纳米SnO2@TiO2包覆催化剂的制备及表征

采用活性层包覆法在自制细SnO2胶体粒子表面包覆TiO2,制备出SnO2@TiO2包覆型复合催化剂,以其对有机磷农药DDVP的降解效果作为评价光催化活性的标准,对制备条件进行了优化,并用XRD、TEM和BET等手段对样品进行了表征,结果表明,SnO2胶体乙醇溶液含水量20％,钛酸丁酯质量分数为34.5％。灼烧温度680℃时制得TiO2含量56.45％的包覆样品SnO2@TiO2为纳米级粒子,且其光催化活性最佳。     

TiO_2·Al_2O_3/beads光活性的研究

研究以空心玻璃微球为载体 ,用溶胶 凝胶法制备附载型复合光催化剂的过程 .对TiO2 ·Al2 O3/beads光催化活性进行评价 ,并利用XRD、TEM、SEM对附载型复合光催化剂进行表征 ,同时对TiO2 ·Al2 O3/beads的吸附性和比表面进行测试 .结果表明 ,附载型复合光催化剂TiO2 ·Al2 O3/beads光活性显著提高且组分摩尔比存在最佳值 .当n(TiO2 ) /m (Al2 O3) =97/3时 ,其最高光解率为同样降解条件下 ,同样含量DegussaP 2 5TiO2 光解率的 1 5倍左右 .探讨了TiO2 ·Al2 O3/beads光活性提高的主要因素 ,认为纳米尺寸TiO2 和TiO2 ·Al2 O3/beads吸附性是光活性提高的最主要因素 ,另外 ,活化条件和比表面也是影响光活性的主要因素     

SnO2/TiO2复合纳米纤维的制备及光催化性能

采用静电纺丝技术,以聚乙烯吡咯烷酮和钛酸正丁酯为前驱体,制得锐钛矿相TiO2纳米纤维。以TiO2纳米纤维为模板,通过水热合成法,制备了具有异质结构的SnO2/TiO2复合纳米纤维。利用扫描电镜(SEM)、X射线能量色散光谱（EDS）、透射电镜(TEM)和X射线衍射(XRD)等分析测试手段对其形貌和结构进行了表征,结果表明,SnO2纳米粒子均匀地生长在TiO2纳米纤维表面,形成了异质结构的SnO2/TiO2复合纳米纤维材料。通过改变反应物浓度,能有效地实现SnO2/TiO2复合纳米纤维的可控合成。以罗丹明B为模拟污染物,考察了SnO2/TiO2复合纳米纤维的光催化性能,与纯TiO2纳米纤维相比光催化活性明显提高,初步探讨了光催化反应机理。     

SnO2-TiO2复合光催化剂的制备和性能

采用均匀沉淀法在超细TiO2表面包覆SnO2,制备出SnO2-TiO2复合光催化剂,并用EDS,XRD,TEM和BET比表面积测定等手段进行了表征.以活性艳红X-3B溶液为模拟废水,考察了SnO2-TiO2的光催化活性.结果表明,复合粒子由锐钛矿型TiO2和金红石型SnO2组成;与纯TiO2相比,SnO2-TiO2的光催化活性有较大提高,SnO2最佳包覆量为18.4%.复合光催化剂活性的提高归因于不同能级半导体之间光生载流子的输运和分离.     

SnO2-TiO2复合颗粒的形态结构及其光催化活性

在气溶胶反应器中,利用TiCl4高温氧化反应制备超细TiO2,采用均匀沉淀法在TiO2表面沉积SnO2,制备SnO2-TiO2复合颗粒,应用TEM、EDS、XRD、BET比表面积测试等手段对粒子进行表征。以活性艳红X-3B溶液为处理对象,考察复合颗粒的光催化活性。结果表明SnO2-TiO2复合颗粒的光催化活性较纯气相合成超细TiO2有较大提高,SnO2最佳含量为15.3%,SnO2-TiO2复合颗粒光催化活性的提高归因于不同能级半导体之间光生载流子的输运和分离。     

硫酸浸渍La_2O_3掺杂TiO_2光催化剂对甲基橙废水化学耗氧量的影响

采用不同浓度的硫酸溶液浸渍处理La2O3掺杂TiO2,随后经焙烧制得一系列SO24-/TiO2-La2O3光催化剂;考察了SO24-/TiO2-La2O3光催化剂对甲基橙废水溶液化学耗氧量的影响.结果表明,SO24-/TiO2-La2O3的光催化活性比TiO2-La2O3的高;H2SO4浸渍液浓度对SO24-/TiO2-La2O3的光催化活性有一定的影响,H2SO4溶液的最佳浓度为0.5mol/L.同时,催化剂的焙烧温度对其光催化活性也有一定的影响,最佳焙烧温度为500℃;而复合催化剂中La2O3的最佳掺杂量为0.3%.     

