溶剂挥发法制备萃取剂微胶囊

萃取剂微胶囊的制备是利用微囊化方法将萃取剂包覆起来 ,解决传统液液萃取中的两相相分散、相混合、相分离以及溶剂的损失和设备结构复杂等问题 .用简单易控制的溶剂挥发法成功制备了聚砜及聚苯乙烯材料包覆的多种萃取剂 (如磷酸三丁酯 ,2 乙基己基磷酸 ,三辛胺和Aliquat 336 )微胶囊 ,并考察了壁材和分散剂的选择对不同萃取剂进行包覆的影响 ,同时研究了搅拌速度和膜溶液组成对微胶囊的形态、萃取剂包覆量的影响 .结果表明 ,(1)用聚砜作壁材可以包覆磷酸三丁酯、2 乙基己基磷酸 ,而用聚苯乙烯可以包覆三辛胺、Aliquat336 ;(2 )对于不同的O W乳液体系 ,只有选择合适的分散剂 ,才能得到理想球形状、分散性好的微胶囊 ;(3)增大搅拌速度可以降低液滴尺度 ,从而减小微胶囊粒径 ;(4)膜溶液组成的影响则表现在两个方面 ,一是膜溶液的粘度和两相界面张力是除搅拌速度外微胶囊粒径的决定因素 ,二是膜溶液中壁材与萃取剂的比例优化时 ,才能得到萃取剂包覆量高的微胶囊 .     

Microencapsulation of PCMs with a polystyrene shell

Microencapsulation of different phase change materials (PCMs) with a polymer shell of polystyrene by suspension polymerization has been carried out. This method based on a suspension polymerization allows the encapsulation of non-polar PCMs, while that it was not possible to encapsulate the polar PCMs (polyglycols). This study deals with preparation and characterization of encapsulated paraffin wax. Thermal properties, the morphology and the particle size distribution of the microcapsules obtained were determined by differential scanning calorimetry, scanning electron microscopy and laser diffraction, respectively. This encapsulated paraffin wax could be considered to have good potential for energy storage.     

Formation of Pickering emulsion by use of PCM and SiC and application to preparation of hybrid microcapsules with interfacial polycondensation reaction

It was tried to form Pickering emulsion by use of paraffin wax as a phase change material (PCM) and SiC as solid powder and to apply to the preparation of the hybrid microcapsules with the interfacial polycondensation reaction. Pickering emulsion could be formed by stirring PCM and SiC in the continuous water phase. The mean diameter of PCM droplets in the (O/W) emulsion decreased with the added amount of SiC. The SiC weight adhered on the surface of PCM droplets become the maximum in the continuous phase with pH 6.8. The hybrid microcapsules with the shell made of SiC and polyurea resin film could be prepared by using Pickering emulsion. There was a critical adhesion weight of SiC, above which the hybrid microcapsules could not be formed. Thermal conductivity of hybrid microcapsules could be improved as compared with the PCM microcapsules. Copyright © 2015 John Wiley & Sons, Ltd.     

包埋苯甲酸钠微球的制备及在海洋防污涂料中的抑菌研究

用溶剂挥发法制备了可以包埋海洋防污剂苯甲酸钠的聚苯乙烯聚合物微球,并实现了防污剂在海洋防污涂料中的的缓慢释放.讨论了影响微球性能的一些因素,聚合物微球的粒径分别随着温度的降低,分散剂浓度的升高以及搅拌速度的提高而减小.采用标准曲线法,对防污剂释放速度进行了分析,并与未用微球包埋的苯甲酸钠释放速度进行对比,缓释效果明显....     

十八烷/聚(St-MMA)相变微胶囊制备及表征

采用乳液聚合的方法,分别选取聚苯乙烯(PS)、聚甲基丙烯酸甲酯(PMMA)或苯乙烯和甲基丙烯酸甲酯的共聚物为壁材,正十八烷为芯材,十二烷基苯磺酸钠(SDBS)为乳化剂,制作相变储能微胶囊。用粒径分析仪、透射电子显微镜(TEM)、热重分析仪(TG)和示差扫描量热测试仪(DSC)对微胶囊的形貌、相变热性能和热稳定性分别进行表征。结果表明:壁材选取两者共聚物,当两种单体的比例为St∶MMA=1∶5,SDBS用量为1.5g(总质量的3%)时,微胶囊粒径大小均匀,粒子分散性好,壁材的包裹性好。微胶囊的放热峰为起始温度为27.3℃,终止温度为31.9℃,相变温度为28.9℃,相变焓为48.4J/g。TG表明长期使用温度不能超过131℃。IR分析微胶囊中含有芯材和壁材。这种十八烷/聚(St-MMA)相变微胶囊可以用于诸能材料。     

