聚合物胶束作为药物载体的研究进展

聚合物胶束是具有疏水核心和亲水壳的自组装纳米颗粒.作为一种新型的药物载体,聚合物胶束具有载药范围广、结构稳定、体内滞留时间长、毒副作用小等特点.可以通过肿瘤组织的高通透性和滞留效应被动地富集在癌组织中,也可以通过修饰聚合物胶束的表面基团来实现药物靶向给药.本文总结并分析了聚合物胶束作为药物载体的研究进展,包括聚合物胶束的功能特点、制备、应用和药物的包载.     

聚合物胶束作为药物载体的研究进展

聚合物胶束作为药物载体具有其独特的优势。本文综述了形成聚合物胶束的两亲性共聚物的组成、聚合物胶束的形成、形态以及近些年来作为药物载体的研究进展。     

聚乙二醇-聚乳酸-聚甲基丙烯酸羟乙酯两亲性三嵌段聚合物的合成及其自组装研究

具有生物相容性的两亲性嵌段共聚物在水中易形成胶束,在医学诊断、体内药物缓释及药物靶向输送方面具有广阔的应用前景.利用二嵌段聚合物聚乙二醇-聚乳酸(PEG-PLA)引发甲基丙烯酸羟乙酯的原子转移自由基聚合,制备了两亲性三嵌段聚合物聚乙二醇-聚乳酸-聚甲基丙烯酸羟乙酯(PEG-PLA-PHEMA),利用凝胶渗透色谱(GPC),红外光谱(FT-IR),1H NMR表征了其聚合物组成;然后利用透析法制备了不同分子量的聚合物胶束,动态光散射(DLS)和透射电镜(TEM)结果表明其形貌规整、尺寸均一,而且胶束粒径在PEG和PLA链段长度不变的条件下,随PHEMA链段的变长而增大.PHEMA链上大量羟基的存在为聚合物胶束的功能化改性提供了反应位点,加上本身完全由具良好生物相容性的聚合物制备,使其在可控药物释放方面具有很大的应用潜力.     

含醛基可降解嵌段共聚物的合成及其生物缀合

以PEO-DDMAT为大分子RAFT试剂、BPO为引发剂,调控含醛基单体4-乙烯基苯甲醛(VBA)与不饱和环缩醛单体5,6-苯基-2-亚甲基-1,3-二氧七环(BMDO)的RAFT共聚合,获得一种新型含醛基、可降解的两亲性嵌段共聚物PEO-b-poly (VBA-co-BMDO),并对不同单体投料比下的共聚行为进行了研究.由于聚合物主链含有酯基,可以在水中碱性条件下进行降解.细胞毒性分析表明其具有良好生物相容性.该嵌段聚合物还可以通过醛基-氨氧基“点击”反应和模型生物分子氨氧基胆固醇(H2NO-Chol)形成稳定的聚合物-生物分子缀合物,该缀合物能在水溶液中自组装成纳米胶束.结果表明PEO-b-poly (VBA-co-BMDO)可以作为聚合物载体缀合含氨氧基的药物分子,在生物医药方面有良好的应用前景.     

核交联的含磺酸甜菜碱pH敏感胶束的制备与表征

制备了一种在疏水段带有侧基叠氮官能团的两亲性pH敏感的聚合物——聚己内酯-聚(甲基丙烯酸二乙氨基乙酯-磺酸甜菜碱)((PCL-ACL)-PDEAS);同时合成了两端带有炔基中间带有二硫键的交联剂,用红外、核磁表征了目标分子.通过两亲性高分子自组装形成胶束,并通过点击化学反应获得了核交联的胶束.通过动态光散射测定粒径,胶束酸碱滴定表征胶束的pH敏感性,还原条件下释放药物的速度,对比了非交联胶束和交联胶束的性质.结果表明,交联胶束在正常生理条件下的释放速度比未交联胶束更慢;而在有DTT的存在条件下,交联胶束由于二硫键断裂,释放速率明显加快.因此,核交联载药胶束有可能响应肿瘤的微环境实现靶向释放.     

