导电聚苯胺与磁性γ-Fe2O3纳米复合物的电磁性能

将无机磁性纳米粒子与导电高分子进行化学复合方面的研究已引起了人们的关注[1,2]. 由于该复合材料同时具有有机和无机材料的优异性能, 因而展示了巨大的应用潜力, 特别是在光、电和磁等领域的潜在应用前景更引起了各国研究者的高度重视[3～7].     

纳米Hg2Cl2/Al2O3有序阵列体系的制备和表征

纳米结构材料由于其独特的物理化学性质以及在微电子器件、光开关等方面的应用而备受关注. 多孔氧化铝由于具有孔径分布较窄、取向一致和孔密度高等优点而广泛用于模板制备纳米结构材料. 在多孔氧化铝中可以组装金属纳米粒子[1]、半导体纳米粒子[2]、导电高分子[3]以及碳纳米管[4]等.     

在线性或交联的聚氨酯粒子内原位还原制备纳米银粒子

纳米金属粒子有特异性质 ,可用作高效催化剂、非线性光学材料等 .为防止其聚集 ,不少研究者采用表面活性剂 [1]、配位体 [2 ]和高分子等以阻止纳米金属粒子的聚集 .近年来高分子金属复合纳米粒子引起人们广泛的兴趣 [3～ 9] .文献上大多采用线性或嵌段双亲高分子作纳米金属的分散稳定剂[6 ] 或在高分子粒子表面沉积纳米金属粒子[5] ,也有人采用多孔交联高分子微球的孔洞作为微反应器形成纳米金属粒子[7] .这些方法均不能有效地控制金属粒子的粒径 ,特别难以合成粒径小于 3 0 nm的银粒子 .本文首次报道了在常温处于粘弹态 ,线性或交联的高分…     

银纳米修饰电极的制备及电化学行为

金属纳米粒子由于其小的体积和大的比表面积而具有独特的电子、光学和异相催化特性,是目前表面纳米工程及功能化纳米结构制备的一种理想研究对象[1]。银纳米粒子可广泛应用于催化剂材料、电池的电极材料、低温导热材料和导电材料等,成为近年来人们研究的热点[2,3]。在电化学方面,银纳米粒子具有比其他纳米粒子更为优异的导电性能和电催化性能。因此,研究银纳米粒子修饰电极有重要的应用价值和前景[4]。1实验部分1.1仪器CHI660电化学工作站(USA);TU-1901型双光束紫外可见分光光度计(北京普析通用仪器公司);KQ-100型超声清洗器(昆山市超声…     

TiO2纳米微粒对聚苯胺性能的影响

纳米微粒具有量子尺寸效应, 其光、电、声及磁等方面的性能与常规材料有显著的不同, 其中以TiO2纳米微粒的电荷载体、光电活性中心、光学微腔和光电特性等特征[1,2]尤为引人注目. 导电聚合物的纳米复合材料是纳米材料的研究热点之一, 在导电材料、电流体和高密度信息存储材料等方面具有良好的应用前景[3]. 在导电聚合物中, 聚苯胺(PANI)因其具有较高的电导率, 原料便宜, 稳定性好而成为目前最有希望获得实际应用的导电聚合物[4～6]. 将纳米微粒和PANI制成复合材料, 其光电性能等与PANI相比均有所改变. 目前已相继有PANI-ZrO2, PANI-MnO2, PANI-SiO2纳米复合材料的报道[7,8], 而有关PANI-TiO2研究工作尚少见报道. 本文制备了PANI-TiO2纳米复合材料, 通过红外光谱、紫外可见光谱及透射电镜等探讨了复合材料的微结构及性能.     

聚苯胺嵌入氧化石墨复合物的合成及表征

近年来,聚苯胺类导电高分子嵌入无机片层化合物的报道日趋增加.这些材料中,由于无机/有机的纳米复合,一方面使无机材料的传输性能,如导电性等有极大改善,同时也使该类材料的电化学性能有极大的提高.因此对这类纳米复合材料的研究越来越为广大科研工作者所重视[1～8].作为一种二维的层状化合物,氧化石墨层间大量极性基团的存在虽然赋予了氧化石墨丰富的嵌入化学(Ｉｎｔｅｒｃａｌａｔｅｃｈｅｍｉｓｔｒｙ)[7～11],但在一定程度上也破坏了原石墨的晶体结构,致使其导电率大大降低(接近非导体).因此,如何以常用的纳米复合技术实现氧化石墨(ＧＯ…     

