Effect of Metal Ions on the Formation and Properties of Monolayers and Nanosized Langmuir-Blodgett Films Based on Diphilic Aminomethylated Calix[4]resorcinarenes

The behavior of the monolayers of three diphilic aminomethylated calix[4]resorcinarene (CRA) derivatives on the surface of a pure aqueous subphase and subphase containing copper(II), nickel(II), europium(III), terbium(III), and lanthanum(III) ions was investigated. The monolayer transfer to the quartz and single-crystal silicon substrates was accomplished by the Langmuir-Blodgett (LB) technique. The films were studied by ellipsometry and mass-spectrometry. Metal ions were found to exert effect on the limit area per one CRA molecule in the monolayer, on the surface collapse pressure and transfer coefficient of monolayer, and on the thickness and refractive index of the CRA-based LB films.     

Ion-Sensitive Monolayers and Langmuir–Blodgett Films of Amphiphilic Cyclen: Selectivity and Regeneration

Complexation of dicetyl cyclen with transition metal ions in the monolayers on the surface of aqueous solutions of Cu(II), Ni(II), Zn(II), Ag(I) and their mixtures was studied. It was established that the selectivity of the interaction of the monolayer composed of this ligand with transition metal ions is determined by the subphase pH value. It is disclosed that, in the acidic region of subphase pH values, dicetyl cyclen in the monolayer bounds predominantly the Ni(II) ions from solutions containing Cu²⁺ and Ni²⁺ ions, although its complexes with Ni(II) in the bulk under these conditions are less stable than similar complexes with Cu(II). The effect of conformational and charge states of the ligand on the protonation of macrocycle and the stability of its complexes is discussed. The possibility of the reversible regeneration of the monolayers and the Langmuir–Blodgett films of the complexes of dicetyl cyclen and copper(II) ions is shown to occur with no changes in the structure and properties of this planar system. It is shown that the Langmuir–Blodgett films based on dicetyl cyclen can be used as a sensor element for the quantitative analysis of the content of Cu(II) ions in dilute solutions.     

Equilibrium structure and dynamics of (2R, 3R)-(+)-bis(decyloxy)succinic acid at the air-water interface

A twin-tailed, twin-chiral fatty acid, (2R,3R)-(+)-bis(decyloxy)succinic acid was synthesized and its two dimensional behavior at the air-water interface was examined. The pH of the subphase had a profound effect on the monolayer formation. On acidic subphase, stable monolayers with increased area per molecule due to hydrogen bonding and bilayers at collapse pressures were observed. Highly compressible films were formed at 40 degrees C, while stable monolayers with increased area were observed at sub-room temperatures. Langmuir monolayers formed on subphases containing 1 mM ZnCl2 and CaCl2 revealed two dimensional metal complex formation with Zn2+ forming a chelate-type complex, while Ca2+ formed an ionic-type complex. Monolayers transferred from the condensed phase onto hydrophilic Si(100) and quartz substrates revealed the formation of bilayers through transfer-induced monolayer buckling. Compression induced crystallites in 2D from monolayers and vesicle-like supramolecular structures from multilayers were the noted LB film characteristics, adopting optical imaging and electron microscopy. The interfacial monolayer structure studied through molecular dynamics simulation revealed the order and packing at a molecular level; monolayers adsorbed at various simulated specific areas of the molecule corroborated the (pi-A) isotherm and the formation of a hexagonal lattice at the air-water interface.     

Design and interfacial assembly of a new series of gemini amphiphiles with hydrophilic poly(ethyleneamine) spacers

A new series of gemini amphiphiles containing two Schiff base moieties linked by the poly(ethyleneamine) with different lengths were designed, and their interfacial assemblies were investigated. Condensed monolayers were obtained on nearly neutral subphase where the hydrophilic spacers were found to immerse into the subphase. On strong alkaline and acidic subphase, the headgroup and the spacer of the gemini amphiphiles underwent dissociation and protonation, respectively, resulting in the enlargement of the molecular areas. Flat and uniform domains were obtained for the monolayers from nearly neutral subphase; flower-like or dendritic domains were observed for the films transferred from strong acidic subphase. On the other hand, when an anionic tetrakis(4-sulfonatonphenyl)porphine (TPPS) was added into an acidic subphase, an in situ complex formation between the gemini amphiphiles and TPPS occurred. The complex monolayers were transferred onto solid substrate and TPPS existed predominantly as J-aggregate in the complex films. Due to the multisited positive charges in the spacer on acidic subphase, the complex films of gemini amphiphiles with TPPS appeared as short fiber or nanorod structures and formed two-dimensional (2D) conglomerate chiral domains.     

