Pd/MCM-41催化碘苯Ullmann偶合制备联苯

联苯是一种重要的有机合成中间体,广泛应用于超分子、高性能染料和药物活性剂以及有机导体和半导体的生产中。目前,联苯的合成方法主要有Ullmann偶合反应、Stille反应、Heek反应、Suzuk反应和Sonogashira反应等。其中,Ullmann偶合反应由于成本低且简单易操作而倍受青睐。最早采用Cu-基催化剂,但需要在高温下进行,反应条件相当苛刻。采用Pd-基均相催化剂可大大降低反应温度,     

Mesoporous Silica MCM‐41 Supported N‐Heterocyclic Carbene‐Pd Complex for Heck and Sonogashira Coupling Reactions

Heterocyclic carbene‐Pd complex was anchored onto the mesoporous silica MCM‐41 which exhibits high catalytic activity in Heck reaction under phosphine free reaction conditions for the reaction of iodo/bromoarenes with olefinic compounds such as butyl acrylate, isopropyl acrylate and styrene. This catalytic system also showed high activity for Sonogashira coupling reaction of various aryl halides under copper, phosphine and solvent‐free reaction conditions. The air and thermally stable catalyst were reused several times without significant loss of its activity. High efficiency of the catalyst along with its recycling ability and the rather low Pd‐loading demonstrated in both Heck and Sonogashira coupling reactions are the merits of the presented catalyst system.     

Pd/NH2C3H6-MCM-41催化水介质中的碘苯Ullmann反应

 采用室温共缩聚法合成了胺基改性MCM-41杂化材料(NH2C3H6-MCM-41), 并以此材料为载体制备了负载型Pd催化剂 (Pd/NH2C3H6-MCM-41). 采用X射线衍射、核磁共振、红外光谱、透射电镜、X射线光电子能谱和N2吸附等方法对催化剂进行了表征. 结果表明,催化剂仍保持有MCM-41的孔结构,但其有序度随着 NH2C3H6-基团和Pd含量的增加而降低. 催化剂在以水为溶剂的碘苯偶联反应(Ullmann反应)中显示出优良的催化性能,联苯收率可达63%, 有望为清洁有机合成提供高效非均相催化剂. 胺基修饰的促进作用可归因于催化剂Pd分散度的提高和表面化学性质的改变.     

Ordered Mesoporous Organosilica with Ionic‐Liquid Framework: An Efficient and Reusable Support for the Palladium‐Catalyzed Suzuki–Miyaura Coupling Reaction in Water

The preparation of a novel palladium‐supported periodic mesoporous organosilica based on alkylimidazolium ionic liquid (Pd@PMO‐IL) in which imidazoilium ionic liquid is uniformly distributed in the silica mesoporous framework is described. Both Pd@PMO‐IL and the parent PMO‐IL were characterized by N₂‐adsorption–desorption, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), TEM, and solid‐state NMR spectroscopy. We have demonstrated that Pd@PMO‐IL is an efficient and reusable catalyst for the Suzuki–Miyaura coupling reaction of various types of iodo‐, bromo‐, and even deactivated aryl chlorides in water. It was also found that although the PMO‐IL nanostructure acts as reservoir for soluble Pd species, it can also operate as a nanoscaffold to recapture the Pd nanoparticles into the mesochannels thus preventing extensive agglomeration of Pd. This observation might be attributed to the isolated ionic liquid units that effectively control the reaction mechanism by preventing Pd agglomeration and releasing and recapturing Pd nanoparticles during the reaction process. The catalyst can be recovered and reused for at least four reaction cycles without significant loss of activity.     

CO2‐promoted Water‐medium Ullmann Reaction over a Pd/Phenyl‐SBA‐15 Mesoporous Catalyst

Water‐medium Ullmann reaction was carried out in CO₂ atmosphere over the mesoporous Pd/Ph‐SBA‐15 catalyst exhibiting high activity and selectivity owing to the uniform dispersion of Pd particles and hydrophobilic mesoporous channels which facilitate the diffusion and adsorption of organic molecules, especially in an aqueous medium. The CO₂ also shows promoting effect on activity and selectivity, which could be understood by considering the role of H⁺ in the mechanism of Ullmann reaction. The optimum Ph‐Ph yield (84.0%) was obtained at p=0.8 MPa and V=6.0 mL and could remain almost unchanged even after the catalyst has been used repetitively for 5 times.     

