PEG-沸石固-固相变材料的制备及性能

摘要：采用接枝共聚法合成了以聚乙二醇（PEG）为相变物质,沸石为骨架的PEG沸石固-固相变材料。通过红外光谱（FT—IR）、热失重分析（TGA）和差示扫描量热法（DSC）等测试手段对PEG-沸石固-固相变材料的结构、相变行为及热稳定性进行了研究。结果表明：通过改变PEG的分子量,可以得到不同相变焓和不同相变温度的PEG-沸石固-固相变材料,其相变焓可达105．41J／g,热稳定性良好,起始分解温度高于300℃。     

聚乙二醇/二醋酸纤维素相变材料的组成与储能性能间的关系

以刚性的二醋酸纤维素 (CDA)链为骨架 ,接枝上聚乙二醇 (PEG)柔性链段 ,可得到一种具有固固相变性能的网状储能材料 .利用该材料的PEG支链从结晶态到无定形态间的相转变 ,可以实现储能和释能的目的 .具体研究了PEG的百分含量及PEG的分子量对材料储能性能的影响 .研究结果表明 ,通过改变PEG的百分含量与PEG的分子量 ,可以得到不同相变焓和不同相变温度的材料     

接枝共聚法制备聚乙二醇(PEG)/聚乙烯醇(PVA)高分子固-固相变材料性能研究

用接枝共聚法将具有相变特征的聚乙二醇(PEG)接枝到具有较高熔点的聚乙烯醇(PVA)主链上,得到了系列性能稳定的PEG/PVA高分子固-固相转变材料,用DSC,WAXD和POM对其相变行为及形态结构进行了研究.结果表明,该材料呈现出可逆的固-固相转变特性;其结晶峰值温度和相变焓比纯PEG低,接枝率对相变温度和归一化相变焓影响不大;接枝率只影响结晶与熔融行为,不影响结晶结构.     

水性聚氨酯相变储能材料的相变机理

以聚乙二醇(PEG)为软段、六亚甲基二异氰酸酯-1,4-丁二醇-二羟甲基丙酸(HDI-BDO-DMPA)为硬段,制备了一系列水性聚氨酯相变储能材料(WPUPCM)。在相变过程中,由于软段PEG由聚合前的固-液相变转化为聚合后的固-固相变,因此,所制备的WPUPCM表现出固-固相变特性。为了研究其固态相变行为的本质和形成机理,揭示该类聚合物的能量贮存和转换机理,应用偏光显微镜、扫描电镜、原子力显微镜、X射线衍射仪分析研究了PEG、WPUPCM在相变过程中的晶体结构变化特征,讨论了WPUPCM固-固相转变的机理。     

六羟基化合物为骨架的高分子固-固相变材料的合成与性能

分别使用三种含6个羟基的化合物(山梨醇、双季戊四醇和肌醇)作为分子骨架,聚乙二醇(PEG)作为相变功能链,4,4'-二苯基甲烷二异氰酸酯(MDI)为交联剂,合成了3种具有不同交联结构的新型固-固相变储能材料。通过傅里叶变换红外光谱(FT IR)、X-射线衍射(XRD)、偏光显微镜(POM)、示差扫描量热法(DSC)和热重量分析法(TG)分别对合成材料的分子结构、结晶性能、相变行为和热稳定性进行了研究。结果显示,所制备的材料在30~70℃温度范围内具有典型的固-固相变特性,其升温和冷却过程的相变焓最高可达107.5J/g和102.9J/g。此外,通过热重分析发现所合成材料具有较好的可重复使用性和热稳定性。因此,合成的新型固-固相变材料在热能储存和控温领域具有巨大的应用潜力。     

纤维素基储能调温超细纤维的制备

使用静电纺丝法制备了以醋酸纤维素(CA)为载体基质,聚乙二醇(PEG)为相变材料的新型PEG/CA储能调温超细复合纤维,研究了纺丝溶液中不同PEG含量和分子量对复合纤维的形态和热学性能的影响。结果发现复合纤维的形态一般呈表面光滑的圆柱状,其平均直径随着PEG含量和分子量的增加而增大,PEG随机分布在复合纤维中的内部和表面。热学分析发现当改变纤维中PEG的含量时,复合纤维的相变温度变化不大,而相变焓则与之成正比变化;当改变纤维中PEG分子量时,复合纤维的相变温度和相变焓均随之而改变。通过多次热循环测试发现复合纤维的热学性能均无太大变化,表明所得复合纤维具有良好的耐热性能和稳定性能。通过模拟测试发现,所制得的PEG/CA复合纤维具有良好的蓄热调温特性。因此,PEG/CA储能调温超细复合纤维具有很好的应用前景。     

