三头季铵盐表面活性剂导向合成新型立方相介孔二氧化硅

介孔分子筛因具有大而均一的孔道、高比表面积及相对良好的热稳定性而在精细化学品催化剂[1,2 ] 、生物大分子分离 [3] 和功能材料的主体 [4 ] 等领域有十分广阔的应用前景 .自 1 992年 Mobil公司合成 M41 S[5,6 ] 系列介孔材料以来 ,HMS[7] ,MSU[8] 和 SBA[9～ 12 ] 系列以及 FDU- 1 [13] 等不同结构的介孔分子筛材料相继被合成 .立方相介孔分子筛因具有三维网状结构和可通性较高的孔道而在反应中不易堵塞 ,相对于一维孔道结构的六角相 MCM- 41和 SBA- 1 5 ,其应用前途更加广阔 .迄今 ,人们已经合成了 MCM- 48[14～ 16 ]( Ia3d) …     

MCM-48分子筛的合成及在催化领域的应用进展

自从M41S系列分子筛问世以来,介孔分子筛的合成和应用研究便成为热门领域之一.其中MCM-48具有～2.6 nm的均匀孔径、三维螺旋面的孔道结构、良好的长程周期性和稳定的骨架结构[1-3].MCM-48的这种三维螺旋结构孔道比MCM-41一维结构孔道更有优势,可以有效地避免客体     

介孔分子筛SBA-15中α-胰凝乳蛋白酶组装及催化活性研究

介孔分子筛由于规则孔道或笼的存在 ,使其具有择形催化作用、高比表面积和强吸附性能 ,其孔道中可组装多种物质而改变其理化性能 .Thomas等 [1] 在介孔 Si O2 上接枝金属茂复合物 .白妮 [2 ] 和张雪峥 [3 ] 等分别将脂溶性金属酞菁衍生物和杂多酸封装在介孔分子筛中 ,得到的组装体催化性能优良 .近年来由于不断合成出 MCM- 41 [4 ] 和 SBA- 1 5 [5] 等孔径较大的介孔分子筛 ,使在介孔材料孔道中组装生物大分子成为可能 .Yen等 [6] 将细胞色素 c组装到孔道中 ,并使酶的稳定性得到提高 ,而α-胰凝乳蛋白酶 (Mr=2 5 0 0 0 ,分子动力学直径…     

混合表面活性剂模板法合成立方相介孔含钛氧化硅

自1992年Ｍｏｂｉｌ公司的Ｍ41Ｓ系列介孔氧化硅分子筛问世以来[1,2],借助表面活性剂液晶模板方法合成各种孔结构与不同大小孔径的硅基分子筛材料引起了人们的极大兴趣,目前多数工作仍然集中于六方相的介孔分子筛.具有双连续的三维交织立方排列孔道结构的ＭＣＭ48由于其孔道不易堵塞和良好的骨架结构稳定性[3,4],在催化、吸附和与其为载体的制备等方面具有独特的应用价值.但由于液晶模板形成立方相区的范围非常狭窄,相应的分子堆积比对模板剂分子几何结构要求较苛刻,采用单一表面活性剂为模板剂合成时,条件难以掌握,制备ＭＣＭ48十分困难.Ｈ…     

具有强酸位的六方和立方介孔硅铝分子筛合成及催化活性比较

六方 MCM- 41和立方 MCM- 48介孔分子筛是长程有序的介孔材料 ,由于其孔壁是无定形结构 ,具有较弱的酸性 ,限制了其应用范围 .若能提高它们的酸强度则可提高其在石油炼制和精细化工中的应用价值 .现已采用多种改进方法来提高其酸强度 [1～ 6 ] ,但所合成的介孔材料均为六方结构 ,而具有立方结构的材料未见文献报道 .本文采用两步晶化合成法 ,用低浓度的表面活性剂合成出具有强酸位的立方介孔分子筛 ( MB48) ,还通过调节溶液的酸碱性合成出六方介孔分子筛 ( MB41 ) ,对样品的结构、酸性和催化性能进行了表征和比较 .1　实验部分1 .1　 β…     

介孔材料MCM-41的合成与性能表征

在水热条件下用新的合成控制手段得到孔壁较厚的MCM-41介孔分子筛材料,并采用XRD、N2吸附、TG-DTA、SEM和吡啶程序升温脱附等测试手段对合成的MCM-41样品进行表征,结果表明合成的介孔材料结晶度比较高,具有六方排列的孔道结构,孔径分布较窄,BET表面积较大,样品热稳定性高,吡啶-TPD谱图表明样品具有弱的或中等强度的酸性.用MCM-41作为活性组分制备成催化剂,进行微反活性实验,表明其裂化活性较低,但对柴油有较高的选择性.     

