Modular domain structure: a biomimetic strategy for advanced polymeric materials

A long lasting challenge in polymer science is to design polymers that combine desired mechanical properties such as tensile strength, fracture toughness, and elasticity into one structure. A novel biomimetic modular polymer design is reported here to address this challenge. Following the molecular mechanism used in nature, modular polymers containing multiple loops were constructed by using precise and strong hydrogen bonding units. Single-molecule force-extension experiments revealed the sequential unfolding of loops as a chain is stretched. The excellent correlation between the single-molecule and the bulk properties successfully demonstrates our biomimetic concept of using modular domain structure to achieve advanced polymer properties.     

Luminescent triarylborane-functionalized polystyrene: synthesis, photophysical characterization, and anion-binding studies

A new class of highly fluorescent triarylborane polymers has been prepared from trimethylsilyl-substituted polystyrene via a modular approach that involves selective polymer modification reactions with organometallic reagents. The photophysical properties, environmental stability, and the Lewis acidity of the boron sites have been tailored through modifications in the substitution pattern on boron. The photophysical properties are indicative of electronic communication between the chromophores attached to polystyrene, which has been exploited for the efficient probing of fluoride and cyanide in the micromolar concentration range.     

Modular synthesis of polymers containing 2,5‐di(thiophenyl)‐N‐arylpyrrole

A modular and facile route has been developed to synthesize functionalized 2,5‐di(thiophen‐2‐yl)‐1‐H‐arylpyrroles from readily available starting materials. These units are compatible with various polymerization conditions and are versatile building blocks for conjugated polymers. The polymers show high thermal stability and solubility in a number of solvents. Characterization of the polymers reveals a correlation between molecular packing, controllable by polymer design, and charge carrier mobility. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1133–1139     

Physical organic chemistry of supramolecular polymers

Unlike the case of traditional covalent polymers, the entanglements that determine properties of supramolecular polymers are defined by very specific, intermolecular interactions. Recent work using modular molecular platforms to probe the mechanisms underlying mechanical response of supramolecular polymers is reviewed. The contributions of supramolecular kinetics, thermodynamics, and conformational flexibility to supramolecular polymer properties in solutions of discrete polymers, in networks, and at interfaces, are described. Molecule-to-material relationships are established through methods reminiscent of classic physical organic chemistry.     

Tuning the hemolytic and antibacterial activities of amphiphilic polynorbornene derivatives

Amphiphilic cationic polynorbornene derivatives, soluble in water, were prepared from modular norbornene monomers, with a wide range of molecular weights (M(n) = 1600-137 500 g/mol) and narrow polydispersities (PDI = 1.1-1.3). The antibacterial activity determined by growth inhibition assays and the hemolytic activity against human red blood cells were measured and compared to determine the selectivity of the polymers for bacterial over mammalian cells. The effects of monomer repeat unit hydrophobicity and polymer molecular weight on antibacterial and hemolytic activities were determined. The hydrophobicity of the repeat unit was observed to have dramatic effects on antibacterial and hemolytic activities. Lipid membrane disruption activities of the polymers was confirmed by measuring polymer-induced dye leakage from large unilamellar vesicles. By tuning the overall hydrophobicity of the polymer through random copolymerizations of modular norbornene derivatives, highly selective, nonhemolytic antibacterial activities were obtained. For appropriate monomer composition, selectivity against bacteria versus human red blood cells was determined to be over 100.     

Liquid crystalline side chain polymer with a poly (Geraniol-co-MMA) backbone and phenylbenzoate mesogenic group: synthesis and characterization

A new side chain liquid crystalline polymers have been synthesized and characterized in which [geraniol-co-MMA] polymer are used as a backbone linked via polymethylene spacer to phenyl benzoate mesogenic group. The polymer exhibits enantiotropic liquid crystallinity with nematic phase and does not exhibit side chain crystallization .A clear difference between the nature of the mesophase is evidenced between [Geraniol-co-MMA] main chain and methacrylate polymers .The LC polymer exhibit glass transition at 40 °C. In a comparative analysis, we discuss the relevance of polymer backbone in the synthesis of side chain liquid crystalline polymers.     

Temperature-induced crystallization and compactibility of spray dried composite particles composed of amorphous lactose and various types of water-soluble polymer

The purpose of this study was to investigate the temperature-induced crystallization and the compactibility of the composite particles containing amorphous lactose and various types of polymers. The composite particles were prepared by spray-drying an aqueous solution of lactose and various types of gel forming water-soluble polymers at various formulating ratios. The stabilizing effect of hydroxypropylcellulose (HPC) and polyvinyl pyrrolidone (PVP) on amorphous lactose in the composite particles was smaller than that of sodium alginate in comparing at the same formulating ratios. The difference in the stability of amorphous lactose in the composite particles was attributed to the difference in the glass transition temperature (Tg) of the composite particles caused by the polymers formulated. The tensile strength of compacted spray-dried composite particles containing the polymers was higher than commercial lactose for direct tabletting (DCL21). The tensile strength of the composite particles was increased with an increase in water content in the particles. The difference in compactibility of the composite particles containing the different amount of polymer and water could be explained by the difference in Tg of the particles.     

