氧化铝对Pt-SO2-4/ZrO2-Al2O3固体酸催化剂结构与酸性的影响

 通过混捏法制备了Pt-SO2-4/ZrO2-Al2O3固体酸催化剂,考察了该催化剂在正构烷烃低温异构化反应中的催化稳定性. 采用X射线衍射、差热分析、X射线光电子能谱、核磁共振、N2吸附-脱附和微量热等表征技术,对氧化铝的作用机理进行了研究. 结果表明,氧化铝起到结构助催化剂作用,对四方相氧化锆具有稳定作用,并延迟了氧化锆的晶化,抑制了氧化锆的烧结,从而增大了催化剂的比表面积和孔容. XPS结果表明, Zr 3d峰向低结合能方向移动, Al 2p峰向高结合能方向移动,说明Al3+的电子向Zr4+偏移. 微量热结果表明氧化铝的引入提高了催化剂的酸量和酸强度. 27Al固体核磁共振结果表明, Pt-SO2-4/ZrO2-Al2O3中的六配位铝的结构发生了变化. 氧化铝的引入还可能有助于氧化锆晶格缺陷的形成,焙烧过程中Al3+迁移进入氧化锆晶格并同晶取代Zr4+形成氧缺陷位,这些氧缺陷位在 S=O 键诱导下显示强酸性.     

掺杂助剂Ce和Zr的Ni/Al2O3催化剂的X光电子能谱分析

以Na2CO3为沉淀剂,在pH 9.0的沉淀条件下,采用并流沉淀法制备了Ni/Al2O3、Ni/CeO2-Al2O3、Ni/ZrO2-Al2O3和Ni/ZrO2-CeO2-Al2O34种催化剂,催化剂中Ni负载量(质量分数)为10%。采用XPS表征手段及常压固定床反应器对催化剂进行活性评价,考察了助剂Ce和Zr及二者的协同作用对Ni基催化剂表面物种结合能的影响以及对甲烷自热重整制氢反应性能的影响。结果表明,助剂Ce和Zr的添加及二者的协同作用对Ni基催化剂表面各物种的结合能均有一定的影响,结合评价结果可知,Ce和Zr二者的协同作用对Ni基催化剂的催化性能提高最大。     

硅晶片上超薄氧化硅层厚度纳米尺寸效应的XPS研究

用X射线光电子能谱(XPS)测定了一系列厚度经过国际比对准确已知的硅晶片上的超薄(1.45nmd7.2nm)氧化硅膜的Si2p电子能谱和价带谱.结果表明:SiO2膜厚d2nm时,Si2p结合能最低,其原因可归结于此时光电离空穴既有来自SiO2中的原子极化对空穴的原子外弛豫,也有来自衬底Si的电荷移动对空穴的屏蔽(有效屏蔽距离大约是(2.5±0.6)nm);当d3nm时Si2p结合能增大,此时只有来自SiO2的原子外弛豫,d较小者的Si2p结合能较高.SiO2的价带电子结构也与其厚度纳米尺寸效应有关:当d2nm时价带中SiO2的O2p非成键电子峰的相对强度较强,O2p—Si3p和O2p—Si3s成键电子峰较弱.     

Sol-gel法制备S_2O_8~(2-)/ZrO_2-SiO_2及其微波辐射下催化合成乙酸正丁酯的研究

以Zr O(NO3)2和正硅酸乙酯(TEOS)为原料,采用溶胶-凝胶法制备固体超强酸S2O82-/Zr O2-Si O2催化剂,以微波辐射下冰醋酸和正丁醇合成乙酸正丁酯为探针反应,探究了催化剂制备条件对催化活性的影响及反应条件对酯化反应的影响。运用Hammett指示剂法,BET法,XRD,TEM和FT-IR对催化剂进行了表征。结果表明,催化剂的最佳制备条件为nZr∶nSi=1∶10,焙烧时间3.0h,焙烧温度550℃,(NH4)2S2O8浸渍液浓度0.6 mol·L-1。微波辐射下酯化反应最优条件为:醇酸摩尔比2.2∶1,催化剂0.8g,反应时间35min,功率600W,此时产率为93.5%。该法制得的催化剂酸强度H0≤-13.16为超强酸,催化剂比表面较大,Si O2为无定形态,Zr O2为四方晶相,Zr O2在Si O2上分布相对均匀,且Si O2分布较为松散,基本呈多孔网状结构。     

