Room temperature ionic liquid-mediated molecularly imprinted polymer monolith for the selective recognition of quinolones in pork samples

A novel molecularly imprinted polymer monolith was prepared by the room temperature ionic liquid-mediated in situ molecular imprinting technique, using norfloxacin (NOR) as the template, methacrylic acid as the functional monomer, ethylene glycol dimethacrylate as the cross-linker. The optimal synthesis conditions and recognition properties of NOR-imprinted monolithic column were investigated. The results indicated that the imprinted monoliths exhibited good ability of selective recognition against the template and its structural analog. Using the fabricated material as solid-phase extraction sorbent, a sample pre-treatment procedure of molecularly imprinted solid-phase extraction coupling with HPLC was developed for determination of trace quinolone residues in animal tissues samples. The recoveries ranging from 78.16 to 93.50% for eight quinolones antibiotics such as marbofloxacin, NOR, ciprofloxacin, danofloxacin, difloxacin, oxolinic acid, flumequine and enrofloxacin were obtained.     

Semi-covalent imprinted polymer using propazine methacrylate as template molecule for the clean-up of triazines in soil and vegetable samples

A semi-covalent imprinted polymer was prepared by precipitation polymerisation using propazine methacrylate as template molecule, ethylene glycol dimethacrylate as cross-linker and toluene as porogen. After removal of propazine by basic hydrolysis of the covalent bond, the optimum loading, washing and elution conditions for the solid-phase extraction of the selected triazines were established. The binding sites present in the polymeric matrix were characterised by fitting the experimental results of several rebinding studies to the Langmuir-Freundlich isotherm. Subsequently, an analytical methodology based on molecularly imprinted solid-phase extraction (MISPE) was developed for the determination of several triazinic herbicides in soil and vegetable samples. Following this procedure, a good degree of clean-up of the sample extracts was easily achieved, allowing the HPLC-UV determination of selected triazines in complex samples at low concentration levels.     

分子印迹固相萃取—高效液相色谱法同时测定鸡血浆中环丙氨嗪和三聚氰胺残留

建立了基于分子印迹固相萃取-高效液相色谱同时测定鸡血浆中环丙氨嗪和三聚氰胺残留方法.以环丙氨嗪为模板分子,甲基丙烯酸为功能单体,合成了对环丙氨嗪和三聚氰胺具有高选择性的分子印迹聚合物.作为固相萃取填料,评价和优化了其分离、富集环丙氨嗪和三聚氰胺的固相萃取条件.血浆用1％三氯乙酸沉淀蛋白,分子印迹固相萃取净化.在辛烷磺酸...     

N-苯甲氧羰基-L-色氨酸为模板的单分散分子印迹聚合物微粒的制备

采用两步溶胀与悬浮聚合联用方法,以2-乙烯基吡啶(2-VP)为功能单体,二乙二醇二丙烯酸酯(DEGDA)为交联剂,成功制备出以N-苯甲氧羰基-L-色氨酸(N-Cbz-L-Trp)为模板的单分散分子印迹聚合物,并用扫描电镜、氮气吸附、拉曼光谱、高效液相色谱、热失重分析等测试手段进行表征.结果表明,分子印迹聚合物的平均粒径为6.3μm,多分散系数为1.03.拉曼光谱显示聚合物反应完全,模板分子洗脱充分.高效液相色谱表征显示,分子印迹聚合物在很短的色谱柱中即可实现对印迹分子对映异构体的基线分离.     

金属卟啉分子印迹聚合物的合成与性能研究

以5-(4-羟基苯基)-10,15,20-三苯基卟啉锌为印迹分子,4-乙烯基吡啶为功能单体,乙二醇二甲基丙烯酸酯为交联剂,合成了具有金属卟啉识别能力的分子印迹聚合物.紫外可见滴定光谱研究表明,功能单体与印迹分子在聚合前形成1:1的配合物.通过吸附试验、荧光光谱及斯卡查特分析法,考察了分子印迹聚合物对锌卟啉化合物的识别性能.结果表明,印迹聚合物对结构类似的卟啉化合物具有良好的识别能力,对印迹分子荧光性能的影响远大于其对应的非印迹聚合物.在浓度较低时,印迹聚合物对印迹分子的结合常数和最大结合量分别为:1.61×106L/mol和3.22×10-5mol/g.     

