电化学及光谱电化学方法研究辅酶B_(12)模型化合物的生成与解离.Ⅰ.

本文用电化学及光谱电化学方法研究了钴卟啉与苄基氯的相互作用,表明形成有σ钴—碳键的辅酶B_(12)模型化合物的前提条件是钴卟啉的中心钴氧化态必须降低到I价.讨论了σ钴—碳键的形成和解离与电位的关系,现场检测到辅酶B_(12)模型化合物的形成和解离的紫外可见光谱,提出了钴卟啉与苄基氯的ECE作用机理.     

薄层光谱电化学法测定辅酶B12模型化合物的生成速率常数

用薄层光谱电化学方法和单电位-计时吸收光谱法(SPS-CA),测得钴四苯基卟啉(CoTPP)分别与碘甲烷、苄基氯和氯丁烷形成含σ钴-碳键辅酶B₁₂模型化合物的速率常数为11.09、1.62×10²和6.93×10^-2mol^-1·L·s^-1。钴卟啉与这3种卤代烷的反应是二级反应,对各自的反应物Co(Ⅰ)TPP和卤代烷都是一级反应。     

辅酶B12模型化合物生成与解离电化学研究(II)

用电化学方法研究了钴卟啉与多种直链溴代烷的相互作用，表明１价钴卟啉可以与溴代烷形成有σ钴－碳键的辅酶Ｂ１２模型化合物。计算了Ｉ价钴卟啉与各种直链溴代烷的加合速率常数。详细讨论了直链烷烃的链长与模型化合物生成速率及烷基钴卟啉负离子稳定性的关系。讨论了几种模型化合物的优劣。     

烷基钴卟啉[(TPP)CoR]的电化学合成和现场伏安/现场光谱电化学研究

本文报道甲基、乙基、丙基和丁基钴卟啉化合物的电化学合成和现场伏安、现场光谱电化学研究,烷基化反应的速度被确定.这些烷钴卟啉还原反应生成烷基饱和的四苯基chlorin钴化合物.     

烷基钴叶啉[(TPP)CoR]的电化学合成和现场伏安/现场光谱电化学研究

本文报道甲基、乙基、丙基和丁基钴卟啉化合物的电化学合成和现场伏安、现场光谱电化学研究.烷基化反应的速度被确定.这些烷基钴卟啉还原反应生成烷基饱和的四苯基chlorin钴化合物.     

含多个氧化还原中心的卟啉化合物的电化学及光谱电化学行为(Ⅰ)

在DMF及DMSO中用循环伏安法、现场紫外可见光谱电化学方法及现场FT-IR光谱电化学方法研究了含多个氧化还原中心的卟啉化合物[四(对-硝基苯基)卟啉合钴(Ⅱ)]的氧化还原性质。指出该化合物的第一步氧化或第一步还原为中心金属钴失去或得到1个电子;第二步还原为卟啉环meso位的4个对硝基苯基上的硝基在同一电位下各得1个电子,形成相应的阴离子自由基;第三步还原为卟啉环得到1个电子,但该步反应不可逆。同时发现硝基与卟啉环及中心金属钴之间存在分子内电子相互作用,而4个硝基取代基之间未发现分子内电子相互作用。     

含多个氧化还原中心的卟啉化合物的电化学及光谱电化学行为(Ⅰ)

在DMF及DMSO中用循环伏安法、现场紫外可见光谱电化学方法及现场FT-IR光谱电化学方法研究了含多个氧化还原中心的卟啉化合物[四(对-硝基苯基)卟啉合钴(Ⅱ)]的氧化还原性质。指出该化合物的第一步氧化或第一步还原为中心金属钴失去或得到1个电子；第二步还原为卟啉环meso位的4个对硝基苯基上的硝基在同一电位下各得1个电子,形成相应的阴离子自由基；第三步还原为卟啉环得到1个电子,但该步反应不可逆。同时发现硝基与卟啉环及中心金属钴之间存在分子内电子相互作用,而4个硝基取代基之间未发现分子内电子相互作用。     

（TPP）Ni（Ⅱ）氧化反应的电化学和光谱电化学研究

（ＴＰＰ）Ｎｉ（Ⅱ）氧化反应的电化学和光谱电化学研究严川伟，王振新，林祥钦（中国科学院长春应用化学研究所电分析化学开放实验室，国家电化学和光谱研究分析中心长春１３００２２）关键词镍卟啉，阴离子配位，电化学，光谱电化学镍卟啉是一类重要的仿生模型化合物，...     

