以吡嗪四甲酸为配体的配合物的合成及表征

合成了两种金属配合物{[Cu₂(pztc)(4,4'-bpy)(H₂O)₄]·6H₂O}_n (1),{(H₂bpe)[Cd(pztc)(H₂O)₂]·2.5H₂O}_n (2)(H₄pztc=吡嗪-2,3,5,6-四甲酸,bpy=4,4'-联吡啶,bpe=1,2-二(4-吡啶基)乙烯),测定了其晶体结构,并对其进行了红外光谱、荧光光谱和热重分析等表征。两种配合物均为二维层状结构,但其中吡嗪四酸的配位方式不同。配合物2具有蓝色的荧光,最大荧光发射峰在475 nm。测试了配合物1的电子顺磁共振谱,结果显示Cu²⁺的特征谱带。     

以吡嗪四甲酸为配体的配合物的合成及表征

合成了两种金属配合物{[Cu₂(pztc)(4, 4'-bpy)(H₂O)₄]·6H₂O}_n (1), {(H₂bpe)[Cd(pztc)(H₂O)₂]·2.5H₂O}_n (2)(H4pztc=吡嗪-2, 3, 5, 6-四甲酸, bpy=4, 4'-联吡啶, bpe=1, 2-二(4-吡啶基)乙烯), 测定了其晶体结构, 并对其进行了红外光谱、荧光光谱和热重分析等表征。两种配合物均为二维层状结构, 但其中吡嗪四酸的配位方式不同。配合物2具有蓝色的荧光, 最大荧光发射峰在475 nm。测试了配合物1的电子顺磁共振谱, 结果显示Cu²⁺的特征谱带。     

由2,5-吡啶二羧酸构筑的两种Ln(Ⅲ)配位聚合物的合成、结构及性质的研究

通过水热法合成了两种新型配合物{[La(pydc)(OAc)(H₂O)]·2H₂O}_n(1)和{[Tm₂Cu(pydc)₄(H₂O)₆]·2H₂O}_n(2)(H₂pydc=2,5-吡啶二羧酸), 并对其结构进行了表征。结构分析表明配合物1是由2,5-吡啶二羧酸和醋酸构筑的具有一维方形孔道的复杂三维结构。配合物2中2,5-pydc²-阴离子配体采取μ₂-η¹-η¹-和μ₄-桥连两种配位模式, 呈现出三维的开放式架构。此外, 还进一步对配合物1, 2的热稳定性和配合物2的磁学性质进行了研究。     

以对苯二甲酸及咪唑并[4, 5-f][1,10]邻菲咯啉为配体的镉(Ⅱ)、锌(Ⅱ)配合物的构筑及晶体结构

在水热条件下, 以对苯二甲酸(H₂bdc)和咪唑并[4, 5-f][1, 10]邻菲咯啉(Imphen)为配体构筑了两种配合物[Cd(bdc)(Imphen)(H₂O)]_n·nH₂O (1)和[Zn(bdc)(Imphen)(H₂O)]_n·nH₂O (2), 并利用元素分析和X-射线单晶衍射对其结构进行了表征。结构分析表明:bdc^2-在2个配合物中展示了不同的配位模式, 配合物1和2都具有一维链状结构, 并且都通过分子间氢键和π-π相互作用形成三维网状结构。此外, 对配合物的热稳定性和发光性质也进行了研究。     

由芳香羧酸和1,3,5-三咪唑基苯为配体构筑的锌、镉配合物的合成、结构和荧光性质

通过水热法得到了2个配位聚合物{[Zn(timb)(BTEC)_0.5]·H₂O}_n(1)和{[Cd(timb)(DPA)]·H₂O}_n(2)(timb=1,3,5-三咪唑基苯,H₄BTEC=均苯四甲酸,H₂DPA=2,2-联苯二甲酸),对它们进行了元素分析、红外光谱分析,并利用X射线衍射测定了它们的单晶结构。 配合物1属于三斜晶系,P1空间群。配合物2属于单斜晶系,C2/c空间群。配合物1拥有一个不寻常的三维框架结构,其拓扑为(4.6³·8⁶)₂(4²·8⁴)(6³)₂;而配合物2具有一维单层纳米管结构。结果说明了金属离子和有机羧酸配体在配合物组装过程中起着非常重要的作用。此外,在室温下对2个配合物进行了荧光性质分析。     