Periodic mesoporous organosilica grafted palladium organometallic complex: efficient heterogeneous catalyst for water‐medium organic reactions

Water‐medium organic reactions were studied over periodic mesoporous silica (PMO) containing Pd(II) organometallic complex. This heterogeneous catalyst was achieved by Pd(II) compound coordinated with the PPh₂‐ligand onto the pore surface of phenylene‐bridged PMO support. This catalyst displayed ordered mesoporous channels, which ensured the high dispersion of Pd(II) active sites and the convenient diffusion of reactant molecules into the pore channels. Meanwhile, the phenyl group in the pore wall of PMO could enhance the surface hydrophobicity which promoted the adsorption of organic reactant molecules on the catalyst in aqueous environment. As a result, this elaborated catalyst exhibited comparable activity and selectivity with the corresponding PdCl₂(PPh₃)₂ homogeneous catalyst in the water‐medium organic reactions, and could be used repeatedly, showing a good potential in industrial applications. Copyright © 2010 John Wiley & Sons, Ltd.     

巯基功能化介孔材料高效锚定钯负载型催化剂的制备及其苯酚加氢催化性能

以含巯基官能团有机硅烷修饰的介孔材料MCM-41和SBA-15为载体, 采用浸渍-氢气还原法制备了高分散和高活性的负载型Pd催化剂. X射线衍射、N₂吸附-脱附和透射电子显微镜表征结果显示, 所制Pd催化剂Pd-SH-MCM-41和Pd-SH-SBA-15具有很好的长程有序结构、分布均匀的孔径、高比表面积及高度分散的Pd颗粒. 苯酚加氢反应结果表明, 以Pd-SH-MCM-41和Pd-SH-SBA-15为催化剂时, 在80℃, 1.0MPa反应1h, 苯酚转化率达99%以上, 环己酮选择性为98%. 它们的催化活性为商业Pd/C催化剂的5倍, Pd/MCM-41和Pd/SBA-15催化剂的3倍. 这可归因于介孔材料表面修饰的巯基官能团对Pd的锚定作用, 避免了Pd颗粒的团聚, 使其高度分散在介孔材料上.     

Heck and oxidative boron Heck reactions employing Pd(II) supported amphiphilized polyethyleneimine‐functionalized MCM‐41 (MCM‐41@aPEI‐Pd) as an efficient and recyclable nanocatalyst

A novel nanocatalyst was developed based on covalent surface functionalization of MCM‐41 with polyethyleneimine (PEI) using [3‐(2,3‐Epoxypropoxy)propyl] trimethoxysilane (EPO) as a cross‐linker. Amine functional groups on the surface of MCM‐41 were then conjugated with iodododecane to render an amphiphilic property to the catalyst. Palladium (II) was finally immobilized onto the MCM‐41@PEI‐dodecane and the resulted MCM‐41@aPEI‐Pd nanocatalyst was characterized by FT‐IR, TEM, ICP‐AES and XPS. Our designed nanocatalyst with a distinguished core‐shell structure and Pd²⁺ ions as catalytic centers was explored as an efficient and recyclable catalyst for Heck and oxidative boron Heck coupling reactions. In Heck coupling reaction, the catalytic activity of MCM‐41@aPEI‐Pd in the presence of triethylamine as base led to very high yields and selectivity. Meanwhile, the MCM‐41@aPEI‐Pd as the first semi‐heterogeneous palladium catalyst was examined in the C‐4 regioselective arylation of coumarin via the direct C‐H activation and the moderate to excellent yields were obtained toward different functional groups. Leaching test indicated the high stability of palladium on the surface of MCM‐41@aPEI‐Pd as it could be recycled for several runs without significant loss of its catalytic activity.     