TiO_2·SiO_2/beads的制备与性质

研究以空心玻璃微球为载体 ,用Sol gel法制备附载型复合光催化剂的过程 ,并对TiO2 ·SiO2 /beads光催化活性进行评价 .结果表明 :复合型光催化剂TiO2 ·SiO2 摩尔比存在最佳值 ,当n(TiO2 ) /m(SiO2 ) =30 /70时 ,光活性是在同样降解条件下 ,同样含量DegussaP 2 5TiO2 的 2倍左右 .同时研究制备方法、制备条件、TiO2 ·SiO2 摩尔比、TiO2 ·SiO2 /beads吸附性、活化条件、比表面等因素对附载型复合光催化剂活性的影响 .     

脉冲沉积制备Cu_2O/TiO_2纳米管异质结的可见光光催化性能

在用阳极氧化法制备有序排列TiO2纳米管阵列薄膜的基础上,引入脉冲沉积工艺,成功实现了均匀、弥散分布的Cu2O纳米颗粒修饰改性TiO2纳米管阵列,形成Cu2O/TiO2纳米管异质结复合材料.利用场发射扫描电镜(FESEM)、场发射透射电镜(FETEM)、X射线衍射(XRD)、X射线光电子能谱(XPS)和紫外-可见漫反射光谱(UV-Vis DRS)对样品进行表征,重点研究了Cu2O/TiO2纳米管异质结的光电化学特性和对甲基橙(MO)的可见光催化降解性能.结果表明,Cu2O纳米颗粒均匀附着在TiO2纳米管阵列的管口和中部位置,所制备的Cu2O/TiO2纳米管异质结具有高效的可见光光催化性能;在浓度为0.01 mol?L-1的CuSO4溶液中制得的Cu2O/TiO2纳米管异质结表现出最好的电化学特性和光催化性能;另外,对Cu2O纳米颗粒影响光催化活性的机理进行了讨论.     

SnO_2/TiO_2纳米管复合光催化剂的性能及失活再生

基于微波水热法和微乳液法合成SnO2/TiO2纳米管复合光催化剂.通过X射线衍射(XRD)、配有能量色散X射线光谱仪(EDX)的透射电镜(TEM)和电化学手段对光催化剂进行表征.以甲苯为模型污染物,考察光催化剂在紫外光(UV)和真空远紫外光(VUV)下的性能及失活再生.结果表明,SnO2/TiO2纳米管复合光催化剂形成三元异质结(锐钛矿相TiO2(A-TiO2)/金红石相TiO2(R-TiO2)、A-TiO2/SnO2和R-TiO2/SnO2异质结),促使光生电子-空穴对的有效分离,提高光催化活性.SnO2/TiO2表现出最佳的光催化性能,UV和VUV条件下的甲苯降解率均达100%,CO2生成速率(k2)均为P25的3倍左右.但由于UV光照矿化能力不足,中间产物易在催化剂表面累积.随着UV光照时间的增加,SnO2/TiO2逐渐失活,20 h后k2由138.5 mg·m-3·h-1下降到76.1 mg·m-3·h-1.利用VUV再生失活的SnO2/TiO2,过程中产生的·OH、O2-·、O(1D)、O(3P)、O3等活性物质可氧化吸附于催化剂活性位的难降解中间产物,使催化剂得以再生,12 h后k2恢复到143.6 mg·m-3·h-1.UV和VUV的协同效应使UV降解耦合VUV再生成为一种可持续的光催化降解污染物模式.     

TiO_2/SnO_2复合光催化剂的制备及光催化降解敌敌畏

以 Sn Cl4· Ti( OBu) 4、氨水、乙醇为原料 ,采用活性层包覆法 ,制备出 Ti O2 / Sn O2 复合光催化剂 ,并用IR、XRD、TEM和 BET等手段对样品进行了表征 .研究其对有机磷农药敌敌畏的光催化降解效果 ,与单一半导体催化剂 Sn O2 、Ti O2 做了简单对比 .结果表明 :所制 Ti O2 / Sn O2 样品为包覆型结构 ,由锐钛矿型 Ti O2 金红石型 Sn O2 组成 ,与 Sn O2 及 Ti O2 晶体粉末相比所制 Ti O2 / Sn O2 包覆粒子光催化活性得到明显提高 .     

Syntheses of 2-hydroperoxy-and 2-hydroxy-2H-imidazoles

Oxidation of fully substituted imidazoles 1 by singlet oxygen gives in good yield fully substituted 2-hydroperoxy-2H-imidazoles 2 . Reduction of 2 by triphenylphosphine leads to 2-hydroxy-2H-irnidazoles 3 . Limitations of the methods are reported.     