Effects of Calcium Ions on Thermodynamic Properties of Mixed Bilirubin/Cholesterol Monolayers

The mixed monolayer behavior of bilirubin/cholesterol was studied through surface pressure-area (?-A) isotherms on aqueous solutions containing various concentrations of calcium ions. Based on the data of ?-A isotherms, the mean area per molecule, collapse pressure, surface compressibility modulus, excess molecular areas, free energy of mixing, and excess free energy of mixing of the monolayers on different subphases were calculated. The results show an expansion in the structure of the mixed monolayer with Ca2+ in subphase, and non-ideal mixing of the components at the air/water interface is observed with positive deviation from the additivity rule in the excess molecular areas. The miscibility between the components is weakened with the increase of concentration of Ca2+ in subphase. The facts indicate the presence of coordination between Ca2+ and the two components. The mixed monolayer, in which the molar ratio of bilirubin to cholesterol is 3:2, is more stable from a thermodynamic point of view on pure water. But the stable 3:2 stoichiometry complex is destroyed with the increase of the concentration of Ca2+ in subphase. Otherwise, the mixed monolayers have more thermodynamic stability at lower surface pressure on Ca2+ subphase.     

Thermochemistry of complex salts of transition metal perchlorates with tetrazole ligands

The combined use of combustion and solution calorimetry was proposed as a method for determining the standard enthalpy of formation of the complex salts of transition metals, viz., cobalt(II), nickel(II), and zinc, with the organic ligand (5-aminotetrazol-1-yl)acethydrazide. The enthalpies of solution in water and in a 0.1 M solution of hydrochloric acid were measured for the complex salts and ligand. The enthalpy of combustion of the ligand was determined by the combustion calorimetry method, and its standard enthalpy of formation was calculated. The thermochemical cycle was developed for determining the standard enthalpy of formation of the complex salts. The reliable values of the enthalpies of formation of the salts in the standard states were obtained, and the enthalpies of formation of the earlier unknown complex ions were determined.     

Mixed DPPC/DPTAP monolayers at the air/water interface: influence of indolilo-3-acetic acid and selenate ions on the monolayer morphology

The interactions of mixed monolayers of two lipids, zwitterionic 1,2-dipalmitoyl-phosphatidylcholine (DPPC) and positively charged 1,2-dipalmitoyl-3-trimethylammonium-propane (DPTAP), with phytohormone indolilo-3-acetic acid (IAA) and selenate anions in the aqueous subphase were studied. For this purpose, isotherms of the surface pressure versus the mean molecular area were recorded. Domain formation was investigated by using Brewster angle microscopy (BAM). The method of grazing incidence X-ray diffraction (GIXD) was also applied for the characterization of the organization of lipid molecules in condensed monolayers. It was found that selenate ions contribute to monolayer condensation by neutralizing the positive net charge of mixed monolayers whereas IAA molecules penetrated the lipid monolayer, causing its expansion/fluidization. When both solutes were introduced into the subphase, a competition between them for interaction with the positively charged lipids in the monolayer was observed.     

Properties of Spreaded Collagen I Monolayers on the Surface of Aqueous tert-Butanol and n-Hexanol Solutions

Properties of the monolayers of collagen isolated from the sclera of pig's eye are studied at the air–water interface with increasing tert-butanol or n-hexanol concentrations in a subphase. In the case of aqueous n-hexanol solutions, its adsorption on the subphase surface results in the formation of mixed monolayer whose properties depend on n-hexanol concentration in the subphase and the ratio between the number of alcohol and collagen molecules in the monolayer. At higher n-hexanol surface concentration, the phase separation of the monolayer into the domains of the condensed phase of alcohol and fibrous collagen occurs. A decrease in water activity in the presence of tert-butanol leads to a drastic reduction of collagen surface activity. This effect can be explained by both the constrained collagen spreading on the surface of tert-BuOH solutions and adsorption of alcohol molecules on collagen resulting in macromolecule hydrophilization. Alcohol critical concentrations are disclosed above which collagen monolayers are not formed.     

