PE. PE/TiO₂ nanocomposites containing 8 wt % of TiO₂ exposed to UVA irradiations presented antimicrobial activity against Escherichia coli. The PE/Mod‐TiO₂ nanocomposite with 8 wt % filler killed 99.99% of E. coli, regardless of light and time irradiation. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Fabrication of durable superhydrophobic nanofibrous filters for oil‐water separation using three novel modified nanoparticles (ZnO‐NSPO,AlOO‐NSPO,and TiO2‐NSPO)

Three reusable and durable superhydrophobic nanofibrous filters were prepared by dip coating the nanofibrous fabric in the three different dispersed solutions of the newly modified nanoparticles (ZnO‐NSPO, AlOO‐NSPO, and titanium dioxide [TiO₂]‐NSPO). The contact angle results proved that the TiO₂‐NSPO coated nanofibrous polyacrylonitrile (PAN) filter was hydrophobic with the water contact angle (WCA) of 141° while the ZnO‐NSPO and AlOO‐NSPO coated nanofibrous PAN filters were superhydrophobic with the WCA of 168° and 152°, respectively. The as‐prepared filters can be utilized as an effective martial for oil‐water separation with separation efficiency of over 98%.     

Laccase behavior in the microenvironment of water core within a biosurfactant‐based reversed micelles system rhamnolipid/n‐hexanol/isooctane/water

Compared with synthetic surfactants (cetyltrimethyl ammonium bromide, sodium bis(2‐ethylhexyl) sulfosuccinate and Tween‐80), the properties of the aqueous core as well as the microenvironment behavior were investigated in water‐in‐oil microemulsions, which are formed by water and biosurfactant rhamnolipid (RL) in the solvent of isooctane/n‐hexanol (1:1, v/v). Besides, as a typical substrate of lignocellulose, guaiacol was used to detect the laccase activity in reversed micelles (RMs). The results were eventually confirmed that RL‐based RM system has higher solubilization ability, more friendly environmental compatibility and milder reaction microenvironment than the others. In this study, triangle phase diagram of surfactant/n‐hexanol/isooctane/water was constructed to analyze the variation of phase behavior between each RM system. For the RL‐based RM system, the effect of the molar ratio of water to surfactant (ω₀) on enzyme hydrolytic activity was also determined to be shown as a bell‐shaped curve and presented a maximum at ω₀ = 19; the O―H stretching vibrations of water in aqueous core was also studied by analyzing the IR spectrum over the region of 3050–3750 cm ^{? 1}. Moreover, kinetic studies showed that the catalytic efficiency of the laccase in RL‐based RM system was lower than in aqueous solution. Nevertheless, the RM system obtained the highest hydrolysis rate at RL concentration of 1.0CMC, which is 0.055 mM. Copyright © 2015 John Wiley & Sons, Ltd.     

Self‐assembly of polymer‐coated ferromagnetic nanoparticles into mesoscopic polymer chains

The self‐assembly of dispersed polymer‐coated ferromagnetic nanoparticles into micron‐sized one‐dimensional mesostructures at a liquid–liquid interface was reported. When polystyrene‐coated Co nanoparticles (19 nm) are driven to an oil/water interface under zero‐field conditions, long (≈ 5 μm) chain‐like assemblies spontaneously form because of dipolar associations between the ferromagnetic nanoparticles. Direct imaging of the magnetic assembly process was achieved using a recently developed platform consisting of a biphasic oil/water system in which the oil phase was flash‐cured within 1 s upon ultraviolet light exposure. The nanoparticle assemblies embedded in the crosslinked phase were then imaged using atomic force microscopy. The effects of time, temperature, and colloid concentration on the self‐assembly process of dipolar nanoparticles were then investigated. Variation of either assembly time t or temperature T was found to be an interchangeable effect in the 1D organization process. Because of the dependence of chain length on the assembly conditions, we observed striking similarities between 1D nanoparticle self‐assembly and polymerization of small molecule monomers. This is the first in‐depth study of the parameters affecting the self‐assembly of dispersed, dipolar nanoparticles into extended mesostructures in the absence of a magnetic field. © 2008 Wiley Periodicals, Inc.* J Polym Sci Part B: Polym Phys 46: 2267–2277, 2008     

Preparation of novel suspensions of ZnO/living block copolymer latex nanoparticles via pickering emulsion polymerization and their long term stability

In this work, we present the first Pickering emulsion polymerization with a controlled/living character. Pickering emulsion polymerization in the presence of a novel suspension of zinc oxide/poly(sodium 4‐styrenesulfonate) (ZnO/PSS^?) nanocomposite particles was applied to prepare ZnO/living block copolymer latexes. In the emulsion system, 1,1‐diphenylethene (DPE)‐controlled radical polymerization of poly(methyl methacrylate)‐b‐poly(butyl acrylate) (PMMA‐b‐PBA) was proceeded in oil phase. The nanocomposite particles of ZnO/PSS^? with an average diameter of 20 nm and negatively charged zeta potential around ?30 mV were synthesized via hydrothermal method then served as an effective emulsion stabilizer at the oil/water interface. Living polymerization was carried out using DPE‐capped PMMA as the macroinitiator and PMMA‐b‐PBA block copolymer latex was successfully prepared with coverage of ZnO/PSS^? nanoparticles. Narrow size distributions of the droplets as well as latex particles were obtained, and the livingness of block copolymers was comparable to that of emulsions stabilized by conventional surfactants. The controlled/living character in Pickering emulsion polymerization was slightly influenced by the amount of PSS^? immobilized into the ZnO/PSS^? nanoparticles, whereas it was significantly influenced by the weight ratios between ZnO/PSS^? and oil phase. The Pickering latexes showed excellent long term stability against either coalescence or sedimentation over several months. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of oily core‐hybrid shell nanocapsules through interfacial free radical copolymerization in miniemulsion: Droplet formation and nucleation