氧化铝对Pt-SO4^2-／ZrO2-Al2O3固体酸催化剂结构与酸性的影响

通过混捏法制备了Pt-SO4^2-／ZrO2-Al2O3固体酸催化剂，考察了该催化剂在正构烷烃低温异构化反应中的催化稳定性．采用X射线衍射、差热分析、X射线光电子能谱、核磁共振、N2吸附-脱附和微量热等表征技术，对氧化铝的作用机理进行了研究．结果表明，氧化铝起到结构助催化剂作用，对四方相氧化锆具有稳定作用，并延迟了氧化锆的晶化，抑制了氧化锆的烧结，从而增大了催化剂的比表面积和孔容．XPS结果表明，Zr3d峰向低结合能方向移动，Al2p峰向高结合能方向移动，说明Al^3＋的电子向Zr^4＋偏移．微量热结果表明氧化铝的引入提高了催化剂的酸量和酸强度．^27Al固体核磁共振结果表明，Pt-SO4^2-／ZrO2-Al2O3中的六配位铝的结构发生了变化．氧化铝的引入还可能有助于氧化锆晶格缺陷的形成，焙烧过程中Al^3＋迁移进入氧化锆晶格并同晶取代Zr^4＋形成氧缺陷位，这些氧缺陷位在S=O键诱导下显示强酸性．     

超声吸附制备均匀分散在SBA-15的S2O82--Fe2O3纳米粒子:增强S2O82--Fe2O3本体催化活性

酸催化剂在化学反应和化工生产中具有重要的作用.传统无机酸,如H2SO4,H3PO4和对甲苯磺酸等具有较高的催化活性,但是存在污染大、设备腐蚀严重以及催化剂不能重复使用等问题.固体酸具有酸性强、易分离、环境友好以及稳定性和重复使用性好等特点因而近年来越来越引起人们的关注.其中,SO42--MxOy固体超强酸(如SO42--ZrO2,SO42--TiO2和SO42--SnO2等)因具有很好的催化性能而备受关注.相比SO42--MxOy,S2O82--MxOy具有更强的酸性和稳定性而成为研究的重点.如何克服固体超强酸本体的低比表面积和孔容,增加其比表面积和催化活性是固体超强酸研究的热点.超声吸附法可保证所制介孔固体酸活性组分均匀分散,以及大的比表面积和更多的酸性位点.因此采用超声吸附法制备了一种新型介孔固体酸S2O82--Fe2O3/SBA-15.相比S2O82--Fe2O3本体、B酸和文献报道催化剂,负载30%Fe2O3的S2O82--Fe2O3/SBA-15在环氧苯乙烷甲醇醇解的探针反应中显示出很高的催化活性,反应收率为100%.S2O82--Fe2O3纳米粒子的纳米效应和SBA-15介孔结构的协同作用使S2O82--Fe2O3/SBA-15具有高催化活性.相比S2O82--Fe2O3本体,采用超声分散技术制备的S2O82--Fe2O3/SBA-15固体超强酸具有典型的介孔结构、大的比表面和孔容,并且表面富含酸性位点.并且吡啶红外分析S2O82--Fe2O3/SBA-15表面富含L酸和B酸.环氧苯乙烷甲醇醇解探针反应表明,Fe2O3负载量为30%时,S2O82--Fe2O3/SBA-15的催化活性最高,优于S2O82--Fe2O3本体和已报道的布朗酸和路易斯酸等催化剂,将醇底物拓展(ROHs,R = C2H5-C4H9),S2O82--Fe2O3/SBA-15的催化活性也优于S2O82--Fe2O3本体.同时,S2O82--Fe2O3/SBA-15具有很好的重复使用性能,连续使用七次,反应收率在84.1%以上.总之,具有高催化活性、好的稳定性和经济性的S2O82--Fe2O3/SBA-15具有广阔的应用前景.     

磁性超细固体酸催化剂SO2-4-ZrO2/Fe3O4的组装及表征

将磁性Fe3O4纳米材料和SO2-4-ZrO2固体酸进行组装,制得一系列具有磁性和超细粒子结构的固体酸催化剂SO2-4-ZrO2/Fe3O4. 采用XRD,TG-DTA和XPS等分析测试手段对催化剂的结构和性能进行了表征. 并分析和测试了催化剂的磁学性能、比表面积、粒度分布和元素的组成等物理化学性质. 该催化剂具有较小的粒度、较高的磁性及酯化催化活性,对乙酸丁酯合成反应的催化活性可达66%; 利用Fe3O4的磁性可对催化剂进行分离和回收. 经高温处理后,固体超强酸的形成对催化剂磁性、比表面积、表相原子的电子结合能以及各组分形态均有显著影响.     