两亲性树状聚合物*

树状聚合物及其功能化是近年来高分子科学界的研究热点之一。本文综述了不同类型的树状聚合物,分别有聚酯、聚丙三醇、聚乙烯亚胺等超支化聚合物,聚酰胺-胺、聚丙烯亚胺等树枝状聚合物。通过对树状聚合物末端大量官能团的亲水（亲油）改性可以制备两亲性树状聚合物,改性方法主要有酰胺化反应、酯化反应、麦克尔加成反应等。与通过缩聚反应所得到的上述树状聚合物不同,近年来配位聚合领域出现的通过“链行走”机理形成的树状聚乙烯,引起了高度关注,这方面着重介绍了乙烯与极性单体直接共聚合或者采用链行走与原子转移自由基聚合联用制备两亲性树状乙烯聚合物。最后对两亲性树状聚合物领域的发展前景进行了展望。     

End group transformations of RAFT‐generated polymers with bismaleimides: Functional telechelics and modular block copolymers

End group activation of polymers prepared by reversible addition‐fragmentation chain transfer (RAFT) polymerization was accomplished by conversion of thiocarbonylthio end groups to thiols and subsequent reaction with excess of a bismaleimide. Poly(N‐isopropylacrylamide) (PNIPAM) was prepared by RAFT, and subsequent aminolysis led to sulfhydryl‐terminated polymers that reacted with an excess of 1,8‐bismaleimidodiethyleneglycol to yield maleimido‐terminated macromolecules. The maleimido end groups allowed near‐quantitative coupling with model low molecular weight thiols or dienes by Michael addition or Diels‐Alder reactions, respectively. Reaction of maleimide‐activated PNIPAM with another thiol‐terminated polymer proved an efficient means of preparing block copolymers by a modular coupling approach. Successful end group functionalization of the well‐defined polymers was confirmed by combination of UV–vis, FTIR, and NMR spectroscopy and gel permeation chromatography. The general strategy proved to be versatile for the preparation of functional telechelics and modular block copolymers from RAFT‐generated (co)polymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5093–5100, 2008     

Supramolecular polymers as dynamic multicomponent cellular uptake carriers

Supramolecular synthesis represents a flexible approach to the generation of dynamic multicomponent materials with tunable properties. Here, cellular uptake systems based on dynamic supramolecular copolymers have been developed using a combination of differently functionalized discotic molecules. Discotics featuring peripheral amine functionalities that endow the supramolecular polymer with cellular uptake capabilities were readily synthesized. This enabled the uptake of otherwise cell-impermeable discotics via cotransport as a function of supramolecular coassembly. Dynamic multicomponent and multifunctional supramolecular polymers represent a novel and unique platform for modular cellular uptake systems.     

Effectiveness of cell adhesive additives in different supramolecular polymers

Supramolecular motifs in elastomeric biomaterials facilitate the modular incorporation of additives with corresponding motifs. The influence of the elastomeric supramolecular base polymer on the presentation of additives has been sparsely examined, limiting the knowledge of transferability of effective functionalization between polymers. Here it was investigated if the polymer backbone and the additive influence biomaterial modification in two different types of hydrogen bonding supramolecular systems, that is, based on ureido-pyrimidinone or bis-urea units. Two different cell-adhesive additives, that is, catechol or cyclic RGD, were incorporated into different elastomeric polymers, that is, polycaprolactone, priplast or polycarbonate. The additive effectiveness was evaluated with three different cell types. AFM measurements showed modest alterations on nano-scale assembly in ureido-pyrimidinone materials modified with additives. On the contrary, additive addition was highly intrusive in bis-urea materials. Detailed cell adhesive studies revealed additive effectiveness varied between base polymers and the supramolecular platform, with bis-urea materials more potently affecting cell behavior. This research highlights that additive transposition might not always be as evident. Therefore, additive effectiveness requires re-evaluation in supramolecular biomaterials when altering the polymer backbone to suit the biomaterial application.     

