Preparation and characterization of flame retardant and low smoke releasing oil-resistant EVA/NBR blends

Nano-Si O2 and/or Mo O3 were introduced to ethylene-vinyl acetate/nitrile butadiene rubber(EVA/NBR) blends containing magnesium hydroxide(MH) and red phosphorus(RP) to further improve the mechanical properties, oil resistance, smoke suppression and flame retardancy. The results indicated that the tensile strength and oil resistance were significantly improved by incorporating nano-Si O2. Smoke suppression tests for EVA/NBR blend samples showed that both nano-Si O2 and Mo O3 can significantly reduce smoke release amount. The flammability characterization indicated that the blended sample with an LOI value of 33.0 could achieve V-0 level in the UL-94 test. Cone calorimetry test data showed the peak heat release rate was 67% lower than that for pure EVA/NBR. Thermal analysis showed that the presence of both nano-Si O2 and Mo O3 was beneficial to promoting char formation of the EVA/NBR blends. Char residual analysis suggested that Mo O3 aggregated in solid phase during combustion.     

磷腈类衍生物改性磷酸锆的合成及其复配聚磷酸铵对硅橡胶阻燃性能和力学性能的影响

利用原位插层反应制得磷腈类衍生物修饰的改性磷酸锆(F-ZrP),并用机械共混工艺制得阻燃硅橡胶复合材料(FRSR).采用X射线衍射(XRD)、透射电子显微镜(TEM)、傅立叶红外光谱(FTIR)、热重(TG)、扫描电子显微镜(SEM)分别对磷酸锆的结构及其在硅橡胶基体的分散进行表征,并结合FRSR的垂直燃烧(UL-94)、极限氧指数(LOI)、锥形量热测试及残渣表面形貌的观察,研究了不同份数的F-ZrP复配聚磷酸铵对FRSR阻燃性能的影响并和添加未改性磷酸锆的样品性能对比,并对阻燃机理进行初步探讨;最后分析FRSR的力学性能.结果表明:F-ZrP拥有更大的层间距,而且在FRSR中分散的更好;当1 phr F-ZrP和19 phr APP复配使用时,UL-94达V-0级且LOI值为31.4,热释放速率峰值为265.3 kW/m~2,拉伸强度达8.11 MPa,FRSR的阻燃性能和力学性能得到明显的改善.适量的F-ZrP和APP复配使用能在气相和固相发挥协效阻燃作用,F-ZrP与APP的并用能提高残渣质量并且使阻隔层更加紧实,致密.     

Flame retardancy properties of α-zirconium phosphate based composites

α-Zr phosphate (hereafter referred to as ZrP) based composites were prepared by melt blending in order to improve the flame retardancy properties of polyamide 6 (PA6), polyethylene terephthalate (PET), polypropylene (PP) and ethylene vinyl acetate copolymer (EVA). Different morphologies are distinguishable by electron microscopy: PA6-ZrP seems to be a nanocomposite by Transmission Electron Microscopy (TEM) whereas PET-, PP- and EVA-ZrP blends appear micro-composites by X-Ray Diffraction (XRD) and Scanning Electron Microscopy (SEM) analyses. ZrP acts as flame retardant in PA6 reducing the total heat evolved and consequently the heat release rate during the combustion measured by cone calorimetry. Moreover, ZrP reduces the flammability of PET and EVA acting in synergistic effect with phosphorous based flame retardants. Indeed, it is showed that it is possible to reduce the amount of phosphorous flame retardant adding ZrP to reach UL94 classification V0 for both polymers.     

Dispersion of graphene oxide and its flame retardancy effect on epoxy nanocomposites

Graphene oxide was prepared by ultrasonication of completely oxidized graphite and used to improve the flame retardancy of epoxy.The epoxy/graphene oxide nanocomposite was studied in terms of exfoliation/dispersion,thermal stability and flame retardancy.X-ray diffraction and transmission electron microscopy confirmed the exfoliation of the graphene oxide nanosheets in epoxy matrix.Cone calorimeter measurements showed that the time to ignition of the epoxy/graphene oxide nanocomposite was longer than that of neat epoxy.The heat release rate curve of the nanocomposite was broadened compared to that of neat epoxy and the peak heat release rate decreased as well.     