由芳香羧酸和1,3,5-三咪唑基苯为配体构筑的锌、镉配合物的合成、结构和荧光性质

通过水热法得到了2个配位聚合物{[Zn(timb)(BTEC)_0.5]·H₂O}_n(1)和{[Cd(timb)(DPA)]·H₂O}_n(2)(timb=1,3,5-三咪唑基苯,H₄BTEC=均苯四甲酸,H₂DPA=2,2-联苯二甲酸),对它们进行了元素分析、红外光谱分析,并利用X射线衍射测定了它们的单晶结构。 配合物1属于三斜晶系,P1空间群。配合物2属于单斜晶系,C2/c空间群。配合物1拥有一个不寻常的三维框架结构,其拓扑为(4.6³·8⁶)₂(4²·8⁴)(6³)₂;而配合物2具有一维单层纳米管结构。结果说明了金属离子和有机羧酸配体在配合物组装过程中起着非常重要的作用。此外,在室温下对2个配合物进行了荧光性质分析。     

三个基于1,5-二(2-乙基苯并咪唑基)-戊烷柔性配体的镉配合物

通过设计柔性配体1,5-二（2-乙基苯并咪唑基）戊烷（bep）,在二羧酸辅助配体的调控下成功制备了3个配位聚合物[Cd（bep）（sba）]_n（1）,[Cd（bep）（bda）]_n（2）,and{[Cd₂（bep）（ada）₂]·H₂O}_n（3）（H₂sba=4,4’-磺酰基二苯甲酸,H₂bda=4,4’-联苯二甲酸,H₂ada=1,3-金刚烷二乙酸）。配合物均呈现二维层状结构。配合物1由交替的Cd（Ⅱ）/bep/sba^2-螺旋链构成。配合物2由Cd/bda^2-单元构成二维结构,bep作为单齿配体与Cd（Ⅱ）配位。配合物3的二维层通过Cd/ada^2-/H₂O氢键螺旋链拓展成三维超分子。此外,对配合物1~3的粉末X射线衍射、热稳定性以及荧光性质进行了研究。     

2,5-噻吩二甲酸与菲咯啉构筑的稀土配合物:晶体结构，荧光性质和对Cu2+离子的荧光传感

稀土硝酸盐和2,5-噻吩二甲酸与菲咯啉在水热反应条件下合成了3个新的配合物,[Ln（2,5-tdc）_1.5（phen）（H₂O）]_n（Ln=Gd（1）,Tb（2）,Dy（3）;2,5-tdc=2,5-噻吩二甲酸根,phen=菲咯啉）。通过X射线单晶衍射确定了它们的晶体结构。配合物1~3为同构的2D网络结构。配合物1在340 nm激发下出现最大发射中心位于366和387 nm的宽峰,可归属于配体的π^*-π跃迁发射。配合物2在365 nm紫外灯照射下发绿光,其荧光发射光谱中出现了4个尖峰,位于491、545、588和620 nm处,对应于Tb³⁺的⁵D₄→⁷F_J（J=6~3）跃迁。配合物2的荧光寿命显示为单指数衰减,其值为（0.123±0.005）ms。配合物3的发射光谱中出现了2个尖峰,位于482和575 nm处,分别对应于Dy³⁺的⁴F_5/2→⁶H_15/2和⁴F_5/2→⁶H_13/2跃迁。另外,研究了配合物2的荧光传感能力,该配合物可作为荧光探针检测水溶液中的Cu²⁺离子。     

三个基于1，5-二(2-乙基苯并咪唑基)-戊烷柔性配体的镉配合物

通过设计柔性配体1,5-二（2-乙基苯并咪唑基）戊烷（bep）,在二羧酸辅助配体的调控下成功制备了3个配位聚合物[Cd（bep）（sba）]_n（1）,[Cd（bep）（bda）]_n（2）,and{[Cd₂（bep）（ada）₂]·H₂O}_n（3）（H₂sba=4,4’-磺酰基二苯甲酸,H₂bda=4,4’-联苯二甲酸,H₂ada=1,3-金刚烷二乙酸）。配合物均呈现二维层状结构。配合物1由交替的Cd（Ⅱ）/bep/sba^2-螺旋链构成。配合物2由Cd/bda^2-单元构成二维结构,bep作为单齿配体与Cd（Ⅱ）配位。配合物3的二维层通过Cd/ada^2-/H₂O氢键螺旋链拓展成三维超分子。此外,对配合物1~3的粉末X射线衍射、热稳定性以及荧光性质进行了研究。     

桑色素金属(Ⅱ)固体配合物的抗氧性研究

本文报道了五种金属(Ⅱ)桑色素固体配合物的合成。通过元素分析、溶解度、摩尔电导、红外光谱、热重差热、核磁共振氢谱和荧光分析测定了配合物的组成和性质,结果表明配合物组成为ML₂·nH₂O[M=Mn(Ⅱ)、Co(Ⅱ)、Ni(Ⅱ)、Cu(Ⅱ)、Zn(Ⅱ);L=Morin(失去2′-OH中质子);n=2或3]。并对配体、配合物进行了脂质过氧化物生成的抑制和清除O₂^-·自由基的对比研究。     

