苯丙氨酸衍生物分子印迹聚合物的制备及手性拆分研究

以分子印迹技术合成分子印迹聚合物，作为手性色谱柱的固定相来拆分苯丙氨酸衍生物的对映异构体。采用了新型的交联剂及光引发剂。模板分子和可聚合的功能单体形成配合物是分子印迹聚合物必不可少的条件。模板分子与功能单体的比例为1:4时，获得了良好的分离效果，分离因子α为1.69。光聚合方式合成的分子印迹聚合物比热聚合方式合成的拆分能力要高。且聚合的温度越低，聚合物分离效果越好。     

莱克多巴胺-印迹聚合物微球的制备及其色谱表征

以莱克多巴胺为模板分子,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,乙醇为致孔剂采用沉淀聚合法合成了对莱克多巴胺具有高特异识别性的分子印迹聚合物,平衡吸附量达145.6μg/g微球。将制备的印迹聚合物微球装填高效液相色谱柱(50 mm×4.6 mm i.d.)。印迹柱的印迹因子(IF)为1.2,印迹柱和非印迹柱的保留因子(k)分别为33.3和15.1,表明合成聚合物印迹效果明显。分别用10μg/mL克伦特罗、沙丁胺醇和莱克多巴胺3种β-兴奋剂溶液考察自制高效液相色谱柱的分离效果,克伦特罗和沙丁胺醇的选择性系数(α)分别为2.3和1.2,表明所制备的分子印迹柱对以上3种β-兴奋剂显示了良好的选择性。     

反相气相色谱研究金属离子中介甲醛印迹聚合物的气相识别

采用配位聚合法制备了Co2+中介的甲醛印迹聚合物,用红外光谱和扫描电镜研究了分子印迹聚合物的表面结构。以甲醛印迹聚合物作为气相色谱固定相,采用反相气相色谱技术研究了印迹材料对模板及其结构相似物的选择保留性能、等温吸附及吸附热力学,并探讨了分子印迹聚合物对室内空气中甲醛的脱除效果。结果表明,在相同色谱条件下,分子印迹柱对模板分子的容量因子均远高于乙醛。较低柱温和较低载气流速有利于印迹材料对气态模板分子的选择保留,当柱温为90℃,载气流速7.0 mL/min,进样体积为3.0μL时,分子印迹柱对模板的容量因子高达61.1,对模板及结构类似物的分离因子达到10.66。模板分子在印迹聚合物柱上的气相吸附等温线呈近似线性,而结构类似物乙醛的吸附等温线符合BET吸附的Ⅲ类模型。分子印迹聚合物对室内空气中的甲醛也具有一定的脱除能力。     

电色谱模式下四肽印迹整体柱分子识别机理的研究

本文采用原位聚合法制备了以四肽YPLG为模板的毛细管分子印迹整体柱,在毛细管电色谱模式下以模板分子和它的结构类似物YPGL为样品,对分子印迹聚合物的识别机理进行了研究。这两种四肽由于化学结构相似且等电点非常相近,普通的电色谱和毛细管电泳方法分离非常困难。但我们的实验表明,印迹整体柱对模板分子具有特异性识别能力,因此YPLG与YPGL之间的分离因子为1.73,分离度达3.72。实验中系统地研究了流动相中有机溶剂的含量、缓冲溶液的pH值、缓冲溶液的盐浓度以及柱温对四肽识别的影响。实验中我们观察到模板在印迹柱上具有非线性的Van’t Hoff行为,揭示可能存在多重保留机理。本研究结果表明,在毛细管电色谱模式下,分子印迹整体柱的分子识别主要决定于样品与印迹聚合物之间的氢键作用以及印迹孔穴的三维结构。     

分子印迹液相色谱整体柱

分子印迹是合成预定选择性固定相的新兴技术,整体柱是新型的色谱固定相技术。将分子印迹聚合物与整体柱技术相结合,可以有效提高液相色谱的分离效率,有助于推动整个分离科学的发展,意义重大,是当今分析化学的研究热点。本文就分子印迹液相色谱整体柱的制备合成、色谱分离条件以及物理化学特性评价方法等方面的研究进展进行了较系统的综述,并对该技术目前存在的问题和发展前景进行了探讨。     

