Modified boron nitride as an efficient synergist to flame retardant natural rubber: preparation and properties

A new flame retardant system with organic modified boron nitride (m‐BN) and intumescent flame retardant (IFR) was used in this paper, and the synergistic flame retardancy of m‐BN and IFR on natural rubber (NR) was studied. NR/IFR/m‐BN composites were characterized by X‐ray photoelectron spectroscopy(XPS), Fourier transform infrared spectrometry (FTIR), thermogravimetric analysis, UL‐94, limiting oxygen index (LOI), tensile testing, cone calorimeter testing, and thermal conductivity testing. When 4 wt% m‐BN was added, the flame retardancy and mechanical properties of the composites were improved. The LOI value of NR/IFR/4 phr m‐BN reached 26.8%, and suppressed fire spread in a UL‐94 test. Compared with pure NR, the peak heat release rate (pHRR) was reduced by 52.2%, the total heat release (THR) was reduced by 27.6%, and CO yields were reduced by 51.4%. As a key aspect of fire safety, the ignition time is effectively delayed to 23 seconds due to the increased thermal conductivity of NR/IFR/m‐BN. Since the synergistic effect of m‐BN effectively improves the flame retardancy of NR, it provides a feasible method for improving the fire safety of polymers.     

Synergistic effect of graphene oxide and boron-nitrogen structure on flame retardancy of natural rubber/IFR composites

In this paper, GO-BN(graphene oxide grafted boron nitride) was synthesized from graphene oxide and boron nitride by silane coupling agent KH550. Furthermore, GO-BN and intumescent flame retardant (IFR) were added into natural rubber (NR) simultaneously to improve its flame retardancy. The structure of GO-BN was studied by Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). The analysis showed that GO-BN was successfully synthesized. The enhanced flame retardancy performance of flame retardant natural rubber (FRNR) was evaluated by limiting oxygen index (LOI) and UL-94 tests. Moreover, the combustion action of FRNR in fire was evaluated by cone calorimetry. Notably, the results showed that the sample with a GO-BN content of 12 phr showed the best flame retardancy performance. The heat release rate (HRR) and total heat release rate (THR) were remarkably decreased by 42.8% and 19.4%, respectively. Carbon residues were analyzed by infrared spectroscopy and scanning electron microscopy, which showed that GO-BN and IFR had a synergistic catalytic effect. The formation of compact thermal stable carbon layer after combustion was the key to protect engineering materials from combustion.     

Preparation and characterization of phenolic foams with eco-friendly halogen-free flame retardant

The high solid resol phenolic resin was prepared via step polymerization of formaldehyde, paraformaldehyde, and phenol using sodium hydroxide and calcium oxide as catalysts, and employed to prepare the phenolic foams (PFs) by the introduction of retardant additives including eco-friendly halogen-free flame retardants (ammonium polyphosphate), char-forming agents (pentaerythritol), and synergists (zinc oxide, molybdenum trioxide, cuprous chloride, and stannous chloride). The effects of these additives on flame retardancy, heat resistance, and fire properties of flame-retardant composite phenolic foams (FRCPFs) were evaluated by limiting oxygen index (LOI) tests, thermogravimetric analyzer, and cone calorimeter tests. It was found that the flame retardan significantly increased the LOIs of FRCPFs. Compared with PF, heat release rate, total heat release, effective heat of combustion, production or yield of carbon monoxide (COP or COY), and Oxygen consumption (O₂C) of FRCPFs all remarkably decreased. However specific extinction area and total smoke release significantly increased, which agreed with the gas-phase mechanism of the flame-retardant system. The results indicate that FRCPFs have excellent fire-retardant performance and less smoke release. APP/PER/ZnO is shown to be better flame-retardant system for PFs.     

一种无卤阻燃ABS体系的阻燃性能研究

ABS是本世纪40年代发展起来的通用型热塑性材料[1],它有良好的力学性能,耐化学腐蚀、易加工等优点[2-6].     