软硬段对聚氨酯弹性体结构性能的影响

采用本体聚合和溶液聚合两种方法,合成了一系列用聚乙二酸丁二醇酯二醇作为软段的聚氨酯弹性体。研究了硬段含量和聚醚添加量对聚氨酯弹性体综合性能的影响。利用红外光谱、热分析、力学性能测试、记忆回弹性能和耐水解老化实验等测试手段对样品进行了表征与分析。结果表明:硬段质量含量为31%~35%时,材料的力学性能较优,形状回复率可以达到75%~85%;软段中聚醚添加量在4%~5%(占软段的质量分数)时,弹性体具有较好的力学性能和耐水解性能。     

不同软段结构聚氨酯-酰亚胺嵌段共聚物的合成及热性能研究

用二步法合成了不同软段 (PPO ,PEG ,PEPA)聚氨酯 酰亚胺 (PUI)嵌段共聚物 ,FTIR光谱表征了所有合成PUI分子主链均含有酰亚胺链段 ,并研究了PUI嵌段共聚物的热性能受软段类型及长度的影响 .DSC研究表明聚酯型PUI的软硬段之间的相容性比聚醚型PUI好 ,随相同软段分子量的增加 ,PUI体系的软硬段兼容性变差 ,并显示了相分离的特征 ;热失重 (TGA)研究得出不同软段的PUI样品的热稳定性大小顺序为 :PEPA PUI >PEG PUI>PPO PUI ;动态力学 (DMTA)研究给出了所合成的PUI样品在 5 0～ 2 0 0℃范围内均出现了较长的模量平台显示出有较好的耐热性 ,且随硬段含量的升高其储能模量不断增强     

混合高级醇固-液相变储热材料的研究

相变储热材料研究与开发是国内外的一个新兴领域[1-6]。为了解决一些仪器的内部散热问题,本文研究了混合高级醇固-液相变储热材料的凝固和熔化特性、相变焓值、固液相体积以及石墨粉对材料的导热性能。1实验部分1·1试剂与仪器CDR-1型差动热分析仪-配微机处理系统,上海天平仪器     

不同软段长度PBT-co-PBS-b-PEG嵌段共聚物的合成与表征

用熔融缩聚法合成了一系列具有不同软段长度的聚对苯二甲酸丁二酯 (PBT) co 聚丁二酸丁二酯(PBS) b 聚乙二醇 (PEG)嵌段共聚物 (PTSG) ,考察了PEG分子量 (Mn(PEG) )及PBS摩尔分数 (MPBS)对材料性能的影响 实验表明 ,随Mn(PEG)增加 ,缩聚反应时间延长 ,所得产物分子量均呈较为对称的单峰分布 ,多分散性指数小于 2 0 硬段序列结构分析显示 ,随MPBS 增加 ,PBT平均序列长度减小 ,而PBS平均序列长度增加 ,二者呈无规分布 .受组成及硬段平均序列长度变化影响 ,材料内部呈微观相分离状态 ,DSC曲线上可分别观察到软、硬段熔点及玻璃化转变温度 ;硬段熔点及结晶度随MPBS升高而降低 ,主要是受其平均序列长度变化及共晶作用所致 .材料断裂延伸率及降解速率均随Mn(PEG)及MPBS增加而增加 ,可见提高软段长度及降低硬段结晶度等均能有效改善共聚物高分子链的柔韧性及亲水性 ,赋予共聚物更好的降解性能 .     

