声光可调-近红外光谱技术分析烟草主要化学成分

建立了声光可调-近红外光谱方法(AOTF-NIR)检测烟草主要化学成分的方法。应用AOTF-NIR光谱仪测定了不同地区、不同等级烟草样品的近红外光谱,用Unscrambler(定量分析软件将光谱与对应的化学成分值相关联,建立了烟草中总糖、还原糖、总烟碱和钾的回归模型。用这些模型对未知样品进行了预测。总糖、还原糖、总烟碱和钾模型预测的平均相对标准偏差分别为2.71%、3.13%、4.04%和6.42%。     

近红外光谱法快速检测烟草中部分香气物的应用研究

应用傅立叶变换近红外漫反射光谱仪,从500个样品中按高、中、低含量挑选出具代表性的150～172个烟草样品建立了近红外光谱与烟草中的苹果酸、柠檬酸和石油醚提取物成分含量间的数学模型,用建立的模型对36个样品进行预测,结果表明,各成分近红外预测值与实测值之间的平均偏差:苹果酸为0.090,柠檬酸为0.040,石油醚提取物为0.124;且近红外预测值与化学法不存在显著性差异,近红外光谱分析技术可初步用于烟草部分香气成分的快速定量分析.     

无信息变量消除法变量筛选优化烟草中总氮和总糖的定量模型

应用近红外光谱技术对烟草常规化学成分中总氮和总糖进行了测定。无信息变量消除(UVE)剔除光谱矩阵中没有有效信息的数据点,并用偏最小二乘方法(PLS)建立总氮和总糖的定量分析模型,外部检验对模型效果进行了评价。总氮定量模型校正集的决定系数R2为93.35%,标准偏差SEC为0.10;外部检验集的决定系数R2为94.09%,标准偏差SEP为0.11,相对标准偏差RSD为6.12%;总糖的定量模型校正集的决定系数R2为98.20%,标准偏差SEC为0.95;外部检验集样品的决定系数R2为98.01%,标准偏差SEP为0.78,相对标准偏差RSD为2.93%。结果表明:采用UVE建立的总氮与总糖的模型优于用全谱建立的模型,UVE提高了PLS模型的预测能力。     

支持向量机回归法在近红外光谱测定植物纤维原料中甲氧基含量中的应用

以26个植物纤维原料为实验材料,由20个样品作校正样品,采用径向基核函数方法对纤维原料中甲氧基含量与纤维原料样品近红外光谱进行支持向量机(SVM)回归建模.以所建SVM回归模型对6个纤维原料样品中甲氧基含量进行预测,回归模型的预测结果与采用改良的维伯克法确定的甲氧基含量的相关系数为0.977,预测样本集的标准偏差为0.43.将SVM回归模型的预测效果与PLS回归模型的预测结果进行比较,所建近红外光谱测定植物纤维原料中甲氧基含量的SVM回归模型可用于实际植物纤维原料样品的定量分析,且具有较好的分析效果.     

光谱采集方式对AOTF-近红外光谱技术分析烟草主要化学成分的影响

初步探讨了不同光谱采集方式对AOTF-近红外光谱技术检测烟草主要化学成分及建模的影响。结果表明,以旋转方式采集光谱可以得到更多的样品信息,所建立的模型精度较高。从模型的各项指标来看,总糖、还原糖和总烟碱的相关系数很高,说明化学成分含量数据和光谱数据间有较好的相关性。实验结果表明AOTF-近红外光谱技术可用于烟草样品主要化学成分的常规分析。     

“动态”近红外光谱结合深度学习图像识别和迁移学习的模式识别方法研究

该文以山羊绒与山羊绒/羊毛混纺织物以及纯棉与丝光棉织物为研究对象,使用其"动态"光谱,扩大类间的光谱差异信息,通过融合其同步和异步二维相关光谱,用多张动态光谱构造一张能反映细节化学差异信息的"化学图像"。使用GoogLeNet深度神经网络图像识别模型结合迁移学习,建立了一种光谱分类的新方法。收集了234个织物样品,制备水含量分别为0、5.4%、11.2%和16.3%的样本,同时采集样品的漫反射近红外光谱。使用干基样品的多种预处理光谱,利用线性分类方法簇类独立软模式识别(SIMCA)和非线性方法支持向量机(SVM),共建立了16个分类模型。其中,山羊绒与山羊绒/羊毛混纺织物的SIMCA和SVM最优预测正确率分别为63.33%和70.09%,纯棉与丝光棉织物的分别为71.02%和72.51%,均不能实现有效分类。新方法对山羊绒与山羊绒/羊毛混纺织物的预测正确率为92.59%,纯棉与丝光棉织物的为94.74%,获得了有效分类。该文首次将图像分类方法用于光谱分类识别,开辟了一种新的研究途径。针对实际应用能收集到的样品属于小样本,不能满足深度学习需要大数据样本的问题,使用迁移学习方法使深度学习框架适应了光谱分类(小样本),为人工智能领域中先进的识别技术用于解决化学问题提供了一个成功示范。     

