PEG-沸石固-固相变材料的制备及性能

摘要：采用接枝共聚法合成了以聚乙二醇（PEG）为相变物质,沸石为骨架的PEG沸石固-固相变材料。通过红外光谱（FT—IR）、热失重分析（TGA）和差示扫描量热法（DSC）等测试手段对PEG-沸石固-固相变材料的结构、相变行为及热稳定性进行了研究。结果表明：通过改变PEG的分子量,可以得到不同相变焓和不同相变温度的PEG-沸石固-固相变材料,其相变焓可达105．41J／g,热稳定性良好,起始分解温度高于300℃。     

聚乙二醇/二醋酸纤维素相变材料的组成与储能性能间的关系

以刚性的二醋酸纤维素 (CDA)链为骨架 ,接枝上聚乙二醇 (PEG)柔性链段 ,可得到一种具有固固相变性能的网状储能材料 .利用该材料的PEG支链从结晶态到无定形态间的相转变 ,可以实现储能和释能的目的 .具体研究了PEG的百分含量及PEG的分子量对材料储能性能的影响 .研究结果表明 ,通过改变PEG的百分含量与PEG的分子量 ,可以得到不同相变焓和不同相变温度的材料     

六羟基化合物为骨架的高分子固-固相变材料的合成与性能

分别使用三种含6个羟基的化合物(山梨醇、双季戊四醇和肌醇)作为分子骨架,聚乙二醇(PEG)作为相变功能链,4,4'-二苯基甲烷二异氰酸酯(MDI)为交联剂,合成了3种具有不同交联结构的新型固-固相变储能材料。通过傅里叶变换红外光谱(FT IR)、X-射线衍射(XRD)、偏光显微镜(POM)、示差扫描量热法(DSC)和热重量分析法(TG)分别对合成材料的分子结构、结晶性能、相变行为和热稳定性进行了研究。结果显示,所制备的材料在30~70℃温度范围内具有典型的固-固相变特性,其升温和冷却过程的相变焓最高可达107.5J/g和102.9J/g。此外,通过热重分析发现所合成材料具有较好的可重复使用性和热稳定性。因此,合成的新型固-固相变材料在热能储存和控温领域具有巨大的应用潜力。     

丙烯腈-衣康酸共聚物接枝聚乙二醇固-固相变材料的制备及表征

将衣康酸与丙烯腈共聚,构建具有双端羧基活性点的聚合物骨架,以二苯甲烷二异氰酸酯(MDI)为桥基,将聚乙二醇(PEG)接枝到聚合物骨架上,制备了丙烯腈-衣康酸共聚物接枝聚乙二醇(AIPCMs).采用红外光谱、差示扫描量热、X射线衍射、偏光显微镜、热失重及水静态接触角等方法研究了其结构、相变潜热性能、结晶性能、结晶形态、热稳定性及亲水性.结果表明,合成的AIPCMs具有固-固相变特性及优异的热储能性能,相变潜热达到70.5 J/g.化学接枝改变了AIPCMs中PEG的结晶结构及结晶形态.AIPCMs的热稳定性优异,初始分解温度达289℃,并且其亲水性较好,接触角最小可达33.71°.     

纤维素丙酸酯-g-二乙二醇正十六烷基醚固-固相变材料的制备及性能

以二月桂酸二丁基锡(DBTDL)为催化剂,微晶纤维素为骨架材料,二乙二醇正十六烷基醚(E2C16)为相变材料,采用化学接枝法制备了系列纤维素丙酸酯-g-二乙二醇正十六烷基醚(CP-g-E2C16)固-固相变材料.利用傅里叶变换红外光谱(FTIR)、核磁共振氢谱(1H NMR)、差示扫描量热仪(DSC)、热重分析(TG)和X射线衍射(XRD)对CP-g-E2C16相变材料的结构和热性能进行了表征.结果表明,得到了E2C16的取代度和接枝含量分别为0.12~0.37和17.1%~33.4%的CP-g-E2C16固-固相变材料.CP-g-E2C16接枝共聚物的相变温度和相变焓分别为25~34℃和40~62 J/g,符合人的体感舒适温度范围.CP-g-E2C16固-固相变材料的耐热温度高于237℃,与E2C16相比提高21~40℃,有望应用于熔融纺丝法制备纤维素基储热调温纤维领域.     