高分子单链的研究进展

随着纳米科技在高分子领域的不断升温,高分子单链凝聚态的研究引起了人们的广泛重视。高分子单链以纳米尺度的微粒孤立存在,不存在分子链之间的几何缠结。本文综述了近年来国内外高分子单链的研究进展。首先介绍了高分子单链的主要制备方法如喷雾法、冷冻干燥法、微乳液聚合法、反向沉淀法以及表面扩展膜法,接着详细介绍了高分子单链的表征技术及高分子链构象的计算机模拟技术,最后介绍了高分子单链及单分子胶束在制备金属纳米粒子领域的应用,并展望了高分子单链的研究领域和方向。     

利用胶体碳球为模板制备SiO2、TiO2、SnO2空心球

介观尺度的氧化物空心球材料在许多领域都有着潜在的应用价值[1],因此近年来受到人们的广泛关注。其制备方法包括:模板法[2],声化学法[3],水热法[4]等。其中胶体粒子模板合成是制备氧化物空心球材料的一条最为有效的途径。常见的胶体粒子有金、银、CdS的纳米粒子,介观尺度的SiO     

导电高分子纳米复合材料

导电高分子纳米复合材料是纳米材料研究中一个重要部分。着重综述了导电高分子无机纳米复合材料在合成技术、材料性质和各领域中应用的最新研究进展。     

用“超分子板块构筑法”制备有机/无机组装体发光材料

一般说来,高分子材料可以由小分子单体通过化学键结合而成[1],也可以通过非化学键的所谓超分子组装而成[2～4].后者是近年来高分子合成中十分活跃的领域.我们尝试将上述两种方法相结合来设计合成高分子功能材料,利用超分子化学法在设计功能性基团方面的便利性[2,5]和经典化学法在成键方面的有效性,提出了用"超分子结构单元"构筑高分子的方法.     

聚苯胺/贵金属复合纳米材料的可控合成及催化应用

导电高分子/贵金属复合纳米材料因其在催化、传感、表面增强拉曼、光热治疗等诸多领域的应用前景而受到广泛关注.本文主要介绍我们课题组近年来利用可控合成策略制备的负载型和包埋型两种结构聚苯胺/贵金属复合纳米材料,以及利用复合纳米材料的结构和功能特性,对其在多相催化领域的应用、结构与催化性能之间构效关系的探索.     

铂纳米粒子和锰卟啉修饰的聚苯胺新材料的制备及表征

借助循环伏安电化学聚合制备了聚苯胺(PANi)/MnT1239卟啉复合材料,再利用还原恒电位沉积法负载铂纳米粒子(Pt NP),最终制备了聚苯胺/MnT1239卟啉/铂纳米粒子复合材料.电沉积铂之后聚苯胺/MnT1239卟啉材料发生明显样貌变化,棒状结构平均直径从90 nm增加到200 nm,材料具有较大的表面积,空间可负载性好.铂纳米粒子平均尺寸在20 nm,附着均匀,氧化峰电流在0.2 V处达到7.4 mA,电化学性能优良.     

Electrochemistry of conductive polymers 39. Contacts between conducting polymers and noble metal nanoparticles studied by current-sensing atomic force microscopy

Electrical properties of contacts formed between conducting polymers and noble metal nanoparticles have been examined using current-sensing atomic force microscopy (CS-AFM). Contacts formed between electrochemically prepared pi-conjugated polymer films such as polypyrrole (PPy), poly(3-methylthiophene) (P3MeT), as well as poly(3,4-ethylenedioxythiophene) (PEDOT) and noble metal nanoparticles including platinum (Pt), gold (Au), and silver (Ag) have been examined. The Pt nanoparticles were electrochemically deposited on a pre-coated PPy film surface by reducing a platinum precursor (PtCl62-) at a constant potential. Both current and scanning electron microscopic images of the film showed the presence of Pt islands. The Au and Ag nanoparticles were dispersed on the P3MeT and PEDOT film surfaces simply by dipping the polymer films into colloid solutions containing Au or Ag particles for specified periods (5 to approximately 10 min). The deposition of Au or Ag particles resulted from either their physical adsorption or chemical bonding between particles and the polymer surface depending on the polymer. When compared with PPy, P3MeT and PEDOT showed a stronger binding to Au or Ag nanoparticles when dipped in their colloidal solutions for the same period. This indicates that Au and Ag particles are predominantly linked with the sulfur atoms via chemical bonding. Of the two, PEDOT was more conductive at the sites where the particles are connected to the polymer. It appears that PEDOT has better aligned sulfur atoms on the surface and is strongly bonded to Au and Ag nanoparticles due to their strong affinity to gold and silver. The current-voltage curves obtained at the metal islands demonstrate that the contacts between these metal islands and polymers are ohmic.     

