Synthesis of Flavin–Calix[4]arene Conjugate Derivatives

The synthesis of two new flavin substituted calix[4]arene derivatives, 9 and 10 , is described. The first flavin substituted calix[4]arene derivative 9 was synthesized by the reaction of 3‐methylalloxazine ( 5 ) with 25,27‐bis(3‐bromopropoxy)‐26,28‐dihydroxy‐5,11,17,23‐tetra(tert‐butyl)calix[4]arene ( 4 ) in high yield (92%). The other derivative 10 was prepared from 3‐methylalloxazine‐1‐acetic acid ( 7 ) and 25,27‐bis(3‐cyanopropoxy)calix[4]arene ( 3 ). All new compounds were characterized by a combination of FT‐IR and ¹H‐NMR spectroscopy, and elemental‐analysis techniques.     

Synthesis and Properties of a Series of Novel Calix[6]arene Diazo Derivatives

In this study, seven new compounds p-(4-butyl-phenylazo)calix[6]arene(1), p-(4-(phenylazo)phenylazo)calix[6]arene (2),p-(4-hydroxyphenylazo)calix[6]arene (3),p-{4-[N-(thiazol-2-yl)sulfamoyl]phenylazo\}calix[6]arene(4), p-(4-acetamidophenylazo)calix[6]arene (5),p-(thiazol-2-ylazo)calix[6]arene (6) andp-(2-sulfanylphenylazo)calix[6]arene (7) have been synthesizedfrom calix[6]arene by diazo coupling with the corresponding aromaticamines. UV-Vis, IR, ¹H and ¹³C NMR spectral data have been used to elucidate the structures of the compounds elemental analyses     

Utilization of transport efficacy of novel calix[4]arene-embedded polymer inclusion membrane towards trace metals

In this study, 25,27-bis(3-mercaptopropoxyl)-26,28-dihydroxy calix[4]arene was successfully synthesized from the reaction of calix[4]arene-dialkylbromide derivative with thiourea. The structure of 25,27-bis(3-mercaptopropoxyl)-26,28-dihydroxy calix[4]arene was fully characterized using ¹HNMR, ¹³CNMR and elemental analysis techniques. The obtained mercapto-substituted calix[4]arene derivative was employed as an additive material along with cellulose triacetate (CTA) and 2-nitrophenyl octyl ether (o-NPOE) for the preparation of a novel polymer inclusion membrane (C@PIM). The structure and surface morphology of mercapto-substituted calix[4]arene-embedded polymer inclusion membrane was determined using thermogravimetric analysis, scanning electron microscopy and elemental analysis techniques. Donnan dialysis system was also used to assess the transport efficacy of C@PIM towards Pb(II), Zn(II), Cu(II), Ni(II), Cd(II) and Co(II) ions. The results show that new C@PIM exhibited 99% transport efficacy but also selectivity toward Ni(II) and other ions.     

杯芳烃接枝超细SiO2的制备及其对Cu2+、Ag+萃取性能的研究

通过对杯[4]芳烃以及杯[6]芳烃上缘进行烯丙基化和硅氢加成2步衍生化反应得到硅氢化杯[4]芳烃以及硅氢化杯[6]芳烃,再将这2种硅氢化杯芳烃衍生物分别接枝到超细SiO₂上。在不同的pH值条件下,就2种杯芳烃接枝超细SiO₂衍生物对水合Cu²⁺及Ag⁺的萃取性能进行了研究。结果表明,与对叔丁基杯芳烃相比较,杯芳烃接枝超细SiO₂衍生物对Cu²⁺和Ag⁺的萃取率都有所提高,其中杯[4]芳烃接枝超细SiO₂对Ag⁺的最高萃取率达到98.78%,杯[6]芳烃接枝超细SiO₂对Cu²⁺的最高萃取率达到67.74%。     

Syntheses of Lower-Rim-1,3-Crowned Calix[6]Arenes and their Complexation Abilities Toward Cations

An approach to lower-rim-1,3-crowned calix[6]arene and its derivatives in one-pot process has been accomplished. In the presence of very excess Na2C03 (27-150 equivalent per mole p-tert-butyleal ix[6]arene 1) in acetonitrile, the lower-rim-1,3-bridged calix[6]crown-3 (4), the bistosylethoxy-ethyl derivative of 4 (5), as well as the intermediate of 4, monotosylethoxyethyl p-tert-butylcalix[6]arene 3, were obtained in rational yields, the distribution of the three compounds varied with the amount of the base used and other selected experimental conditions. 4 exhibits high selectivity towards Li⁺. 3 may be the first example of ionophore with high Et2NH2⁺ selectivity.     

