大比表面积铈锆氧化物固溶体的制备

采用共沉淀法制备铈、锆氧化物固溶体.发现以适当配比的(NH4)HCO3和NH3*H2O混合溶液作为沉淀剂,同时控制沉淀过成中的反应条件,所得到的沉淀在较低的温度(400 ℃)下焙烧即可形成铈、锆氧化物固溶体.该固溶体具有较大的比表面积和高的储氧能力.形成沉淀后添加适量表面活性剂,可进一步提高产品的比表面积而对其还原行为和储氧性能几乎无影响.对制得的氧化物以X-射线衍射、程序升温还原、氧的脉冲滴定和液氮物理吸附等方法进行了表征.     

铋杂对Ce-Zr固溶体储氧性能稳定性的影响

以Ce(NO3)3·6H2O,ZrO(NO3)2·2H2O和Bi(NO3)3·5H2O为原料,氨水为沉淀剂,双氧水为氧化剂,在pH值为9.5～10.5条件下,采用氧化共沉淀法制备了不同比例组成的复合氧化物Ce1-x-yZrxBiyOσ.通过XRD,BET和Raman表征可知,该法制备的样品550 ℃焙烧后均可形成固溶体,当x0.15,y0.2时,高温焙烧后易分相.H2-TPR和CO脉冲测试结果显示Ce0.65Zr0.15Bi0.2Oσ较易被还原,且1050℃焙烧4 h后储氧量仍可达625 μmol·(g cat)-1,这是由于Bi3+取代了Ce0.65Zr0.15Bi0.2Oσ中部分Ce4+和Zr4+形成氧空位,增强了体相晶格氧的移动性,从而使Ce0.65Zr0.15Bi0.2Oσ固溶体中的Ce4+和Bi3+同时被还原.     

铋掺杂对Ce-Zr固溶体储氧性能稳定性的影响

以Ce(NO3)3.6H2O,ZrO(NO3)2.2H2O和Bi(NO3)3.5H2O为原料,氨水为沉淀剂,双氧水为氧化剂,在pH值为9.5~10.5条件下,采用氧化共沉淀法制备了不同比例组成的复合氧化物Ce1-x-yZrxBiyOσ。通过XRD,BET和Raman表征可知,该法制备的样品550℃焙烧后均可形成固溶体,当x0.15,y0.2时,高温焙烧后易分相。H2-TPR和CO脉冲测试结果显示Ce0.65Zr0.15Bi0.2Oσ较易被还原,且1050℃焙烧4 h后储氧量仍可达625μmo.l(g cat)-1,这是由于Bi3+取代了Ce0.65Zr0.15Bi0.2Oσ中部分Ce4+和Zr4+形成氧空位,增强了体相晶格氧的移动性,从而使Ce0.65Zr0.15Bi0.2Oσ固溶体中的Ce4+和Bi3+同时被还原。     

掺杂Mn对CeO2-ZrO2-Al2O3材料性质的影响

采用共沉淀法制备了一系列Mn掺杂摩尔分数为0～5%的CeO2-ZrO2-Al2O3(CZA)复合氧化物, 并采用BET, OSC, XRD, XPS, H2-TPR等方法对所制备的材料进行了表征. 结果表明, 所制备的材料均形成了稳定的CZA固溶体, 尤其是Mn掺杂0.5%的材料在600和1000 ℃焙烧后均表现出最好的织构性能. OSC和H2-TPR的结果表明, Mn掺杂量≤1%时, 氧在材料中的体相移动是材料储氧和被还原的速控步骤, 并且Mn的掺杂量为0.2%时, 储氧量最大, 材料的还原温度也最低; Mn掺杂量>1%时, Mn物种对材料储氧和被还原的作用显著. XPS结果表明, Mn在焙烧过程中会迁移向表面, 结合H2-TPR结果可知, 新鲜样品表面的MnOx物种主要为Mn2O3, 而老化样品主要为Mn3O4.     

还原热处理对铈锆铝复合氧化物性能的影响

采用共沉淀法制备铈锆铝复合氧化物(CeO2-ZrO2-Al2O3,CZA)和铈锆复合氧化物(CeO2-ZrO2,CZ),将样品分别在空气和10%H2/Ar气氛下进行热处理,利用X射线粉末衍射(XRD)、O2脉冲吸附、H2程序升温还原(H2-TPR)等手段研究了复合氧化物的结构及性能.结果表明:CZA样品经950℃还原热处理后出现CeAlO3晶相,热处理温度越高,越有利于CeAlO3物相生成.CZA储氧量(OSC)随着还原热处理温度升高逐渐增大,至900℃达到1270.3μmo·lg-1;温度继续升高,OSC减小,1100℃还原热处理后CZA的OSC仅为23.2μmo·lg-1.研究发现还原热处理中形成CeAlO3,其显著影响CZA样品的储氧性能和还原性能.     

