悬浮聚合法合成马拉硫磷分子印迹聚合物的吸附性能研究

基于分子印迹技术,采用悬浮聚合的方法,合成了马拉硫磷分子印迹聚合物。通过优化,确定最佳合成条件为:模板分子(马拉硫磷)∶功能单体(α-甲基丙烯酸)为1∶8,模板分子(马拉硫磷)∶交联剂(乙二醇二甲基丙烯酸酯)为1∶40,温度60℃,引发剂用量为1.0%。吸附性能测试结果表明,印迹聚合物对马拉硫磷的最大吸附量为4.62μg/mg,而非印迹聚合物对马拉硫磷的最大吸附量为2.21μg/mg;通过选择性实验得到印迹聚合物对灭线磷、甲拌磷、特丁硫磷、乐果、马拉硫磷、克线磷的吸附量分别为3.87、3.75、3.57、4.00、4.44、3.61μg/mg,而非印迹聚合物的吸附量分别为1.42、1.37、1.30、1.43、1.12、1.23μg/mg。     

内分泌干扰物雌酮分子印迹新型吸附功能材料的制备及其选择性能研究料

采用分子印迹本体聚合法,制备了对内分泌干扰物雌酮具有高选择识别能力的分子印迹聚合物。吸附动力学和选择性实验结果表明,与非印迹聚合物相比,印迹聚合物具有较高的吸附容量和吸附速率,对模板分子具有较高的选择性。聚合反应条件对印迹聚合物的吸附和识别性能有重要影响,以丙烯酰胺为功能单体,模板分子、功能单体和交联剂摩尔比为1：3：6,制备的印迹聚合物具有较高的选择和吸附性能。     

内分泌干扰物雌酮分子印迹新型吸附功能材料的制备及其选择性能研究

采用分子印迹本体聚合法,制备了对内分泌干扰物雌酮具有高选择识别能力的分子印迹聚合物。吸附动力学和选择性实验结果表明,与非印迹聚合物相比,印迹聚合物具有较高的吸附容量和吸附速率,对模板分子具有较高的选择性。聚合反应条件对印迹聚合物的吸附和识别性能有重要影响,以丙烯酰胺为功能单体,模板分子、功能单体和交联剂摩尔比为1:3:6,制备的印迹聚合物具有较高的选择和吸附性能。     

基于N,O-双异丁烯酰乙醇胺为交联功能单体的苯磺隆分子印迹聚合物膜的制备及其性能研究

以苯磺隆为模板分子, N,O-双异丁烯酰乙醇胺为交联功能单体, 在尼龙-6膜上通过紫外光照引发合成了分子印迹聚合物膜, 并用扫描电镜对其表面形态进行了表征. 用紫外分光光谱法研究了模板分子与交联功能单体之间的相互作用. 印迹因子的测定和底物竞争渗透实验结果表明, 分子印迹聚合物膜对模板分子苯磺隆具有较高的选择性, 而非分子印迹聚合物膜没有选择性.     

替代模板分子印迹技术在样品前处理中的应用

分子印迹聚合物具有抗恶劣环境、选择性高、稳定性好等特点,广泛应用于复杂样品的前处理。采用结构类似物作为替代模板分子,可以解决分子印迹聚合物制备时目标物溶解性差的问题,替代模板分子印迹聚合物不仅对目标分析物具有选择性识别能力,还可以避免模板泄露对痕量分析造成的影响。本文综述了替代模板分子印迹技术在样品前处理中的应用进展,包括替代模板分子印迹技术在固相萃取、固相微萃取、色谱固定相、基质固相分散萃取中的应用,最后对替代模板分子印迹技术在未来的样品前处理中的研究进行了展望。     

对硫磷分子印迹聚合物在固相萃取中的应用

采用分子印迹技术,以对硫磷为模板分子,二乙烯三胺为固化剂,环氧树脂为单体,聚乙二醇为致孔剂,制备了具有良好识别性能的分子印迹聚合物.系统考察了对硫磷与其结构类似物在该聚合物上的选择性分离富集特性.用聚合物固相萃取了小白菜中的对硫磷.结果表明,聚合物对模板分子产生了印迹效应,对对硫磷有明显的选择性.本文采用C18色谱柱,...     

氧化石墨烯基异丙隆分子印迹聚合物的制备及其吸附性能研究

以氧化石墨烯为载体,异丙隆为模板分子,采用表面印迹技术制备了分子印迹聚合物。采用透射电子显微镜、拉曼光谱和热重分析仪对该分子印迹聚合物的结构进行了表征,并通过动态平衡结合法研究了该分子印迹聚合物的吸附能力。结果表明:准二级动力学模型很好地拟合了吸附动力学,相关系数(R2)为0.999 7;与非分子印迹聚合物相比,制备的印迹材料表现出高吸附效率和快速的吸附动力学;选择性吸附试验表明该分子印迹聚合物对异丙隆具有选择性和特异性吸附。     

卡维地洛印迹聚合物的合成及其识别性能的研究

以卡维地洛药物分子为模板,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用紫外光引发聚合的分子印迹技术,成功制备出卡维地洛分子印迹聚合物。用热重分析、扫描电镜对聚合物进行了表征,通过Scatchard方程研究了印迹聚合物对模板分子的结合特性。结果表明,在所研究的浓度范围内,印迹聚合物存在一类等价的结合位点,并计算出印迹聚合物与模板分子的平衡离解常数为0.5642 mmol/L,最大表观吸附量为97.44μmol/g,为理论值的63.53%。对不同底物的结合实验表明,该聚合物对卡维地洛具有优良的吸附选择性。     

以分子印迹聚合物为固定相分离和测定氟喹诺酮类药物

以氧氟沙星作为模板分子合成了分子印迹聚合物,并通过高效液相色谱法研究了印迹聚合物的识别特性。实验结果表明,印迹聚合物对模板分子具有很强的亲和力和特定的选择性。作为色谱固定相,氧氟沙星印迹聚合物和目标分子之间的相互作用除了印迹部分的离子和氢键作用外,也存在非印迹部分的疏水作用。同时研究了色谱条件对氟喹诺酮类药物分离的影响。     

氟哌酸分子印迹共混膜的制备及结构表征

以氟哌酸为模板分子,α-甲基丙烯酸为功能单体,三甲氧基丙烷三甲基丙烯酸酯为交联剂,利用本体聚合方法制备了具有特异选择性的氟哌酸分子印迹聚合物,并利用聚砜与氟哌酸分子印迹聚合物共混的方法制备了分子印迹聚合物膜.运用红外光谱分析和透射电子显微镜研究了氟哌酸分子印迹聚合物的结构.运用扫描电子显微镜研究了分子识别膜的机理和吸附性能,运用平衡结合实验法证明了分子识别膜对氟哌酸表现出了较高的选择性.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.