Easy to optimize: dynamic combinatorial libraries of metal-dye complexes as flexible sensors for tripeptides

A dynamic combinatorial library (DCL) of dye complexes of Cu2+ and Ni2+ was used to sense the sequence isomeric tripeptides His-Gly-Gly, Gly-His-Gly, and Gly-Gly-His. The DCL sensor was obtained by mixing buffered aqueous solution of three commercially available dyes together with CuCl2 and NiCl2. The addition of the peptide analytes resulted in characteristic changes in the UV-vis spectrum of the mixture, which allowed the identification of the peptide. Due to the modular nature of the sensor, it was possible to optimize the sensor by variation of the amounts and ratio of its constituent building blocks. The composition of the best sensor was found to vary substantially, depending on the sensing problem to be addressed. Whereas a Cu2+/Ni2+ ratio of 1:3 gave the best differentiation for Gly-His-Gly and Gly-Gly-His, a sensor containing exclusively Cu2+ was found to provide the best discrimination between His-Gly-Gly and Gly-Gly-His.     

Adsorption of Copper-Amino Acid Complexes on the Surface of Highly Dispersed Silica

The adsorption of the copper ions and some amino acids on the surface of silica from aqueous solutions is interpreted in terms of the surface complexation model. The stability constants of ternary surface complexes, in which silanol groups of silica act as one of the ligands, are determined. It is shown that the values of the constants of the binding of amino acid anions to copper ions on the surface are changed in accordance with a series of increasing hydrophobicity of substituents in the side chains of amino acids.     

Exploring the use of the tripeptide Gly-Gly-his as a selective recognition element for the fabrication of electrochemical copper sensors

The modification of electrodes with the tripeptide Gly-Gly-His for the detection of copper in water samples is described in detail. The tripeptide modified electrode was prepared by first self-assembling 3-mercaptopropionic acid (MPA) onto the gold electrode followed by covalent attachment of the tripeptide to the self-assembled monolayer using carbodiimide coupling. The electrodes were characterized using electrochemistry, a newly developed mass-spectrometry method and quantum mechanical calculations. The mass spectrometry confirmed the modification to proceed as expected with peptide bonds formed between the carboxylic acids of the MPA and the terminal amine of the peptide. Electrochemical measurements indicated that approximately half the MPA molecules in a SAM are modified with the peptide. The peptide modified electrodes exhibited high sensitivity to copper which is attributed to the stable 4N coordinate complex the peptide formed around the metal ion to give copper the preferred tetragonal coordination. The formation of a 4 coordinate complex was predicted using quantum mechanical calculation and confirmed using mass spectrometry. The adsorption of the copper to the peptide modified electrode was consistent with a Langmuir isotherm with a binding constant of (8.1 +/- 0.4) 10(10) M(-1) at 25 degrees C.     

Tripeptide-modified silicon nanowire based field-effect transistors as real-time copper ion sensors

A highly sensitive and specific copper ion sensor using single crystalline silicon nanowires (SiNWs) configured as field-effect transistors (FETs) is reported. The surface of SiNWs is functionalized with a His-containing tripeptide which serves as a copper sensitive layer. It is found that the complexation between copper ions and His-containing tripeptides leads to an increase in the SiNW conductance, and the position of His residue in the tripeptide plays an important role for the binding of copper ions. Only Gly-Gly-His-modified SiNWs exhibit selectivity for copper ions in the presence of zinc ions whereas Gly-His-Gly-modified SiNWs do not. Our experimental results demonstrate the potential utility of oligopeptide-modified SiNWs as metal ion sensors.     

Adsorption and gas-chromatographic properties of silver-modified silicas

Ag⁰ and Ag(I) nanoparticles are immobilized on the surface of a macroporous silica and amino silica. The adsorption kinetics of a basic dye, methylene blue (MB), from aqueous solutions and the adsorption isotherms of alkyne phenylacetylene from an octane solution are measured. The dependence of the rate constants of MB adsorption on the conditions of immobilization and silver reduction is considered. Silica containing immobilized Ag(I) is shown to have a high adsorption activity with respect to phenyl acetylene. By gas chromatography, it is shown that silver-modified silica has a higher selectivity with respect to alkenes. The reduction of silver on the silica surface and the complexation of silver ions with aminopropyl groups of amino silica lead to a significant decrease in the selectivity of composites.     