Mesoporous silica supported ytterbium as catalyst for synthesis of 1,2‐disubstituted benzimidazoles and 2‐substituted benzimidazoles

The benzimidazole ring is an important pharmacophore in contemporary drug discovery. Thus, effort to identifying new compounds containing benzimidazole scaffolds have gained much attention in recent years. In the present study, MCM‐41 type mesoporous silica with large pore (l‐MSN) supported ytterbium was successfully prepared by wet impregnation method. Among rare earth metal salts, ytterbium triflate has already been widely investigated as a catalyst in organic synthesis but less toxic ytterbium oxide has yet to be explored. Relatively high abundance and low cost of ytterbium with respect to many catalytically active metals (e.g. Pd, Au, Ru, Ir, Pt) offer an opportunity to develop sustainable catalysts for organic conversions. The catalyst has been characterized by various techniques including nitrogen adsorption, FT‐IR, TEM, SEM, EDX technique and elemental mapping. The obtained materials exhibit high surface area and a narrow distribution of mesoporosity. The catalytic performance of the Yb@l–MSNs was tested by synthesis of 1,2‐disubstituted benzimidazoles and 2‐substituted benzimidazoles through the coupling of aldehydes with o‐phenylenediamine. The catalyst resulted in excellent yields in short reaction times and the reaction showed tolerance toward both electron‐donating and electron‐withdrawing functional groups at room temperature. A particularly interesting finding was the solvent selectivity of this reaction; namely, 1,2‐disubstituted benzimidazoles generated as major product in water‐ethanol, while the 2‐substituted benzimidazoles was generated exclusively in non‐polar solvents like toluene.     

Immobilization of palladium in mesoporous silica matrix: preparation, characterization, and its catalytic efficacy in carbon-carbon coupling reactions

Palladium(0) has been immobilized into the silica-based mesoporous material to develop catalyst Pd(0)-MCM-41, which is found to be highly active in carbon-carbon coupling reactions. [Pd(NH3)4]2+ ions have been incorporated into the mesoporous material during synthesis of MCM-41 and subsequently upon treatments with hydrazine hydrate Pd2+ ions present in mesoporous silica matrix were reduced to Pd(0) almost instantaneously. The catalyst has been characterized by small-angle X-ray diffraction, N2 sorption, and transmission electron microscopy (TEM). TEM and surface area measurements clearly demonstrate that the immobilization of Pd(0) into the mesoporous silica has a significant effect on pore structure of the catalyst. Nevertheless, after immobilization of palladium the meso-porosity of the material is retained, as evidenced in the nitrogen sorption measurement. The TEM micrograph shows that both MCM-41 and Pd(0)-MCM-41 have similar types of external surface morphology; however, Pd(0)-MCM-41 was less ordered. Pd(0)-MCM-41 showed high catalytic activity toward carbon-carbon bond formation reactions like Heck and Sonogashira coupling, as evidenced in high turn-over numbers. In contrast to many other Pd-based catalysts reported so far, Pd(0)-MCM-41 acts as a truly heterogeneous catalyst in C-C coupling reactions. Notably, the new heterogeneous catalyst is found to be efficient in the activation of arylchloride to give impressive conversion in cross coupling (15-45% for Heck and 30% for Sonogashira) reactions under mild conditions.     

铑-三苯基膦配合物功能化的聚合物@介孔氧化硅复合材料在1-辛烯氢甲酰化反应中的应用(英文)

通过在介孔氧化硅材料中原位聚合的方法制备了三苯基膦功能化的有机聚合物@介孔氧化硅复合材料PPh3polymer@FDU-12.采用X射线衍射、氮气吸附脱附、透射电镜和热重等手段对其结构和组成进行了表征.该复合材料与金属前驱体Rh(acac)(CO)2配位后得到的固体催化剂,在长链烯烃1-辛烯的氢甲酰化反应中,醛选择性可达92%–96%,并表现出高于聚合物的活性(99%转化率).这主要归因于介孔氧化硅材料的高比表面积和有序的孔结构更有利于反应物和催化活性中心的接触.研究发现,调变复合材料中聚合物的含量或使用不同孔道结构的氧化硅载体(SBA-15,MCM-41和FDU-12)都会影响固体催化剂的反应活性和选择性.该方法得到的多相催化剂具有较好的循环使用性能,在循环使用15次后仍能保持较好的反应活性,但醛选择性有所降低.     