PP/EVA/OMMT纳米复合材料及其阻燃材料的动态燃烧行为

利用锥形量热仪(CONE)在35kW/m2热辐照条件下,并结合极限氧指数(LOI)和UL-94垂直燃烧测试方法对聚丙烯(PP)/乙烯-醋酸乙烯酯共聚物(EVA)/有机蒙脱土(OMMT)纳米复合材料和加入无卤复配阻燃剂制备的PP/EVA/OMMT/氢氧化铝(ATH)/三氧化二锑(AO)纳米复合阻燃材料的热释放速率、烟释放及材料在燃烧时的质量损失行为进行了研究。结果表明,添加5%(质量分数)OMMT可以提高PP/EVA复合材料的阻燃性能,燃烧时的热释放速率、质量损失率以及烟释放量减少,且OMMT与无卤复配阻燃剂之间可产生阻燃协同作用,使纳米复合阻燃材料的阻燃性能、热稳定性和抑烟性进一步增强。     

Thermal degradation and flammability behavior of polypropylene/clay/carbon nanotube composite systems

This paper reports on the testing and development of a polypropylene (PP) nanocomposite systems with improved flame retardancy. The work utilizes the unique properties of sepiolite nanoclay (Sep) in combination with carbon nanotubes (CNTs) in order to develop an optimized ternary nanocomposite system. Thermogravimetric analysis (TGA) showed significant improvements to the residual char towards the later stages of the thermal ramp. The pyrolysis combustion flow calorimeter (PCFC) was employed to screen the various PP composites with respect to their potential flammability performance. The heat release capacity, which is an indicator of a materials fire hazard, did not show any reduction with the addition of nanofillers using the apparatus standard testing procedure. However, this changed by switching to a lower burn within the PCFC's furnace; this diverted oxygen to the pyrolysing sample. Using the results gained from TGA and the PCFC, the optimized ternary nanocomposite system (10 wt.% Sep + 2 wt.% CNT) was compounded on a larger scale and tested in the cone calorimeter. This showed a significant reduction of 82% in peak heat release rate in comparison to unfilled PP. Comparisons were also made between the testing of these samples in the PCFC and cone calorimeter. The main objectives were to develop a flame‐retardant PP nanocomposite ternary system as well as assessing the PCFC with traditional techniques. Copyright © 2012 John Wiley & Sons, Ltd.     

Flame retardancy and charring behavior of polystyrene‐organic montmorillonite nanocomposites

The fire performance of polystyrene‐organic montmorillonite (OMMT) nanocomposite was investigated by limiting oxygen index (LOI) and cone calorimetry. Scanning electron microscopy, electron dispersive spectroscopy and attenuated total reflection Fourier transform infrared spectroscopy were employed to study the charring process of the nanocomposite. The residue collected upon thermal degradation was analyzed by various means to determine its composition and to understand the flame‐retardant mechanism of the nanocomposite. It has been shown that the introduction of OMMT does not have much influence on LOI of the nanocomposite, but can greatly decrease the heat release rate (HRR) and mass loss rate (MLR) and enhance the flame retardancy of the material. The flame‐retardant mechanism is due to charring in the condensed phase. The intercalated nanostructure is destroyed, and the silicate nanolayers in the nanocomposite rearrange and accumulate on the material surface during pyrolysis. The charred residue has a honeycomb‐like porous structure, which covers on the material surface and serves as a protection barrier against heat transfer and mass exchange, leading to enhanced flame retardancy. The charred residue is composed of pyrolyzed silicate layers and graphitic char. The char is highly stable in nitrogen even at 800 °C, but thermo‐oxidative decomposition is allowed, and it can be removed completely in the presence of air. Due to the porous structure of the charred residue, the protection from it is mainly to reduce the HRR and MLR and retard burning of the material. It is not enough to make the nanocomposite self‐extinguish. Copyright © 2012 John Wiley & Sons, Ltd.     

Synergistic effect of graphene oxide and boron-nitrogen structure on flame retardancy of natural rubber/IFR composites

In this paper, GO-BN(graphene oxide grafted boron nitride) was synthesized from graphene oxide and boron nitride by silane coupling agent KH550. Furthermore, GO-BN and intumescent flame retardant (IFR) were added into natural rubber (NR) simultaneously to improve its flame retardancy. The structure of GO-BN was studied by Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). The analysis showed that GO-BN was successfully synthesized. The enhanced flame retardancy performance of flame retardant natural rubber (FRNR) was evaluated by limiting oxygen index (LOI) and UL-94 tests. Moreover, the combustion action of FRNR in fire was evaluated by cone calorimetry. Notably, the results showed that the sample with a GO-BN content of 12 phr showed the best flame retardancy performance. The heat release rate (HRR) and total heat release rate (THR) were remarkably decreased by 42.8% and 19.4%, respectively. Carbon residues were analyzed by infrared spectroscopy and scanning electron microscopy, which showed that GO-BN and IFR had a synergistic catalytic effect. The formation of compact thermal stable carbon layer after combustion was the key to protect engineering materials from combustion.     