Calix[4]Arenes in the partial cone conformation as ionophores in silver ion-selective electrodes

Two calix[4]arene derivatives, in the partial cone conformation, with sulfur-containing functionalities, were tested as neutral carrier ionophores in potentiometric silver-selective electrodes of conventional membrane and membrane-coated glassy carbon electrode types. Comparison with a calix[4]arene in the cone conformation was made. The membranes were prepared using either 2-nitrophenyl octyl ether or bis(ethylhexyl)sebacate as plasticizers and potassium tetrakis(p-chlorophenyl)borate as the lipophilic salt in a poly(vinyl chloride) matrix. Both calix[4]arenes yielded electrodes of good sensitivity (approx. 47 mV dec⁻¹) in the range 10⁻⁴–10⁻¹ M and excellent selectivity [log K_Ag,_MH+ < −1.5] of transition, alkali and heavy metal cations, including sodium, mercury(II) and lead(II) cations. Temperature effects and reproducibility of response were determined and the interfering effects of mercury(II) and lead (II) ions on the membranes were noted. The partial cone conformation allows improved selectivity over certain cations relative to calix[4]arenes in the cone conformation.     

The Synthesis of Nitrogen-Containing Calixarene Derivatives and their Interactions with Lead Ions

Several new nitrogen-containingcalixarene derivatives have been synthesized andtheir ion-binding properties investigated byUV spectroscopy and solventextraction. These derivatives include5,11,17,23-tetra-t-butyl-25,26,27,28-tetrakis(piperidinocarbonylmethoxy)calix[4]arene (5),5,11,17,23,29,35,41,47-octa-t-butyl-49,50,51,52,53,54,55,56-octa(piperidinocarbonylmethoxy)calix[8]arene (6) and5,11,17,23,29,35,41,47-octa-t-butyl-49,50,51,52,53,54,55,56-octa(N,N-diethyl-car-bamoyl-methoxy)calix[8]arene(7). The UV spectra of and 7revealed they had an ability to transform tight lead picrate ionpairs into separated ones by complexationwith Pb²⁺ in tetrahydrofuran.Both derivatives give 1 : 1 complexes with Pb²⁺. Extraction studies showed that these derivativescould efficiently extract Pb²⁺ (as picrate salts) from the aqueous phase into chloroform. Theextractability of these derivatives were also compared with that ofthe oxygen-containing ester derivative calix[8]arene 2 and the other two nitrogen-containingcompounds 8 and 9.     

新型多重氮杂杯[4]芳烃衍生物的合成

对叔丁基杯[4]芳烃-1,3-二醛基衍生物1与水杨酰肼、烟酰肼、异烟酰肼反应, 合成了具有开链结构新型杯[4]多重氮杂衍生物2a～2c, 产率分别为88%, 85%和90%. 化合物1与乙二酰肼、丙二酰肼、己二酰肼反应, 得到具有桥联结构的新型杯[4]多重氮杂衍生物3a～3c, 产率分别为86%, 89%和90%. 新化合物的结构经元素分析、质谱、核磁共振谱等表征证实, 杯[4]芳烃单元均为1,3-取代且采取锥式构象.     

Preparation of calix[4]arene-embedded polysulphone membranes,and utilisation of its Cr(VI) transport efficiency

In this study, a tetramine-substituted calix[4]arene derivative, which was synthesised from calix[4]arene by treatment with dimethylamine in one step via Mannich reaction, was used to fabricate a new calix[4]arene-embedded polysulphone membrane (calix@membrane). Its structure and surface morphology were determined using thermogravimetric analysis and scanning electron microscopy, and elemental analysis techniques. Moreover, a Donnan dialysis system was employed to investigate Cr(VI) transport efficacy of calix@membrane at different pH values. Results showed that calix@membrane represented a promising transport capability for HCr₂O₇^? due to their efficient complexation behaviour.     