AN EVA/UNMODIFIED NANO-MAGNESIUM HYDROXIDE/SILICONE RUBBER NANOCOMPOSITE WITH SYNERGISTIC FLAME RETARDANCY

A novel EVA/unmodified nano-magnesium hydroxide(NMH)/silicone rubber ternary nanocomposite was prepared by using a special compound flame retardant of NMH and silicone rubber(CFR).The flammability of the ternary composite was studied by cone calorimeter test(CCT).Synergistic effect on flame retardancy was found between silicone rubber and NMH.EVA/CFR ternary nanocomposite showed the lowest peak heat release rate(PHRR)and mass loss rate (MLR)among the samples of virgin EVA,EVA composites.The synergistic flame retardancy of silicone rubber and NMH in EVA system is attributed to the enhanced char layers in the condensed phase that prevents the heat and mass transfer in the fire.     

Effects of thermal-oxidative aging on the flammability and thermal-oxidative degradation kinetics of tris(tribromophenyl) cyanurate flame retardant PA6/LGF composites

The influence of thermal-oxidative aging on the flame retardancy of the flame retardant long-glass-fiber reinforced polyamide 6 composites (FR/PA6/LGF) with different thermal-oxidative exposure times at 160 °C were studied in this work. The flammability and flame-retardant properties of FR/PA6/LGF were investigated by means of the limiting oxygen index (LOI), vertical burning test (UL-94), cone calorimeter test (CONE), and scanning electronic microscopy (SEM), before and after thermal-oxidative aging. The thermal-oxidative stability and degradation kinetics of the unaged and aged composites were studied by thermogravimetric analysis (TGA) with the methods of Kissinger and Ozawa in dynamic measurements (10 °C/min–40 °C/min). The results indicated that the flammability properties mirrored the degradation behaviors of these FR/PA6/LGF composites whatever their forms (aged or not). The Ozawa method showed that the causes of the first peak in the heat release rate change by CONE measurement corresponded to the apparent activation energies of the first stage degradation of aged FR/PA6/LGF composites, and the same conclusion with respect to the other heat release rate peak. Moreover, this aging slightly enhanced the solid phase flame-retardant mechanism by a char-promotion function, but had no effect on the gaseous flame-retardant mechanism and the decrease of harmful gas release rates. The existence of a surface migration effect on the flame retardant would endow FR/PA6/LGF composites with better LOI values, a more protective char layer structure, and excellent UL-94 ratings.     

Synthesis and characterization of expandable graphite-poly(methyl methacrylate) composite particles and their application to flame retardation of rigid polyurethane foams

The expandable graphite (EG) is well proved to be a good intumescent flame retardant for rigid polyurethane foam (RPUF), however, as it is pulverized into fine particles (pEG) for the purpose of improving the mechanical properties of the foam composite, the flame-retardant properties of pEG-filled RPUF (pEG/RPUF) are deteriorated. To improve both the mechanical properties and flame-retardant performance of pEG/RPUF composite, the pEG particles were encapsulated with a layer of polymer, poly(methyl methacrylate) (PMMA). The Fourier transform infrared spectroscopy (FTIR) examination, thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) observation well demonstrated that the pEG-PMMA particles were successfully synthesized via emulsion polymerization, with 22.09 wt% PMMA. In contrast to the pEG, the addition of 10 wt% of pEG-PMMA particles into RPUF led to a considerable increase of the compressive strength and modulus and flame retardancy (limiting oxygen index, horizontal and vertical burning rates). The improvement of mechanical properties and flame-retardant behavior of pEG-PMMA particles filled RPUF was attributed to the desirable dispersion of pEG in PU matrix without destroying the integrality of the RPUF cell system, the good interfacial adhesion between PMMA and RPUF, and sealing the fine EG particles without losing oxidant, hence, to increase their expanded volume as exposed to fire.     

Synthesis of organo-modified α-zirconium phosphate and its effect on the flame retardancy of IFR poly(lactic acid) systems