近红外光谱与组合的间隔偏最小二乘法测定清开灵四混液中总氮和栀子苷的含量

应用近红外光谱分析技术结合化学计量学方法, 建立了中药清开灵注射液中间体总氮和栀子苷含量测定的新方法. 首先采用Kernard-Stone法对训练集样本和预测集样品进行分类, 然后应用组合的间隔偏最小二乘法(Synergy interval partial least squares, siPLS)对所得近红外透射光谱进行有效谱段范围的选择以及二者定量校正模型的建立, 并对光谱预处理方法进行了详细的讨论. 所建立的总氮和栀子苷校正模型的预测相关系数(R)分别为0.999和0.708; 交叉验证误差均方根(RMSECV)均为0.023; 预测误差均方根(RMSEP)分别为0.074和0.159; 预测结果表明, 本实验所建方法快速、无损且可靠, 可推广并应用于中药注射液中间体的在线质量控制.     

近红外光谱结合LSTSVM算法判别不同等级烟叶

本文用近红外光谱结合最小二乘双胞胎支持向量机(LSTSVM)算法建立了烟叶等级分类模型。从三个等级共210个烟叶样品中,取出120个样品作为建模集,剩余90个样品作为预测集。为了建立最优模型,对光谱预处理方法和模型参数进行筛选优化,最优模型对预测集样品的平均识别率为95.56%,结果表明该方法可以作为烟叶等级分类的一种有效方法。此外,将该算法与SIMCA、PLS-DA、SVM等三种常见的模式识别算法进行了比较,结果表明基于样品的原始光谱,同等条件下,LSTSVM算法的预测效果优于其他三种算法。     

近红外光谱法快速测定柴胡提取过程中的药效成分

利用近红外光谱(NIRS)技术对柴胡提取过程中的药效成分进行快速定量分析。共收集126个柴胡提取液样品,采用紫外-可见分光光度法测定总黄酮和多糖的含量,高效液相色谱法(HPLC)测定柴胡皂苷A及柴胡皂苷D的含量,以透射模式采集提取液的近红外光谱,运用偏最小二乘法(PLS)分别建立了近红外光谱与4种药效指标参考值之间的定量校正模型,并采用不同的预处理方法、光谱波段和主因子数对模型进行优化。结果表明,总黄酮、多糖、柴胡皂苷A和柴胡皂苷D 4种定量模型的近红外预测值与参考值之间的拟合性良好,模型预测精度较高,其中预测集相关系数(RP)均大于0.9;预测集误差均方根(RMSEP)分别为3.46 μg/mL、0.743 mg/mL、1.53 μg/mL、0.406 μg/mL;预测集相对偏差(RSEP)分别为1.65%、8.28%、5.74%、7.52%。该研究证实了NIRS结合PLS可成功应用于监测柴胡提取液中药效成分的含量变化,且方法具有快速、准确、无损和环保的特点。     

PLS-BP法近红外光谱技术同时测定鲜乳中四种主成分

基于近红外光谱技术,将偏最小二乘法(Partial Least Squares,PLS)和单隐层的反向传播网络(Back-Propagation Network,BP)联用并测定了鲜乳中4种主成分含量.用PLS法将原始数据压缩为主成分,取前3个主成分的14个数据输入网络,以Kolmogorov定理为依据,经过实验确定中间层的神经元个数为29,初始训练迭代次数为1000,建立了脂肪、蛋白质、乳糖、牛乳总固体4种主成分含量的预测校正模型.PLS-BP模型对样品4个组分含量的预测决定系数(R2)分别为:0.961、0.974、0.951、0.997;本研究为近红外光谱技术在鲜乳多组分快速检测提供了新思路.     