Novel redox receptors for ion-pair and α-amino acid: synthesis and complexation properties of calix[4]arene derivatives bearing large conjugated ferrocene groups

By reacting calix[4]arene 1,3-bi-hydrazide derivative (2) with formacylferrocene in “1?+?2” condensation mode, novel calix[4]arene derivative bearing two conjugated ferrocene groups (3) was obtained in yield of 88%. By reacting 1,3-bi-substituted [2-(p-formylphenyloxy)ethyloxy]-p-tert-butylcalix[4]arene (5) with 1,1′-diacetylferrocene hydrazone (4) in “1?+?1” condensation mode, novel calix[4]arene derivative with 1,3-substituted large conjugated ferrocene bridge (6) was synthesized in yield of 83%. The structures and conformations of new compounds were confirmed by elemental analyses, IR spectra, ESI-MS, ¹H NMR, etc. The electrochemical cyclic voltammetry experiments revealed that compounds 3 and 6 possessed excellent reversible electrochemical properties. The ¹H NMR titration study showed that compound 6 possessed excellent complexation abilities for NaH₂PO₄ and glycine in 1:1 host–guest complex with the association constants of 3,850 and 2,460?M^?1, respectively.     

A tetraester derivative of fluorescent calix[4]arene bearing a proton-ionizable moiety for highly sensitive extraction-fluorometric determination of sodium ion

In this study, we report the highly sensitive extraction-fluorometric detection system of Na⁺ using flow injection analysis with a tetraester derivative of fluorescent calix[4]arene. In liquid-liquid extraction experiments, the fluorescent intensity of calix[4]arene derivative 1 bearing a p-nitrophenol moiety was highly dependent on pH and the Na⁺ concentration in the aqueous phase. On the other hand, such phenomenon was not observed in the case of calix[4]arene derivative 2, which is almost the same structure as 1 except for a p-nitrophenol moiety. These results show that the proton dissociation of the p-nitrophenol moiety decisively affects the fluorescence intensity of 1. Owing to these fluorescence responsiveness, a calibration graph of the Na⁺ concentration could be successfully prepared using flow injection analysis with good linearity at the tens of nanomolar level. The tetraester scaffold of calix[4]arene was essential to the detection of Na⁺ in such a very low concentration range.     

Exploration of Pb2+ Selective Behavior of Calix[6]arene Ester Derivative

The selective behavior of calix[n]arene ester derivatives in two-phase extraction systems using polarographic technique has been investigated. Calix[4]arene tetraester derivative shows remarkable Na⁺ over Pb²⁺ selectivity; whereas calix[6]arene hexaester derivative shows Pb²⁺ over Na⁺ selectivity. The interference of some selected cations (Na⁺, K⁺, Cu²⁺ and Mg²⁺) were also examined and no significant effect on the selectivity behavior as well as extraction ability of these ionophores was found except Na⁺. The study reveals for the first time that the calix[6]arene hexaester derivative is highly Pb²⁺ selective ionophore and can be employed in the field of sensor as well as separation science and technology. The work also highlights the usefulness of polarographic technique in trace metal determination.     

Synergistic extraction of cesium,strontium, and europium with adamantylated thiacalix[4]arenes in the presence of chlorinated cobalt dicarbollide

Synergistic extraction of long-lived fission products ¹³⁷Cs⁺, ⁸⁵Sr²⁺, and ¹⁵²Eu³⁺ from dilute HNO3 into dichloroethane with ligands derived from p-(1-adamantyl)thiacalix[4]arene in mixtures with chlorinated cobalt dicarbollide was studied. An extraordinary synergistic effect is observed in extraction of europium with p-(1-adamantyl)thiacalix[4]arene tetraacetate derivative. Amides of p-(1-adamantyl)thiacalix-[4]arene tetracarboxylic acid are selective toward europium, although their extraction ability toward the examined ions is lower than that of the classical extractant, p-(1-adamantyl)calix[4]arene tetracarboxylic acid diethylamide.     