Combined electrostatics and hydrogen bonding determine intermolecular interactions between polyphosphoinositides

Membrane lipids are active contributors to cell function as key mediators in signaling pathways controlling cell functions including inflammation, apoptosis, migration, and proliferation. Recent work on multimolecular lipid structures suggests a critical role for lipid organization in regulating the function of both lipids and proteins. Of particular interest in this context are the polyphosphoinositides (PPI's), especially phosphatidylinositol (4,5) bisphosphate (PIP 2). The cellular functions of PIP 2 are numerous but the organization of PIP 2 in the inner leaflet of the plasma membrane, as well as the factors controlling targeting of PIP 2 to specific proteins, remains poorly understood. To analyze the organization of PIP 2 in a simplified planar system, we used Langmuir monolayers to study the effects of subphase conditions on monolayers of purified naturally derived PIP 2 and other anionic or zwitterionic phospholipids. We report a significant molecular area expanding effect of subphase monovalent salts on PIP 2 at biologically relevant surface densities. This effect is shown to be specific to PIP 2 and independent of subphase pH. Chaotropic agents (e.g., salts, trehalose, urea, temperature) that disrupt water structure and the ability of water to mediate intermolecular hydrogen bonding also specifically expanded PIP 2 monolayers. These results suggest a combination of water-mediated hydrogen bonding and headgroup repulsion in determining the organization of PIP 2, and may contribute to an explanation for the unique functionality of PIP 2 compared to other anionic phospholipids.     

tert-Butylthiacalix[4]arene monolayers as a biomimetic model for the oxidation of antioxidants with cytochrome c

The possibility of designing a model of sensor to antioxidants based on thiacalix[4]arene monolayers with immobilized cytochrome c was shown. The molecular surface area S ₀ of thiacalix[4]arene in the monolayers and the surface pressure coefficient ?dπ/dS (elasticity) reflect changes in the redox state of cytochrome c in the presence of dihydroquercetin and ascorbic acid in the aqueous subphase. The absorption spectra in the visible and UV ranges of solutions of the subphase and transferred thiacalix[4]arene monolayers with immobilized cytochrome c confirm the oxidation of the antioxidants to quinones and formation of the reduced form of cytochrome c.     

Transition from homogeneous Langmuir-Blodgett monolayers to striped bilayers driven by a wetting instability in octadecylsiloxane monolayers

We show that two dips of an oxidized silicon substrate through a prepolymerized n-octadecylsiloxane monolayer at an air-water interface in a rapid succession produces periodic, linear striped patterns in film morphology extending over macroscopic area of the substrate surface. Langmuir monolayers of n-octadecyltrimethoxysilane were prepared at the surface of an acidic subphase (pH 2) maintained at room temperature (22 +/- 2 degrees C) under relative humidities of 50-70%. The substrate was first withdrawn at a high dipping rate from the quiescent aqueous subphase (upstroke) maintained at several surface pressures corresponding to a condensed monolayer state and lowered soon after at the same rate into the monolayer covered subphase (downstroke). The film structure and morphology were characterized using a combination of optical microscopy, imaging ellipsometry, and Fourier transform infrared spectroscopy. An extended striped pattern, perpendicular to the pushing direction of the second stroke, resulted for all surface pressures when the dipping rate exceeded a threshold value of 40 mm min(-1). Below this threshold value, uniform deposition characterizing formation of a bimolecular film was obtained. Under conditions that favored striped deposition during the downstroke through the monolayer-covered interface, we observed a periodic auto-oscillatory behavior of the meniscus. The stripes appear to be formed by a highly correlated reorganization and/or exchange of the first monolayer, mediated by the Langmuir monolayer at the air-water interface. This mechanism appears distinctly different from nanometer scale stripes observed recently in single transfers of phospholipid monolayers maintained near a phase boundary. The stripes further exhibit wettability patterns useful for spatially selective functionalization, as demonstrated by directed adsorptions of an organic dye (fluorescein) and an oil (hexadecane).     