Novel intumescent flame-retardant poly(lactic acid) (PLA/IFR)/organo-modified α-zirconium phosphate(OZrP) nanocomposites were prepared via incorporation of charring agent (CA), ammonium polyphosphate (APP) and OZrP into PLA. OZrP was synthesized directly by a solvent thermal method. The morphological characterization of PLA/IFR/OZrP nanocomposites was conducted by wide angle X-ray diffraction (WXRD) and transmission electron microscopy (TEM). The effect of the OZrP on flame retardancy and the thermal stability of PLA/IFR composites were studied by thermogravimetric analysis (TGA), limiting oxygen index (LOI), vertical burning test (UL-94) and cone calorimeter test. The TGA data illustrated that the OZrP could increase the residue and significantly improve the flame retardancy of PLA/IFR/OZrP nanocomposites showing an excellent synergistic effect. The addition of OZrP to the flame-retardant PLA increases the LOI and enhances the UL-94 rating. Cone calorimeter tests gave clear evidence that the incorporation of OZrP into PLA/IFR composites resulted in the significant reduction of the heat release rate (HRR), low total heat release (THR) and high amount of char residues during combustion. The flame-retardant mechanism of PLA/IFR/OZrP nanocomposites may correspond to the intumescent flame-retardant mechanism and catalyzed carbonization mechanism caused by OZrP.     

An efficiently halogen-free flame-retardant long-glass-fiber-reinforced polypropylene system

In order to solve the “candlewick effect” caused by glass fibers, which results in the decrease of flame retardancy of flame-retardant long-glass-fiber-reinforced polypropylene (LGFPP) systems, and the deterioration of mechanical properties caused by adding an additional amount of flame retardants compared with flame-retardant non-glass-fiber-reinforced polypropylene systems so as to keep a same flame retardancy, a novel intumescent flame retardant (IFR) system, which is composed of a charring agent (CA), ammonium polyphosphate (APP) and organically-modified montmorillonite (OMMT), was used to flame retard LGFPP. The thermal stability, combustion behavior, char formation, flame retardant mechanism and mechanical properties of the IFR-LGFPP samples were investigated by thermogravimetric analysis (TGA), limiting oxygen index (LOI), UL-94 test, cone calorimeter test, scanning electronic microscopy, and mechanical property tests. When the content of IFR is 20 wt%, the LOI value of IFR-LGFPP reaches 31.3, and the vertical burning test reaches UL-94 V-0 rating, solving the “candlewick effect” caused by long glass fiber without additional amount of the IFR. All the relevant cone calorimeter parameters also show that IFR-LGFPP has much better flame-retardant behaviors than LGFPP. Furthermore, the mechanical properties of IFR-LGFPP almost remain unchanged in comparison with those of LGFPP containing no IFR. The flame retardant mechanism was also discussed.     

Preparation of gel‐silica/ammonium polyphosphate core‐shell flame retardant and properties of polyurethane composites

A novel intumescent gel‐silica/ammonium polyphosphate core‐shell flame retardant (MCAPP), which contains silicon, phosphorus, and nitrogen, has been prepared by in situ polymerization. The structure of MCAPP was characterized by Fourier transform infrared (FTIR) and X‐ray photoelectron spectroscopy (XPS). The properties of MCAPP were investigated by water solubility, hydrophilicity, and morphological determination. The flame retardancy and thermal stability of polyurethane (PU) composite with MCAPP were evaluated by limiting oxygen index (LOI), UL‐94 test, cone calorimetry, and thermogravimetric analysis (TGA). The results showed that MCAPP could decrease the heat release rate (HRR) and increase the thermal stability of PU materials greatly. Finally, water‐resistant properties of PU/FR composites were also studied. Copyright © 2010 John Wiley & Sons, Ltd.     

A biobased flame retardant towards improvement of flame retardancy and mechanical property of ethylene vinyl acetate

A new biobased flame retardant (MHPA) with remarkable compatibility was synthesized via a facile and low-cost neutralization reaction of magnesium hydroxide (MH) and phytic acid (PA). By blending the prepared MHPA into ethylene vinyl acetate (EVA), the fire retardancy, smoke suppression and mechanical properties of the composites were significantly improved. When 50 wt% of MH was added into EVA matrix, the value of limiting oxygen index (LOI) reached 26.1%. Whereas, when 10 wt% MH in the EVA composites (with initial 50 wt% MH) was replaced by MHPA, the resulted EVA composites had a LOI value of 30.8%, indicating high efficiency of addition of MHPA to improve flame retardancy. Moreover, the heat release rate (HRR) and total smoke production (TSP) of the EVA composites reduced by 54.4% and 27.6%, respectively, suggesting that incorporation of MHPA could effectively hinder rapid degradation of EVA composites during burning process. The fire-retardant mechanism may reside in that the MHPA combined with MH can present the excellent carbonization and expansion effects. This study illustrates that the biobased MHPA has a broad application prospect to develop flame-retardant EVA composites.     