"面包圈"状高有序度大孔径介孔分子筛SBA-15的合成

介孔材料因其高度有序的大孔径、较佳的催化吸附性能、良好的电磁性质及易于剪裁而引起人们极大的兴趣[1～9].人们已相继合成了介孔氧化硅薄膜[3,10]、球[12]、空心球[4,13]和纤维[12～15]等,并设法控制中孔材料晶体外貌[3～9,15～21].最近,我们报道了利用多相组装和无机晶体(如NaCl,LiCl)作大孔结构导向剂的方法[16],合成了人造"珊瑚"状介-大孔氧化硅膜[13].Lin等[17]用共表面活性剂法在丁醇存在下合成了多组有序结构的介孔氧化硅空心球; Shio等[21]在完全溶解的硅酸钠和阳离子表面活性剂溶液中,合成了细棒状介孔氧化硅粉末.本文报道一种控制介孔材料颗粒外貌和形状的新方法,即共溶剂法,并以此法合成了高有序度、大孔径、 "面包圈"状介孔氧化硅SBA-15.这种新材料有望在微加工、催化、生物分离、电子器件的矿化、色谱载体等方面得到应用[1～9].     

水玻璃为原料在开放体系中快速合成介孔材料MCM-41

自从 M41 S系列硅基介孔分子筛被人工合成以来[1,2 ] ,有关分子筛的合成、性能、形成机理、结构和应用等方面的研究报道不断出现[3～ 5] .目前 ,由有机 -无机离子经分子水平的自组装结合而产生介孔材料的合成机理主要归结于在合成过程中表面活性剂的模板效应 ,如液晶模板机理[1,2 ] 、棒状自组装模型[6 ] 、电荷匹配机理[7] 、层状折皱模型[8] 和使用非离子表面活性剂合成介孔材料等效应[9] .本文以水玻璃作为硅源 ,以十六烷基三甲基溴化铵 (CTAB)阳离子表面活性剂为模板剂 ,在温和条件下 ,采用开放体系合成出具有 MCM-4 1结构特点的介…     

Pd/PdO在MCM-41介孔材料孔表面的溶液移植

利用PdCl~2溶液与介孔结构硅酸铝合成原粉反应,把Pd/PdO多用途催化剂移植到MCM-41材料孔表面。产物用XRD,热分析(TG/DTA),TEM,N~2吸附及FT-IR光谱等手段进行表征。结果表明,钯经由Si-O-Pd键负载在硅酸铝骨架及孔表面上。在有序介孔材料外表面沿着孔道方向粘附着直径为10-30nm的Pd/PdO晶粒。研究表明,采用这种液相移植的方法可以有效负载金属催化剂,并防止孔道堵塞。     

苯及苯磺酸基官能化的中孔分子筛的合成及催化应用

近年来 ,通过对介孔分子筛 (如 MCM,HMS,MSU-X)结构及组成的化学“裁剪”,制备具有特定结构和表面性质的催化材料成为该领域的研究热点之一 [1～ 5] .许多文献报道了 MCM-4 1的有机官能化中孔材料的制备技术 [5～ 8] ,并将其应用于有机合成反应 ,取得了较好的结果 [7,8] .其中 MSU-X介孔分子筛结构具有三维排列“Worm-like”孔道特征 ,有利于物料传输 ;相对于 MCM-4 1分子筛在合成方面具有以中性表面活性剂作模板剂且模板剂容易去除等诸多优点[9] .本文采用非离子表面活性剂 C11— 15H2 3— 31(CH2 CH2 O) 9H(AEO9)为模板剂 ,…     

Sorption and diffusion of phenols onto well-defined ordered nanoporous monolithic silicas

The sorption of phenol, and o-, m-, and p-aminophenol (o-, m-, and p-AP) onto highly ordered mesoporous silicas (HOM) with cubic Im3m (HOM-1), hexagonal H(I) (HOM-2), 3-D hexagonal p6(3)/mmc (HOM-3), cubic Ia3d (HOM-5), lamellar L( infinity ) (HOM-6), and solid phase S (HOM-8) materials has been investigated kinetically. Nanostructured silica molecular sieves have been prepared at 25 and 60 degrees C with lyotropic liquid-crystalline phases of the nonionic surfactant (Brij 76) that was used as a structure-directing agent. Such nanostructured silicas have been studied by 29Si nuclear magnetic resonance (29Si NMR), powder X-ray diffraction (XRD), the Brunauer-Emmett-Teller (BET) method for nitrogen adsorption and surface area measurements, and transmission electron microscopy (TEM) techniques after synthesis and sorption. It was found that all materials exhibit well-defined long-range porous architectures without significant loss of the ordered texture during phenol sorption. The kinetics of phenol sorption has been studied spectrophotometrically at different temperatures (25-40 degrees C; +/-0.1 range). The sorption rate is zero order in all phenols sorbed, and increases directly in the pattern P >m-AP > o-AP > p-AP, which reflects the mobility of the phenol compounds on the particle pores. The isothermal sorption and the kinetic parameters were discussed and it was established that a diffusion-controlled process characterizes phenol sorption. Furthermore, the mechanism of phenol sorption was deduced to be predominantly particle diffusion. The diffusion coefficients were determined using Fick's equation. The trend of diffusion of all phenols onto nanoporous silica was HOM-8 > HOM-2 > HOM-6 > HOM-5 > HOM-1 > HOM-3, reflecting the effect of the uniform pore size distribution and the internal surface area of the nanostructured silicas on the diffusion process.     