杯芳烃-金属卟啉仿酸酶模型化合物的合成及其电子光谱研究

本文首次报导杯芳烃-金属卟啉键联化合物作为仿细胞色素P-450酶模型的合成。对紫外-可见光谱进行了较详细的研究,将模型化合物与相应未键联杯芳烃的卟啉化合物光谱比较,发现兰移现象,从而说明杯芳烃卟啉键联物中, 杯环与卟啉环之间存在相互影响。金属离子插入后其相互作用加强。     

杯芳烃-金属卟啉仿酶模型化合物的合成及其电子光谱研究(英文)

本文首次报道杯芳烃-金属卟啉键联化合物作为仿细胞色素P-450酶模型的合成。对紫外-可见光谱进行了较详细的研究,将模型化合物与相应未键联杯芳烃的卟啉化合物的光谱比较,发现兰移现象,从而说明杯芳烃卟啉键联物中,杯环与卟啉环之间存在相互影响。金属离子插入后其相互作用加强。     

Structural and oxo-transfer reactivity differences of hexacoordinate and pentacoordinate (nitro)(tetraphenylporphinato)cobalt(III) derivatives

The oxo-transfer catalyst (nitro)(pyridyl)cobalt(III) tetraphenylporphyrin has been reinvestigated by substitution of the distal pyridine ligand with 4-N,N-dimethylaminopyridine and 3,5-dichloropyridine. Differences in their structures and in the reactivity of the compounds toward catalytic secondary oxo transfer were investigated by FT-IR and UV-visible spectroscopy, cyclic voltammetry, X-ray diffraction, semiempirical calculations, and reactions with alkenes in dichloromethane solution. Very modest differences in the hexacoordinate compounds' structures were predicted and observed, but the secondary oxo-transfer reactivity at the nitro ligand varies markedly with the basicity of the pyridine ligand and the position of the coordination equilibrium. Oxo transfer occurs rapidly through the pentacoordinate species (nitro)cobalt(III) tetraphenylporphyrin that is generated by dissociation of the pyridine ligand and therefore is strongly related to the Hammett parameters of these nitrogenous bases. The reactive pentacoordinate species CoTPP(NO(2)) can be generated in solution by addition of lithium perchlorate to (py)CoTPP(NO(2)) by Lewis acid-base interactions or more simply by using the weaker Lewis base Cl(2)py instead of py as the distal ligand. In contrast to pentacoordinate (nitro)iron porphyrins, disproportionation reactions of CoTPP(NO(2)) compound are not evident. This pentacoordinate derivative, CoTPP(NO(2)), is reactive enough to stoichiometrically oxidize allyl bromide in minutes. Preliminary catalytic oxidation reaction studies of alkenes also indicate the involvement of both radical and nonradical oxo-transfer steps in the mechanism, suggesting formation of a peroxynitro intermediate in the reaction of the reduced CoTPP(NO) with O(2).     