A vanillin-derived flame retardant based on 2-aminopyrimidine for enhanced flame retardancy and mechanical properties of epoxy resin

In order to give epoxy resin good flame retardance, a novel bio-based flame retardant based on 2-aminopyrimidine (referred to as VAD) was synthesized from renewable vanillin as one of the starting materials. Its structure was confirmed by NMR and mass spectra. The epoxy resins containing VAD were prepared by utilizing 4,4-diaminodiphenylmethane (DDM) as a co-curing agent, and their flame-retardant, mechanical and thermal properties and corresponding mechanisms were studied. VAD accelerated the cross-linking reaction of DDM and E51 (diglycidyl ether of bisphenol A). 12.5 wt% VAD made the epoxy resin achieve UL-94 V-0 rating and its limited oxygen index (LOI) value increase from 22.4% to 32.3%. The cone calorimetric testing results revealed the decline in the values of total heat release (THR) and peak of heat release rate (pk-HRR) and the obvious enhancement of residue yield. A certain amount of VAD enhanced the flame inhibition, charring and barrier effects, resulting in good flame retardance of the epoxy resin. Furthermore, the tensile strength, flexural strength and flexural modulus of the epoxy resin with 12.5 wt% loading of VAD were 6.5%, 14.9%, 15.2% higher than those of EP, indicating the strengthening effect of VAD. This work guarantees VAD to be a promising flame retardant for enhancing the fire retardancy of epoxy resin without compromising its mechanical properties.     

The study of mechanical behavior and flame retardancy of castor oil phosphate-based rigid polyurethane foam composites containing expanded graphite and triethyl phosphate

The goal of this work was the synthesis of novel flame-retarded polyurethane rigid foam with a high percentage of castor oil phosphate flame-retarded polyol (COFPL) derived from renewable castor oil. Rigid flame-retarded polyurethane foams (PUFs) filled with expandable graphite (EG) and diethyl phosphate (TEP) were fabricated by cast molding. Castor oil phosphate flame-retarded polyol was derived by glycerolysis castor oil (GCO), H₂O₂, diethyl phosphate and catalyst via a three-step synthesis. Mechanical property, morphological characterization, limiting oxygen index (LOI) and thermostability analysis of PUFs were assessed by universal tester, scanning electron microscopy (SEM), oxygen index testing apparatus, cone calorimeter and thermogravimetric analysis (TGA). It has been shown that although the content of P element is only about 3%, the fire retardant incorporated in the castor oil molecule chain increased thermal stability and LOI value of polyurethane foam can reach to 24.3% without any other flame retardant. An increase in flame retardant was accompanied by an increase in EG, TEP and the cooperation of the two. Polyurethane foams synthesized from castor oil phosphate flame-retarded polyol showed higher flame retardancy than that synthesized from GCO. The EG, in addition to the castor oil phosphate, provided excellent flame retardancy. This castor oil phosphate flame-retarded polyol with diethyl phosphate as plasticizer avoided foam destroy by EG, thus improving the mechanical properties. The flame retardancy determined with two different flame-retarded systems COFPL/EG and EG/COFPL/TEP flame-retarded systems revealed increased flame retardancy in polyurethane foams, indicating EG/COFPL or EG/COFPL/TEP systems have a synergistic effect as a common flame retardant in castor oil-based PUFs. This EG/COFPL PUF exhibited a large reduction of peak of heat release rate (PHRR) compared to EG/GCO PUF. The SEM results showed that the incorporation of COFPL and EG allowed the formation of a cohesive and dense char layer, which inhibited the transfer of heat and combustible gas and thus increased the thermal stability of PUF. The enhancement in flame retardancy will expand the application range of COFPL-based polyurethane foam materials.     