Flame retardancy of polyamide 66 nanocomposites with thermally stable organoclay

A thermally stable imidazolium organoclay was synthesized to improve the flame retardancy performance of polyamide 66 (PA 66). To enhance flame retardancy of the PA 66/organoclay nanocomposite, the thermally stable organoclay was coated with monomethylol melamine (MMM) before melt‐compounding with PA 66. Transmission electron microscopy and X‐ray diffraction results confirmed the partial exfoliation of the organoclay in the PA 66 matrix. The use of the thermally stable organoclay did not affect the thermal stability of PA 66. The cone calorimeter results showed that the PA 66/orgnaoclay nanocomposite exhibited a greatly reduced heat release rate and a longer ignition time. However, the PA 66/organoclay binary nanocomposite had no rating in the UL‐94 vertical burning test because it did not extinguish until the entire polymer component was burnt. The PA 66 nanocomposite with 15 wt% of MMM‐coated organoclay performed better in the ignition resistance test than the PA 66/organoclay nanocomposite containing 15 wt% of melamine. Copyright © 2011 John Wiley & Sons, Ltd.     

Nanoengineering core/shell structured brucite@polyphosphate@amine hybrid system for enhanced flame retardant properties

A novel organic-inorganic hybrid flame retardant consisting of a brucite core and a dodecylamine polyphosphate shell was synthesized by a facile nanoengineering route. The flammability characterization and synergistic flame retardant mechanism of the core/shell flame retardant (CFR) in ethylene-vinyl acetate (EVA) blends had been compared with EVA/physical mixture (PM, with the given proportion of brucite and dodecylamine polyphosphate as well as CFR) and EVA/brucite blends. With the same loading amount (40 wt%) of fillers in EVA, the peak heat release rate and smoke production rate of EVA/CFR blends were significantly reduced to 49% and 48% of that of EVA/PM blends, respectively. Meanwhile, the limiting oxygen index (LOI) was increased up to 32 (14.3% higher than that of EVA/PM blends) and the UL-94 test could achieve the V-0 rating. These remarkable properties were obtained just by nanoengineeing the core/shell structured brucite@polyphosphate@amine hybrid system, facilitating the formation of intact and compact residue with fence structure in process of polymer composite burning.     

Study of nanocarbon black as synergist on improving flame retardancy of ethylene-vinyl acetate/brucite composites

Nanocarbon black (CB) was introduced into ethylene-vinyl acetate/brucite (EM) composites to investigate the synergistic effect of CB and metal hydroxide on improving the flame retardancy of EVA. Flammability properties of the as-prepared EVA composites were investigated by thermogravimetric analysis, limiting oxygen index (LOI), UL-94 test and cone calorimetry test. The results indicated that the optimum mass ratio of CB/brucite was 1/54, at which the EVA composites displayed dramatic improvement on thermal stability and flame retardancy. The LOI value was as high as 35.3%, the UL-94 passed the V-0 rating, and the peak heat release rate reduced 79% in comparison with pure EVA. Based on the morphology and structure analysis for residue chars, the flame-retardant mechanism was attributed mainly to the positive synergistic effect of CB and brucite on promoting the formation of better carbon protective layer during combustion.

     

Synergetic effect of thermal conductivity and flame retardancy of cyanate ester composites containing DOPO and BN with great dielectric properties

DOPO and boron nitride (BN) fillers with different particle sizes and several loadings were employed to improve the properties of cyanate ester (CE) resin. The effects of BN content and particle size on the thermal conductivity of the BN‐DOPO/CE ternary composites were discussed. The influence of enhancing the thermal conductivity of the ternary composites on their flame retardancy was studied. The consequences showed that increasing the thermal conductivity of BN‐DOPO/CE composites had an active impact on their flame retardancy. Approving flame retardancy of the ternary composites was certified by the high limiting oxygen index (LOI), UL‐94 rating of V‐0, and low heat release rate (HRR) and total heat release (THR). For instance, in contrast with pure CE matrix, peak of HRR (pk‐HRR), average of HRR (av‐HRR), THR, and average of effective heat of combustion (av‐EHC) of CEP/BN_{0.5 μm}/10 composite were decreased by 51.7%, 33.8%, 18.7%, and 18.9%, respectively. Thermal gravimetry analysis (TGA) showed that the addition of BN fillers improves the thermal stability of the composites. Moreover, the ternary composites possess good dielectric properties. Their dielectric constants (ε) are less than 3, and dielectric loss tangent (tgδ) values are lower than neat CE resin.     