以锌原卟啉为功能单体的分子印迹聚合物对胞嘧啶的识别作用

以锌原卟啉(ZnPP)为功能单体,甲基丙烯酸为共功能单体合成了生物碱基———胞嘧啶的分子印迹聚合物.通过静态吸附紫外检测的方法,对印迹和非印迹聚合物与胞嘧啶及腺嘌呤、尿嘧啶、胸腺嘧啶的结合特性分别进行了对比,分子印迹聚合物(MIP)与非分子印迹聚合物(NMIP)对胞嘧啶的吸附率差值为20.8%,远远高于其他三种碱基,说明MIP对胞嘧啶具有分子识别能力,实现了对胞嘧啶的分子识别.     

美托洛尔球形分子烙印聚合物的制备及吸附性能考察

以聚苯乙烯乳液为种球，以药品美托洛尔为模板分子，甲基丙烯酸为功能单体，二甲基丙烯酸乙二醇酯为交联剂，采用两步溶胀和种子悬浮聚合方法，通过优化反应条件，制得单分散性优良的球形分子烙印聚合物（molecularly imprinted polymers，MIPs）。重点讨论了致孔剂、分散剂和乳化剂的选择、搅拌速度对聚合物的粒径大小和分布、表观形态及吸附性能等的影响。通过聚合物对几种β-受体类药物分子的平衡吸附实验表明，MIP对模板分子美托洛尔具有良好的识别能力。     

Synthesis of a molecularly imprinted polymer for the selective solid-phase extraction of chloramphenicol from honey

Solid-phase extraction (SPE) with a molecularly imprinted polymer (MIP) as sorbent has been investigated for the clean-up of the broad-spectrum bacteriostatic antibiotic chloramphenicol (CAP) in honey samples. The MIP was prepared by using methacrylic acid (MAA) as functional monomer, ethylene glycol dimethacrylate (EDMA) as cross-linker, chloroform as porogen and CAP as template molecule. The binding behaviour of the template CAP on the MIP was evaluated by high-performance liquid chromatography, and then the MIP was applied as a sorbent in SPE to selectively extract CAP from honey. It was shown that recoveries of nearly 100% of a CAP standard solution and up to 94% from spiked honey samples could be obtained after SPE.     

碳纳米管表面绿原酸印迹固相萃取材料的制备及应用

在多壁碳纳米管表面接枝的双键键合,以绿原酸为模板,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用沉淀聚合技术,在碳纳米管表面成功制备绿原酸印迹材料.采用红外光谱、扫描电镜和热重分析研究此印迹材料的性能.结果表明,在碳纳米管表面接枝一层稳定、均匀、30～40 nm厚的印迹材料.采用高效液相色谱研究此印迹材料的吸附动力学及吸附容量,实验结果表明,此印迹材料对绿原酸的结合存在两个结合位点,最大吸附容量Qmax分别为21.5和32.7 μmol/g.以此印迹材料作为固相萃取剂,优化萃取条件,成功应用于金银花提取液中绿原酸的富集分离研究,富集因子达25.     

Recognition of 6-benzyladenine using a molecularly imprinted membrane on a cellulose acetate support

A molecularly imprinted polymer membrane was prepared on a cellulose acetate support by the photopolymerization of methacrylic acid and a cross linker, ethyleneglycol dimethacrylate, in the presence of the template molecules of 6-benzyladenine (BA). The polymeric membrane morphologies were visualized by scanning electron microscopy and its selectivity was evaluated by a permeation test. The association ratio and apparent association constant of the complex formed between the methacrylic acid and BA were determined by cyclic voltammetry, and are 1 : 1 and 204.9, respectively. These results indicated that there existed some complementary cavities on the imprinted membrane corresponding in size, shape, and functional groups to the template molecules of BA. Hence, the imprinted membrane was able to recognize BA. It is predicted that this molecularly imprinted membrane may be applicable to the assay of BA or for the preparation of a molecularly imprinted polymer sensor for the determination of BA in plant samples. The text was submitted by the authors in English.     

Chiral recognition and separation of beta2-amino acids using non-covalently molecularly imprinted polymers

Non-covalently molecularly imprinted polymers (MIPs) for beta2-amino acids were prepared for the first time. N-(2-chlorobenzyloxycarbonyl)-(R)-beta2-homophenylalanine (N-2-ClZ-(R)-beta2-HPhe) was imprinted with methacrylic acid (MAA) and/or 4-vinylpyridine (4-VPy) as the functional monomers, with ethylene glycol dimethacrylate (EDMA) as the cross-linker. The MIPs made with different ratios of MAA:4-VPy were studied in HPLC mode. The results show that MIPs made with 4-VPy yielded the best chiral separation factor (alpha= 1.86) for the template molecule. The importance for an efficient separation of pi-stacking interactions between the MIPs and the template molecule is demonstrated. Racemates of Z-alpha-amino acids and beta-amino acid analogues of the template were either not or poorly resolved by the MIPs, thus demonstrating the close three-dimensional complementarity of the MIPs' recognition sites with the template.     