Thermal and flame retardant properties of novel intumescent flame retardant polypropylene composites

Novel intumescent flame retardant polypropylene (PP) composites were prepared based on a char forming agent (CFA) and silica-gel microencapsulated ammonium polyphosphate (Si-MCAPP). The thermal and flame retardancy of flame retardant PP composites were investigated by limiting oxygen index, UL-94 test, cone calorimetry, thermogravimetric analysis, scanning electron micrograph, and water resistance test. The results of cone calorimetry show that the flame retardant properties of PP with 30 wt% novel intumescent flame retardants (CFA/Si-MCAPP = 1:3) improve greatly. The peak heat release rate and total heat release decrease, respectively, from 1,140.0 to 156.8 kW m^?2 and from 96.0 to 29.5 MJ m^?2. The PP composite with CFA/Si-MCAPP = 1:3 has the excellent water resistance, and it can still obtain a UL-94 V-0 rating after 168 h soaking in water.     

A novel halogen-free flame retardant for glass-fiber-reinforced poly(ethylene terephthalate)

In order to prepare halogen-free flame-retardant glass-fiber-reinforced poly(ethylene terephthalate) (FR-GF-PET), a novel flame retardant containing three flame-retardant elements, P, N and S, was synthesized by melt condensation reaction. Its chemical structure was characterized by FT-IR and ¹H NMR spectra. FR-GF-PET was prepared by melt-mixing the flame retardant with GF-PET. The effects of the flame retardant on the flammability and thermally decomposing behaviors of GF-PET were studied via LOI, UL-94 and TGA tests. The results showed that despite a negative effect on the thermal stability of GF-PET, the incorporation of the flame retardant improved the flame retardancy of GF-PET largely. The LOI values of GF-PET increase linearly with the increase of flame retardant content. The GF-PET passed the V-0 rating in UL-94 tests when 15 wt% of the flame retardant was added to GF-PET. An interesting phenomenon was found, that is, with the increase of flame retardant content, the flame retardancy of the system increased but the char yield decreased, which was explained according to the evidences of XPS tests and the kinetics of thermally decomposing reaction.     

Thermogravimetry as a tool for measuring of fracturing fluid absorption in shales

A series of flame-retardant ethylene–vinyl acetate (EVA) composites with different contents of aluminum phosphate (AHP) and Trimer were prepared. The synergistic flame-retardant effects of the Trimer with AHP in EVA/AHP blends were studied by limiting oxygen index (LOI) tests, UL-94 tests, cone calorimeter tests, thermogravimetric analysis, and scanning electron microscopy (SEM). The LOI and UL-94 results showed that the system containing AHP and Trimer was very effective in improving the flame retardancy of EVA. When the mass ratio of AHP and Trimer was 3:1, the highest flame retardancy could be obtained, and when the flame-retardant loading was 30 wt%, the EVA/AHP/Trimer (7.5%) sample could achieve the V-0 rating in UL-94 tests, at the same time, its LOI value was 24.4%. The TG and DTG results showed that the addition of flame retardants catalyzes EVA decomposition in the first stage and generates a more stable char residue in the second stage. Consequently, an efficient reduction in the flammability parameters, such as heat release rate, total heat release, smoke production rate, and total smoke production could be observed. In addition, it was observed from the SEM observations of the morphological features that the AHP and Trimer combination, at the optimum proportion, could promote the formation of compact charred layers and prevent their cracking, which effectively protected the underlying materials from burning.     

Flame retardant mechanism of an efficient flame-retardant polymeric synergist with ammonium polyphosphate for polypropylene

An efficient flame retardant polymeric synergist poly[N⁴-bis(ethylenediamino)-phenyl phosphonic-N², N⁶-bis(ethylenediamino)-1,3,5-triazine-N-phenyl phosphonate] (PTPA) was designed and synthesized from cyanuric chloride, ethylenediamine and phenylphosphonic dichloride. It was characterized by Fourier Transform Infrared (FTIR), ¹H NMR and ³¹P NMR, Elemental Analysis (EA) and Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES). Combined with ammonium polyphosphate (APP), a new intumescent flame retardant (IFR) was obtained. The flammability behaviors of polypropylene (PP)/IFR system were investigated by limiting oxygen index (LOI), vertical burning test (UL-94) and cone calorimetry. With 25 wt% of IFR (APP:PTPA = 2:1), the PP/IFR system could achieve a LOI value of 34.0% and UL-94 V-0 rating, and the heat release rate (HRR), peak heat release rate (PHRR), total heat release (THR) and smoke production rate (SPR) were considerably reduced, especially HRR and SPR were decreased by 85% and 79%, respectively. The results indicate that there is an excellent synergism between APP and PTPA, which endows PP with both good flame retardancy and good smoke suppression. Furthermore, the thermal degradation mechanism of IFR and the flame-retardant mechanism of PP/IFR system were investigated by thermogravimetric analysis (TGA), FT-IR, TG-FTIR and scanning electron microscope (SEM). The study on the flame-retardant mechanism of IFR indicated that a structure containing –CN was formed due to the reaction between APP and PTPA.     