Co-N4大环配合物分子应用于异相电催化CO2还原

利用可再生能源产生的电能催化二氧化碳还原(CO₂RR)是可持续制备碳基化学品的一种潜在途径.电催化剂是实现这个转化的关键,目前还需要深入地研究机理去优化催化剂的设计.M-N₄结构的大环配合物是一类结构明确、性能易调控的分子电催化剂,是研究结构-性能关系的理想平台.其中,金属酞菁在异相电催化CO₂RR中展现出较好的催化性能,受到广泛关注.而其它M-N₄结构大环配合物(如金属卟啉、金属咔咯)在异相电催化CO₂RR中报道较少,且催化性能一般.本文对比研究了酞菁钴(CoPc)、四苯基卟啉钴(CoTPP)和三苯基咔咯钴(CoTPC)三种分子异相电催化CO₂RR的性能,揭示制约金属卟啉和金属咔咯分子应用于异相体系的原因,并提出改进方法.首先采用碳纳米管(CNT)复合的方法对三种分子进行了研究.结果表明,只有CoPc能够与CNT形成性能优异的复合电催化剂,而CoTPP和CoTPC复合电催化剂几乎不具备活性.这是因为这两种分子具有扭曲的苯环导致分子与CNT作用力弱,在复合物里面只有很少的分子锚定在CNT上.本文采用直接滴涂法制备三种分子与CNT物理混合电极,并研究了分子载量对催化性能的影响.结果表明,在1.08×10^-8molcm^-2低分子载量时,CoTPP+CNT和Co TPC+CNT样品基本无活性,它们的电催化活性随着分子载量的提升而显著增加.在5.4×10^-7molcm^-2的高载量时,CoTPC+CNT和CoTPP+CNT样品在-0.67 V(相对可逆氢电极,下同)的电位下分别展现出14.0和7.61 mA cm^-2的CO分电流密度,是1.08×10^-8 molcm^-2载量样品的8.7和7.9倍.这说明对于Co TPP和CoTPC分子,可以通过加大载量来增加与CNT作用几率,从而提高电极活性.然而,基于CoPc制备的样品活性随着CoPc分子载量的增加变化不明显.这是由于在低载量下CoPc分子已经很好地与CNT相互作用,并且CNT上CoPc分子负载量是有限的,继续增大载量只会导致聚集.本文进一步发展一种聚乙烯吡啶(PVP)桥连的办法,提升CoTPP和CoTPC在低载量下的电极活性.聚乙烯链能够通过疏水作用缠绕在CNT上,同时吡啶能够与分子金属中心配位,从而为分子与CNT结合建立桥梁.当分子载量为1.08×10^-8mol cm^-2时,CoTPP+CNT/PVP在-0.67 V电位下展现出85%以上的CO法拉第效率,而且CO分电流密度达到7.84 mA cm^-2,是没有添加PVP对比样CoTPP+CNT的8倍.由此可见,分子与基底的相互作用强度对异相电催化CO₂RR的性能有重要影响.对于与基底相互作用弱的大环配合物分子可以通过大分子载量的滴涂法或引入桥连分子来提高电极性能.这些方法可以拓展到其它分子体系,有助于构建高效的异相分子电催化剂.     

强磁场对四苯基卟啉及其Co(Ⅱ)/Zn(Ⅱ)配合物的影响

为研究强磁场对卟啉类化合物的影响,以四苯基卟啉(TPP)为研究对象,比较分析了无外加磁场和强磁场条件下TPP的结晶,及Co~(2+)、Zn~(2+)与TPP的配位反应。采用X射线粉末衍射测试不同磁场强度下获得的TPP晶体,紫外分光光度计快速测定了不同磁场强度下配合物产率,并分析了配位反应的动力学。TPP的结晶度随磁场强度的增强而提高,晶体尺寸随磁场强度的增加而增大;随磁场的增强,四苯基钴卟啉(CoTPP)和四苯基锌卟啉(ZnTPP)的产率下降,但两者的反应动力学不受磁场影响,其反应速率随磁场强度提高而下降。由研究结果可知,强磁场有利于四苯基卟啉的结晶取向,四苯基卟啉在溶液中垂直于磁场取向是配位反应速率降低的主要原因,随磁场强度的增加,四苯基卟啉的取向程度提高。     

醚化β-环糊精的制备及其混合膜对二甲苯异构体的选择性

采用WilliamSon合成法使氯化苄(PhCH2Cl)与β-环糊精(β-CD)进行醚化反应.红外光谱表明,所得产物为醚化β-CD.根据元素分析结果,计算出各反应的取代度和转化率.系统地考察了反应条件对转化率和取代度的影响.此外,考察了醚化β-CD与聚乙烯醇缩丁醛(PVB)共混膜对含10%对二甲苯的对/间二甲苯混合液的渗透气化性能的影响.结果显示,30℃时,共混膜的分离因子α可达1.16,而对二甲苯PX的渗透通量J高达70.57g/(m2·h).     

Synthesis and Crystal Structures of Three Ladder Distannoxane Dimers [（PhCH2）2（Cl）SnOSn（X）（CH2Ph）2]2（X=Cl,OMe,OEt）

Three distannoxane dimers[(PhCH2)2(Cl)SnOSn(X)(CH2Ph)2]2(X=Cl,OMe,OEt)were prepared by the hydrolytic reaction of (PhCH2)2SnCl2 with sodium alkoxides.The compounds are assigned tetranuclear distannoxane structures in solid state.which contain the so-called ladder arrangement with a central planar Sn2O2 four-membered ring.The endo-and exo-cyclic Sn atoms are both five-coordinate,and have distorted trigonal bipyramidal geometries.A variety of hydrolyses of(PhCH2)2SnCl2 were performed and these dimers were characterized by IR,^1H NMR spectroscopy and X-ray diffraction analysis.     