Kinetics of Complexation in the Monolayers of Amphiphilic Dicetylcyclene on the Surface of Aqueous Copper(II) Chloride Solutions

The kinetics of complexation in monolayers of dicetycyclene at the surface of aqueous copper(II) chloride solutions was studied. It was shown that the changes in the phase state of monolayer related to the conformational transitions of macrocycle are responsible for the differences in the rate and binding mechanism of copper ions. It was concluded that the sterically more advantageous (for the coordination with the metal ion) conformation of macrocyclic polyamine is ensured in a monolayer. In addition, it was established that the rate and mechanism of complexation in such monolayers greatly depend on the degree of protonation of ligands, the latter being dependent on the subphase pH. It was also demonstrated that an increase in subphase pH to 7 and higher results in an almost total suppression of metal ion binding due to strong conformational distortion of dicetylcyclene macrocycles in a monolayer and the hydrogen bonding between macrocycles.     

Langmuir monolayer properties of perfluorinated double long-chain salts with divalent counterions of separate electric charge at the air-water interface

The novel perfluorinated double long-chain salts with divalent counterions of separate electric charge, 1,1-(1,omega-alkanediyl)-bispyridinium perfluorotetradecane- carboxylate [CnBP(FC14)2 : n = 2, 6, 10, 14], were newly synthesized and their interfacial behavior was investigated by Langmuir monolayer methods. Surface properties [surface pressure (pi)-, surface potential (DeltaV)-, dipole moment (micro perpendicular)-area (A) isotherms] and morphological images of CnBP(FC14)2 monolayers on a subphase of water and on various NaCl concentrations were measured by employing the Wilhelmy method, the ionizing electrode method, fluorescence microscopy (FM), and Brewster angle microscopy (BAM). CnBP(FC14)2 formed a stable monolayer on water at 298.2 K, where these pi-A isotherms shifted to a larger molecular area with increasing charge separation and had no transition point from a disordered phase to an ordered one. On the contrary, the pi-A isotherms on NaCl solutions moved to the smaller areas, showed the transition and higher collapse pressures compared to the pi-A isotherms on water. These results suggested that a sodium chloride subphase induced the condensation of CnBP(FC14)2 molecules upon compression. In addition, it is quite noticeable that a dissociation of CnBP counterion from CnBP(FC14)2 occurs on NaCl solutions, depending on the extent of charge separation. This phenomenon was supported by the changes of the limiting area, transition pressure, collapse pressure, repeated compression-expansion cycle curve, and DeltaV behavior of perfluorotetradecanoic acid (FC14). Furthermore, temperature dependence of these monolayers was investigated, and an apparent molar quantity change on the phase transition was evaluated on 0.15 M NaCl. The morphological behavior of CnBP(FC14)2 and FC14 monolayers was also confirmed by FM and BAM images.     

A study of the properties and composition of stearic acid monolayers on an aqueous subphase containing cadmium ions

Compression isotherms and chemical compositions of stearic acid (HSt) monolayers applied onto an aqueous subphase containing cadmium ions have been studied in a wide pH range. The data obtained have been used to calculate the dependences of surface elasticity E_2.5, change ΔA_2.5 in the surface area per molecule at a constant two-dimensional pressure in the monolayer of 2.5 mN/m, and change Δ|ζ| in the absolute value of the ζ potential of particles formed from the material of a monolayer collapsed on the surfaces of aqueous solutions with the same compositions on the pH of the subphase. The obtained data are in good agreement with each other and unambiguously attest to the dependences of the surface (E_2.5, ΔA_2.5) and electrosurface (Δ|ζ|) characteristics of the monolayers on their chemical composition. This leads us to make the reasonable suggestion that two alternative reactions may occur between cadmium ions and the HSt monolayer with the formation of two salts, CdSt₂ and Cd(OH)St.     