Preparation and flammability of a novel intumescent flame-retardant poly(ethylene-co-vinyl acetate) system

A phosphorus-containing flame retardant, 4-(5,5-dimethyl-2-oxo-1,3,2-dioxaphosphorinan-2-yloxymethyl)-2,6,7-trioxa-1-phospha-bicyclo[2.2.2]octane-1-oxide (MOPO), was synthesized successfully and characterized. The flame retardancy and thermal behavior of a new intumescent flame-retardant (IFR) system for EVA, which was made of MOPO and ammonium polyphosphate (APP), were investigated by limiting oxygen index (LOI) test, vertical burning test (UL-94), cone calorimeter, and thermogravimetric analysis (TGA). An LOI value of 28.4 and UL-94 V-0 rating can be achieved when the total loading of MOPO and APP was 30 wt.%. The results from cone calorimeter indicate that both the heat release rate (HRR) and the total heat release (THR) of IFR-EVA decreased significantly compared with those of neat EVA. TG curves showed that the amount of residues increased significantly when intumescent additives were added; it also could be found that the LOI values increased with the increase in char residues. Meanwhile, morphology of the residues obtained from burning IFR-EVA in LOI test was studied through the SEM observations and rich compact char layers could explain the excellent flame retardance.     

Cone calorimeter analysis of flame retardant poly (methyl methacrylate)-silica nanocomposites

Nanocomposite is a promising method to reduce fire hazards of polymers. Specifically due to increased interfacial area between polymer and nanofillers, polymer nanocomposites have an advantage in reducing fire hazards efficiently even when the flame retardant additives are at a concentration of 5 mass% or less. In theory, crosslinking between the polymer chains can create a carbon-dense structure to enhance char formation, which can further promote the flame retardancy. However, little research has been done to explore the flammability of crosslinking polymer nanocomposites with a low concentration of nanosilica particles. In this study, crosslinked and non-crosslinked poly (methyl methacrylate) (PMMA) nanocomposites of a low concentration of nanosilica particles have been prepared via an in situ method. Their fire properties were tested by using the cone calorimeter at the heat flux of 50 kW m^?2. Although silica-containing flame retardants tend to negatively affect the ignitability and soot production especially at a high concentration, through the condensed phase mechanism, the samples of high loading rate of nanosilica particles show better fire retardancy performance in the aspect of flammability, including decreased heat release rate, mass loss rate, and total heat release. Additionally, crosslinking indeed attributes to the less intensive combustion of crosslinked PMMA samples, especially at a low concentration of nanosilica. The combination of nanosilica particles with the modification of the internal structure of the polymer nanocomposites might be a good strategy to improve fire retardancy.     

阻燃及可瓷化硅橡胶成炭结构的研究进展

简单介绍了硅橡胶的阻燃和瓷化机理。依据阻燃剂、填料及炭层结构的不同,将硅橡胶分为阻燃和可瓷化两大类.综述了阻燃硅橡胶和可瓷化硅橡胶的阻燃性能和成炭结构的研究进展。分析表明:添加物理或化学膨胀型阻燃剂的硅橡胶,燃烧过程中形成的炭层疏松多孔,阻燃隔热性能优异,但炭层强度差;添加非膨胀型阻燃剂的硅橡胶,炭层结构相对密实,但表面不平整,存在孔洞和裂缝,阻燃效果不好;添加可瓷化填料的硅橡胶燃烧形成的陶瓷炭层坚硬而致密,具有优异的耐火持久性,但在隔绝热量方面不如膨胀炭层。炭层的疏松隔热与坚固耐久兼顾是阻燃硅橡胶未来可能的发展方向。