超顺磁性Fe3O4/Au@Ag复合材料的合成及其SERS性能研究

利用溶剂热法和种子生长法分别合成Fe₃O₄磁性纳米粒子和Au@Ag核壳纳米粒子, 利用静电吸附方法成功将聚乙酰亚胺(PEI)修饰到Fe₃O₄表面并通过N-Ag共价键将Au@Ag核壳纳米粒子组装到Fe₃O₄表面, 制备Fe₃O₄/Au@Ag复合材料. 通过控制Au@Ag复合粒子的加入量, 来调节Fe₃O₄/Au@Ag复合材料的表面增强拉曼(SERS)活性. 以对巯基苯胺(p-ATP)为拉曼活性探针分子来考察该复合纳米材料的SERS性能, 检测限可以低至2×10^-9 mol/L. 同时, 将该复合材料应用于农药分子福美双的检测, 检测限可以低至10^-6 mol/L. 这种功能性复合材料既具有良好的SERS活性, 又具有Fe₃O₄磁性内核, 可以通过外加磁场实现对待测分子的分离、富集, 具有更广泛的应用前景.     

磁性Fe3O4纳米粒子的功能化修饰研究进展

Fe₃O₄纳米粒子因其独特的磁学性能和良好的生物相容性,在生物医药、催化剂、环境治理等领域具有良好的应用前景。然而,磁性Fe₃O₄纳米粒子易团聚、在潮湿的空气中易氧化,制约了Fe₃O₄纳米粒子的深度应用。本文结合课题组在磁性Fe₃O₄纳米粒子应用方面的研究成果,综述了磁性Fe₃O₄纳米粒子的功能化修饰,并讨论了磁性Fe₃O₄复合纳米材料发展面临的机遇和挑战。      

磁性二氧化硅复合纳米粒子的合成及其与青铜器的相互作用研究

采用反相微乳液法, 合成了以PVP分散的磁性Fe₃O₄纳米粒子为核、SiO₂为壳并复合有荧光标记物钌联吡啶的核壳型复合功能纳米粒子. 在对该功能型二氧化硅复合纳米粒子进行TEM、荧光特性和磁性等特性表征的基础上, 重点研究了水溶性高聚物PVP溶液对Fe₃O₄纳米粒子的分散性, 并将其均匀的包入SiO₂壳中, 基于此研究了该功能型二氧化硅复合纳米粒子与青铜器之间的相互作用、以功能型复合纳米粒子为材料对青铜器腐蚀机理进行了在线、无损、实时监测以及将复合纳米材料从被分析体系中无损去除的方法, 发展了适合于去除吸附于青铜器文物表面的功能型纳米粒子的新方法. 这一研究结果为以该纳米粒子为基质构建适合于青铜器表面成分分析的纳米传感器奠定了基础.     

Fe3O4@Au核-壳纳米复合材料的制备及对农药福美双的SERS检测研究

首先采用热分解法制备了Fe₃O₄纳米材料, 再将其作为磁性核, 分别采用种子沉积法和种子介导生长法制备了Fe₃O₄-Au核-卫星纳米复合材料和Fe₃O₄@Au核-壳纳米复合材料, 并对其形貌和性能进行了表征分析. 结果表明, 所制备的Fe₃O₄-Au核-卫星和Fe₃O₄@Au核-壳纳米复合材料粒径均匀, Au纳米颗粒均匀沉积/包覆在Fe₃O₄纳米材料表面, 且样品均具有良好的磁响应性. 使用4-氨基苯硫酚(4-ATP)作为拉曼探针分子, 对比了这两种纳米复合材料作为SERS基底时的拉曼信号增强效果. 结果显示, Fe₃O₄@Au核-壳纳米复合材料是更优秀的SERS基底, 且该SERS基底具有良好的信号再现性. 最后, 使用Fe₃O₄@Au核-壳纳米复合材料作为SERS基底, 成功地在苹果皮上检测出残留福美双的SERS信号.     

基于表面修饰聚丙烯酸合成超顺磁/荧光纳米复合粒子

在聚丙烯酸修饰的Fe₃O₄纳米粒子表面共价结合罗丹明B, 获得分散性和荧光信号均得到改善的超顺磁/荧光复合纳米材料. 分别用透射电子显微镜(TEM)、傅里叶变换红外光谱仪(FTIR)、热重分析仪、荧光光谱仪、X射线衍射仪(XRD) 和振动样品磁强计(VSM) 对合成的粒子进行了表征. 结果表明, 羧基化的Fe₃O₄纳米粒子和Fe₃O₄-荧光纳米复合材料的粒径基本相同, 为6～10 nm. Fe₃O₄-荧光纳米复合材料的饱和磁化强度为39.2 A•m²/kg, 室温下呈现超顺磁性, 具有较强的荧光信号.     