The effect of temperature,catalyst, different carrier gases and stirrer on the produced transportation hydrocarbons of LLDPE degradation in a stirred reactor

The pyrolysis of linear low density polyethylene (LLDPE) by used fluid catalytic cracking (FCC) catalyst was studied in a stirred reactor to reach the appropriate transportation hydrocarbons. In this work, the effect of process parameters such as degradation temperature, catalyst/polymer ratio (%), carrier gas type and stirring rate on the condensed yield, product composition and residence time were considered. Product evaluation was performed by GC analyzer and paraffin, naphthene, olefin and aromatic plus carbon number and average molecular weight of the products were measured under different process parameters.Temperature and catalyst as the basic parameters show remarkable effect on the LLDPE cracking. The maximum transportation condensate yield reaches at 450 °C and 20% catalyst respectively although increase of temperature and catalyst content, decrease the residence time patently. Based on the results, molecular weight and reactivity of the carrier gas as mass transfer factor also play a key role in the process. A decrease in molecular weight of the carrier gas led to increase the condensate yield and decrease the residence time. Meanwhile increasing of the carrier gas reactivity could increase the condensate hydrocarbons. Hydrogen as reactive and lower molecular weight carrier gas increases the condensed yield patently. The study showed that stirring rate as a function of heat transfer and temperature homogenizer also affects on the condensate hydrocarbons positively. The maximum condensate yield was found to occur at 50 rpm although the residence time decreases with stirring rate increasing.     

乙烯-醋酸乙烯酯-α-烯烃三元共聚物

以乙烯、醋酸乙烯酯和α-烯烃为原料,以偶氮二异丁腈为引发剂,通过高压本体聚合制备三元聚合物.考察了聚合条件对共聚物数均分子量和醋酸乙酯(VA)质量分数的影响.结果表明:在引发剂用量为1.1g,反应压力为6 MPa,反应温度95℃,醋酸乙烯酯和α-烯烃的质量比为2:1的条件下能得到数均分子量为8 600和VA质量分数为0.35的产物.实验证明该产物性能优良,可作为蜡的添加剂.     

Kinetics of two-phase bulk polymerization. II. The influence of dissolved polymer

The effect of dissolved polybutadiene on the initial rate of polymerization of styrene was investigated by using high-precision dilatometric techniques. The dissolved polymer reduced the rate of polymerization by amounts greater than can be accounted for by a reduction in monomer concentration. Rate reductions increased with the amount of dissolved polybutadiene and with its molecular weight and were greater for benzoyl peroxide initiator than for equal concentrations of azobisisobutyronitrile. Surprisingly, analogous rate reductions were observed when polystyrene were substituted for the polybutadienes, except that at high polystyrene concentrations, the expected autoacceleration was observed. These rate reductions showed no correlation with the viscosity of the reaction mass, nor did the dissolved polymer affect initiator efficiency. At a given level of a particular dissolved polybutadiene, rate reductions were diminished by increasing levels of each initiator, and by adding a chain-transfer agent. Good quantitative agreement was obtained with the number-average length of the growing polymer chains, whether varied by using different initiators, changing initiator level, or adding chain-transfer agent. These results are inconsistent with a chemical mechanism, but they are explained by a proposal originated by North and Reed whereby the dissolved polymer makes the reaction mass a “poorer” solvent for the growing polymer chains, reducing their overall coil dimensions and enhancing their rate of diffusion together for termination.     