不同沉淀剂对Co3O4催化剂催化分解N2O活性的影响

采用了不同沉淀剂（K2 CO3、Na2 CO3、NaOH、NaHCO3）制备了一系列 Co3 O4氧化物催化剂。通过 XRD、XPS、BET、H2-TPR、O2-TPD 表征手段,探究了催化剂物相结构和氧化还原性能对 N2 O 催化分解性能的影响。研究表明,以 K2 CO3为沉淀剂制备的 Co3 O4催化剂具有优越的氧化还原性能。此外,较低结晶度有助于提高催化剂的催化性能,催化剂表面物种与其沉淀剂相关：丰富的表面 Co 物种促进催化活性,较多氧空位有利于催化剂表面的电子传递和氧气的脱附。以 K2 CO3为沉淀剂制备的 Co3 O4催化剂表现出最佳的 N2 O 催化分解活性,在450℃达到90％以上的转化率。     

沉淀剂对铜锰复合氧化物变换催化剂构效的影响

以CuSO4.5H2O和MnSO4.H2O为原料,KOH和NaOH为沉淀剂制备了铜锰复合氧化物,考察了其变换反应催化性能,利用XRD、低温氮气吸附法、TG、H2-TPR等对所合成样品进行了表征。以KOH和NaOH为沉淀剂所得沉淀终产物的物相组成和织构明显不同,分别为层状结构碱式硫酸铜Cu4SO4(OH)6.H2O及无定形锰氧化物和Cu2+1O和Mn3O4混合物。两种物相组成和织构完全不同的沉淀终产物焙烧后都生成Cu1.5Mn1.5O4固熔体,在变换反应条件下均转化为Cu和MnO,但其催化性能却有明显差异。以NaOH为沉淀剂,得到以Cu2+1O和Mn3O4复合体为主的沉淀终产物,焙烧及还原后保持了较高的织构稳定性,提高了样品的活性和热稳定性。而以KOH为沉淀剂得到以层状结构碱式硫酸铜Cu4SO4(OH)6.H2O和无定形锰氧化物为主的沉淀终产物,在焙烧过程发生的演变极其复杂,削弱了铜锰组分协同效应,造成其活性和热稳定性极差。研究结果表明,NaOH作沉淀剂所制备样品的织构稳定性、催化活性显著高于以KOH作沉淀剂所制备样品,且热稳定性良好。     

沉淀剂种类对Ru/CeO2氨合成催化剂结构和性能的影响

采用6种沉淀剂通过共沉淀法制备了6种Ru/CeO2氨合成催化剂, 考察了沉淀剂种类对其氨合成性能的影响. 通过X射线衍射、N2吸附-脱附、X射线荧光光谱和H2程序升温还原等表征手段, 对不同沉淀剂影响Ru/CeO2催化剂氨合成性能的原因进行探讨. 结果表明: 采用(NH4)2CO3和NH4HCO3制备的催化剂样品具有较好的氨合成活性, 其中NH4HCO3为最佳沉淀剂, 所制备的催化剂在450 ℃, 10 MPa , 10000 h－1测试条件下, 出口氨浓度为14.46%. 而采用KHCO3, KOH, K2CO3沉淀剂制备的样品的氨合成活性相对较低. 沉淀剂种类不仅明显地影响钌离子和铈离子的共沉淀, 而且会影响载体二氧化铈表面氧的还原. 由NH4HCO3沉淀剂制备的Ru/CeO2催化剂的高活性归因于钌负载量增大、钌粒子分散度提高以及二氧化铈表面氧易还原三者相互作用的结果.     

La1-x-yBaxREyMnO3复合氧化物的制备及其对甲烷燃烧的催化性能

 以Na2CO3·10H2O和NaOH混合碱为沉淀剂,采用共沉淀法制备了钙钛矿型结构的La1-x-yBaxREyMnO3(RE=Dy或Y)复合氧化物超细粒子. 该复合氧化物超细粒子具有较大的比表面积和良好的热稳定性(经700和1000 ℃焙烧后,其比表面积仍分别可达到47.0和16.9 m2/g). 随着LaMnO3中的La3+被Ba2+及稀土离子Dy3+或Y3+部分取代后,样品显示出良好的热稳定性及对甲烷燃烧的高催化活性.     

不同沉淀剂对Co_3O_4催化剂结构及催化分解N_2O活性的影响

采用了不同沉淀剂(K_2CO_3、Na_2CO_3、NaOH、NaHCO_3)制备了一系列Co_3O_4氧化物催化剂.通过XRD、XPS、BET、H2-TPR、O_2-TPD表征手段,探究了催化剂物相结构和氧化还原性能对N_2O催化分解性能的影响.研究表明,以K_2CO_3为沉淀剂制备的Co_3O_4催化剂具有优越的氧化还原性能.此外,较低结晶度有助于提高催化剂的催化性能,催化剂表面物种与其沉淀剂相关:丰富的表面Co物种促进催化活性,较多氧空位有利于催化剂表面的电子传递和氧气的脱附.以K_2CO_3为沉淀剂制备的Co_3O_4催化剂表现出最佳的N_2O催化分解活性,在450℃达到90%以上的转化率.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.