Nanoclay synergy in flame retarded/glass fibre reinforced polyamide 6

Exfoliated clay nanocomposites of flame retarded/glass fibre reinforced polyamide 6 were prepared by twin-screw extrusion compounding. A flame retardant system based on phosphorus compounds and zinc borate was used at various levels in glass fibre reinforced PA6 and nanocomposites. Thermal stability and combustion behaviours were evaluated by TGA, LOI, UL94 and cone calorimetry. Substitution of a certain fraction of the flame retardant with nanoclays was found to significantly reduce the peak heat release rate and delay ignition in the cone calorimeter. Moreover, remarkable improvements were obtained in LOI along with maintained UL94 ratings. Residue characterization by FTIR, XRD and SEM ascribed the enhanced flame retardancy of nanocomposite formulations to the formation of a glassy boron/aluminium phosphate barrier reinforced by clay layers at the nanoscale. The physically strong and consolidated barriers formed from nanocomposites were much more effective in impeding heat and mass transfer compared to those from conventional formulations.     

Effect of Organo‐Modified Nanosepiolite on Fire Behaviors and Mechanical Performance of Polypropylene Composites

The objective of the study was to investigate the effect of the organo‐modified nanosepiolite (ONSep) on improving the fire safety of polypropylene (PP). The composites based on PP, flame retardant master batch (MB‐FR, 25 wt% PP+50 wt% decabromodiphenyl ether (DBDPE)+25% antimony trioxide (ATO)) and ONSep were prepared via melt blending. The results of the limiting oxygen index (LOI) and vertical burning rating (UL‐94) test indicated that PP/40 wt% MB composites had no rating with seriously dripping phenomenon, while the LOI value was only 22.5. However, as 4 wt% ONSep was added in PP/40 wt% MB composites, the composites achieved UL94 V‐0 rating and the LOI value was 24.3. In comparison, PP/50 wt% MB composites could not reach the V‐0 rating either. The TGA results revealed that the addition of ONSep enhanced the thermal stability of the PP/MB‐FR composites. The cone calorimeter results indicated that the heat release rate, average mass loss rate, smoke production rate and smoke temperature of the PP/40 wt% MB‐FR/4 wt% ONSep composites decreased in comparison with those of PP/40 wt% MB‐FR composites. Simultaneously, the Young modulus and impact strength were also much better improved with the increase of ONSep loading. Therefore, the synergistic flame retardancy of ONSep in PP/MB‐FR matrix significantly containing a halogen based flame retardant (DBDPE) significantly improved the fire safety and mechanical properties of the composites, and allowed to decrease the total amount of brominated fire retardants.     

Effect of nanosized carbon black on thermal stability and flame retardancy of polypropylene/carbon nanotubes nanocomposites

Nanosized carbon black (CB) was introduced into polypropylene/carbon nanotubes (PP/CNTs) nanocomposites to investigate the effect of multi‐component nanofillers on the thermal stability and flammability properties of PP. The obtained ternary nanocomposites displayed dramatically improved thermal stability compared with neat PP and PP/CNTs nanocomposites. Moreover, the flame retardancy of resultant nanocomposites was greatly improved with a significant reduction in peak heat release rate and increase of limited oxygen index value, and it was strongly dependent on the content of CB. This enhanced effect was attributed mainly to the formation of good carbon protective layers by CB and CNTs during combustion. Rheological properties further confirmed that CB played an important role on promoting the formation of crosslink network on the base of PP/CNTs system, which were also responsible for the improved thermal stability and flame retardancy of PP. Copyright © 2013 John Wiley & Sons, Ltd.     

Thermogravimetry as a tool for measuring of fracturing fluid absorption in shales

A series of flame-retardant ethylene–vinyl acetate (EVA) composites with different contents of aluminum phosphate (AHP) and Trimer were prepared. The synergistic flame-retardant effects of the Trimer with AHP in EVA/AHP blends were studied by limiting oxygen index (LOI) tests, UL-94 tests, cone calorimeter tests, thermogravimetric analysis, and scanning electron microscopy (SEM). The LOI and UL-94 results showed that the system containing AHP and Trimer was very effective in improving the flame retardancy of EVA. When the mass ratio of AHP and Trimer was 3:1, the highest flame retardancy could be obtained, and when the flame-retardant loading was 30 wt%, the EVA/AHP/Trimer (7.5%) sample could achieve the V-0 rating in UL-94 tests, at the same time, its LOI value was 24.4%. The TG and DTG results showed that the addition of flame retardants catalyzes EVA decomposition in the first stage and generates a more stable char residue in the second stage. Consequently, an efficient reduction in the flammability parameters, such as heat release rate, total heat release, smoke production rate, and total smoke production could be observed. In addition, it was observed from the SEM observations of the morphological features that the AHP and Trimer combination, at the optimum proportion, could promote the formation of compact charred layers and prevent their cracking, which effectively protected the underlying materials from burning.     