Zr-Ni/Al2O3催化剂上苯由H2O2氧化直接氨基化制苯胺

用浸渍法制备了Ni／Al2O3和Zr-Ni／Al2O3催化剂，用于以过氧化氢为氧化剂的苯直接氧化胺化制苯胺反应，并对催化剂进行了程序升温还原、室温氧吸附和氢吸附及XRD表征，结果表明，我们所制的Ni基催化剂对苯胺的生成都有活性，加入Zr后，催化剂中Ni物种更分散，低温可还原物种增加，室温吸氧和吸氢能力都增强，反应活性和对目标产物的选择性增大，Zr一方面使Ni物种进一步分散，增大催化剂的吸氢量和表面可还原Ni物种，有利于C-H键的活化；同时Zr与Ni的相互作用，促进了低温可还原物种的生成，使催化剂室温吸氧量增大，有利于苯的氧化，这种Zr和Ni的协同作用提高了催化剂的活性和选择性，催化剂的制备方法影响Zr与Ni的协同作用，使含Zr的两个催化剂的活性和选择性显示出差异。     

CO_2在Cu-Ni/ZrO_2-SiO_2催化剂上的吸附与反应

采用表面反应改性法 ,制备了 Zr O2 - Si O2 (Zr Si O)表面复合物 ;用等体积浸渍法制备了 Zr Si O担载的 Cu-Ni双金属催化剂 .用 IR和 TPD技术 ,研究了 CO2 在其表面上的化学吸附与反应性能 .实验结果表明 ,在 Cu- Ni/Zr Si O催化剂上 CO2 可形成线式吸附态、剪式吸附态和卧式吸附态 ;催化剂表面金属位 M上的剪式吸附态 CO2可与邻近的 lewis酸位 Zrn+作用 ,形成 CO2 卧式吸附态 M- (CO) - O Zr4+ ;该卧式吸附态在一定温度(142℃ )下可解离为 M- CO和 Zr- O- .Zr- O- 具有良好的选择氧化性能     

磁性超细固体酸催化剂SO4^2——ZrO2／Fe3O4的组装及表征

将磁性Fe3O4纳米材料和SO4^2--ZrO2固体酸进行组装，制得一系列具有磁性和超细粒子结构的固体酸催化剂SO4^2--ZrO2/Fe3O4，采用XRD，TG－DTA和XPS等分析测试手段对催化剂的结构和性能进行了表征。并分析和测试了催化剂的磁学性能、比表面积、粒度分布和元素的组成等物理化学性质。该催化剂具有较小的粒度、较高的磁性及酯化催化活性，对乙酸丁酯合成反应的催化活性可达66％；利用Fe3O4的磁性可对催化剂进行分离和回收。经高温处理后，固体超强酸的形成对催化剂磁性、比表面积、表相原子的电子结合能以及各组分形态均有显著影响。     

Thermal Decomposition of CF3C(O)O2NO2, CClF2C(O)O2NO2, CCl2FC(O)O2NO2, and CCl3C(O)O2NO2

Haloacetyl, peroxynitrates are intermediates in the atmospheric degradation of a number of haloethanes. In this work, thermal decomposition rate constants of CF₃C(O)O₂NO₂, CClF₂C(O)O₂NO₂, CCl₂FC(O)O₂NO₂, and CCl₃C(O)O₂NO₂ have been determined in a temperature controlled 420 l reaction chamber. Peroxynitrates (RO₂NO₂) were prepared in situ by photolysis of RH/Cl₂/O₂/NO₂/N₂ mixtures (R = CF₃CO, CClF₂CO, CCl₂FCO, and CCl₃CO). Thermal decomposition was initiated by addition of NO, and relative RO₂NO₂ concentrations were measured as a function of time by long-path IR absorption using an FTIR spectrometer. First-order decomposition rate constants were determined at atmospheric pressure (M = N₂) as a function of temperature and, in the case of CF₃C(O)O₂NO₂ and CCl₃C(O)O₂NO₂, also as a function of total pressure. Extrapolation of the measured rate constants to the temperatures and pressures of the upper troposphere yields thermal lifetimes of several thousands of years for all of these peroxynitrates. Thus, the chloro(fluoro)acetyl peroxynitrates may play a role as temporary reservoirs of Cl, their lifetimes in the upper troposphere being limited by their (unknown) photolysis rates. Results on the thermal decomposition of CClF₂CH₂O₂NO₂ and CCl₂FCH₂O₂NO₂ are also reported, showing that the atmospheric lifetimes of these peroxynitrates are very short in the lower troposphere and increase to a maximum of several days close to the tropopause. The ratio of the rate constants for the reactions of CF₃C(O)O₂ radicals with NO₂ and NO was determined to be 0.64 ± 0.13 (2σ) at 315 K and a total pressure of 1000 mbar (M = N₂). © 1994 John Wiley & Sons, Inc.     