含杯芳烃聚合物的合成与应用

杯芳烃在主客体化学中是继冠醚和环糊精之后被广泛关注的第三代主体分子,能够选择性地与客体分子或离子形成络合物。近年来,含杯芳烃聚合物逐渐受到人们的重视。结合聚合物稳定性好,易于加工的特性,含杯芳烃聚合物将有望被开发成为新型功能高分子材料。本文详细介绍了含杯芳烃聚合物的合成及其应用。     

Purification of protein and recycling of polymers in a new aqueous two-phase system using two thermoseparating polymers

In this study we present a new aqueous two-phase system where both polymers are thermoseparating. In this system it is possible to recycle both polymers by temperature induced phase separation, which is an improvement of the aqueous two-phase system previously reported where one of the polymers was thermoseparating and the other polymer was dextran or a starch derivative. The polymers used in this work are EO50PO50, a random copolymer of 50% ethylene oxide (EO) and 50% propylene oxide (PO), and a hydrophobically modified random copolymer of EO and PO with aliphatic C14H29-groups coupled to each end of the polymer (HM-EOPO). In water solution both polymers will phase separate above a critical temperature (cloud point for EO50PO50 50 degrees C, HM-EOPO, 14 degrees C) and this will for both polymers lead to formation of an upper water phase and a lower polymer enriched phase. When EO50PO50 and HM-EOPO are mixed in water, the solution will separate in two phases above a certain concentration i.e. an aqueous two-phase system is formed analogous to poly(ethylene glycol) (PEG)/dextran system. The partitioning of three proteins, bovine serum albumin, lysozyme and apolipoprotein A-1, has been studied in the EO50PO50/HM-EOPO system and how the partitioning is affected by salt additions. Protein partitioning is affected by salts in similar way as in traditional PEG/dextran system. Recombinant apolipoprotein A-1 has been purified from a cell free E. coli fermentation solution. Protein concentrations of 20 and 63 mg/ml were used, and the target protein could be concentrated in the HM-EOPO phase with purification factors of 6.6 and 7.3 giving the yields 66 and 45%, respectively. Recycling of both copolymers by thermoseparation was investigated. In protein free systems 73 and 97.5% of the EO50PO50 and HM-EOPO polymer could be recycled respectively. Both polymers were recycled after aqueous two-phase extraction of apolipoprotein A-1 from a cell free E. coli fermentation solution. Apolipoprotein A-1 was extracted to the HM-EOPO phase with contaminating proteins in the EO50PO50 phase. The yield (78%) and purification factor (5.5) of apolipoprotein A-1 was constant during three polymer recyclings. This new phase system based on two thermoseparating polymers is of great interest in large scale extractions where polymer recycling is of increasing importance.     

Star-shaped polymers for DNA sequencing by capillary electrophoresis

The separation and sequencing of DNA are the main objectives of the Human Genome Project, and this project has also been very useful for gene analysis and disease diagnosis. Capillary electrophoresis (CE) is one of the most common techniques for the separation and analysis of DNA. DNA separations are usually achieved using capillary gel electrophoresis (CGE) mode, in which polymer gel is packed into the capillary. Compared with a traditional CGE matrix, a hydrophilic polymer matrix, which can be adsorb by the capillary wall has numerous advantages, including stability, reproducibility and ease of automation. Various water-soluble additives, such as linear poly(acrylamide) (PAA) and poly(N,N-dimethylacrylamide) (PDMA), have been employed as media. In this study, different star-shaped PDMA polymers were designed and synthesized to achieve lower polymer solution viscosity. DNA separations with these polymers avoid the disadvantages of high viscosity and long separation time while maintaining high resolution (10 bp between 271 bp and 281 bp). The influences of the polymer concentration and structure on DNA separation were also determined in this study; higher polymer concentration yielded better separation performance, and star-like polymers were superior to linear polymers. This work indicates that modification of the polymer structure is a potential strategy for optimizing DNA separation.     

Surface forces between telechelic brushes revisited: the origin of a weak attraction

Telechelic polymers are useful for surface protection and stabilization of colloidal dispersions by the formation of polymer brushes. A number of theoretical investigations have been reported on a weak attraction between two telechelic brushes when they are at the classical contact, i.e., when the surface separation is approximately equal to the summation of the brush thicknesses. While recent experiments have confirmed the weak attraction between telechelic brushes, its origin remains elusive because of conflicting approximations used in the previous theoretical calculations. In this paper, we have investigated the telechelic polymer-mediated surface forces by using a polymer density functional theory (PDFT) that accounts for both the surface-adhesive energy and segment-level interactions specifically. Within a single theoretical framework, the PDFT is able to capture both the depletion-induced attraction in the presence of weakly adhesive polymers and the steric repulsion between compressed polymer brushes. In comparison of the solvation forces between telechelic brushes with those between brushes formed by surfactant-like polymers and with those between two asymmetric surfaces mediated by telechelic polymers, we conclude that the weak attraction between telechelic brushes is primarily caused by the bridging effect. Although both the surfactant-like and telechelic polymers exhibit a similar scaling behavior for the brush thickness, a significant difference has been observed in terms of the brush microstructures, in particular, the segment densities near the edges of the polymer brushes.     