两亲聚合物胶束自组装包药研究进展

两亲聚合物胶束具有突出的理化性能和独特功能,能够在溶液中自组形成具有核壳结构的聚合物胶束,同时实现药物的负载。自组装包药技术能够缓解我国药物辅料缺乏的现状,符合目前药物辅料发展的新趋势。通过自组装形成的聚合物胶束在药物控释、药物靶向载体、药物制剂开发、新型药物辅料等方面具有广阔的应用前景。本文综述了两亲聚合物胶束自组装包载药物的原理以及方法,重点介绍了三类两亲聚合物在自组装包药方面的最新研究成果和发展趋势。本文还对载药胶束在药物释放方面的应用进行了概述。     

聚二甲基硅氧烷接枝二甲基丙烯酰胺的制备及其胶束化研究

高分子胶束具有低临界胶束浓度(CMC)、稳定性高等优点,在药物输送和药物控制缓释等诸多领域显示出很好的应用前景[1].在生物体内应用对高分子胶束的生理相容性和无毒副作用的要求是关键点.有机硅具有的生理相容性、无毒副作用,是其它纯碳骨架聚合物所不能比拟的[2].因此,合成基于聚硅氧烷的两亲性共聚物以及利用它们制备胶束的工作越来越受到人们的重视[3].本文以侧基带环氧基团的聚硅氧烷和亲水性大分子单体通过环氧基团的开环反应制得两亲性共聚物,并通过荧光光谱和激光光散射研究了两亲性共聚物的胶束化行为.     

基于炔烃参与的多组分聚合构建氧化还原双重响应型高分子药物载体

为了拓展多组分聚合方法在药物载体领域应用,基于铜催化的炔烃多组分聚合设计合成含有二硒键的氧化还原响应型两亲性聚合物,与阿霉素(DOX)在水溶液中通过自组装方式构建纳米载药胶束.通过实验技术手段对纳米载药胶束表征可知,纳米载药胶束的粒径在130 nm左右,临界胶束浓度(CMC)值为0.23 mg/mL,在人体正常生理条件下结构稳定.肿瘤中含有浓度较高的活性氧(ROS)或谷胱甘肽(GSH),聚合物主链中二硒键在氧化还原条件下断裂,导致聚合物降解,DOX从纳米载药胶束中逐渐释放,且累积释放量可达100%,并发现该类载药胶束在GSH环境中药物释放性能优于ROS环境.该工作通过多组分聚合方式可以便捷构建氧化还原双重响应型的两亲性聚合物,在肿瘤微环境中表现出特异的降解性能,为开发设计智能响应型高分子药物载体提供新的思路.     

聚己内酯-紫杉醇高分子前药的合成及性能研究

利用侧链带有羧基的官能化两亲性聚己内酯基共聚物Pluronic-b-poly(ε-caprolactone-co-6-carboxylic-ε- caprolactone) [Pluronic-b-P(CL-co-CCL), FC]为底物, 与紫杉醇(PTX)反应得到了一系列PTX的聚合物前药FCPTX. 通过核磁共振(¹H NMR)和高效液相色谱(HPLC)表征了聚合物前药结构并分析了前药中的PTX接枝率. 通过聚合物前药胶束进一步物理包载PTX, 得到载有PTX的聚合物前药胶束PTX/FCPTX, 其载药量和包封率随着前药FCPTX中的PTX接枝率的增加而提高. 利用荧光光谱(FS)、透射电镜(TEM)和粒径分析仪(DLS)表征了胶束的临界胶束浓度(CMC), 形态和粒径. 体外细胞评价表明, 聚合物前药FCPTX具有较高的胞内累积量和良好的血液相容性、能有效降低紫杉醇的药物毒性. 作为一种优秀的药物载体, 聚合物前药FCPTX在联合化疗领域有着较大的应用潜力.     

新型仿生聚合物胶束用于纳米药物载体的研究

对两亲性聚合物进行设计和优化, 从细胞膜仿生的设计出发, 利用原子转移自由基聚合, 制备了一种以胆固醇为疏水段、以仿细胞膜磷酸胆碱基聚合物为亲水段的两亲性分子CMPC. 在对其溶液胶束自组装行为进行探索的基础上, 以水包油(O/W)溶剂挥发法制备了包含抗癌药物阿霉素(ADR)的纳米抗癌药物载体, 通过体外细胞培养, 研究了仿细胞膜两亲分子的细胞相容性, 并对抗癌纳米药物载体抗肿瘤细胞的药效进行了初步研究.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.