超顺磁性Fe3O4纳米粒子在磁共振造影中的应用

超顺磁性Fe₃O₄纳米粒子由于其廉价、低毒及超顺磁等特性,已成为重要的一类磁共振造影剂.本文综述了超顺磁性Fe₃O₄纳米粒子的可控制备方法,归纳总结影响粒径、结晶度和磁性能的主要因素和影响规律;为进一步提高磁性能并实现多功能,总结了Fe₃O₄纳米粒子进一步组装和表面改性的方法和机理;系统讨论了Fe₃O₄纳米粒子的形貌、尺寸和表面性能等对磁性能和生物相容性的影响规律;并指出了Fe₃O₄纳米粒子在磁共振造影领域潜在的发展方向和研究热点.     

羧甲基纤维素/Fe3O4复合纳米磁性材料的制备、表征及吸附性能的研究

采用改进的氧化沉淀法在羧甲基纤维素(CMC)体系中制备了以磁性纳米Fe₃O₄为核心, 外层包覆羧甲基纤维素的复合磁性纳米材料. 用透射电镜、X射线衍射、红外光谱、Zeta电位和震动样品磁强计对复合纳米Fe₃O₄进行了表面形貌、结构和磁学的表征. 在此基础上研究了复合纳米Fe₃O₄对Cu^2＋的吸附性能, 探讨了溶液pH、反应时间和 Cu^2＋的初始浓度对其吸附性能的影响. 实验结果表明, 复合Fe₃O₄粒子为反尖晶石型, 平均粒径在40 nm左右, 羧甲基纤维素在Fe₃O₄粒子表面是化学吸附, 复合Fe₃O₄粒子的饱和磁化强度为36.74 emu/g, 在中性溶液中Cu^2＋的吸附量最高, 吸附平衡时间为1.5 h, 二级动力学模型能够很好地拟合吸附动力学数据, 吸附等温数据符合Langmuir模型. 复合纳米Fe₃O₄对Cu^2＋的吸附机理主要为表面配位反应.     

表面分子印迹磁性纳米粒子的制备及其血红蛋白传感应用

以Fe₃O₄磁性纳米粒子为载体、多巴胺（DA）为功能单体、血红蛋白（Hb）为模板分子,用氯铂酸氧化DA生成聚多巴胺（PDA）,同时氯铂酸还原为铂纳米粒子（PtNPs）,与Hb一起负载于Fe₃O₄纳米粒子表面,洗脱Hb后合成了表面分子印迹磁性纳米粒子（印迹Fe₃O₄/PDA-PtNPs）. 将印迹Fe₃O₄/PDA-PtNPs修饰于磁性玻碳基底表面,制得印迹Fe₃O₄/PDA-PtNPs修饰电极. 实验结果表明,印迹Fe₃O₄/PDA-PtNPs具有良好的水溶性,粒径分布均匀,生成的PtNPs具有良好的导电性和刚性. 用印迹Fe₃O₄/PDA-PtNPs构建的传感器对Hb具有良好的识别性,在0.14 ~ 2.7 μg·mL^-1 Hb浓度范围与交流阻抗变化值呈良好的线性关系,检出限（S/N=3）为0.05 μg·mL^-1.     

用于磁性靶向治疗肺纤维化的聚多巴胺包覆的Fe3O4/甲强龙/环磷酰胺复合超粒子

肺纤维化是一种致命性肺部疾病, 目前临床常规的甲强龙(MPS)联合环磷酰胺(CTX)治疗方法存在明显的不良反应. 基于降低药物毒副作用的目的, 本文设计了一种聚多巴胺(PDA)包覆的Fe₃O₄纳米粒子/甲强龙/环磷酰胺复合超粒子(Fe₃O₄/MPS/CTX@PDA SPs), 提出磁性靶向治疗肺纤维化的思路. 从预制的油溶性Fe₃O₄纳米粒子出发, 通过水包油微乳液模板法制备了Fe₃O₄ 超粒子(SPs), 并在进一步包覆PDA壳层的过程中引入MPS和CTX, 制备了Fe₃O₄/MPS/CTX@PDA SPs, 考察了Fe₃O₄/MPS/CTX@PDA SPs的稳定性、 磁性、 对MPS和CTX的负载及释放, 分析了其生物毒性, 并建立动物模型验证了其磁性靶向功能.     

磁性荧光双功能复合纳米粒子Fe3O4@SiO2@ZrO2:Tb3+的合成和表征

通过原位反应合成法成功合成了一种新型水溶性的磁性荧光复合纳米粒子Fe₃O₄@SiO₂@ZrO₂:Tb³⁺,并通过扫描电子显微镜(SEM)、X射线粉末衍射仪(XRD)、红外光谱仪(FT-IR)、磁性测试仪和荧光(PL)光谱对其形貌、尺寸、相组成、磁性和荧光性能进行了表征。 结果表明,核(Fe₃O₄@SiO₂)壳(ZrO₂:Tb³⁺)结构组成的磁性荧光复合纳米粒子具有超顺磁性,其饱和磁化强度达到36 emu/g,并且在494 nm(⁵D₄→⁷F₆)、549 nm(⁵D₄→⁷F₅)、587 nm(⁵D₄→⁷F₄)和625 nm(⁵D₄→⁷F₃)处具有4个Tb³⁺特有的荧光发射光谱带峰值。 磁性荧光双功能的复合纳米粒子在生物医学领域具有潜在的应用价值。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.