Synthesis and Characterization of Cobalt-Carbon Core-Shell Microspheres in Supercritical Carbon Dioxide System

The synthesis of cobalt-carbon core-shell microspheres in supercritical carbon dioxide system was investigated. Cobalt-carbon core-shell microspheres with diameter of about 1 μm were prepared at 350 oC for 12 h in a closed vessel containing an appropriate amount of bis(cyclopentadienyl)cobalt powder and dry ice. Characterization by a variety of techniques, including X-ray powder diffraction, X-ray photoelectron spectroscopy, Transmission electron microscope, Fourier transform infrared spectrum and Raman spectroscopy analysis reveals that each cobalt-carbon core-shell microsphere is made up of an amorphous cobalt core with diameter less than 1 μm and an amorphous carbon shell with thickness of about 200 nm. The possible growth mechanism of cobalt-carbon core-shell microspheres is discussed, based on the pyrolysis of bis(cyclopentadienyl)cobalt in supercritical carbon dioxide and the deposition of carbon or carbon clusters with odd electrons on the surface of magnetic cobalt cores due to magnetic attraction. Magnetic measurements show 141.41 emu/g of saturation magnetization of a typical sample, which is lower than the 168 emu/g of the corresponding metal cobalt bulk material. This is attributed to the considerable mass of the carbon shell and amorphous nature of the magnetic core. Control of magnetism in the cobalt-carbon core-shell microspheres was achieved by annealing treatments.     

Synthesis and electrochemical studies of a covalently linked cobalt(II) phthalocyanine-cobalt(II) porphyrin conjugate

The synthesis of a cobalt phthalocyanine-cobalt porphyrin heteropentamer (cobalt(II) phthalocyanine-tetrakis(cobalt(II) tetrakis(5-phenoxy-10,15,20-triphenylporphyrin))), (CoPc-(CoTPP)4), containing four units of cobalt tetraphenylporphyrin linked to a central cobalt phthalocyanine macrocycle via ether linkages is reported. Cyclic voltammetry and spectroelectrochemistry were employed to characterize the complexes. Cyclic voltammetry and square wave voltammetry revealed nine processes. Spectroelectrochemistry of the pentamer confirmed that reduction occurs on the individual components in an alternating manner; the first reduction occurring on the CoTPP moieties, the second on the CoPc moiety, the third on the CoTPP moieties and so on. Oxidation occurred first on the CoPc moiety of the pentamer.     

Addition of AlkylHalide toward a Tungsten-Phosphorus Double Bond

The terminal phosphide complex of tungsten Cp(CO) 3 W{PN(Me)CH 2 CH 2 PNMe} ( 3 ) prepared from Cp(Sn n Bu 3 )(CO) 2 W{PN(Me)CH 2 CH 2 NMe(OMe)}, BF 3 ;OEt 2 , and NaBPh 4 in situ reacts with PhCH 2 Cl to give cis -Cp(CO 2 )ClW{PN(Me)CH 2 CH 2 NMe(CH 2 Ph)} ( cis-4 ). During the reaction, C--Cl bond addition takes place toward a tungsten-phosphorus double bond. In contrast, isolated 3 does not react with PhCH 2 Cl. Isolated 3 , however, reacts with PhCH 2 Cl in the presence of BPh 3 and BF 3 to give trans-4 and cis-4 , respectively.     

Enhanced Catalytic Activity of Cobalt Porphyrin in CO2 Electroreduction upon Immobilization on Carbon Materials

In a comparative study of the electrocatalytic CO₂ reduction, cobalt meso-tetraphenylporphyrin (CoTPP) is used as a model molecular catalyst under both homogeneous and heterogeneous conditions. In the former case, employing N,N-dimethylformamide as solvent, CoTPP performs poorly as an electrocatalyst giving low product selectivity in a slow reaction at a high overpotential. However, upon straightforward immobilization of CoTPP onto carbon nanotubes, a remarkable enhancement of the electrocatalytic abilities is seen with CO₂ becoming selectively reduced to CO (>90 %) at a low overpotential in aqueous medium. This effect is ascribed to the particular environment created by the aqueous medium at the catalytic site of the immobilized catalyst that facilitates the adsorption and further reaction of CO₂. This work highlights the significance of assessing an immobilized molecular catalyst from more than homogeneous measurements alone.