Ruthenium Carbenes Supported on Mesoporous Silicas as Highly Active and Selective Hybrid Catalysts for Olefin Metathesis Reactions under Continuous Flow

In the search for a highly active and selective heterogenized metathesis catalyst, we systematically varied the pore geometry and size of various silica‐based mesoporous (i.e., MCM‐41, MCM‐48, and SBA‐15) and microporous (ZSM‐5 and MWW) versus macroporous materials (D11‐10 and Aerosil 200), besides other process parameters (temperature, dilution, and mean residence time). The activity and, especially, selectivity of such “linker‐free” supports for ruthenium metathesis catalysts were evaluated in the cyclodimerization of cis‐cyclooctene to form 1,9‐cyclohexadecadiene, a valuable intermediate in the flavor and fragrance industry. The optimized material showed not only exceptionally high selectivity to the valuable product, but also turned out to be a truly heterogeneous catalyst with superior activity relative to the unsupported homogeneous complex.     

A Direct and Rapid Route to Synthesize Pd/Si‐MCM‐41 at Room Temperature

The pure silica mesoporous molecular sieve MCM‐41 was synthesized under hydrothermal conditions. Pd/Si‐MCM‐41 was prepared by the incipient wetness impregnation of pure silica MCM‐41 with mixed solution of PdCl₂, ethanol and CH₂Cl₂. The samples were characterized by x‐ray diffraction (XRD), transmission electron microscopy (TEM), and nitrogen adsorption–desorption isotherms at 77 K. The XRD and TEM results reveal that Pd is actually anchored inside the pores of Si‐MCM‐41 and the Si‐MCM‐41 structure is clearly maintained after impregnation.     

Synthesis of new zirconium complex supported on MCM‐41 and its application as an efficient catalyst for synthesis of sulfides and the oxidation of sulfur containing compounds

In the present work, we report synthesis of new zirconium complex supported on mesoporous silica by anchoring of adenine on the wall of functionalized MCM‐41, then reacted with ZrOCl₂. The resultant MCM‐41‐Adenine‐Zr was characterized by FT‐IR, XRD, TEM, SEM, TGA, EDX, ICP and BET techniques. It was exhibited that the MCM‐41‐Adenine‐Zr can be used as an efficient and thermally stable nanocatalyst for the oxidation of sulfides, oxidative coupling of thiols and synthesis of sulfides. Moreover, this heterogeneous catalyst can be easily recovered from the reaction mixture by simple filtration and reused for several consecutive cycles without noticeable change in its catalytic activity.     

Synthesis and characterization of indium and thallium immobilized on isonicotinamide‐functionalized mesoporous MCM‐41: Two novel and highly active heterogeneous catalysts for selective oxidation of sulfides and thiols to their corresponding sulfoxides and disulfides

Two highly ordered isonicotinamide (INA)‐functionalized mesoporous MCM‐41 materials supporting indium and thallium (MCM‐41‐INA‐In and MCM‐41‐INA‐Tl) have been developed using a covalent grafting method. A surface functionalization method has been applied to prepare Cl‐modified mesoporous MCM‐41 material. Condensation of this Cl‐functionalized MCM‐41 with INA leads to the formation of MCM‐41‐INA. The reaction of MCM‐41‐INA with In(NO₃)₃ or Tl(NO₃)₃ leads to the formation of MCM‐41‐INA‐In and MCM‐41‐INA‐Tl catalysts. The resulting materials were characterized using various techniques. These MCM‐41‐INA‐In and MCM‐41‐INA‐Tl catalysts show excellent catalytic performance in the selective oxidation of sulfides and thiols to their corresponding sulfoxides and disulfides. Finally, it is found that the anchored indium and thallium do not leach out from the surface of the mesoporous catalysts during reaction and the catalysts can be reused for seven repeat reaction runs without considerable loss of catalytic performance.     