Quantitative analysis of routine chemical constituents in tobacco by near-infrared spectroscopy and support vector machine

It is important to monitor quality of tobacco during the production of cigarette. Therefore, in order to scientifically control the tobacco raw material and guarantee the cigarette quality, fast and accurate determination routine chemical of constituents of tobacco, including the total sugar, reducing sugar, Nicotine, the total nitrogen and so on, is needed. In this study, 50 samples of tobacco from different cultivation areas were surveyed by near-infrared (NIR) spectroscopy, and the spectral differences provided enough quantitative analysis information for the tobacco. Partial least squares regression (PLSR), artificial neural network (ANN), and support vector machine (SVM), were applied. The quantitative analysis models of 50 tobacco samples were studied comparatively in this experiment using PLSR, ANN, radial basis function (RBF) SVM regression, and the parameters of the models were also discussed. The spectrum variables of 50 samples had been compressed through the wavelet transformation technology before the models were established. The best experimental results were obtained using the (RBF) SVM regression with gamma=1.5, 1.3, 0.9, and 0.1, separately corresponds to total sugar, reducing sugar, Nicotine, and total nitrogen, respectively. Finally, compared with the back propagation (BP-ANN) and PLSR approach, SVM algorithm showed its excellent generalization for quantitative analysis results, while the number of samples for establishing the model is smaller. The overall results show that NIR spectroscopy combined with SVM can be efficiently utilized for rapid and accurate analysis of routine chemical compositions in tobacco. Simultaneously, the research can serve as the technical support and the foundation of quantitative analysis of other NIR applications.     

Non-destructive determination of metronidazole powder by using artificial neural networks on short-wavelength NIR spectroscopy

The present study aimed at providing a new method in sight into short-wavelength near-infrared (NIR) spectroscopy of in pharmaceutical quantitative analysis. To do that, 124 experimental samples of metronidazole powder were analyzed using artificial neural networks (ANNs) in the 780-1100 nm region of short-wavelength NIR spectra. In this paper, metronidazole was as active component and other two components (magnesium stearate and starch) were as excipients. Different preprocessing spectral data (first-derivative, second-derivative, standard normal variate (SNV) and multiplicative scatter correction (MSC)) were applied to establish the ANNs models of metronidazole powder. The degree of approximation, a new evaluation criterion of the networks was employed to prove the accuracy of the predicted results. The results presented here demonstrate that the short-wavelength NIR region is promising for the fast and reliable determination of major component in pharmaceutical analysis.     

近红外光谱法快速测定涂料固化剂中游离甲苯二异氰酸酯含量

用气相色谱分析值为参照,采用近红外透射光谱（NIR）技术采集相应样品的NIR光谱,研究了涂料固化剂中游离甲苯二异氰酸酯（TDI）含量的快速测定分析方法。 并从120个固化剂样品中挑选出109个代表性的样品建模,选择7320~7250 cm-1和8485~8370 cm-1波段区间,用偏最小二乘法(PLS)和完全交互验证方式建立TDI含量的预测模型。 结果表明,固化剂中游离甲苯二异氰酸酯含量和近红外光谱之间存在较好的相关性,其预测模型的校正集均方差（RMSEC）为0.0815,验证集均方差（RMSEP）为0.0715,模型性能良好。 近红外光谱法可快速准确测定游离甲苯二异氰酸酯（TDI）含量,用于固化剂样品快速分析。     

Artificial neural network for simultaneous determination of two components of compound paracetamol and diphenhydramine hydrochloride powder on NIR spectroscopy

Diffuse reflectance near-infrared (NIR) spectroscopy is a technique widely used for rapid and non-destructive analysis of solid samples. A method for simultaneous analysis of the two components of compound paracetamol and diphenhydramine hydrochloride powdered drug has been developed by using artificial neural network (ANN) on near-infrared (NIR) spectroscopy. An ANN containing three layers of nodes was trained. Various ANN models based on pretreated spectra (first-derivative, second-derivative and standard normal variate; SNV) were tested and compared, respectively. In the models the concentration of paracetamol and caffeine as active principles of compound paracetamol and diphenhydramine hydrochloride powder was determined simultaneously. Partial least squares regression (PLS) multivariate calibrations were also used, which were compared with ANN. The best model was obtained at first-derivative spectra. We have also discussed the parameters that affected the networks and predicted the test set (unknown) specimens. The degree of approximation, a new evaluation criteria of the network were employed, which proved the accuracy of the predicted results.     

苯乙烯/丙烯酸正丁酯乳液聚合反应过程中残余单体含量的实时监测

采用近红外光谱分析技术在线测量苯乙烯(St)/丙烯酸正丁酯(BA)乳液聚合体系中残余单体的含量. 共设计9个半连续方式的St/BA乳液共聚反应, 在反应过程中实时取样测量其残余单体含量, 并记录取样时刻对应的聚合体系的近红外光谱. 采用多元散射校正法(MSC)处理光谱, 有效地克服了乳胶粒子散射效应对近红外光谱分析的影响. 采用主成分分析法(PCA)对乳液体系的近红外光谱数据进行了解析. 选取6个聚合反应对应不同反应时间的72个样品, 用于建立校正模型, 另外3个聚合反应共取36个样品用于校正模型的验证, 并在反应设计上体现了乳化剂用量的变化, 从而使校正模型对乳化剂用量的变化具有一定的适应性. 研究结果表明, 所得模型对残余单体St和BA含量的预测结果标准差(SEP)分别为0.08026和0.05305.     

