LaPO4∶Eu3+—Fe3O4光-磁复合材料的合成与性能研究

采用2步水热法合成了LaPO4∶Eu3+-Fe3O4复合材料.在LaPO4∶Eu3+-Fe3O4复合材料中,LaPO4∶Eu3+为单斜晶相,呈纳米棒状,纳米棒的直径和长度分别为20~100nm和0.2~1μm;Fe3O4为正交晶相、呈20~30nm的颗粒状,Fe3O4粒子紧紧附着在LaPO4∶Eu3+纳米棒的表面;样品的磁性和发光性质研究表明所合成的LaPO4∶Eu3+—Fe3O4复合材料既具有发光性质又具有磁性.     

Gd3Ga5O12∶Eu3+发光纳米晶的燃烧合成及性质

以尿素为燃烧剂,乙二醇为分散剂采用燃烧法制备了Gd3Ga5O12∶Eu3+纳米晶。利用X射线衍射、电镜和荧光光谱对前驱体和热处理后样品的结构、形貌和发光性能进行了表征。XRD结果表明:700℃热处理2 h即可获得立方结构Gd3Ga5O12∶Eu3+纳米晶。根据Scherrer公式估算经700℃和900℃热处理2 h获得的纳米晶的一次性粒径分别为28 nm和42 nm。发射光谱和激发光谱的结果表明:特征发射峰来自于5D0-7FJ跃迁,而来自于Eu3+的5D0→7F1的磁偶极跃迁发射最强;宽激发带主要来自于Eu-O电荷迁移带和Gd3Ga5O12基质吸收。发射强度和激发强度随热处理温度的提高而增强。     

Gd_2O_3:Eu~(3+)纳米棒的制备与发光性能

在表面活性剂辅助的水热条件下合成出尺寸均一的Gd2O3:Eu3+纳米棒,对其结构和荧光性质进行了表征,并对其生长机理进行了初步讨论.XRD结果表明,水热前驱体样品为六方晶相的Gd(OH)3,经过灼烧之后样品为立方相的Gd2O3.TEM照片表明,所得样品为直径60 nm,长度约600 nm的纳米棒.荧光光谱表明,在波长为254 nm 的紫外光激发下,Gd2O3:Eu3+纳米棒产生了不同于前驱体的特征红光发射,对应于Eu3+ 的5D0-7F2跃迁,表明Gd2O3是红色发光材料的良好基质.     

Schiff碱铕配合物的合成及性质

在甲醇中合成了2-乙酰基苯并咪唑缩牛磺酸Schiff碱型配体及其与Eu(Ⅲ)的配合物。 通过Eu化学和元素分析、质谱、核磁共振谱、红外光谱、激光拉曼光谱、三维荧光光谱,确定了配体与配合物的组成及结构。 Eu(Ⅲ)配合物为Eu2L3(NO3)3(L=C11H12N3O3S)。 配合物荧光发射主要是Eu3+微扰的配体发光,其次为中心Eu3+离子的窄带发射。 当λex=330.0 nm时,配合物发射Eu3+离子的特征窄带荧光;当λex=410.0 nm时,Eu3+发射λem=525.0 nm的荧光。     

高温固相法合成R_(2-x)(MoO_4)_3∶xEu~(3+)(R=Y,Gd)红色荧光粉的研究

采用高温固相法合成R2-x(MoO4)3∶xEu3+(R=Y,Gd)系列红色荧光粉.研究了煅烧温度、助熔剂的含量和Eu3+的掺杂量对样品发光性能的影响,并对样品的物相组成、激发和发射光谱进行分析.结果表明,样品Gd0.6(MoO4)3∶1.4Eu3+在800℃左右煅烧时呈单斜晶结构,当煅烧温度提高到950℃左右,呈正交斜晶结构;样品Y0.2(MoO4)3∶1.8Eu3+在800℃左右煅烧时已经完全形成了正交结构,当煅烧温度升高到1000℃左右时,其正交结构得到保持,没有发生相变.其中,助熔剂NH4Cl的含量占样品总量的3%,煅烧温度为1000℃,保温3h得到的样品Gd0.6(MoO4)3∶1.4Eu3+和Y0.2(MoO4)3∶1.8Eu3+的发光性能达到最佳.另外,由激发和发射光谱分析表明,该荧光粉可以被近紫外光(395nm)和蓝光(465nm)有效激发,发射峰值位于612nm的红光,对应于Eu3+离子的5 D0→7 F2跃迁,是一种可应用在紫外光和蓝光芯片激发产生白光LED的红色荧光粉.     