二苯甲酰-D-酒石酸分子印迹整体柱的制备及其色谱性能

采用紫外光谱法选择丙烯酰胺为功能单体,以二苯甲酰-D-酒石酸(D-DBTA)为模板分子,丙烯酰胺为功能单体,二甲基丙烯酸乙二醇酯为交联剂,甲苯和十二醇为混合致孔剂,用原位分子印迹技术,合成了D-DBTA分子印迹整体聚合物。在优化色谱条件的基础上,25min内基本实现了DBTA消旋体的手性分离,分离度达1.25。对色谱分离过程中的热力学进行分析,在所考察的温度范围内,色谱分离存在两种不同的热力学过程,且两者与范特霍夫方程能够很好地吻合。在这两种热力学过程的转换温度处,分离因子α达最大值。     

绿原酸印迹均匀微球的制备及其色谱行为研究

以绿原酸为模板,甲基丙烯酸为功能单体,二乙烯基苯为交联剂,采用沉淀聚合法制备了绿原酸印迹均匀微球。探讨了模板及功能单体类型和用量对聚合物颗粒均匀性的影响,考察了流动相组成及柱温对分子印迹柱色谱保留和选择性的影响。绿原酸均匀印迹微球的制备条件为：模板-功能单体-交联剂的用量比为0.375:1.5:7.0,摇瓶转速为15r/min时,微球直径约2.5μm,聚合物收率为35.4%。流动相组成及含水量对印迹聚合物的保留行为影响较大,当用乙腈-水混合物为流动相时,含水量增加,各化合物在印迹色谱柱上的容量因子降低：当流动相含水量高于2.5%,分子印迹聚合物失去选择识别能力;但以0.002mol L_-1磷酸缓冲液(pH3.0)-乙腈混合液为流动相时,分子印迹柱对模板的容量因子、选择性及色谱峰形都有较大改进。当二者体积比为19:1,容量因子高达90.69,其选择性相对于没食子酸和原儿茶酸高达23.10和6.562。温度影响分子印迹聚合物的选择保留能力,当温度从25℃提高到45℃时,印迹聚合物对模板的容量因子从3.52降低到2.41,选择因子降低约30%。     

分子印迹技术在毛细管电色谱中的应用

分子印迹技术是制备具有分子识别功能聚合物，即分子印迹聚合物（MIPs)的一种新技术；毛细管电色谱（CEC）是一个具有发展前途的色谱新技术。将分子印迹技术和毛细管电色谱两种新技术相结合，优势互补，具有极大的发展潜力。本文对分子印迹技术在毛细管电色谱中的应用，以及各类MIPs-CEC毛细管柱的制备方法进行了较为全面的综述，引用文献52篇。     

4-氨基吡啶印迹聚合物毛细管整体柱的电色谱识别机理

在石英毛细管中原位聚合制备了4-氨基吡啶印迹聚合物毛细管整体柱，通过考察流动相中乙腈比例对4-氨基吡啶、2-氨基吡啶和硫脲在分子印迹聚合物毛细管整体柱、空白聚合物毛细管整体柱和硅烷化衍生的开管柱上迁移时间和分离情况的影响，研究了4-氨基吡啶分子印迹聚合物毛细管整体柱的CEC识别机理。发现有机添加剂的含量对印迹聚合物的印迹识别能力影响很大，甚至能改变混合物的流出顺序。根据随乙腈含量改变混合物迁移时间和流出顺序的变化规律，可以推测：随着乙腈含量的提高，色谱保留对迁移的影响越来越大；随着乙腈含量的降低，电泳对迁移的影响越来越大。     

分子印迹整体柱在高校液相色谱和电色谱手性分离中的应用

在常规不锈钢色谱管中以甲基丙烯酸为功能单体,采用原位聚合法制备了(5S,11S)-特罗格尔碱(S-TB)的印迹整体柱.考察了流动相中添加不同量的醋酸和水对分离的影响,结合台阶梯度洗脱模式在S-TB整体柱上实现了对TB消旋体的快速分离.另外,以碱性单体2-二甲基乙基胺甲基丙烯酸酯(DAMA)为功能单体,在毛细管中采用原位聚合法制备了毛细管分子印迹整体柱,用于在毛细管电色谱(CEC)中对消旋体1,1'-联-2-萘酚(BNL)进行手性分离.结果表明,以DAMA为功能单体可以制备其他酸性模板的分子印迹聚合物,从而扩大了分子印迹聚合物(MIP)在CEC分离中的应用范围.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.