Electrochemical fabrication of two-dimensional palladium nanostructures as substrates for surface enhanced Raman scattering

Two-dimensional palladium (Pd) nanostructures have been fabricated by electrochemical deposition of Pd onto an indium tin oxide glass substrate modified with a thin flat film of polypyrrole or a nanofibril film of polyaniline. The experimental results demonstrated that the morphology of Pd nanoparticles strongly depended on the properties of conducting polymers and the conditions of electrochemical deposition. Two-dimensional nanostructures composed of flower-like (consisting of staggered nanosheets) or pinecone-like Pd nanoparticles were successfully synthesized. They can be used as substrates for surface-enhanced Raman scattering after partly decomposing the polymer components by heating in air, and the enhancement factor of the substrate composed of flower-like Pd nanoparticles was measured to be as high as 105 for 4-mercaptopyridine.     

Preparation of airborne Ag/CNT hybrid nanoparticles using an aerosol process and their application to antimicrobial air filtration

Carbon nanotubes (CNTs) have been widely used in a variety of applications because of their unique structure and excellent mechanical and electrical properties. Additionally, silver (Ag) nanoparticles exhibit broad-spectrum biocidal activity toward many different bacteria, fungi, and viruses. In this study, we prepared Ag-coated CNT hybrid nanoparticles (Ag/CNTs) using aerosol nebulization and thermal evaporation/condensation processes and tested their usefulness for antimicrobial air filtration. Droplets were generated from a CNT suspension using a six-jet collison nebulizer, passed through a diffusion dryer to remove moisture, and entered a thermal tube furnace where silver nanoparticles were generated by thermal evaporation/condensation at ～980 °C in a nitrogen atmosphere. The CNT and Ag nanoparticle aerosols mixed together and attached to each other, forming Ag/CNTs. For physicochemical characterization, the Ag/CNTs were introduced into a scanning mobility particle sizer (SMPS) for size distribution measurements and were sampled by the nanoparticle sampler for morphological and elemental analyses. For antimicrobial air filtration applications, the airborne Ag/CNT particles generated were deposited continuously onto an air filter medium. Physical characteristics (fiber morphology, pressure drop, and filtration efficiency) and biological characteristics (antimicrobial tests against Staphylococcus epidermidis and Escherichia coli bioaerosols) were evaluated. Real-time SMPS and transmission electron microscopy (TEM) data showed that Ag nanoparticles that were <20 nm in diameter were homogeneously dispersed and adhered strongly to the CNT surfaces. Because of the attachment of Ag nanoparticles onto the CNT surfaces, the total particle surface area concentration measured by a nanoparticle surface area monitor (NSAM) was lower than the summation of each Ag nanoparticle and CNT generated. When Ag/CNTs were deposited on the surface of an air filter medium, the antimicrobial activity against test bacterial bioaerosols was enhanced, compared with the deposition of CNTs or Ag nanoparticles alone, whereas the filter pressure drop and bioaerosol filtration efficiency were similar to those of CNT deposition only. At a residence time of 2 h, the relative microbial viabilities of gram-positive S. epidermidis were ～32, 13, 5, and 0.9% on the control, CNT-, Ag nanoparticle-, and Ag/CNT-deposited filters, respectively, and those of gram-negative E. coli were 13, 2.1, 0.4, and 0.1% on the control, CNTs, Ag nanoparticles, and Ag/CNTs, respectively. These Ag/CNT hybrid nanoparticles may be useful for applications in biomedical devices and antibacterial control systems.     

Excitation Energy Transfer from Semi‐Conducting Polymer Nanoparticles to Surface‐Bound Fluorescent Dyes

Summary: The first examples of the dye‐coated semi‐conducting polymer nanoparticles as well as experiments to demonstrate the excitation energy transfer from the excited chromophor of the nanoparticle to the fluorescent dye are described. We have demonstrated that the blue fluorescence of the dye‐coated polyfluorene nanoparticles is only slightly quenched after dye deposition. However, a new emission band of the surface‐bound dye (Rhodamine 6G or Rhodamine TM) appears in the wavelength region of 530–600 nm. These results clearly indicate an effective excitation energy transfer from the excited PF chromophores to the fluorescent dye.