Gd_3Al_5O_(12)∶Eu~(3+)柠檬酸盐硝酸盐燃烧法合成及其发光性能研究

采用柠檬酸盐硝酸盐燃烧法,在较低的温度(900℃)下成功地合成单一晶相Gd3Al5O12∶Eu3+发光粉体,紫外激发荧光光谱分析表明,粉体615 nm和593 nm荧光发射源于Eu3+的5D0-7F2和5D0-7F1跃迁.该方法中各工艺条件(如pH值、柠檬酸/金属离子比、煅烧温度)对Gd3Al5O12∶Eu3+发光性能均有影响,通过试验得出了获得最佳发光性能荧光粉体的工艺参数.     

静电纺丝技术制备Gd3Ga5O12:Eu3+多孔发光纳米带

采用静电纺丝技术制备了PVP/[Gd(NO3)3+Ga(NO3)3+Eu(NO3)3]复合纳米带,将其进行热处理,得到了Gd3Ga5O12:Eu3+(简称GGG:Eu3+)多孔发光纳米带.采用XRD,SEM,TEM,TG-DTA,FTIR和荧光光谱等技术对样品进行了表征.PVP/[Gd(NO3)3+Ga(NO3)3+Eu(NO3)3]复合纳米带为非晶态,经800 ℃焙烧8 h后,获得了单相石榴石型的GGG:Eu3+纳米带,属于立方晶系,空间群为Ia3d.复合纳米带表面光滑,尺寸均一,平均宽度约10 μm,厚度约为100 nm,彼此没有交联;经800 ℃焙烧后GGG:Eu3+多孔纳米带平均宽度约2.5 μm,厚度30 nm,长度大于500 μm,呈多孔网状多晶结构.当焙烧温度高于700 ℃时,复合纳米带中DMF、有机物和硝酸盐分解挥发完全,总失重率为93.1%.焙烧温度为800 ℃时,生成了纯净的无机氧化物.在254 nm的紫外光激发下,GGG:Eu3+纳米带发射出主峰位于591 nm的明亮红光,属于Eu3+的 5D0→7F1跃迁.对GGG:Eu3+纳米带形成机理进行了讨论.     

纳米稀土磷酸盐红色荧光粉的合成及性能

以Gd,Y和Eu的硝酸盐与(NH4)2HPO4为原料,采用室温固相反应合成出前驱体,再经过900℃煅烧2h得到(Gd,Y,Eu)PO4纳米荧光粉,运用TG-DTA、XRD、TEM、固体荧光等技术,研究了荧光粉的形成过程、晶体尺寸、形貌及发光性能.结果表明:荧光粉属于单斜晶系,独居石结构的正磷酸盐,空间群为P21/n,平均粒径为60 nm,分散性好,有较高的热稳定性.在396 nm紫外光激发下,纳米荧光粉发出Eu3+的特征红色荧光,发射主峰在613nm,归属于Eu3+离子的5D0→7F2跃迁,该纳米粉体是一种性能优良的荧光材料.     

Gd2O3∶Eu3+纳米棒的制备与发光性能

在表面活性剂辅助的水热条件下合成出尺寸均一的Gd2O3∶Eu3+纳米棒, 对其结构和荧光性质进行了表征, 并对其生长机理进行了初步讨论. XRD结果表明, 水热前驱体样品为六方晶相的Gd(OH)3, 经过灼烧之后样品为立方相的Gd2O3. TEM照片表明, 所得样品为直径60 nm、长度约600 nm的纳米棒. 荧光光谱表明, 在波长为254 nm 的紫外光激发下, Gd2O3∶Eu3+纳米棒产生了不同于前驱体的特征红光发射, 对应于Eu3+ 的5D0-7F2跃迁, 表明Gd2O3是红色发光材料的良好基质.     

共沉淀法合成稀土正磷酸盐(La,Gd)PO4:RE3+(RE=Eu,Tb)及其真空紫外光谱特性

采用共沉淀法制备了稀土正磷酸盐荧光粉(La,Gd)PO4:RE3+(RE=Eu,Tb).红外光谱分析发现GdPO4的红外光谱吸收峰与LaPO4一致,只是峰位向高波数方向移动.(La,Gd)PO4:RE3+的真空紫外光谱特性研究表明,Gd3+在能量传递过程中起中间体作用.XPS研究揭示,LaPO4的价带由O2-的2p能级构成,而GdPO4的价带则是由O2-的2p能级和Gd3+的4f能级共同构成.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.