具有热致形状记忆功能的热塑性多嵌段聚氨酯

以ＰＣＬ为软段、ＴＤＩ－ＢＤＯ为硬段，采用溶液聚合的方法合成了具有形状记忆功能的线性多嵌段聚氨酯．利用ＤＳＣ、ＤＭＴＡ、ＷＡＸＤ等测试手段对体系的结晶性、微相分离行为进行了研究．结果发现：聚氨酯中硬段的存在对软段的结晶有着很大的影响，当软段序列的平均分子量达到３０００以上时，软段才可以很好地结晶；并且，硬段含量也必须高于一定值才能形成较为完善的物理交联点．符合这些条件的试样能显示很好的形状记忆特征．此外还就拉伸比、多次形变以及组成等对材料的形状回复性能的影响进行了详细的研究．     

COMPATIBILITY OF PVC WITH POLYURETHANES OF DIFFERENT SOFT SEGMENTS

Blends of PVC and polyurethanes with four different soft segments of molecular weight 1000 were prepared and studied by dynamic mechanical and DSC techniques. It was found that the compatibility of PVC with segmented polyurethanes was related to the mixing of PVC molecules and the soft segments of the polyurethanes. Polyester based polyurethanes are more compatible with PVC than polyether based polyurethanes. Solution cast blends of PVC with PCL-polyurethane (1/2/1) exhibit single and narrow glass transition, while the blends with PPO-polyurethane (1/2/1) are completely incompatible. The compatibility was found to decrease with increasing hard segment content for all the polyurethanes used. The methods of blend preparation may change the compatibility of PVC/PU blends through their influence on the mixing or demixing of the hard and soft segments.     

Effect of soft segment length on properties of fluorinated polyurethanes

The effects of soft segment length on the variations in morphology, surface composition, and hydrophilicity have been studied in fluorinated polyurethanes (FPUs) and correlated with their preliminary blood compatibility as evidenced by in vitro platelet adhesion experiments. The fluorinated polyurethanes were obtained using hexamethylene diisocyanate (HDI) and chain extender of 2,2,3,3-tetrafluoro-1,4-butanediol (TF) as the hard segment as well as various soft segments—polytetramethyl oxides (PTMO) with molecular weights of 650, 1000, 1400, and 2000. The increased phase separation in hard-segment domains with lengthening soft segment was observed by FT-IR, which is believed to result in enhanced strength of hydrogen bonds and good hard-segment order arrangement. Thin-film XRD results indicate at least three lateral distances existing between adjacent hard segments in the crystallized hard segment. Their distribution depends strongly on the length of soft segment. Lengthening soft segment promotes the formation of dense arrangement of crystallized hard segments. Compared with the effect of phase separation, surface composition was found to exert a major influence on the preliminary blood compatibility of fluorinated polyurethanes. Increasing fluorine content by decreasing soft segment length promotes reduction in platelet adhesion and activation on polyurethane surfaces.     

Synthesis and properties of polycyanoethylmethylsiloxane polyurea urethane elastomers: A study of segmental compatibility

A series of polyurea urethane block polymers based on either aminopropyl-terminated polycyanoethylmethylsiloxane (PCEMS) soft segments or soft segment blends of PCEMS and polytetramethylene oxide (PTMO) were synthesized. The hard segments consisted of 4,4′-methylenediphenylene diisocyanate (MDI) chain-extended with 1,4-butanediol. The hard segment content varied from 11 to 36%, whereas the PTMO weight fraction in the soft segment blends varied from 0.1 to 0.9. The cyanoethyl side group concentration was also varied during the synthesis of the PCEMS oligomer. The morphology and properties of these polymers were studied by differential scanning calorimetry, infrared spectroscopy, dynamic mechanical and tensile testing, and small-angle x-ray scattering. These materials exhibited microphase separation of the hard and soft segments; however, attaching polar cyanoethyl side groups along the apolar siloxane chains promoted phase mixing in comparison with polydimethylsiloxane-based polyurethanes. The increased phase mixing is postulated to lead to improved interfacial adhesion and thus can account for the observed improvement in ultimate tensile properties compared with polydimethylsiloxane-based polyurethanes. Both hard segment content and cyanoethyl concentration are important factors governing the morphological and tensile properties of these polymers.     