Synthesis of microcapsules with polystyrene/ZnO hybrid shell by Pickering emulsion polymerization

Polystyrene/zinc oxide (ZnO) hybrid microcapsules having polystyrene as inner shell and ZnO nanoparticles as outer shell were synthesized by Pickering emulsion polymerization method. ZnO nanoparticles were used to form the colloidosomes that worked as the polymerization vessels, where both styrene monomer and crosslink agent were polymerized together. Fourier transform infrared spectra and thermogravimetric thermograms showed the existence of ZnO and polystyrene in the shell of hybrid microcapsules. The hollow structure and the different morphology under various conditions were also observed by field emission scanning electron microscopy. In addition, the shell thickness of hybrid microcapsules increased as the monomer concentration increased. The photoluminescence property of PS/ZnO hybrid microcapsules could be maintained without any noticeable variation by comparing with the pure ZnO particles. It could be reasonably deduced that hybrid hollow microspheres with multifarious polymer as inner shell and ZnO nanoparticles as outer shell would be produced for many applications.     

三聚氰胺-甲醛树脂包裹环氧树脂微胶囊的制备及表征

针对环氧树脂基材料的自修复,选取四氢邻苯二甲酸二缩水甘油酯作为芯材,采用三聚氰胺-甲醛树脂为壁材,对其进行微胶囊化包裹.结果表明,制得的具有单囊结构的环氧树脂微胶囊,胶囊粒径较小(约6.7μm)、囊壁较薄(约0.2μm)、芯含量较高(83.2 wt%),囊壁内、外表面光滑致密,胶囊具有良好的密闭性和耐热性;在微胶囊化过程中,三聚氰胺-甲醛树脂的缩聚反应动力学起关键作用,芯材没有参与囊壁形成的交联反应;包裹后的芯材活性保持不变,胶囊被复合到材料过程中囊芯活性也保持不变;胶囊的强度较高,能承受与基体材料复合过程中的外力作用,且与基体材料间粘结良好,在裂纹形成过程中能够随基体同时开裂.     

Influence of the Operative Conditions on the Characteristics of Poly(D,L-lactide-co-glycolide) Synthesized in Supercritical Carbon Dioxide

Summary: The co-polymerizations of D,L -lactide and glycolide in supercritical carbon dioxide (scCO₂) using zinc (II) ethylhexanoate (ZnOct₂) as catalyst and methanol as initiator have been investigated. The influence of stirring rate (N), temperature (T), and mass carbon dioxide (m_CO2) on molecular weight distribution (MWD); co-polymer composition; and conversion has been studied by means an experimental factorial design. The stirring rate has the greatest influence on conversion. Due to the heterogeneous nature of the process the mass transfer enhancement, that the grater turbulence produces, favors greatly the incorporation of monomers into the polymer phase. An important decrease of molecular weight is observed independently of reaction conditions for high conversion values because some thermal degradation or rearrangement reactions are taking place. The influence of the initiator, methanol, on the molecular weight has been also studied. Methanol acts as an effective chain transfer agent initiating more growing chains than expected, what also contributes to get low molecular weights.     

聚合物负载的CpTiCl3催化苯乙烯间规聚合

苯乙烯间规聚合催化剂［１］的发现引起了工业界和学术界的重视［２～４］,现已积极开展了各方面的工作,其中之一就是将催化剂负载化［５～９］．但是以往的研究表明,将均相催化剂负载于无机载体上,如Ａｌ２Ｏ３,ＭｇＣｌ２和ＳｉＯ２等,催化剂的活性大大降低,所得...     

Biocompatible microcapsules with a water core templated from single emulsions

We use single emulsions as templates to fabricate monodisperse biocompatible microcapsules with a water core. These microcapsules are fabricated using FDA-approved polymer and non-toxic solvents and are of great use in drugs, cosmetics and foods.     

Solvent-responsive structural colored balloons

The structural colored balloons (SCBs) consisting of polymer microcapsules showed several structural colors developed by optical thin-layer interference. The SCBs were prepared using a mixture of low- and high-molecular-weight polystyrene to give solvent responsiveness. When the surrounding solvent was transferred from water to the acetone/water mixture using a flow cell, the SCBs swelled at first and shrunk subsequently. The gradual color change of the SCBs was observed along with the size change. The color change accompanying the size change was successfully reproduced by assuming that the total amount of polymer in the thin film does not change. The swelling rate was rationalized by the diffusion of solvent through the shell polystyrene film to the inside of the balloons.     