聚乙二醇型聚氨酯软硬段对其相变储热性能的影响

以不同分子量的聚乙二醇(PEG)为软段,MDI-BDO为硬段,采用两步法溶液聚合合成一种具有固-固相变储热性能的聚氨酯材料.通过DSC,WAXD等测试手段对体系的软硬段结晶性,微相分离,相变可逆性及循环热稳定性进行研究,结果表明,聚氨酯中硬段的存在对软段结晶有着很大的影响,当软段分子量达到2000或以上时,软段才具有较大的结晶度和熔融相变焓,且硬段含量必须高于一定值才能形成较为完善的物理交联网络以保证材料在发生相变时维持固体状态.同时符合这两个条件的试样能具有较好的固-固相变储热性能.就软段PEG含量及分子量对材料储热性能的影响进行了研究,通过调节软段含量与分子量得到一系列具有不同相变焓和相变温度的聚氨酯固-固相变储热材料.经测试还发现,该材料具备很好的相变可逆性和循环热稳定性,是一类很有开发前景的相变储热材料.     

KBF4非等温固-固相变热性质的测定

利用DTA-TG和DSC热分析技术研究了无机塑晶材料KBF4固-固相变的热性能,测得转变温度为284.13℃,转变焓为105.73J/g.KBF4固-固相变的机理是随着温度的升高,晶体中离子键部分断裂,晶体逐渐由低对称的正交晶系向高对称立方晶系转变,并在这过程中,同时引入化学键的振动和转动无序,从而吸收大量的相变焓.     

催化剂用量对醋酸纤维素接枝聚乙二醇单甲醚相变材料接枝率和性能的影响

以二月桂酸二丁基锡(DBTDL)作为催化剂,以醋酸纤维素(CDA)为基体材料、以聚乙二醇单甲醚(MPEG)为工作物质,利用溶液聚合法合成了纤维素接枝聚乙二醇单甲醚相变材料,研究了催化剂用量对MPEG接枝产物接枝率和性能的影响.结果表明,当催化剂用量为0.15%(质量分数,下同)时,MPEG1000和MPEG1500接枝产物的接枝率均达到最大值,分别为224.03%和189.30%;当催化剂用量为0.1%时,MPEG2000接枝产物的接枝率最大,达129.99%.此外,由不同分子量MPEG制备的接枝产物的相变温度和相变焓不同,不同产物在升温过程中均呈现较好的固-固相变调温性能.     

聚乙二醇单甲醚(MPEG)/聚乙烯醇(PVA)高分子固-固相变材料的合成与性能

高分子固-固相转变材料是近年来新兴的课题,其主要优点是体积变化小,发生相转变时不出现液态,可以减少对容器的要求,甚至不需要容器即可把相变材料作为结构材料,可简化工艺和降低成本,我们相继合成了系列聚乙二醇／聚乙烯醇高分子固-固相变材料,由于形成交联网络结构,难溶于一般有机溶剂。     

长链烷酸接枝羟丙基纤维素相变材料的制备及其性能

采用酯化的方法将具有相变特征的长链脂肪酸接枝到羟丙基纤维素主链上, 得到了一系列性能稳定, 温度范围适宜的高分子固-固相变材料, 并利用傅里叶红外光谱(FT-IR)、核磁共振(NMR)、差示扫描量热仪(DSC)、热失重分析仪(TGA)和X射线散射等技术手段对其化学结构及相变行为进行了研究。 结果表明, 该材料呈现出可逆的固-固相转变特性, 相变温度范围可通过改变脂肪酸的长度调节。 利用棕榈酸、硬脂酸和花生酸获得的相变材料焓值达到60 J/g, 所获得的材料在250 ℃以内不发生热分解。 通过将两种长链脂肪酸混合同时接枝到羟丙基纤维素主链上, 所得产物的吸/放热温度随着混合脂肪酸组分含量的变化而变化, 同时X射线散射的结果也证明羟丙基纤维素混合酯的分子间距是位于其两种单一酯之间的。这一结果为制备一定温度范围内任意相变温度的高分子固-固相变材料提供了简便的方法。     