对苯二甲酸丁二酯-ε-己内酯多嵌段共聚物中硬链段的受限结晶

用差示扫描量热法（DSC）,广角X射线衍射（WAXD）,傅立叶变换红外光谱（FTIR）等技术研究了对苯二甲酸丁二酯-ε-己内酯（PBT—PCL）多嵌段共聚物中硬链段的受限结晶。结果表明,PBT—PCL共聚酯中软硬链段在非晶区的混容性比较好,不同组成的样品均显示出一个玻璃化转变温度;对硬段含量超过50%的共聚酯来说,硬链段可以结晶,而软链段不能结晶;由于硬链段的受限特点,BT硬链段的结晶受软链段的影响和制约,其结晶能力随硬段序列长度的增加而逐渐增大。     

Hydrolytic stability of nano-particle polyurethane dispersions: Implications to their long-term use

Nano-particle segmented polyurethane anionomer dispersions with ions either on the soft segment or on the hard segment were synthesised using 2,2-bis(hydroxymethyl) propionic acid and 5-sodiosulfo-1,3-benzenedicarboxylic acid as ionic centre. The resulting polyurethane dispersions were characterized for their particle size, reduced viscosity and hydrolytic stability in the presence of the aqueous phase during storage. At similar ionic contents, the polyurethanes that contain ionic groups on their soft segment had smaller particle sizes than those that contain ionic groups on the hard segment due to the effectiveness of the sulphonate ionic groups incorporated in the former. The reduced viscosity of the anionomers in dimethylformamide (DMF) showed typical polyelectrolyte effect that can be eliminated by the addition of LiBr. The hydrolysis study conducted over 2-years indicated that polyurethanes in which the ions were located on the hard segment had better hydrolytic stability in aqueous environment than those with ions located on the soft segment. We attributed this due to the fact that unsolvated hydrophobic polyester segments were packed in the interior of the particles while the strongly hydrated urethane segments with mutually repelling carboxylate ions were situated on the outside surface of the particles. The polyester groups prone to hydrolytic attack were thus protected against hydrolysis as effectively as in the dry solid form.     

聚氨酯硬链段球晶生长与软硬链锻混容性的关系

线型可溶性聚氨酯的硬链段结晶难以长成球晶 ,然而本实验室已经证明即使从熔体结晶硬链段也是能够长成球晶的 .研究了聚酯与聚醚型聚氨酯硬链段长球晶的规律 ,并发现聚氨酯硬链段长球晶的难易与聚氨酯软硬链段混容性密切相关 .动态力学分析 (DMA)与示差扫描量热 (DSC)实验表明聚ε 已内酯 (PCL)、聚已二酸丁二醇酯 (PTMA)、聚四氢呋喃 (PTMO)及聚环氧丙烷 (PPO)型聚氨酯的软硬链段混容性从前至后递减 .从熔体退火结晶时 ,聚氨酯硬链段长成球晶的退火温度范围是有限的 ,软硬链段混容性越好 ,聚氨酯硬链段能长成球晶的温度范围越窄 ,所需长的时间越长 .聚氨酯硬链段长球晶的下限温度取决于软硬链段间所存在的氢键作用 ,聚氨酯硬链段长球晶的上限温度与软硬链段混容性直接相关 .     

STUDIES ON THE SPHERULITE FORMATION IN MELT CAST POLYCAPROLACTONE BASED POLYURETHANES

A series of PCL/MDI/BDO segmented polyurethanes have been synthesized by two-step method in solution.The hard segment content ranges from 10% to 48% by weight, and the molecular weight of PCL diols is 1500. Hard segment spherulites have been observed in compression molded specimens of all of the samples except the one of the lowest hard segment content. The difficulty in sphernlite formation was explained as only in a small temperature range,the microphase separation rate may be faster than the crystallization rate and all these processes are very slow due to the hydrogen bonding between hard and soft segments and the interactions between hard segments themselves. PCL soft segments of molecular weight 1500 is still crystallizable and may form different crystalline superstructures.     

Shape memory polyurethanes based on recycled polyvinyl butyral. I. Synthesis and morphology

Shape memory polyurethanes (SMPUs) were synthesized by 4,4′-diphenylmethane diisocyanate (MDI), hexane-1,6-diol (HD), polypropylene glycol (PPG), and recycled polyvinyl butyral (PVB). Dynamic mechanical analysis, differential scanning calorimetry and Fourier transformation infrared attenuated total reflection spectroscopy was used to characterize the poly (vinylbutyral-urethanes). Micro-phase domain separation of hard and soft segments and phase inversion were investigated. Increasing the hard segment content, i.e., average hard segment molecular weight, leads to an increase in the degree of micro-phase separation, hard domain order and crystallinity. The crystalline hard segment structures combined with the elastic nature of soft segment matrix provide enough physical and chemical crosslinks to have shape memory effect.