Responsive core-shell latex particles as colloidosome microcapsule membranes

Responsive core-shell latex particles are used to prepare colloidosome microcapsules using thermal annealing and internal cross linking of the shell, allowing the production of the microcapsules at high concentrations. The core-shell particles are composed of a polystyrene core and a shell of poly[2-(dimethylamino)ethyl methacrylate]-b-poly[methyl methacrylate] (PDMA-b-PMMA) chains adsorbed onto the core surface, providing steric stabilization. The PDMA component of the adsorbed polymer shell confers thermally responsive and pH-responsive characteristics to the latex particle, and it also provides glass transitions at temperatures lower than those of the core and reactive amine groups. These features facilitate the formation of stable Pickering emulsion droplets and the immobilization of the latex particle monolayer on these droplets to form colloidosome microcapsules. The immobilization is achieved through thermal annealing or cross linking of the shell under mild conditions feasible for large-scale economic production. We demonstrate here that it is possible to anneal the particle monolayer on the emulsion drop surface at 75-86 °C by using the lower glass-transition temperature of the shell compared to that of the polystyrene cores (～108 °C). The colloidosome microcapsules that are formed have a rigid membrane basically composed of a densely packed monolayer of particles. Chemical cross linking has also been successfully achieved by confining a cross linker within the disperse droplet. This approach leads to the formation of single-layered stimulus-responsive soft colloidosome membranes and provides the advantage of working at very high emulsion concentrations because interdroplet cross linking is thus avoided. The porosity and mechanical strength of the microcapsules are also discussed here in terms of the observed structure of the latex particle monolayers forming the capsule membrane.     

Preparation of Hybrid Nanocapsules

Hybrid nanoparticles with a polystyrene core and a hybrid copolymer shell were used to produce hybrid nanocapsules by dissolving the polystyrene core from the previously elaborated core-shell particles. Following previous works, the core-shell particles were prepared by emulsion polymerization of styrene and subsequent addition of γ-methacryloxy propyl trimethoxy silane (MPS) to produce the shell by copolymerization reaction of MPS with the residual styrene. Core extraction was performed by diluting the core-shell particles in an excess of tetrahydrofuran (THF). Two procedures were investigated to separate the dissolved polymer chains from the nanocapsules. In the first procedure, the polymer was isolated by successive centrifugation and redispersion in THF, whereas in the second procedure, the free polymer chains were removed by dialysis. The polymer molecular weight was optimized in order to promote dissolution of the polymer chains and allow them to diffuse through the shell.     

Production of uniform-sized polymer core-shell microcapsules by coaxial electrospraying

Spherical polymeric core-shell microcapsules in uniform size were produced by electrospraying with a coaxial nozzle setup. Contrary to the usual coaxial setup, the inner nozzle was slightly bent to touch the inside wall of the outer nozzle. A polymer solution for the core was introduced through the outer nozzle, and the other solution for the shell was supplied through the inner nozzle. The setup greatly increased reproduction of the same results. As a proof of the concept, core-shell microcapsules consisting of a PS or PMMA core and a PCL shell (PS@PCL, PMMA@PCL) were produced. When the volumetric feed rate of the shell-forming PCL solution was higher than that of the core-forming PS or PMMA solution the core-shell structures in uniform size were readily obtained. In contrast, irregular morphologies were observed when the feed rate of the PCL solution was slower or equal to that of the PS or PMMA solution. The size of the colloid was dependent on the relative feed ratio between the polymer solutions as well as the magnitude of applied voltage.     