Emission spectra of PF2/6 nanoparticle dispersion and of Rhodamine 6G‐coated nanoparticle dispersion.     

Preparation of size-controlled, highly populated, stable, and nearly monodispersed Ag nanoparticles in an organic medium from a simple interfacial redox process using a conducting polymer

The reducing property of an organically soluble conducting polymer (poly(o-methoxyaniline), POMA) is used to prepare monodisperse, size-controlled, highly populated, and highly stable silver nanoparticles in an organic medium through an interfacial redox process with an aqueous AgNO3 solution. The transition of emeraldine base (EB) to the pernigraniline base (PB) form of POMA occurs during nanoparticle formation, and the nitrogen atoms of POMA(PB) stabilize Ag nanoparticles by coordination to the adsorbed Ag(+) on the nanoparticle surface. The conductivity of the nanocomposite is on the order of 10(-11) S/cm, indicating that no doping of POMA occurs under the preparation conditions. The nanoparticles are free of excess oxidant and external stabilizer particles. The POMA (EB) concentration tailors the size of nanoparticles, and at its higher concentration (0.01% POMA with 0.01 N AgNO3), very dense Ag nanoparticles (6 x 10(15) particles/m(2)) of almost uniform size and shape are produced. The rate constant and Avrami exponent values of the nanoparticle formation are measured from the time-dependent UV-vis spectra using the Avrami equation. The Avrami exponent (n) values are close to 1, indicating 2D athermal nucleation with the circular shape of the nuclei having diffusion-controlled growth. The rate constant values are almost independent of AgNO3 concentration but are strongly dependent on POMA concentration. The higher rate constant with increasing POMA(EB) concentration has been attributed for the lowering of nanoparticle size due to increased nucleation density.     

Au/Ag核一壳结构复合纳米粒子形成机制的研究

在已制备好的Au纳米粒子表面,通过化学还原的方法沉积生长Ag包覆层,通过 控制Au, Ag的比列,制备了粒度均匀且粒径可控的Au/Ag核-壳结构纳米粒子。利用 UV-vis吸收光谱和透射电子显微镜（TEM）对SAu, Ag摩尔比为1：10的复合纳米粒 子的光学性质和形态进行随时监测,直接观察了核-壳结构纳米粒子的生长过程： 一部分Ag+在Au核表面还原生长,溶液中其余Ag+还原形成银的纳米团簇向粒子表面 的继续沉积生长,壳层增厚。     

Effects of Adsorbed Polyaniline on Redox Process on MoO3 Surface

The effects exhibited by adsorbed conducting polyaniline on the redox process on a molybdenum oxide surface were studied. Thermogravimetric results indicate a 4% polyaniline deposition. Cyclic voltammograms of the adsorbed polymer on MoO3 show that polyaniline exerts remarkable effects on the molybdenum blue oxidation-reduction process, with oxidation and reduction potentials of 0.33 and 0.18 V, respectively. This effect strongly enhances the electrode response, and can be used as an important tool in qualitative and/or quantitative determinations of molybdenum in solution as well as in any substrate. Copyright 1999 Academic Press.     

Au-Ag hybrid nanoparticle patterns of tunable size and density on glass and polymeric supports

This paper describes a method to pattern surfaces with Au-Ag hybrid nanoparticles. We used block copolymer micelle lithography of Au nanoparticles and electroless deposition of Ag. The combination of these two methods enables independent tuning of nanoparticle spacing and Ag-shell size. For this purpose, 8 nm large patterned Au nanoparticle seeds served as nuclei for the electroless deposition of silver that is based on a modified Tollens process with glucose. By adjusting the reaction conditions, specific growth of Ag on top of the Au seeds has been accomplished and analyzed by SEM, HRTEM, XEDS, and UV-vis spectroscopy. We could show that this versatile and green method is feasible on glass as well as on biomedical-relevant polymers like poly(ethylene glycol) hydrogels and amorphous Teflon. In conclusion, this method provides a new route to pattern glass and polymeric surfaces with Au-Ag hybrid nanoparticles. It will have many uses in applications such as surface enhanced Raman spectroscopy (SERS) or antimicrobial coatings for which hybrid nanoparticle density, size, and morphology are important.