Preparation of a novel phosphorus‐containing organosilicon and its effect on the flame retardant and smoke suppression of polyethylene terephthalate

A novel phosphorus‐containing silicone flame retardant (PDPSI) was prepared by Mannish reaction, and a series of PDPSI/PET composites were prepared by melt blending method. The nuclear magnetic resonance (¹H NMR), Fourier transformation infrared (FTIR), and the thermogravimetric analyzer (TGA) results indicated that PDPSI showed network structure and owned good thermal stability, with the char residue of 62.2% at 800°C. The flame retardancy of PDPSI/PET composites was characterized by limiting oxygen index (LOI), vertical burning tests (UL‐94), and cone calorimeter (CCT). The results revealed that the addition amount of PDPSI was 5%, the LOI value of PDPSI/PET composites increased to 27.3%, and UL‐94 test passed V‐0 rating. When the PDPSI loading was 3%, PET composites showed excellent flame retardancy and smoke suppression, with a decrease in the peak heat release rate (PHRR) by 71.19% and the total smoke release (TSP) reduced from 14.4 to 11.1m². The scanning electron microscopy (SEM) and FTIR results of char residue demonstrated that the flame‐retardant mechanism of PDPSI was solid phase flame retardant. PDPSI catalyzed the aromatization reaction of PET to promote the formation of a dense and continuous carbon layer, finally improving the flame retardancy and smoke suppression properties of PET.     

硅橡胶复合材料阻燃研究进展

将功能填料引进到硅橡胶及其复合材料中可以获得特定功能的硅橡胶复合材料,已经成为近些年研究热点。目前阻燃剂种类繁多,但是性能比较单一,这已经不能满足人们的需要。人们在关注硅橡胶复合材料阻燃性能的同时,也考虑与其它性能兼备以及成本等问题。因此,本文综述了铂化合物、磷系阻燃剂、阻燃涂层、阻燃填料和微胶囊化阻燃剂等阻燃体系下硅橡胶复合材料的阻燃研究现状,总结了不同阻燃剂的阻燃机理,并且给出了其今后的改进方法,最后对硅橡胶复合材料阻燃研究的发展做了展望。     

Poly(lactic acid) nanocomposites with improved flame retardancy and impact strength by combining of phosphinates and organoclay

To minimize the loading level of the char-forming phosphorus based flame retardants in the poly(lactic acid) (PLA) with reduced flammability, we have developed the flame-retarded PLA nanocomposites by melt blending method incorporating organically modified montmorillonite (OMMT) and aluminium diethylphosphinate (AlPi) additives. The influence of AlPi and OMMT on flame retardancy and thermal stability of PLA was thoroughly investigated by means of the limiting oxygen index (LOI), UL94 test, cone calorimeter, X-ray diffraction (XRD), thermogravimetric analysis and scanning electronic microscopy (SEM). The experimental results show that the PLA/AlPi/OMMT system has excellent fire retardancy. The LOI value increases from 19% for pristine PLA to 28% for the flame-retarded PLA. Cone calorimeter analysis of the PLA/AlPi/OMMT exhibits a reduction in the peak heat release rate values by 26.2%. Thermogravimetric analysis and SEM of cone calorimeter residues indicate that OMMT significantly enhances the thermal stability, promotes char-forming and suppresses the melt dripping. The research of this study implies that the combining of the flame retardant and organoclay results in a synergistic effect. In addition, the flame-retarded PLA nanocomposite also exhibits notable increase in the impact strength and the elongation at break.     

阻燃及可瓷化硅橡胶成炭结构的研究进展

简单介绍了硅橡胶的阻燃和瓷化机理。依据阻燃剂、填料及炭层结构的不同,将硅橡胶分为阻燃和可瓷化两大类.综述了阻燃硅橡胶和可瓷化硅橡胶的阻燃性能和成炭结构的研究进展。分析表明:添加物理或化学膨胀型阻燃剂的硅橡胶,燃烧过程中形成的炭层疏松多孔,阻燃隔热性能优异,但炭层强度差;添加非膨胀型阻燃剂的硅橡胶,炭层结构相对密实,但表面不平整,存在孔洞和裂缝,阻燃效果不好;添加可瓷化填料的硅橡胶燃烧形成的陶瓷炭层坚硬而致密,具有优异的耐火持久性,但在隔绝热量方面不如膨胀炭层。炭层的疏松隔热与坚固耐久兼顾是阻燃硅橡胶未来可能的发展方向。