Langmuir–Blodgett Monolayers and Films of Alkylated Tetraazacrowns Containing Metal Ions and Nanoparticles

The behavior of individual 1,7-dicetyltetraaza-12-crown-4 and its mixture with 1,4,7,10-tetracetyltetraaza-12-crown-4 in the Langmuir monolayers at the subphases containing Cu(II) ions or colloidal gold particles is studied. Based on the compression isotherms, the complexing ability of these amphiphilic cyclenes in a monolayer at the surface of aqueous dilute solutions of copper salt is established. It was shown that the fraction of complexes in a monolayer is proportional to the copper ion concentration in the subphase. Using surface balance, atomic force microscopy, and electron microscopy methods, it was revealed that the monolayer of dicetylcyclene at the surface of gold hydrosol binds nanoparticles from the subphase; the number of particles bound by the monolayer is proportional to their content in the hydrosol. The Langmuir–Blodgett films (LBF) of dicetylcyclene are prepared; their ability to bind copper ions from solution was disclosed by quartz crystal microbalance. The LBFs of dicetylcyclene containing gold nanoparticles in each layer are assembled.     

Study of the aggregation of human insulin Langmuir monolayer

The human insulin (HI) Langmuir monolayer at the air-water interface was systematically investigated in the presence and absence of Zn(II) ions in the subphase. HI samples were dissolved in acidic (pH 2) and basic (pH 9) aqueous solutions and then spread at the air-water interface. Spectroscopic data of aqueous solutions of HI show a difference in HI conformation at different pH values. Moreover, the dynamics of the insulin protein showed a dependence on the concentration of Zn(II) ions. In the absence of Zn(II) ions in the subphase, the acidic and basic solutions showed similar behavior at the air-water interface. In the presence of Zn(II) ions in the subphase, the surface pressure-area and surface potential-area isotherms suggest that HI may aggregate at the air-water interface. It was observed that increasing the concentration of Zn(II) ions in the acidic (pH 2) aqueous solution of HI led to an increase of the area at a specific surface pressure. It was also seen that the conformation of HI in the basic (pH 9) medium had a reverse effect (decrease in the surface area) with the increase of the concentration of Zn(II) ions in solution. From the compression-decompression cycles we can conclude that the aggregated HI film at air-water interface is not stable and tends to restore a monolayer of monomers. These results were confirmed from UV-vis and fluorescence spectroscopy analysis. Infrared reflection-absorption and circular dichroism spectroscopy techniques were used to determine the secondary structure and orientation changes of HI by zinc ions. Generally, the aggregation process leads to a conformation change from α-helix to β-strand and β-turn, and at the air-water interface, the aggregation process was likewise seen to induce specific orientations for HI in the acidic and basic media. A proposed surface orientation model is presented here as an explanation to the experimental data, shedding light for further research on the behavior of insulin as a Langmuir monolayer.     

Controllable growth of straight nanorods and nanowires in the Langmuir films of a bolaamphiphilic par derivative.

A novel bolaamphiphilic compound, 1, 10-bis[3'-hydroxy-4'-(2'-pyridylazo)phenoloxy] decane [(PAR)2C10], was synthesized and its spreading film and in situ coordination with metal ions in the Langmuir monolayer at the air/water interface were investigated. It was found that (PAR)2C10 could be spread on the water surface, and the Langmuir film showed a phase transition from a flat conformation to a U-shaped conformation upon compression. Interfacial coordination between (PAR)2C10 and metal ions could occur in situ in the Langmuir monolayer. Depending on the concentration of the subphase, different coordination modes were observed. A 2:1 (ligand-PAR-to-metal-ion) complex was formed at a lower concentration of the subphase, while a 1:1 complex was obtained on the subphase with a higher concentration of the salt. Interestingly, very straight nanowires, extending to several micrometers, were observed in the AFM images of the films transferred from the subphase containing CuCl2 in higher concentrations. However, tortuous nanowires were observed under the subphase containing Cu(CH3COO)2. The formation of such kind of wire-like structures was only observed for the combination of the bolaamphiphilic PAR derivative with the Cu(II) ions. Other metal ions or the single-chain PAR derivative did not show this behavior. A possible growth mechanism of the nanowires was proposed based on the coordination of the bolaamphiphilic (PAR)2C10 with the Cu(II) ions as well as with the counteranions.     