Side‐chain crystallization behavior of graft copolymers consisting of amorphous main chain and crystalline side chains: Poly(methyl methacrylate)‐graft‐poly(ethylene glycol) and poly(methyl acrylate)‐graft‐poly(ethylene glycol)

Graft copolymers consisting of amorphous main chain, poly(methyl methacrylate) (PMMA), or poly(methyl acrylate) (PMAc), and crystalline side chains, poly(ethylene glycol) (PEG), have been prepared by copolymerization of PEG macromonomers with methyl methacrylate or methyl acrylate (MMAx or MACx, respectively). Because of the compatibility of PMMA/PEG and PMAc/PEG, from small‐angle X‐ray scattering results, the main and side chains in graft copolymers were suggested to be homogeneous in the molten state. Differential scanning calorimetry (DSC) cooling scans revealed that PEG side chains for graft copolymers with large PEG fractions were crystallized when the sample was cooled, with a cooling rate of 10 °C/min. The spherulite pattern observed by a polarized optical microscope suggested the growth of PEG crystalline lamellae. Crystallization of PEG in MMAx was more restrained than in MACx. From these results, we have concluded that the crystallization behavior of the grafted side chains is strongly influenced by the glass transition of a homogeneously molten sample as well as dilution of the crystallizable chains. Domain spacings for isothermally crystallized graft copolymers were described by interdigitating chain packing in crystalline–amorphous lamellar structure. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 79–86, 2005     

Synthesis and properties of poly(ethylene oxide)‐grafted polyethylene copolymer and terpolymer

A series of graft copolymers were synthesized based on ethylene‐co‐m,p‐methylstyrene (EMS) (backbone copolymer), ethylene‐1‐hexene‐m,p‐methylstyrene (EHMS) (backbone terpolymer), and polyethylene glycol monomethyl ethers (PEGM) (grafts) in this study. The PEGMs with molecular weights of 750 and 2000 were used. The chemical composition of the graft copolymers was analyzed by NMR and DSC measurements. The graft copolymers exhibited a phase‐separated morphology with the backbone and the methoxy polyethylene glycol (MPEG) grafts forming separate crystalline phases. The MPEG phase had a melting temperature lower than the corresponding MPEG homopolymer, as determined by DSC. The melting point of the crystalline phase formed by the EMS and EHMS main chains was lower than that of pure polymer backbone. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and Characterization of Storage Energy Materials Prepared from Nano-crystalline Cellulose/Polyethylene Glycol

The development and the application of phase change materials (PCMs) as a new kind of materials have attracted both scientific and industrial interest1-4. According to the patterns of phase conversion, commonly PCMs are divided into solid-liquid phase cha…     

含氟两亲接枝共聚物的制备及其结晶行为

采用大分子单体技术合成了一系列以聚乙二醇为支链、甲基丙烯酸六氟丁酯为主链的含氟两亲接枝共聚物(PHFMA-g-PSPEG)。用1HNMR和凝胶色谱(GPC)对制备的大分子单体和两亲接枝共聚物的结构进行了表征。利用示差扫描量热法(DSC)、X射线衍射(XRD)和偏光显微镜(POM)测试技术对含氟两亲接枝共聚物的结晶行为进行了研究。DSC和XRD结果表明,随着共聚物中含氟链段质量分数的增加,其结晶温度(Tc)和结晶度(Xc)均降低,而结晶熔融温度(Tm)先减小后增加。POM发现,随着共聚物中含氟链段质量分数的增加,其结晶速度减慢,共聚物形成清晰球晶的能力减弱,当共聚物中含氟链段质量分数为57%时,含氟两亲接枝共聚物已不能形成清晰的球晶。     