Eigen kinetics in surface complexation of aqueous metal ions

The mechanism of chemisorption of aqueous metal ions at surfaces has long been a topical issue in such fields as soil chemistry and bioenvironmental science. Here it is quantitatively demonstrated for the first time that release of water from the inner hydration shell is the rate-limiting step in inner-sphere surface complexation. The reactive intermediate is an outer-sphere complex between metal ion and surface site, with an electrostatically controlled stability defined by Boltzmann statistics. Using tabulated dehydration rate constants for metal ions, the resulting scheme allows for prediction of rates of sorption of aqueous metal ions at any type of complexing surface.     

Preparation of ion-imprinted silica gels functionalized with glycine, diglycine, and triglycine and their adsorption properties for copper ions

We report a new procedure for modifying the surface of silica gels with glycine, diglycine, and triglycine in the presence of copper ions to create a new type of copper-imprinted sorbent, which exhibits a high adsorption capacity and selectivity for copper ions. Our results show that copper adsorbed onto the copper-imprinted silica gel is 50% higher than that on nonimprinted silica gel at pH 4.5. The high adsorption capacity observed for the copper-imprinted silica gel is attributed to the stable copper complexes formed with two adjacent glycine, diglycine, or triglycine molecules with proper intermolecular distances obtained from the ion-imprinting procedure. Another possible reason for the high adsorption capacity is that the ion-imprinting procedure prevents the surface from being overcrowded; therefore, copper ions can form very stable 1:1 complexes with immobilized diglycine or triglycine. Interestingly, the imprinting effect is even more pronounced when the adsorption experiments are conducted in the presence of competing metal ions such as magnesium and calcium. The copper-imprinted silica gel exhibits a higher adsorption capacity than does the nonimprinted silica gel for all pH values, even when the concentrations of magnesium and calcium are 50 and 76 times higher than the concentration of copper.     

Thermodynamics of the complex formation of copper(II) with L-phenylalanine in aqueous ethanol solutions

Constants of the acid dissociation and complexation of L-phenylalanine (HPhe) with copper(II) ions are determined by potentiometry in aqueous ethanol solutions containing 0 to 0.7 molar fraction of alcohol. Changes in the Gibbs energy for the transfer from water to a binary solvent of L-phenylalanine, Phe^? anion, and [CuPhe]⁺ complex are calculated. It is found that the weakening of solvation of the ligand donor groups in solvents with high ethanol contents is accompanied by an increase in the stability of [CuPhe]⁺ complex.     

Stabilization of copper nanoparticles prepared by reduction from solutions of poly(acrylic acid) complexes with Cu2+ ions and poly(ethylene glycols)

Copper sols are prepared via the reduction of copper ions with hydrazine borane in dilute aqueous solutions of mixtures of the PAA-Cu²⁺ complex and poly(ethylene glycols) of various molecular masses at PEG: PAA = 0.25 base-mol/base-mol and PAA: Cu²⁺ = 10 base-mol/mol in the pH range 4.0–7.0. The stability of sols against oxidation (dissolution) or aggregation (enlargement) of metal nanoparticles is much higher than that of sols prepared in the absence of PEG. With an increase in the initial pH or a decrease in the molecular mass of PEG, the formed copper nanoparticles are much larger (no less than 20 nm in diameter) than copper nanoparticles occurring in the sol prepared in a solution of the PAA double complex with Cu²⁺ ions and high-molecular-mass PEG at a low initial pH (3–10 nm in diameter). Copper nanoparticles in sols prepared in solutions of complexes based on the high-molecular-mass PEG do not aggregate during exposure, thereby indicating the high stability of polymer screens on their surfaces.     

The mechanistic studies of the electrochemical in situ association of copper ions with 5, 10, 15, 20-tetraphenyl-21H, 23H-porphyrin

A trace of 5, 10, 15, 20-tetraphenyl-21H, 23H-porphyrin (H₂TPP) was mechanically transferred to the surface of a paraffin-impregnated graphite electrode and associated with copper ions in an aqueous media by electrochemistry. Under different electrochemical conditions, two cases of surface associations of H₂TPP with copper ions are obtained. The formations were characterized by the voltammetry of the immobilized microparticles. According to the different voltammetric behaviors of the two cases of the in situ formed copper porphyrins, the different association mechanisms of the two cases of copper porphyrins were elucidated.     