Polystyrene-b-poly(tert-butyl acrylate) and polystyrene-b-poly(acrylic acid) dendrimer-like copolymers: two-dimensional self-assembly at the air-water interface

The two-dimensional self-assembly at the air/water (A/W) interface of two dendrimer-like copolymers based on polystyrene and poly(tert-butyl acrylate) (PS-b-PtBA) or poly(acrylic acid) (PS-b-PAA) was investigated through surface pressure measurements (isotherms, isochores, and compression-expansion hysteresis experiments) and atomic force microscopy (AFM) imaging. The two dendrimer-like block copolymers have an 8-arm PS core (Mn = 10 000 g/mol, approximately 12 styrene repeat units per arm) with a 16-arm PtBA (Mn = 230 000 g/mol, approximately 112 tert-butyl acrylate repeat units per arm) or PAA (Mn = 129 000 g/mol, approximately 112 acrylic acid repeat units per arm) corona. The PS-b-PtBA sample forms stable Langmuir monolayers and aggregates into circular surface micelles up to a plateau observed in the corresponding isotherm around 24 mN/m. Beyond this threshold, the monolayers collapse above the interface, resulting in the formation of large and irregular desorbed aggregates. The PS-b-PAA sample has ionizable carboxylic acid groups, and its A/W interfacial self-assembly was therefore investigated for various subphase pH values. Under basic conditions (pH = 11), the carboxylic acid groups are deprotonated, and the PS-b-PAA sample is therefore highly water-soluble and does not form stable monolayers, instead irreversibly dissolving in the aqueous subphase. Under acidic conditions (pH = 2.5), the PS-b-PAA sample is less water-soluble and becomes surface-active. The pseudoplateau observed in the isotherm around 5 mN/m corresponds to a pancake-to-brush transition with the PAA chains dissolving in the water subphase and stretching underneath the anchoring PS cores. AFM imaging revealed the presence of circular surface micelles for low surface pressures, whereas the biphasic nature of the pseudoplateau region was confirmed with the gradual aggregation of the micellar PS cores above the PAA chains. The aggregation numbers for both samples were estimated around 3-5 dendrimer-like copolymers per circular surface micelle. These rather low values confirmed the tremendous influence of molecular architecture on the two-dimensional self-assembly of block copolymers.     

Organization of beta-cyclodextrin under pure cholesterol, DMPC, or DMPG and mixed cholesterol/phospholipid monolayers

The complexation of beta-cyclodextrin with monolayers of cholesterol, DMPC, DMPG, and mixtures of those lipids has been studied using Brewster microscopy, PMIRRAS, and ab initio calculations. An oriented channel-like structure of beta-cyclodextrin, perpendicular to the air/water interface, was observed when some cholesterol molecules were present at the interface. This channel structure formation is the first step in the cholesterol dissolution in the subphase. With pure DMPC and DMPG monolayers, weaker, less organized complexes are formed, but they disappear almost completely at high surface pressure, and only a small amount of phospholipid is dissolved in the subphase.     

A new chelating ion-exchanger containing p-bromophenylhydroxamic acid as functional group-IV: column separations on a hydroxamic acid resin

A new chelating resin based on macroreticular acrylonitrile-divinylbenzene copolymer and containing hydroxamic acid functional groups has been synthesized. It is highly stable in acidic and alkaline solutions. The sorption characteristics of Cu(II), Cd(II), Pb(II), Zn(II), U(VI), Cr(VI), V(V), Co(II), Ni(II), Ca(II) and Mg(II) have been investigated over the pH range 1.0-6.0. The effect of various electrolytes at different ionic strengths on the K(d) values for Cu(II), Cd(II), Pb(II) and Zn(II) has been studied systematically. Chromatographic separations of copper(II) and nickel(II) from cobalt (II), and of uranium(VI) from chromium(VI) by selective sorption at controlled pH, have been developed. The ion-exchanger can be used for purification of inorganic salts, and analysis of brass and bauxite.