Synthesis of polyvinyltrimethylsilane-graft-poly(ethylene glycol) copolymers and properties of gas-separating membranes formed on their basis

A method is developed for the synthesis of the graft copolymer polyvinyltrimethylsilane-graft-poly(ethylene glycol) via the interaction of a brominated polymer with the methyl ether of a low-molecular-mass poly(ethylene glycol). Graft copolymer samples containing up to 79 wt % poly(ethylene glycol) are synthesized through this method. The properties of the graft copolymers and blends formed on their basis with a specially synthesized low-molecular-mass PEG derivative with a terminal trimethylsilyl group are investigated. Physical blends are prepared in order to increase the content of ethylene oxide groups while the film-forming properties of the composite materials are preserved. As shown by structural studies, the graft copolymers are amorphous single-phase systems, while the related blends are two-phase disperse systems, in which one phase is enriched in polytrimethylvinylsilane and the other is enriched in PEG. Studies of the gas-transport behavior of the samples reveal that the introduction of PEG, in contrast to the nonselective initial polymer, results in the formation of PVTMS-based materials that are selective for CO₂ in mixtures with H₂.     

聚对二氧环己酮/聚乙二醇两亲性聚合物共网络的合成与表征

以辛酸亚锡为催化剂,季戊四醇(PTOL)为引发剂,引发对二氧环己酮(PDO)单体开环聚合,合成了以PTOL为核的四臂聚对二氧环己酮(4s-PPDO).通过直接将4s-PPDO预聚物和聚乙二醇(PEG)于熔点以上、惰性气体保护下与偶联剂甲苯二异氰酸酯(TDI)交联共聚得到聚对二氧环己酮/聚乙二醇(PPDO-b-PEG)两亲性共网络聚合物(PPDO-PEG APCNs).研究了两亲性聚合物共网络结构、配比组成、溶剂种类等对聚合物溶胀率的影响,结果表明APCNs在不同类型的溶剂中表现出不同的溶胀行为,可以通过调节偶联剂的用量及PPDO/PEG的投料比来满足不同的实际需求.通过示差扫描量热分析(DSC)详细研究APCNs的结晶性能,证实交联反应降低APCNs的结晶度和结晶尺寸.     

部分醇解聚乙烯醇接枝聚对二氧环己酮的合成与表征

制备了部分醇解的PVA(paPVA),将其与PDO在均相本体接枝聚合,通过对paPVA醇解度以及投料比的选择,得到了具有各种分子结构的接枝共聚物.通过一维核磁共振谱表征了聚合物的微观结构;采用TG、DSC等测试手段研究了接枝共聚物的热性能和结晶性能.     

Synthesis of poly[N‐isopropylacrylamide‐g‐poly(ethylene glycol)] with a reactive group at the poly(ethylene glycol) end and its thermosensitive self‐assembling character

Poly[N‐isopropylacrylamide‐g‐poly(ethylene glycol)]s with a reactive group at the poly(ethylene glycol) (PEG) end were synthesized by the radical copolymerization of N‐isopropylacrylamide with a PEG macromonomer having an acetal group at one end and a methacryloyl group at the other chain end. The temperature dependence of the aqueous solutions of the obtained graft copolymers was estimated by light scattering measurements. The intensity of the light scattering from aqueous polymer solutions increased with increasing temperature. In particular, at temperatures above 40°C, the intensity abruptly increased, indicating a phase separation of the graft copolymer due to the lower critical solution temperature (LCST) of the poly(N‐isopropylacrylamide) segment. No turbidity was observed even above the LCST, and this suggested a nanoscale self‐assembling structure of the graft copolymer. The dynamic light scattering measurements confirmed that the size of the aggregate was in the range of several tens of nanometers. The acetal group at the end of the PEG graft chain was easily converted to the aldehyde group by an acid treatment, which was analyzed by ¹H NMR. Such a temperature‐induced nanosphere possessing reactive PEG tethered chains on the surface is promising for new nanobased biomedical materials. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1457–1469, 2006