Multicore-shell PNIPAm-co-PEGMa microcapsules for cell encapsulation

The overall goal of this study was to fabricate multifunctional core-shell microcapsules with biological cells encapsulated within the polymer shell. Biocompatible temperature responsive microcapsules comprised of silicone oil droplets (multicores) and yeast cells embedded in a polymer matrix (shell) were prepared using a novel microarray approach. The cross-linked polymer shell and silicone multicores were formed in situ via photopolymerization of either poly(N-isopropylacryamide)(PNIPAm) or PNIPAm, copolymerized with poly(ethylene glycol monomethyl ether monomethacrylate) (PEGMa) within the droplets of an oil-in-water-in-oil double emulsion. An optimized recipe yielded a multicore-shell morphology, which was characterized by optical and laser scanning confocal microscopy (LSCM) and theoretically confirmed by spreading coefficient calculations. Spreading coefficients were calculated from interfacial tension and contact angle measurements as well as from the determination of the Hamaker constants and the pair potential energies. The effects of the presence of PEGMa, its molecular weight (M(n) 300 and 1100 g/mol), and concentration (10, 20, and 30 wt %) were also investigated, and they were found not to significantly alter the morphology of the microcapsules. They were found, however, to significantly improve the viability of the yeast cells, which were encapsulated within PNIPAm-based microcapsules by direct incorporation into the monomer solutions, prior to polymerization. Under LSCM, the fluorescence staining for live and dead cells showed a 30% viability of yeast cells entrapped within the PNIPAm matrix after 45 min of photopolymerization, but an improvement to 60% viability in the presence of PEGMa. The thermoresponsive behavior of the microcapsules allows the silicone oil cores to be irreversibly ejected, and so the role of the silicone oil is 2-fold. It facilitates multifunctionality in the microcapsule by first being used as a template to obtain the desired core-shell morphology, and second it can act as an encapsulant for oil-soluble drugs. It was shown that the encapsulated oil droplets were expelled above the volume phase transition temperature of the polymer, while the collapsed microcapsule remained intact. When these microcapsules were reswollen with an aqueous solution, it was observed that the hollow compartments refilled. In principle, these hollow-core microcapsules could then be filled with water-soluble drugs that could be delivered in vivo in response to temperature.     

Fabrication strategy for amphiphilic microcapsules with narrow size distribution by premix membrane emulsification

Amphiphilic co-polymer, which can maintain the stability of proteins and increase the protein loading efficiency, is considered as an exploring-worthy biodegrade polymer for drug delivery. However, amphiphilic microcapsules prepared by conventional methods, such like mechanical stirring and spray-drying methods, exhibit broad size distributions due to its hydrophilic sequences, leading to poor reproducibility. In this study, we employed poly(monomethoxypoly ethylene glycol-co-D,L-lactide) (mPEG-PLA, PELA), one of common amphiphilic polymers, as model to focus on investigating the process parameters and mechanisms to prepare PELA microcapsules with narrow size distribution and regular sphericity by combining premix membrane emulsification and double emulsion technique. The coarse double emulsion with broad size distribution was repeatedly pressed through Shirasu Porous Glass (SPG) membrane with relatively high pressure to form the fine emulsion with narrow size distribution. Then, the microcapsules with narrow size distribution can be obtained by solvent extraction method. It was found that it was more difficult to obtain PELA microcapsules with narrow size distribution and smooth surface due to its amphiphilic property, compared with the cases of PLA and PLGA. The smooth surface morphology was found to be related to several factors including internal water phase with less volume, slower stirring rate during solidification and using ethyl acetate as oil phase. It was also found that mass ratio of hydrophilic mPEG, stabilizer PVA concentration in external water phase and transmembrane pressure played important role on the distribution of microcapsules size. The suitable preparation conditions were determined as follows: for the membrane with pore size of 2.8 μm, the mass ratio of PLA/mPEG was 19:1, volume ratio of W(1)/O was 1:10 and O/W(2) was 1:5, PVA concentration (w/v) was 1.0%, magnetic stirring rate during solidification was 60 rpm and 300 kPa was chosen as transmembrane pressure. There was a linear relationship between the diameter of microcapsules and the pore size of the membranes. Finally, by manipulating the process parameters, PELA microcapsules with narrow size distributions (coefficient of variation was less than 15%), smooth morphology and various sizes, were obtained. Most importantly, the key factors affecting fabrication have been revealed and mechanisms were illustrated in detail, which would shed light on the research of amphiphilic polymer formulation.     

Microencapsulation of styrene with melamine-formaldehyde resin

Melamine-formaldehyde (MF) resin-walled microcapsules containing styrene were prepared by in situ polymerization in an oil-in-water emulsion. In response to the characteristics of styrene (i.e., high volatility, non-polarity, low molecular weight, and low viscosity), the synthesis method was improved by optimizing the reaction conditions accordingly. It was found that utilization of macromolecular emulsifier of lower molecular weight, moderate dispersion rate, and higher feeding weight ratio of core/shell monomers is critical for the fast formation of capsules’ wall. The highest loading of styrene in the resultant microcapsules can be about 60%, and mean diameter of the capsules fell in the range of 20∼71 μm, which can be adjusted by changing processing parameters. It is believed that the present work provides a feasible approach to encapsulate monomers for manufacturing polyester based self-healing composites.