Photocycloaddition of 2-Cyanocycloalk-2-Enones to 2, 3-Dimethylbut-2-Ene

Irradiation of 5,5-dimethyl-6-oxocyclohex- l-ene- l-carbonitrile ( 1 ) in the presence of 2,3-dimethylbut-2-ene afforded 3,3,4,4,7,7-hexamethyl-3,4,4a,5,6,7-hexahydroindeno[1,7-c,d]-],2-oxazole (3) in nearly quantitative yield. In contrast, 4,4-dimethyl-5-oxo-cyclopent-l-ene-l-carbonitrile ( 2 ) under the same conditions reacted not to a tricyclic isoxazole but to a 2:1 mixture of 3,3,6,6,7,7-hexamethyl-2-oxo-bicyclo[3.2.0]heptane-l-carbonitrile ( 4 ) and trans-3,3-dimethyl-2-oxo-5-(2,3-dimethylbut-3-en-2-yl)cyclopentane-l-carbonitrile ( 5 ), respectively.     

Thermal decomposition of Me3SnO2PCl2, Me2Sn(O2PCl2)2 and Ph3SnO2PCl2

TG and DTA studies on Me₃SnO₂PCl₂, Me₂Sn(O₂PCl₂)₂ and Ph₃SnO₂PCl₂ were carried out under dynamic argon atmosphere. The results show that the decomposition proceeds in different stages leading to the formation of Sn₃(PO₄)₂ as a stable product. This compound was characterized by IR spectroscopy. Decomposition schemes involving reductive elimination reactions were proposed.     

Crystal Structures of [Bu2Sn(O2PPh2)2], [Ph2Sn(O2PPh2)2], and [PhClSn(O2PPh2)OMe]2. Raman Spectra of [Ph2Sn(O2PPh2)2] and [PhClSn(O2PPh2)OMe]2

[(n‐Bu)₂Sn(O₂PPh₂)₂] ( 1 ), and [Ph₂Sn(O₂PPh₂)₂] ( 2 ) have been synthesized by the reactions of R₂SnCl₂ (R=n‐Bu, Ph) with HO₂PPh₂ in Methanol. From the reaction of Ph₂SnCl₂ with diphenylphosphinic acid a third product [PhClSn(O₂PPh₂)OMe]₂ ( 3 ) could be isolated. X‐ray diffraction studies show 1 to crystallize in the monoclinic space group P2₁/c with a = 1303.7(1) pm, b = 2286.9(2) pm, c = 1063.1(1) pm, β = 94.383(6)°, and Z = 4. 2 crystallizes triclinic in the space group , the cell parameters being a = 1293.2(2) pm, b = 1478.5(4) pm, c = 1507.2(3) pm, α = 98.86(3)°, β = 109.63(2)°, γ = 114.88(2)°, and Z = 2. Both compounds form arrays of eight‐membered rings (SnOPO)₂ linked at the tin atoms to form chains of infinite length. The dimer 3 consists of a like ring, in which the tin atoms are bridged by methoxo groups. It crystallizes triclinic in space group with a = 946.4(1) pm, b = 963.7(1) pm, c = 1174.2(1) pm, α = 82.495(6)°, β = 66.451(6)°, γ = 74.922(6)°, and Z = 1 for the dimer. The Raman spectra of 2 and 3 are given and discussed.     

Electrochemical study of (NEt4)2Cl2FeS2MoS2 and (NEt4)2Cl2FeS2MoS2FeCl2

Summary The ability of [MoS₄]^2–, anions to be used as ligands for transition metal ions has been widely demonstrated, especially with Fe²⁺. The present study has been restricted to linear complexes such as (NEt₄)₂ [Cl₂FeS₂MoS₂] and (NEt₄)₂[Cl₂FeS₂MoS₂FeCl₂]. Their electrochemical properties are described: upon electrochemical reduction, these compounds yield MoS₂, as a black precipitate, and an iron complex in solution, assumed to be [SFeCl₂]^2–. The electrochemical reduction goes through two electron transfers, coupled with the breakdown of the molecular skeleton: a DISPl and an ECE mechanism. Depending on the solvent, the following equilibrium may be observed: [Cl₄Fe₂MoS₄]^2–[Cl₂FeMoS₄]^2–+FeCl₂. The equilibrium constant, K_D, was evaluated by differential pulse polarography. K_D is tightly related to the donor number of the solvent.     

Homopolymerization of 2-alkyl- and 2-aryl-2-oxazolines

2-Aryl- and 2-alkyl-2-oxazolines have been polymerized to poly-(N-aroyl)aziridines and poly(N-acyl)aziridines, respectively, in the presence of boron trifluoride. The polymers obtained were glassy, light yellow resins with molecular weights ranging from 3500 to 7500 (35–50 oxazoline units per chain). The polymerization rates have been determined for several of these monomers. A polymerization mechanism is proposed.