SYNTHESIS AND REACTIONS OF SOME 2-THIENYL- AND 2-THENOYL-DERIVATIVES OF THIAZOLE AND THIADIAZOLINE AND THEIR SELENIUM ANALOGS

Abstract

2-(Thiocyanatoacetyl)thiophene 2 and its selenium analog 3 couple with diazotized anilines and yield 3-aryl-2-imino-5-(2-thenoyl)-2,3-dihydro-1,3,4-thiadiazoles 6 and 3-aryl-2-imino-5-(2-thenoyl)-2,3-dihydro-1,3,4-selenadiazoles 7 respectively. The reactions of both 6 and 7 with nitrous acid, acetic anhydride and benzoyl chloride are described. Azo coupling of 2-amino-4-(2-thienyl)thiazole 17 and its selenazole analog 18 with diazotized anilines yielded the arylazo derivatives 19 and 20 respectively. Reaction of the hydrazidoyl bromide 16 with potassium thiocyanate, potassium selenocyanate, thiourea and selenourea yields 6, 7, 19, and 20 respectively.     

PHOTOLYSIS AND RADIOLYSIS OF NITROMETHANE AND NITROETHANE

Abstract— Prolonged photolysis of nitromethane and nitroethane in liquid and vapour phases, with simultaneous photolysis of the nitrogen dioxide formed, was studied in the absence and presence of cupric oxide. A high-pressure quartz immersion lamp providing the full range of visible and u.v. spectrum, with a high output of radiation at 366 and 313 mμ, was employed as source of light. The products of photolysis were detected by microanalytical methods, infrared-absorption spectrum analysis and gas chromatography. Photolysis of liquid nitro-alkanes resulted in formation of many compounds; saturated hydrocarbons, and in the case of nitroethane, ethylene, were submitted to detailed examination. Photolysis in the vapour phase was carried out in a specially designed glass apparatus. The main products were nitrogen dioxide, aldehydes and polyaldehydes; hydrocarbons were not estimated.
Liquid nitromethane and nitroethane were also irradiated with γ-rays from a ⁶⁰Co source. The radiolysis products were similiar to those obtained on photolysis. The mechanism of photolytic decomposition of nitroalkanes is proposed and discussed.     

聚壬酰胺的制备纺丝及结构与性能测定

9-氨基壬酸系从癸二酸经单酯化、氨化和Hofmann重排制得。该单体以10克规模在玻璃管中和以4公斤量在15升聚合釜中,于260℃聚合成聚壬酰胺。聚合物在288℃纺丝,120℃牵伸,得到尼龙-9纤维。测定了聚合物和纤维的结构和多种性能。     

温度及pH敏感N-异丙基丙烯酰胺/β-环糊精水凝胶的合成与性能研究

用顺丁烯二酸酐 (MAH)对具有分子包结能力的 β 环糊精 (β CD)进行化学改性 ,合成出了丁烯二酸单酯化 β CD单体 (MAH β CD) .通过氧化还原自由基引发MAH β CD与N 异丙基丙烯酰胺 (NIPA)聚合 ,合成出含 β CD结构单元的新型水凝胶 .用核磁共振、红外光谱及元素分析对MAH β CD单体及共聚物的结构和组成进行了表征 .溶胀研究结果表明 ,该水凝胶具有较好的pH、温度及离子强度敏感性 ;并且水凝胶在较高羧基(—COOH)含量和弱碱环境中 ,仍能表现出明显的温敏性     