无配体Pd/LDH-F催化剂在Heck和Suzuki反应中的应用

 以氟离子插层的水滑石LDH-F为载体,用逐滴浸渍法制备了新型Pd/LDH-F催化剂,并用其催化溴代芳烃的Heck和Suzuki偶联反应. 用X射线衍射表征了催化剂的晶相,以等离子体发射光谱测定了溶剂中钯的流失量. 结果表明,对于Heck反应,在无配体存在和低钯用量(Pd/溴代芳烃摩尔比为0.001)的情况下, Pd/LDH-F的催化性能优于其它载体负载的Pd催化剂,显示出很高的催化活性和选择性. 在140 ℃和12 h的条件下, Pd/LDH-F催化溴苯与苯乙烯Heck反应产物的收率可达86％, 反应后催化剂经过分离,可循环使用四次其催化活性基本不变. 在DMF/水摩尔比为0.5的混合溶剂中,在室温和3 h 的条件下, Pd/LDH-F (Pd/溴代芳烃摩尔比为0.005)催化溴苯与苯基硼酸盐的Suzuki反应中,目标产物收率为99%.     

A phosphine‐free heterogeneous Suzuki–Miyaura reaction of aryl bromides catalyzed by MCM‐41‐supported tridentate nitrogen palladium complex under air

MCM‐41‐supported tridentate nitrogen palladium(II) complex [MCM‐41‐3 N‐Pd(II)] was conveniently synthesized from commercially available and cheap 3‐(2‐aminoethylamino)propyltrimethoxysilane via immobilization on MCM‐41, followed by reacting with pyridine‐2‐carboxaldehyde and PdCl₂. It was found that this palladium complex is an excellent catalyst for the Suzuki–Miyaura coupling reaction of aryl bromides on two points: (i) the use of 5 × 10⁻⁴ mol equiv. of MCM‐41‐3 N‐Pd(II) under air afforded the coupling products efficiently after easy workup; (2) the catalyst can be reused many times without loss of catalytic activity. Copyright © 2011 John Wiley & Sons, Ltd.     

Pd单原子/团簇高效催化铃木偶联反应

铃木偶联反应是合成聚烯烃、苯乙烯和联苯衍生物等功能性有机化合物的有力工具,广泛应用于精细化工、制药和生化工业领域.钯(Pd)基催化剂是目前性能最好的铃木偶联反应催化剂,但钯的低丰度和高成本限制了其大规模应用.因此,提高Pd原子的利用效率,降低Pd用量至关重要.减小金属纳米粒子的尺寸,使其成为小团簇甚至孤立的金属原子是实...     

Application of MCM‐41‐SO3H as an Advanced Nanocatalyst for the Solvent Free Synthesis of Pyrano[3,2‐c]pyridine Derivatives

MCM‐41‐SO₃H, an ordered mesoporous silica material in which MCM‐41 with covalently anchored sulfonic acid groups was used as an acidic catalyst for the rapid and ‘green’ synthesis of pyrano[3,2‐c]pyridine derivatives under solvent‐free conditions. Reusability of the catalyst, high yields, short reaction times, simplicity and easy workup are advantages of this novel synthetic procedure compared to the conventional methods reported in the literature.     

Immobilization of cerium (IV) and erbium (III) in mesoporous MCM‐41: Two novel and highly active heterogeneous catalysts for the synthesis of 5‐substituted tetrazoles,and chemo‐ and homoselective oxidation of sulfides

Two well‐ordered 2D ‐ hexagonal cerium (IV) and erbium (III) embedded functionalized mesoporous MCM ‐ 41(MCM‐41@Serine/Ce and MCM ‐ 41@Serine/Er) have been developed via functionalization of mesoporous MCM ‐ 41. The surface modification method has been used in the preparation of serine‐grafted MCM ‐ 41 and led to the development of MCM‐41@Serine. The reaction of MCM‐41@Serine with Ce (NH₄)₂(NO₃)₆·2H₂O or ErCl₃·6H₂O in ethanol under reflux led to the organization of MCM‐41@Serine/Ce and MCM‐41@Serine/Er catalysts. The structures of these catalysts were determined using scanning electron microscopy, mapping, energy‐dispersive X‐ray spectroscopy, Fourier transform‐infrared, thermogravimetric analysis, X‐ray diffraction, inductively coupled plasma, and Brunauer–Emmett–Teller analysis. These MCM‐41@Serine/Ce and MCM‐41@Serine/Er catalysts show outstanding catalytic performance in sulfides oxidation and synthesis of 5‐substituted tetrazoles. These catalysts can be recycled for seven repeated reaction runs without showing a considerable decrease in catalytic performance.