Nanocapsules with an oily core and an organic/inorganic hybrid shell were elaborated by miniemulsion (co)polymerization of styrene, divinylbenzene, γ‐methacryloyloxy propyl trimethoxysilane, and N‐isopropyl acrylamide. The hybrid copolymer shell membrane was formed by polymerization‐induced phase separation at the interface of the oily nanodroplets with water. It was shown that the size, size distribution, and colloidal stability of the miniemulsion droplets were extremely dependent on the nature of the oil phase, the monomer content and the surfactant concentration. The less water‐soluble the hydrocarbon template and the higher the monomer content, the better the droplet stability. The successful formation of nanocapsules with the targeted core‐shell morphology (i.e., a liquid core surrounded by a solid shell) was evidenced by cryogenic transmission electron microscopy. Both nanocapsules and nanoparticles were produced by polymerization of the miniemulsion droplets. The proportion of nanoparticles increased with increasing monomer concentration in the oil phase. These undesirable nanoparticles were presumably formed by homogeneous nucleation as we showed that micellar nucleation could be neglected under our experimental conditions even for high surfactant concentrations. The introduction of γ‐methacryloyloxy propyl trimethoxysilane was considered to be the main reason for homogeneous nucleation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 593–603, 2010     

Mechanistic study of nanoparticles–surfactant foam flow in etched glass micro-models

This study was conducted in order to identify the pore-level mechanisms controlling the nanoparticles–surfactant foams flow process and residual oil mobilization in etched glass micro-models. The dominant mechanism of foam propagation and residual oil mobilization in water-wet system was identified as lamellae division and emulsification of oil, respectively. There was inter-bubble trapping of oil and water, lamellae detaching and collapsing of SDS-foam in the presence of oil in water-wet system and in oil-wet system. The dominant mechanisms of nanoparticles–surfactant foam flow and residual oil mobilization in oil-wet system were the generation of pore spanning continuous gas foam. The identified mechanisms were independent of pore geometry. The SiO₂-SDS and Al₂O₃-SDS foams propagate successfully in water-wet and oil-wet systems; foam coalescence was prevented during film stretching due to the adsorption and accumulation of the nanoparticles at the gas–liquid interface of the foam, which increased the films’ interfacial viscoelasticity.     

埃洛石纳米管稳定的Pickering高内相乳液模板制备大孔聚合泡沫吸附分离三氟氯氰菊酯

利用天然粘土埃洛石纳米管和少量非离子表面活性剂吐温80为乳化剂构建了水包油（O/W）型Pickering高内相乳液（HIPEs）,并以其为模板制备了大孔聚合泡沫（MPFs）。MPFs具有开口的大孔结构、丰富的内部交联孔道和亲水的表面,且在水中呈悬浮状态,这些特点均有利于吸附水体系中的菊酯类农药。结合静态吸附实验研究了MPFs吸附三氟氯氰菊酯的平衡与动力学行为。结果表明,准一级动力学方程与Langmuir等温方程分别较好地拟合了吸附动力学与平衡数据（相关性系数（R²）>0.99）,证明了吸附过程是一个单分子层的化学吸附过程。298 K时MPFs对三氟氯氰菊酯的吸附平衡时间和饱和吸附容量分别为240 min和23.98 μmol·g^-1,且吸附容量随着温度与三氟氯氰菊酯初始浓度的升高而逐渐增大。研究证明了水中呈悬浮状态的MPFs是理想和稳定的吸附剂,可有效去除水溶液中疏水性有机污染物。     

粒子与聚合物协同稳定高内相Pickering乳液

选用二氧化硅纳米粒子(H30)和聚(乳酸-羟基乙酸)共聚物(PLGA)为复合稳定剂, 成功制备出内相体积分数高达90%的高内相Pickering 乳液. 对照实验表明: 单独用H30粒子作稳定剂, 内相体积分数上限为75%; 单独用PLGA 作稳定剂, 发生严重相分离, 不能形成乳液. 无机纳米粒子与聚合物之间的协同作用在制备高内相乳液的过程中起到了关键作用. 因此, 使用无机粒子和聚合物作为混合稳定剂制备高内相乳液是一种新型而有效的方法.     

Thermodynamic‐Dependent Size‐Selection of ZnSe Nanoparticles in Amphiphilic Triblock Copolymer Systems

ZnSe colloidal nanoparticles prepared by the air‐insensitive starting reagents, zinc chloride and selenium powder, have been size‐selected in the Pluronic amphiphilic triblock copolymer [(EO)_x(PO)_y(EO)_x] systems. The size‐selection mechanism between the ZnSe nanoparticles and the triblock copolymers systems is a thermodynamic‐dependent effect. We observe that nanoparticles with special volume (Vs) are trapped first by the triblock copolymers due to the faster entropic depletion interaction arising from the addition of surfactant‐template (micelles) to colloidal nanoparticles. On the other hand, nanoparticles with sizes larger or smaller than Vs will not interact with the surfactant‐templates. They either precipitate quickly by gravity (larger than Vs) or still retain their thermal motion in the aqueous phase (smaller than Vs) when Vs nanoparticles are caught by the surfactant‐templates.