CHLOROPHYLL a AND CAROTENOID AGGREGATES AND ENERGY MIGRATION IN MONOLAYERS AND THIN FILMS

Abstract— The spectra of absorption, fluorescence and excitation of monolayers and thin films containing chlorophyll a together with a carotenoid (cis-β-carotene, trans-β-carotene, fucoxanthin, or zeaxanthin), were measured at — 196°C. The concentration ratios used, (Chl)/(Car), were 6:1, 4:1, 3:1, 2:1, 1:1 and 1:3, and the area densities, 3·70, 2·55, 1·76, 0·71, 0·37 and 0·17 nm²/pigment molecule. In dilute monolayers, (3·70 nm²/molecule), with a constant concentration ratio (Chl)/(Car) = 3:1, evidence of three β-carotene forms, with absorption bands at 460, 500 and 520 nm (C₄₆₀, C₅₀₀ and C₅₂₀), and of a chlorophyll a form with an absorption band at 669–672 (Chl_669–672) was found. On increasing the density to 0·2–0·3 nm²/molecule, a conversion of C₄₆₀ and C₅₂₀ into C₅₀₀, was observed, and several more additional (probably more strongly aggregated) chlorophyll a forms appeared, with absorption bands at 672–733 nm. With excess carotene [(Chi)/(Car) = 1:3] the forms C₄₆₀, C₅₀₀, C₅₂₀ and Chl_669–672 were present even in the most dense films (0·2–0·3 nm²/molecule). The same was found with other carotenoids: if one of the pigments was in excess, aggregated forms of the other tended to disappear. In the transfer of energy from carotenoids to chlorophyll a, C₅₀₀ was found to be the main donor. In layers with a concentration ratio (Chl)/(Car) = 3:1, the efficiency of transfer was less than 10 per cent at the lowest density used (3·70 nm²/molecule); it increased to 50 per cent, as the density was increased to 0·20 nm²/molecule. When the relative concentration of the carotenoid was increased to (Chl)/(Car) = 1:1, the efficiency of energy transfer dropped to 25 per cent even at 0·20 nm²/molecule. It seems that the efficiency of energy transfer between carotene molecules (prior to its transfer to chlorophyll a) is low, and effective transfer occurs only between β-carotene and immediately adjacent chlorophyll a molecules.     

生物质热解、加氢热解及其与煤共热解的热重研究

在加压热天平上用非等温热重法进行生物质（锯末、稻壳）在Ｎ２气氛下的热解和加氢热解研究。考察了升温速率（５～２５℃／ｍｉｎ）和压力（０．１～７ＭＰａ）的影响，求取了热解动力学参数，并研究了生物质与煤在常压Ｎ２气下的共热解过程。研究结果表明：生物质在４００℃左右即完成热解反应，总失重率大于７０％（Ｗ％，ｄａｆ．），热解时仅一个峰位于３００℃左右；与煤热解行为相同，随升温速率及压力的升高，转化率下降，ＤＴＧ峰移向高温，但由于热解反应在较低温度下进行，氧气的存在对生物质热解ＴＧ和ＤＴＧ的影响远小于煤热解。证明生物质热解以其内部氢对自由基的饱和及分子重排反应为主。生物质热解可用一级反应动力学处理，主要热解阶段及表现活化能分别为：锯末，２６７～３１４℃，６９．６６ｋＪ／ｍｏｌ；稻壳，２８３～３１０℃，５３．４５ｋＪ／ｍｏｌ；生物质由于与煤的热分解温度相差很大，因而在其共热解过程中无协同作用。     

SURFACE ENTHALPY AND ENTROPY AND THE PHYSICO-CHEMICAL NATURE OF HYDROPHOBIC AND HYDROPHILIC INTERACTIONS

The attractive Interactions between typically hydrophobic molecules such as hexane or CCl₄, and the repulsive Interactions between extremely hydrophilic molecules such as poly(ethylene oxide) (PEO), when immersed in water, as well as the interactions between these molecules and water, have been examined from a surface thermodynamic viewpoint, taking the changes in surface free energy into account, as a function of temperature. It was found that attractive hydrophobic Interactions are not, as vas generally believed up to now, invariably entropic. Hydrophobic Interactions can be mainly enthalpic or mainly entropic, or more or less equal mixtures of both, depending on each individual case; however, all hydrophobic interactions are polar (in the sense of Lewis acid-base) in nature. Repulsive hydrophilic interactions are enthalpic, and also polar in nature. The interaction between hydrophobic solutes and water is mainly enthalpic, and is apolar in nature.     

MECHANICS AND THE EVOLUTION AND FUNCTIONAL MORPHOLOGY OF CONCHOSTRACAN CARAPACE MECHANICS AND THE EVOLUTION AND FUNCTIONAL MORPHOLOGY OF CONCHOSTRACAN CARAPACE

Conchostracans, with a laterally compressed body enclosed between two symmetric valves, live swimming in fresh or brackish water. The carapace valve has a number of growth bands with various sculptures. The general trend of sculptural evolution is from smooth to punctate-minute polygon-medium reticulation-large reticulation, while these punctate, polygonal and various reticulate patterns may separately develop into various radial ridges. The development of sculpture can be well explained by mechanical principle. Functional morphology of carapace is discussed in the light of mechanics in this paper.     

四个酰基硫脲衍生物及其配合物的合成与表征

本文报道了四个Ｎ－酰基硫脲衍生物及其Ｃｕ＾２＋，Ｎｉ＾２＋，Ｃｄ＾２＋，Ｓｎ＾４＋配合物的合成。用质谱、红外光谱、紫外光谱对它们进行了结构、性质表征。配体与金属离子配位主要是通过硫原子进行，配合物都是非离子型的。