近红外光谱主成分-所有可能回归法定量分析烤烟、小麦样品中的组分含量

利用主成分-所有可能回归法,建立了烤烟、小麦样品不同组份的近红外光谱定量分析模型。结果表明,烤烟样品的总糖、还原糖以及小麦样品的蛋白质含量的预测模型均有好的定量分析结果,且其预测结果与PLS法预测结果相当。     

Calibration model transfer for near-infrared spectra based on canonical correlation analysis

In order to solve the calibration transformation problem in near-infrared (NIR) spectroscopy, a method based on canonical correlation analysis (CCA) for calibration model transfer is developed in this work. Two real NIR data sets were tested. A comparative study between the proposed method and piecewise direct standardization (PDS) was conducted. It is shown that the transfer results obtained with the proposed method based on CCA were better than those obtained by PDS when the subset had sufficient samples.     

ICA方法与NIR技术用于药片中活性成分含量的测定

用独立分量分析(ICA)方法提取药片近红外光谱数据矩阵的独立成分和相应的混合矩阵, 再用BP神经网络对混合矩阵和药片中活性成分的浓度矩阵进行建模, 提出了新的药片活性成分含量测定的基于独立分量分析-神经网络回归(ICA-NNR)的近红外光谱分析方法. 通过分析独立分量数和网络中间隐层的神经元数对模型性能的影响, 分别建立三类药片定量分析的最优模型. 该方法用于实测的三类药片中活性成分含量的测定, 测试样品集的化学检测值与近红外预测值的相关系数分别达到0.962, 0.980及0.979. 结果表明, 基于ICA-NNR的近红外光谱分析方法对制药业的药片进行定量分析是可行的.     

Application of Grey-correlated Spectral Region Selection in Analysis of Near-infrared Spectra

The optimal selection method of spectral region based on the grey correlation analysis was applied in the analysis of near-infrared(NIR) spectra. In order to compute “characteristic” spectral region, 160 samples of tobacco were surveyed by NIR. Next, the whole spectral region was randomly divided into six regions, and the values of association coefficients and correlation orders of different regions were computed for total sugar, reducing sugar and nicotine. Moreover, two regions that owned the largest value of association coefficient were regarded as “characteristic” spectral region of a model. Finally, the quantitative analysis models of different components were established via the partial least squares method, and the common selection methods of spectral region were compared. The simulation results indicate that the models to choose the spectral region based on grey correlation analysis are more effective than the common selection methods of spectral region, the optimized time of algorithm is shorter, the prediction precision of the models is higher and generalization ability for quantitative analysis results is stronger. This research can provide the support for the quantitative analysis models of NIR spectra and new idea for commercial analysis software of NIR. So, it has a high application value in the analysis of NIR spectra.     

Prediction of sensory properties of espresso from roasted coffee samples by near-infrared spectroscopy

Thirty-five representative and suitably selected roasted coffee samples were characterised by near-infrared (NIR) spectroscopy and used to prepare the corresponding espresso samples to be subsequently subjected to sensory evaluation by trained panellists. The main purpose was to investigate the relationships between certain crucial sensory attributes of espresso coffees, including perceived acidity, mouthfeel, bitterness and aftertaste, and near-infrared spectra of original roasted coffee samples, in such a way that non-destructive near-infrared reflectance measurements would be used to predict all these sensory properties with a decisive influence from a quality assurance standpoint. Separate calibration models based on partial least squares regression (PLS), correlating NIR spectral data of roasted coffee samples with each sensory attribute of espresso samples studied, were developed. Wavelength selection was also performed applying iterative predictor weighting-PLS (IPW-PLS) in order to take into account only significant and characteristic spectral features, in an attempt to improve the quality of the final regression models constructed. Using IPW-PLS regression, prediction of the four sensory responses modelled was performed with high accuracy, with root mean square errors of the residuals in cross-validation (RMSECV) ranging from 4.7 to 7.0%. Thus, the results provided by the high-quality calibration models proposed in the present study, comparable in terms of accuracy to the evaluations provided by a trained sensory panel, are promising and prove the feasibility of using a similar methodology in on-line or routine applications to predict the sensory quality of unknown espresso coffee samples via their respective NIR roasted coffee spectra.