Peculiarities of flow and viscoelastic properties of solutions of polymers with a narrow molecular-weight distribution

The concepts developed for flexible-chain linear high-molecular-weight polymers of narrow molecular weight distribution, according to which transition from the fluid to the highelastic state at increased shear rates is accompanied by loss of fluidity, have been extended to concentrated solutions of these polymers. The change of principal viscoelastic characteristics, in a concentration range which can be associated with the effect of formation of an entanglement network in polymer solution, is considered. On the basis of the parameters characterizing the viscous properties of dilute polymer solutions (the intrinsic viscosity and the Martin constant), a generalized representation of the dependence of the initial viscosity of polybutadiene solutions on concentration over the entire range up to bulk polymer has been derived.     

Discrete macromolecular constructs via the Diels–Alder “Click” reaction

Functional polymeric materials with desired properties can be designed by precise control of macromolecular architectures. Over the recent years, click reactions have enabled efficient synthesis of a variety of polymers with different topologies via efficient polymer–polymer conjugations. While the copper catalyzed Huisgen type (3+2) dipolar cycloaddition between azide and alkyne has been widely used toward this goal, the Diels–Alder (DA) reaction offers an alternative click reaction that allow efficient macromolecular conjugations, oftentimes without the need of any additional reagent or catalyst. This article highlights, with illustrative examples, the power of the DA “click” reaction to efficiently synthesize a variety of different well‐defined macromolecular constructs in a modular fashion. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A Modular Method for the High‐Yield Synthesis of Site‐Specific Protein–Polymer Therapeutics

A versatile method is described to engineer precisely defined protein/peptide–polymer therapeutics by a modular approach that consists of three steps: 1) fusion of a protein/peptide of interest with an elastin‐like polypeptide that enables facile purification and high yields; 2) installation of a clickable group at the C terminus of the recombinant protein/peptide with almost complete conversion by enzyme‐mediated ligation; and 3) attachment of a polymer by a click reaction with near‐quantitative conversion. We demonstrate that this modular approach is applicable to various protein/peptide drugs and used it to conjugate them to structurally diverse water‐soluble polymers that prolong the plasma circulation duration of these proteins. The protein/peptide–polymer conjugates exhibited significantly improved pharmacokinetics and therapeutic effects over the native protein/peptide upon administration to mice. The studies reported here provide a facile method for the synthesis of protein/peptide–polymer conjugates for therapeutic use and other applications.     

Recent progress in EPR study of spin labeled polymers and spin probed polymer systems

The EPR technique is commonly used for the detection and characterization of paramagnetic centers in chemical science. This method can provides a lot of information, such as identity, structure, dynamics, interaction, orientation, glass transition temperature, adsorption behavior, functionality, phase behavior, nano-inhomogeneities, and conformation of the free-radical portion of the polymer chain. Most polymers intrinsically possess diamagnetic properties, so in order to study polymers with EPR, paramagnetic centers need to be incorporated into the polymer systems. Spin labeling and spin probing are main methods of covalently attaching paramagnetic centers to polymer chains or embedding them in polymer matrices through non-covalent interactions, respectively. Spin labeling and spin probing techniques for polymers and polymer systems (especially with nitroxide radicals) have also been studied, which have a profound impact on polymer science. This review focuses on the continuous wave EPR technique and introduces the recent advances in spin labeled polymers and spin probed polymer systems in EPR research.     

Easy to optimize: dynamic combinatorial libraries of metal-dye complexes as flexible sensors for tripeptides

A dynamic combinatorial library (DCL) of dye complexes of Cu2+ and Ni2+ was used to sense the sequence isomeric tripeptides His-Gly-Gly, Gly-His-Gly, and Gly-Gly-His. The DCL sensor was obtained by mixing buffered aqueous solution of three commercially available dyes together with CuCl2 and NiCl2. The addition of the peptide analytes resulted in characteristic changes in the UV-vis spectrum of the mixture, which allowed the identification of the peptide. Due to the modular nature of the sensor, it was possible to optimize the sensor by variation of the amounts and ratio of its constituent building blocks. The composition of the best sensor was found to vary substantially, depending on the sensing problem to be addressed. Whereas a Cu2+/Ni2+ ratio of 1:3 gave the best differentiation for Gly-His-Gly and Gly-Gly-His, a sensor containing exclusively Cu2+ was found to provide the best discrimination between His-Gly-Gly and Gly-Gly-His.