Removal of U(VI) from aqueous solutions by using MWCNTs and chitosan modified MWCNTs

In this paper, the multiwalled carbon nanotubes (MWCNTs) were modified with chitosan (CS) by using low temperature plasma grafting technique (denoted as MWCNT-CS). The prepared MWCNTs and MWCNT-CS were characterized by SEM, TEM, FTIR and Raman spectroscopy in detail and the results suggested that CS molecules were successfully grafted on the surfaces of MWCNTs. The materials were applied as adsorbents in the removal of U(VI) ions from large volumes of aqueous solutions as a function of environmental conditions. The removal of U(VI) from aqueous solution to MWCNTs and MWCNT-CS increased with increasing pH values at pH < 7, and then decreased with increasing pH values at pH > 7. The sorption of U(VI) on MWCNTs and MWCNT-CS was strongly dependent on pH and independent of ionic strength. The sorption of U(VI) on MWCNTs and MWCNT-CS was dominated by inner-sphere surface complexation rather than by ion exchange or outer-sphere surface complexation. The surface grafted chitosan molecules can enhances U(VI) sorption on MWCNTs obviously, which was also evidenced from the XPS spectroscopy analysis. The results of high sorption capacity of U(VI) on MWCNT-CS suggest that the MWCNT-CS nanomaterial is a suitable candidate in the preconcentration of U(VI) ions from large volumes of aqueous solutions.     

Functional membranes prepared by layer‐by‐layer assembly and its metal ions adsorption property

PVDF/(PEI‐C/PAA)_n functional membranes were prepared by layer‐by‐layer (LbL) assembly, and their heavy metal ions adsorption capability was investigated. The changes in the chemical compositions of membrane surfaces were determined by X‐ray photoelectron spectroscopy (XPS). XPS results show that the surface of the PVDF membrane can be alternatively functionalized by PEI‐C and PAA. The membrane surface hydrophilicity was evaluated through water contact angle measurement. Contact angle results show that the surface hydrophilicity of the membrane surface depends on the outermost deposited layer. Morphological changes of membrane surfaces were observed by scanning electron microscopy (SEM). The water fluxes for these membranes were elevated after modification. The performances of the PVDF/(PEI‐C/PAA)_n membranes on the adsorption of copper ions (Cu²⁺) from aqueous solutions were investigated by inductively coupled plasma (ICP). The results indicate that the PVDF/(PEI‐C/PAA)_n functional membranes show high copper ions adsorption ability. Copyright © 2010 John Wiley & Sons, Ltd.     

Amperometric flow detection with a copper working electrode-response mechanism and application to various compounds

The mechanism of amperometric detection with a copper electrode has been studied with four amino-acids in four different carrier liquids containing aqueous buffer and methanol. It is concluded that the response is produced by complexation of the test substances with cupric ions in the outer, porous layer of the passivating film, with formation of CuL(+) species. The increase in detector current is primarily determined by the complexation kinetics and to a lesser degree by the stability of the complex formed. The complexation rate strongly decreases with increasing amounts of organic solvent in the carrier liquid. The optimal detection conditions are discussed on the basis of the detection mechanism. Results are given for the detection of various structural types of amines and amino-alcohols.     

A methionine-based turn-on chemical sensor for selectively monitoring Hg2+ ions in 100% aqueous solution

Dansyl-labeled methionine is synthesized by solid-phase synthesis, and found to be a highly sensitive and selective sensor for Hg(2+). The sensor sensitively detects Hg(2+) ions in aqueous solution by a turn-on response; however, the sensor detects Hg(2+) ions by a turn-off response in organic and mixed aqueous-organic solutions. We investigated the binding stoichiometry, binding constant, and binding mode of the sensor under various solvent conditions. In 100% aqueous solution, 2 : 1 complexation of the sensor with Hg(2+) ions is more favorable than 1 : 1 complexation, whereas the sensor preferentially forms a 1 : 1 complex in 100% CH(3)CN or in 50% CH(3)CN-aqueous solutions. Results reveal that the stoichiometry of the sensor-Hg(2+) complex plays an important role in the type of response to Hg(2+) ions, and that 2 : 1 complexation is required for a turn-on response to Hg(2+) ions in aqueous solution.     

Impact of environmental conditions on sorption of <Superscript>210</Superscript>Pb(II) to NKF-5 zeolite

The sorption of Pb(II) from aqueous solution using NKF-5 zeolite was investigated by batch technique under ambient conditions. The NKF-5 zeolite sample was characterized by using FTIR and X-ray powder diffraction in detail. The sorption of Pb(II) was investigated as a function of pH, ionic strength, foreign ions, and humic substances. The results indicated that the sorption of Pb(II) on NKF-5 zeolite was strongly dependent on pH. The sorption was dependent on ionic strength at low pH, but independent of ionic strength at high pH. At low pH, the sorption of Pb(II) was dominated by outer-sphere surface complexation and ion exchange with H⁺ on NKF-5 zeolite surfaces, whereas inner-sphere surface complexation was the main sorption mechanism at high pH. From the experimental results, one can conclude that NKF-5 zeolite has good potentialities for cost-effective preconcentration of Pb(II) from large volumes of aqueous solutions.     