Anion‐binding properties of two calix[4]arene derivatives containing two ferrocene imine or ferrocene amine units at the upper rim

Calix[4]arene derivatives containing ferrocene units at the upper rim have been synthesized and their anion‐binding and sensing investigated towards anions such as chloride, bromide and hydrogen sulfate by cyclic voltammetry. Electrochemical studies show that these redox‐active ligands electrochemically recognize chloride and bromide anions. These compounds have excellent selectivity for chloride and bromide ions, in the comparison with hydrogen sulfate anion. With ferrocenyl Schiff base calix[4]arene 1 an anodic shift as large as 302 mV is observed on addition of four equivalents of Cl⁻ anion. Also electrochemical and UV–vis spectroscopic titrations ferrocenyl calix[4]arene derivatives 1 with chloride and bromide ions and 2 (only with Cl⁻) indicate a 1:1 binding‐stiochiometry. Copyright © 2011 John Wiley & Sons, Ltd.     

Comparative study of calix[4]arene derivatives: implications for ligand design

The first comparative theoretical study of three parent calix[4]arene analogues (calix[4]arene, thiacalix[4]arene, and homooxacalix[4]arene) has been performed using molecular dynamic simulations and density functional theory (MPWB1K/6-311G^∗∗//B3LYP/6-311G^∗∗) methods. The theoretical observations herein including optimized geometry, polarity, and atomic charge data provide that homooxacalix[4]arene would offer more efficient platform for metal ion recognition compared to thiacalix[4]arene or calix[4]arene.     

Terpyridine-Functionalized Calixarenes: Synthesis,Characterization and Anion Sensing Applications

Lanthanide complexes have been developed and are reported herein. These complexes were derived from a terpyridine-functionalized calix[4]arene ligand, chelated with Tb³⁺ and Eu³⁺. Synthesis of these complexes was achieved in two steps from a calix[4]arene derivative: (1) amide coupling of a calix[4]arene bearing carboxylic acid functionalities and (2) metallation with a lanthanide triflate salt. The ligand and its complexes were characterized by NMR (¹H and ¹³C), fluorescence and UV-vis spectroscopy as well as MS. The photophysical properties of these complexes were studied; high molar absorptivity values, modest quantum yields and luminescence lifetimes on the ms timescale were obtained. Anion binding results in a change in the photophysical properties of the complexes. The anion sensing ability of the Tb(III) complex was evaluated via visual detection, UV-vis and fluorescence studies. The sensor was found to be responsive towards a variety of anions, and large binding constants were obtained for the coordination of anions to the sensor.     

超分子自组装合成杯[4]芳烃黄原酸镍(Ⅱ)配合物

利用二维和三维的大环及笼状主体分子与金属离子直接进行自组装反应合成新型有机无机杂化分子是当前超分子领域的研究热点之一。这类分子不仅具有新奇的光、电、磁等特性，而且还可作为新型的主体分子在客体识别、催化、吸附与分离等方面有广阔的应用前景。杯芳烃是有机超分子领域广受     

Aminolysis reaction of calix [ 4 ] arene esters and crystal structures and conformational behaviors of calix[4]arene amides

We first make use of aminolysis of calix[4]arene esters to synthesize calix[4]arene amides. When the two ethyl esters of the calix[4]arene esters are aminolysized, the 1, 3-amide derivative is formed selectively. The crystal structures of the calix-[4]arene with two butyl amide (3b) and four butyl amide moieties (4b) were determined. The intermolecular hydrogen bonds make 4b form two-dimensional net work insolid state. The 1H NMR spectra prove that 3b is of a pinched cone conformation, while 4b and tetraheptylamide-calix[4]arene (6b) take fast interconversion between two C2v isomers in solution and appear an apparent cone conformation at room temperature. As decreasing temperature, the interconversion rate decreases gradually and, finally, the interconversion process is frozen at Tc = -10℃, which makes both conformations of 4b and 6b the pinched cone structures. The hydrogen bond improves the interconversion barrier, and the large different values of the potential barrier between 6b and 4b (or 6b) may     

Synthesis and complexation study of calix[4]arene diamine derivative incorporated in a polymeric backbone with chiral monomers

The novel chiral polymeric compounds containing more than one calix[4]arene have been synthesized by reacting a new calix[4]arene diamine derivative with two chiral monomers. These newly prepared compounds were studied by extraction of toxic heavy metal (Cu²⁺, Co²⁺, Cd²⁺, Hg²⁺), silver and alkali metal (Na⁺, K⁺) cations from aqueous phase. It was observed that the resulting calixarene-based polymers have a good complexing ability towards silver, alkali metal and toxic heavy metal cations.