多壁碳纳米管表面L-组氨酸手性印迹聚合材料的制备及性能表征

通过酰胺化反应在多壁碳纳米管（MWNTs）表面接枝双键,以L-组氨酸（L-His）为模板,甲基丙烯酸（MAA）为功能单体,乙二醇二甲基丙烯酸酯（EGDMA）为交联剂,偶氮二异丁腈（AIBN）为引发剂,利用表面印迹技术,在MWNTs表面制备印迹聚合物（MWNTs-MIPs）．采用红外光谱,扫描电子显微镜和热重分析表征印迹聚合物的性质,结果表明MWNTs表面成功接枝了一层稳定的、厚度为35～40nm具有识别能力的印迹聚合材料．结合高效液相色谱技术,通过填充色谱柱在线色谱分析,探讨不同pH值的流动相下该印迹材料对L-His的分离行为,结果表明MWNTs—MIPs色谱柱在流动相pH=7．0时分离效果最好,能够选择性地识别L-His和D-His,分离度R为1．78,选择因子α为1．28．     

A Novel Method for the Detection of Chlorpyrifos by Combining Quantum Dot-labeled Molecularly Imprinted Polymer with Flow Cytometry

Uniform-sized fluorescent molecularly imprinted polymers were prepared by one-step swelling and suspension polymerization, while chlorpyrifos, methacrylic acid, ethylene glycol dimethacrylate, and oil-soluble CdSe/ZnS quantum dots were used as the carrier, template molecule, functional monomer, cross-linker, and fluorophor, respectively. The morphology, adsorption dynamics, binding ability, and selectivity of quantum dot-labeled molecularly imprinted polymers were evaluated. The dosage of quantum dots for labeling the molecularly imprinted polymers was optimized. The results showed that the optimized dose of quantum dots was 200?µL using a concentration of 8.0?µM. The microsphere size was approximately 10?µm with a honeycombed surface. The quantum dot-labeled molecularly imprinted polymers had an even brightness and a high selectivity. In the presence of different concentrations of chlorpyrifos, a decrease in the fluorescence intensity of the quantum dot-labeled molecularly imprinted polymer was clearly identified by flow cytometry. The whole detection process was accomplished within 2?h including pretreatment. This method was used for the determination of chlorpyrifos in tap water samples.     

基于金属卟啉的分子印迹聚合物的合成及其对三唑类杀菌剂识别性能研究

以三唑类杀菌剂氟环唑为印迹分子,5-(4-甲基丙烯酰氧苯基)-10,15,20-三苯基卟啉锌为功能单体,乙二醇二甲基丙烯酸酯为交联剂,合成了新型的基于金属卟啉的分子印迹聚合物.紫外-可见光谱研究表明印迹分子与功能单体在聚合前形成1∶1配合物.通过选择性吸附和固相萃取表征研究了该印迹聚合物对氟环唑及具有类似化学结构的三唑类杀菌剂的识别能力,并与非印迹聚合物进行了比较,结果表明印迹聚合物具有良好的特异性识别性能,同时,印迹聚合物的交联度及吸附溶剂的极性对印迹效果有着显著影响.     

Fabrication of molecularly imprinted resin via controlled polymerization applied in the enrichment of bisphenol A for plastic products

The addition of bisphenol A has been frequently used in industrial manufacturing because it imparts plastic products with characteristics such as transparency, durability, and excellent impact resistance. However, its widespread use raises concerns about potential leakage into the surrounding environment, which poses a significant risk to human health. In this study, molecularly imprinted polymers with specific recognition of bisphenol A were synthesized through surface-initiated atom transfer radical polymerization using poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) as the substrate, bisphenol A as the template molecule, 4-vinylpyridine as the monomer, and ethylene glycol dimethacrylate as the cross-linker. The bisphenol A adsorption capacity was experimentally investigated, and the kinetic analysis of the molecularly imprinted polymers produced an adsorption equilibrium time of 25 min, which is consistent with the pseudo-second-order kinetic model. The results of the static adsorption experiments exhibited consistency with the Langmuir adsorption model, revealing a maximum adsorption capacity of 387.2 μmol/g. The analysis of molecularly imprinted polymers-enriched actual samples using high-performance liquid chromatography demonstrated excellent selectivity for bisphenol A, with a linear range showing 93.4%–99.7% recovery and 1.1%–6.4% relative standard deviation, demonstrating its high potential for practical bisphenol A detection and enrichment applications.     

