高性能黑色纳米二氧化钛材料研究

二氧化钛是最重要的光电半导体材料之一, 纳米二氧化钛作为最重要的光催化剂所面临的巨大挑战是无法吸收可见光而导致太阳能利用效率低下. 拓展二氧化钛的光谱响应范围是提高其太阳能利用效率的关键. 最近发展的可以有效吸收可见光的黑色二氧化钛受到广泛关注, 我们针对黑色纳米二氧化钛材料展开了一系列工作, 发展出多种黑色二氧化钛材料的制备方法, 获得了太阳能高吸收、 高效光催化的材料. 本文综合了我们的部分研究工作, 概述了所制备黑色纳米二氧化钛的物化性质、 制备方法及其应用, 并提出了该材料的研究方向.     

高性能黑色纳米二氧化钛材料研究（英文）

二氧化钛是最重要的光电半导体材料之一,纳米二氧化钛作为最重要的光催化剂所面临的巨大挑战是无法吸收可见光而导致太阳能利用效率低下.拓展二氧化钛的光谱响应范围是提高其太阳能利用效率的关键.最近发展的可以有效吸收可见光的黑色二氧化钛受到广泛关注,我们针对黑色纳米二氧化钛材料展开了一系列工作,发展出多种黑色二氧化钛材料的制备方法,获得了太阳能高吸收、高效光催化的材料.本文综合了我们的部分研究工作,概述了所制备黑色纳米二氧化钛的物化性质、制备方法及其应用,并提出了该材料的研究方向.     

聚乙二醇对纳米二氧化钛性质和应用的影响

二氧化钛纳米晶光催化材料是近年来发展起来的新型环境友好材料,国内外研究者在利用二氧化钛纳米晶光催化降解苯酚、氯酚、甲醛等污染物方面做了大量的研究工作。研究表明TiO2的3种晶型,锐钛矿型、金红石型和板钛矿型中,有光催化作用的主要是锐钛型和金红石型,其晶型和晶粒大小     

共沉淀法制备氧化硅改性的纳米二氧化钛及其性质

采用共沉淀法合成了氧化硅改性的具有高比表面积的纳米二氧化钛.氧化硅的添加提高了二氧化钛纳米颗粒的热稳定性能,有效地抑制了纳米二氧化钛的颗粒增长、团聚和锐钛向金红石的晶型转换.光催化降解亚甲基蓝证明,样品具有较高的光催化活性,而且随着氧化硅添加量的增加,光催化活性提高.     

太阳光活性的铁酸铝-二氧化钛纳米复合光催化剂

以共沉淀法制备的铁酸铝和溶胶-凝胶法制备的二氧化钛粉体作为前驱体, 合成了铁酸铝-二氧化钛纳米复合材料, 通过曙红染料和甲基橙的光催化降解来评价该纳米复合材料的光催化活性, 并与单一二氧化钛的光催化性能进行了比较. 实验结果表明: 无论是紫外光还是太阳光的激发下, 铁酸铝-二氧化钛纳米复合材料的光催化活性均优于同样条件下所制备的单一二氧化钛纳米材料, 理想的铁酸铝掺杂浓度分别是1.0%(紫外光)和9.0%(太阳光). 由于在二氧化钛基体中掺入铁酸铝纳米粒子, 既可以促进光生载流子的电荷分离, 又可以使二氧化钛的光响应波长向可见光区域拓展, 提高了太阳能利用率, 从而使其在太阳光下具有更优越的光催化活性.     

紫外光照射下丙炔光催化水解反应的研究 Ⅰ．纳米二氧化钛光催化剂的性能

 采用5种不同的纳米二氧化钛为光催化剂,考察了它们在丙炔水解反应中的光催化活性,并用X射线衍射和漫反射紫外－可见吸收光谱技术进行了表征．研究了催化剂表面物理化学性质与在丙炔光催化水解反应中的构效关系．实验结果表明,纳米二氧化钛光催化剂能够引发丙炔的光催化水解反应,生成乙烷和乙烯等产物;锐钛矿相纳米二氧化钛具有较高的光催化活性,在晶型相同的情况下,影响光催化活性的主要因素是催化剂的粒径和比表面积．     

不同形态二氧化钛-石墨烯复合材料的表征及光催化性能研究

研究了二氧化钛的形态对二氧化钛-石墨烯(GN)复合材料光催化性能的影响。采用水热法制备了3种不用形态的二氧化钛,即钛纳米管(TNT)、钛纳米片(TNS)与二氧化钛纳米粒子(TNP)。采用X射线衍射、傅里叶变换红外光谱、透射电子显微镜、X射线光电子能谱、紫外-可见分光光度法等对所得的复合材料进行表征。通过在紫外灯照射下降解活性黑染料与诺氟沙星药物的混合废水测试了复合材料的光催化性能。结果表明:不同形态二氧化钛-石墨烯复合材料的光催化性能均优于纯商业用二氧化钛,所制备材料在形态上的差异对复合材料催化性能也有较大的影响。     

铁掺杂纳米TiO_2可见光气相降解三氯乙烯的研究

采用溶-胶凝胶及水热法制备了铁掺杂的纳米TiO_2光催化材料.采用X射线衍射、X光电子能谱和紫外-可见漫反射等方法对铁掺杂的纳米TiO_2光催化材料进行了表征.以三氯乙烯作为目标污染物,研究了铁掺杂的二氧化钛的光催化性能.结果表明,Fe-TiO_2对光的吸收拓展到可见光范围内,铁掺杂后TiO_2催化剂有更多的表面羟基,这些表面羟基的存在有利于有机物在催化剂表面的吸附,同时还能捕获光生空穴形成·OH氧化有机污染物.适量Fe掺杂有利于提高TiO_2光催化性能.     

介孔二氧化钛的制备及铜（Ⅱ）对其光催化氧化活性的影响

采用十六烷基三甲基溴化铵为模板剂,钛酸正四丁酯为原料,水热法合成出孔径为4.4 nm介孔二氧化钛.通过X射线粉末衍射仪、透射电子显微镜和氮气吸附技术对样品进行了表征.以甲基橙为模型化合物,考察了铜(Ⅱ)对介孔二氧化钛光催化活性的影响,研究表明:介孔二氧化钛的光催化活性与P25纳米二氧化钛相当,铜(Ⅱ)的加入提高了介孔二氧化钛的光催化活性,甲基橙的光催化降解速率与光强度成正比.     

铁酸锌掺杂对二氧化钛结构相变及光催化性能的影响

分别采用共沉淀法和溶胶-凝胶法制备铁酸锌和二氧化钛纳米粉体,较系统地研究了铁酸锌纳米掺杂对二氧化钛“锐钛矿→金红石”的结构相变及光催化性能的影响.结果表明,适量铁酸锌的掺杂可促进二氧化钛的结构相变,显著提高其光催化活性,在最佳掺杂浓度时,其光催化降解苯酚的效率可以提高2～3倍.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.