Fe2P2O7(H2O)2

The compound diiron diphosphate dihydrate, Fe₂P₂O₇(H₂O)₂, was synthesized hydro­thermally and crystallizes in the monoclinic space group P2₁/n. The compound has a somewhat open framework made up of edge‐sharing iron(II) octahedra that form chains connected by five bridging diphosphates. The remaining octahedral site of each iron is occupied by coordinated water. The H atoms of the water molecules all point into a common channel.     

Thermodynamics of Cr2O3, FeCr2O4, ZnCr2O4, and CoCr2O4

High-temperature heat capacity measurements were obtained for Cr₂O₃, FeCr₂O₄, ZnCr₂O₄, and CoCr₂O₄ using a differential scanning calorimeter. These data were combined with previously available, overlapping heat capacity data at temperatures up to 400 K and fitted to 5-parameter Maier–Kelley C_p(T) equations. Expressions for molar entropy were then derived by suitable integration of the Maier–Kelley equations in combination with recent S^∘(298) evaluations. Finally, a database of high-temperature equilibrium measurements on the formation of these oxides was constructed and critically evaluated. Gibbs free energies of Cr₂O₃, FeCr₂O₄, and CoCr₂O₄ were referenced by averaging the most reliable results at reference temperatures of (1100, 1400, and 1373) K, respectively, while Gibbs free energies for ZnCr₂O₄ were referenced to the results of Jacob [K.T. Jacob, Thermochim. Acta 15 (1976) 79–87] at T = 1100 K. Thermodynamic extrapolations from the high-temperature reference points to T = 298.15 K by application of the heat capacity correlations gave Δ_fG^∘(298) = (−1049.96, −1339.40, −1428.35, and −1326.75) kJ · mol⁻¹ for Cr₂O₃, FeCr₂O₄, ZnCr₂O₄, and CoCr₂O₄, respectively.     

Kristallstruktur von LiHC2O4-H2O

LiHC₂O₄ · H₂O crystallizes in space group P 1 with a₀ = 4.99, b₀ = 6.16, c₀ = 3.45 Å; α₀ = 96.3°, β₀ = 98.0°, γ₀ = 80.4° and Z = 1. The crystal structure has been determined by direct methods. Refinement by least squares methods resulted to R₁ = 8,3%. In the structure the oxalate group is not planar. The angle between the two O? C? O planes is 2.9°.     

K2[Mo2O4(C2O4)2(H2O)2]·3H2O

The crystal and molecular structure of dipotassium di‐μ‐oxo‐bis[aqua(oxalato‐O¹,O²)oxomolybdenum(III)] trihydrate, K₂­[Mo₂O₄(C₂O₄)₂(H₂O)₂]·3H₂O, has been determined from X‐ray diffraction data. In the dimeric anion, which has approximate twofold symmetry, each Mo atom is in a distorted octahedral coordination, being bonded to one terminal oxo‐O atom, two bridging O atoms, two O atoms from the oxalato ligand and one from the water mol­ecule. Bond lengths trans to the multiple‐bonded terminal oxo ligand are larger than those in the cis position, confirming the trans influence as a generally valid rule.     

Ga2O3-La2O3-Yb2O3-Er2O3(HO2O3)体系光谱性质的研究

根据稀土离子能级的特点,对Ga2O3-La2O3-Yb2O3-Er2O3(HO2O3)体系的光谱性质进行了探讨,发现它们有二类发光性质:Stokes发光和反Stokes发光,研究了发光强度和发射波长与掺杂离子的依赖关系,观察到由能量的共振转移引起的荧光浓度猝灭现象,并取得了最大发光强度时的掺杂离子浓度和一些规律性结果.     

Die sechsgliedrigen Ringsysteme PIIISi2N2O, [PVSi2N2O]⊕ und PVSi2N2O

Compounds I-X of the sixmembered ring system PSi₂N₂O with phosphorus in different oxidation and bond numbers, collected in Schema 1, have been prepared for the first time and confirmed in their structure by elemental analysis as well as by infrared and¹H- and³¹P-spectroscopy.

---

---

Mit Auszügen aus der DissertationK. P. Giesen, Techn. Univ. Braunschweig 1972.     

Studies on the System ZnO-V2O5-Fe2O3 Reactivity of ZnFe2O4 Towards ZnV2O6

Studies on the reactivity of ZnFe₂O₄ towards ZnV₂O₆ revealed that in the solid state the phases interact in a molar ratio of 1:3 to form a new compound, to which the molecular formula Zn₂FeV₃O₁₁ was assigned. The compound melts congruently at 825±5°C. This revised version was published online in July 2006 with corrections to the Cover Date.