分子印迹壳聚糖膜和柚皮苷模板分子间相互作用的研究

以壳聚糖为膜材料,以柚皮苷为模板分子,通过硫酸交联在水相中制备了水相识别柚皮苷分子印迹壳聚糖膜。通过高效液相色谱（HPLC）、紫外光谱（UV）和红外光谱（FT-IR）初步研究了模板分子和功能单体之间的相互作用,表明体系产生了新的氢键。     

离子液体-水双相体系悬浮聚合法制备对苯二酚分子印迹聚合物微球

通过在[Bmim]PF6离子液体-水双相体系中,以对苯二酚为模板分子,甲基丙烯酸为功能单体,二甲基丙烯酸乙二醇脂为交联剂,采用悬浮聚合法制备得到对苯二酚印迹聚合物微球(MIMs-IL),并通过FTIR等测试技术对MIMs-IL进行了表征。对不同离子液体进行了选择,[Bmim]PF6介质中制备的MIMs-IL的识别性能最好。与从氯仿介质中制备的印迹聚合物微球(MIMs-Or)相比较,MIMs-IL的产率为70.8%,明显高于MIMs-Or的48.7%。采用静态吸附法考察其印迹识别能力的结果表明,MIMs-IL对水中的对苯二酚的识别能力大大强于MIMs-Or。对MIMs-IL识别吸附的热力学和动力学研究结果表明,12h时MIMs-IL及其非印迹聚合物微球(nMIMs-IL)均达到各自饱和吸附量,对于0.50g/L对苯二酚水溶液,MIMs-IL的饱和吸附量是nMIMs-IL的2.67倍。     

Selective Preconcentration of Mezlocillin from Eggs by Molecularly Imprinted Polymers on Silica

Surface molecularly imprinted polymers for mezlocillin were used for the selective solid-phase extraction of mezlocillin from eggs. The molecularly imprinted polymers were prepared using mezlocillin as the template, methacrylic acid as the functional monomer, ethylene glycol dimethacrylate as the cross-linker, silica particle as the support and were characterized by infrared spectroscopy, scanning electron microscopy, and thermogravimetric analysis. The adsorption properties of polymers were investigated in detail. The obtained polymers provided high imprinting efficiency to mezlocillin with an imprinting factor of 3.72 and were used as selective sorbents for mezlocillin. Molecularly imprinted solid-phase extraction followed by high-performance liquid chromatography was used for the determination of mezlocillin in eggs and the conditions were evaluated. The average recovery of mezlocillin in fortified eggs was between 69.8 and 82.3% with a relative standard deviation less than 6.9%. The results demonstrate the application of molecularly imprinted polymers for the extraction of mezlocillin from biological samples.     

Molecularly Imprinted Polymers: Compromise between Flexibility and Rigidity for Improving Capture of Template Analogues

New synthetic strategies for molecularly imprinted polymers (MIPs) were developed to mimic the flexibility and mobility exhibited by receptor/enzyme binding pockets. The MIPs were prepared by bulk polymerization with quercetin as template molecule, acrylamide as functional monomer, ethylene glycol dimethacrylate as cross‐linker, and THF as porogen. The innovative grafting of specific oligoethylene glycol units onto the imprinted cavities allowed MIPs to be obtained that exhibit extended selectivity towards template analogues. This synthetic strategy gives promising perspectives for the design of molecular recognition of molecules based on a congruent pharmacophore, which should be of interest for drug development.     

Preparation and evaluation of molecularly imprinted polymers based on 9-ethyladenine for the recognition of nucleotide bases in capillary electrochromatography

A molecularly imprinted polymer (MIP) comprising 9-ethyladenine was polymerized in situ inside the capillary for the electrochromatographic separation of nucleotide bases. The capillary wall was first functionalized with 3-trimethoxysilylpropyl methacrylate (10% v/v) and 1,1-diphenyl-2-picrylhydrazyl (0.01% w/v) in toluene. Following this treatment, the capillary was filled with acetonitrile containing 9-ethyladenine, methacrylic acid, ethylene glycol dimethacrylate, and initiator. After polymerization, the MIP was shrunk into a film against the inner wall of the capillary with the syringe pump. The template was then removed with methanol under nitrogen flow. For evaluation the feasibility of the MIP column for the separation of nucleotide bases, some parameters including the pH, concentration of the background electrolyte, the applied voltage as well as the effect of organic modifier were studied. The migration behavior of nucleotide bases on the MIP column was also compared with that on the bare fused-silica column. The results indicated that the MIP columns demonstrated better recognition properties at a pH range of 6-8. The efficiency (plates/m) at pH 8 for the nonimprinted analyte was 75,300 for cytosine, 50,200 for thymine, and 14,800 for guanine. However, the efficiency for the imprinted analyte, adenine, was quite low. This was evidenced by the broad peak, yielding only 2600 plates/m.