Colloidal copper in aqueous solutions: radiation-chemical reduction,mechanism of formation,and properties

Colloidal copper has been obtained by -irradiation of aqueous solutions of copper (II) perchlorate in the presence of alcohol and polyethyleneimine (PEI). The sols are spherical particles about 4 nm in diameter, which are quickly oxidized by oxygen or other oxidants. When Cu^II is not entirely incorporated into the complex with PEI, disproportionation of Cu^I aqua complexes formed affords the metal, along with Cu₂O. Reduction of the PEI complex of Cu^I by hydrated electrons gives only colloidal copper. The copper ions can be reduced on the surface of silver sols. Optical parameters of the resulting bimetallic particles have been studied. The presence of copper ions leads to broadening of the absorption band associated with the silver sols and shifts it to the UV region, which is due to the transfer of electrons from copper to silver. Three copper monolayers are enough to cause plasmon absorption of colloidal copper.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 25–30, January, 1994.     

The Influence of Macrocyclic Tetraamine Immobilization in Langmuir Monolayers on Complex Formation Selectivity

Selective complex formation in Langmuir dicetyl cyclene monolayers on the surface of aqueous solutions of Cu(II), Ni(II), and Zn(II) salts and their mixtures was studied. The effect of selectivity “inversion” of diphilic cyclene immobilized in monolayers on the surface of solutions of a mixture of copper(II) and nickel(II) salts was observed; the inversion was induced by a change in subphase pH. An analysis of the isotherms of monolayer compression and X-ray fluorescence spectra of the corresponding Langmuir-Blodgett films showed that subphase acidification caused a gradual transition from the selective formation of copper-containing macrocyclic complexes to selective complex formation between the ligand and nickel ions. The effect observed was not characteristic of complex formation with similar unsubstituted tetraamines in bulk solution. The phenomenon was interpreted from the point of view of specific conformational transitions of the diphilic macroring in the two-dimensional system organized at the interphase boundary.     

Reversible supramolecular functionalization of surfaces: terpyridine ligands as versatile building blocks for noncovalent architectures

We report on the reversible and selective functionalization of surfaces by utilizing supramolecular building blocks. The reversible formation of terpyridine bis-complexes, based on a terpyridine ligand-functionalized monolayer, is used as a versatile supramolecular binding motif. Thereby, click chemistry was applied to covalently bind an acetylene functionalized Fe(II) bis-complex onto azide-terminated self-assembled monolayers. By decomplexation of the formed supramolecular complex, the ligand modified monolayer could be obtained. These monolayers were subsequently used for additional complexation reactions, resulting in the reversible functionalization of the substrates. The proper choice of the coordinating transition metal ions allows the tuning of the binding strength, as well as the physicochemical properties of the formed complexes and thus an engineering of the surface properties.     

Ternary surface complexes in silica-Ni2+ ions-2,2′-dipyridyl systems

The adsorption of complexes of nickel ions with an organic base (2,2′-dipyridyl) at an interface between silica and an aqueous electrolyte solution has been considered in terms of the theory of complexation. It has been shown that, on the silica surface, ternary complexes are formed, in which nickel ions are bonded to silanol groups. The equilibrium constants of the reactions of ternary surface complex formation have been calculated from the adsorption curves describing the pH dependences of nickel ion and dipyridyl adsorption.     

Electrochemical grafting by reduction of 4-aminoethylbenzenediazonium salt: Application to the immobilization of (bio)molecules

We propose in this study a simple and rapid way to produce stable amino-derivatized conductive surfaces for the subsequent immobilization of (bio)molecules. This was achieved through the use of (4-aminoethyl)benzenediazonium salt (AEBD), which was immobilized on glassy carbon and gold electrodes by its electrochemical reduction. The presence of terminal grafted amino functions was evidenced with XPS by analyzing N1s core level. Besides this conventional surface characterisation, an electrochemical strategy is proposed here to evidence the presence of immobilized amines, in which the chemical reactivity of amines towards 2,4,6-trinitrobenzenesulfonic acid (TNBS) is used. Surface-bound TNBS served as an electrochemical marker and was detected by cyclic voltammetry. Additionally, pre-modified gold electrodes with amino functions can be derivatized with biomolecules such as glutathione (GSH). Glutathione attachment was evidenced by studying the electrochemical behaviour of ferri/ferrocyanide redox before and after its immobilization. The functionalized electrodes were then used for the detection of copper ions in neutral aqueous solutions.