Three‐Dimensional Ultralarge‐Pore Ia3d Mesoporous Silica with Various Pore Diameters and Their Application in Biomolecule Immobilization

Highly ordered mesoporous three‐dimensional Ia3d silica (KIT‐6) with different pore diameters has been synthesized by using pluronic P123 as surfactant template and n‐butanol as cosolvent at different synthesis temperatures in a highly acidic medium. The materials were characterized by XRD and N₂ adsorption. The synthesis temperature plays a significant role in controlling the pore diameter, surface area, and pore volume of the materials. The material prepared at 150 °C, KIT‐6‐150, has a large pore diameter (11.3 nm) and a high specific pore volume (1.53 cm³ g^?1). We also demonstrate immobilization of lysozyme, which is a stable and hard protein, on KIT‐6 materials with different pore diameters. The amount of lysozyme adsorbed on large‐pore KIT‐6 is extremely large (57.2 μmol g^?1) and is much higher than that observed for mesoporous silicas MCM‐41, SBA‐15, and KIT‐5, mesoporous carbons, and carbon nanocages. The effect of various parameters such as buffer concentration, adsorption temperature, concentration of the lysozyme, and the textural parameter of the adsorbent on the lysozyme adsorption capacity of KIT‐6 was studied. The amount adsorbed mainly depends on solution pH, ionic strength, adsorption temperature, and pore volume and pore diameter of the adsorbent. The mechanism of adsorption on KIT‐6 under different adsorption conditions is discussed. In addition, the structural stability of lysozyme molecules and the KIT‐6 adsorbent before and after adsorption were investigated by XRD, nitrogen adsorption, and FTIR spectroscopy.     

三维有序大孔-介孔二氧化硅的可控制备及表征

以聚甲基丙烯酸甲酯(PMMA)胶晶为大孔模板、嵌段共聚物P123为介孔模板,利用双模板剂法进行了三维有序大孔-介孔二氧化硅材料的制备研究。采用SEM、TEM、低角XRD以及N₂吸脱附技术对样品进行了表征。结果表明,通过简单的调控PMMA胶晶模板的组装过程,就可以调变合成材料中的大孔结构,从而轻松地实现可控的制备出具有网状或者层状结构的三维有序大孔-介孔二氧化硅材料,并提出了其可能的形成机理。此外,所制备的三维有序大孔-介孔二氧化硅样品均具有较大的BET比表面积(>550m₂·g^-1),大孔孔径200nm左右,介孔孔径分布集中于3.5nm左右。     

A novel method for synthesis of mesoporous ZSM-5 from iron ore tailings

Mesoporous ZSM-5 was prepared from iron ore tailings (IOT) using a two-step process. Mesoporous MCM-41 was first synthesized using cetyltrimethylammonium bromide (CTAB) as mesoporous template and IOT as silica source. The CTAB in the as-synthesized MCM-41 was used as the mesoporogen to produce the mesoporous ZSM-5, by recrystallizing the amorphous walls of MCM-41 with tetrapropylammonium bromide (TPABr) as the structure-directing agent via solid-phase conversion. To evaluate the textural properties of mesoporous ZSM-5, the as-synthesized samples were characterized using x-ray diffraction, scanning electron microscopy, transmission electron microscopy, ²⁹Si, ²⁷Al magic angle spinning nuclear magnetic resonance spectroscopy, and nitrogen adsorption. The results show that phase separation between the surfactant and zeolite crystals was avoided in the solid-phase conversion process, which transforms the as-synthesized MCM-41 to mesoporous zeolite. Therefore, the synthetic route presented herein provides a novel method for the synthesis of mesoporous ZSM-5 from IOT.

     

Synthesis and characterization of Pr<Superscript>3+</Superscript>-doped glass scintillators prepared by the sol–gel method

Transparent and crack-free Pr-doped silica glass scintillators were successfully synthesized using the sol–gel method. A peak found at 301 nm in the photoluminescence spectrum was ascribed to a radiative transition of the Pr³⁺ emission center. The associated excitation peak was located at 276 nm. The energy of the excitation peak (4.50 eV) was significantly lower than the energy gap (5.83 eV) of the ¹S₀ to ³H₄ f–f transition. Therefore, the f–f transition was excluded as the origin, and the transition was attributed to 5d–4f. In the absorption spectrum, several bands of the f–f transition were observed. Fourier transform infrared spectroscopy was employed to understand the microstructural features and OH group concentration in the Pr³⁺-doped silica glass. It was revealed that a Si–O network had been successfully formed, and that the OH group concentration decreased with increasing thermal treatment temperature reaching a saturation value for temperatures higher than 750 °C. The absence of praseodymium oxide nanocrystalline clusters was confirmed by transmission electron microscopy (TEM), even in the sample with the highest Pr ion concentration. Scintillation properties of the Pr³⁺-doped silica glass were also characterized. The scintillation decay time constants were estimated to be approximately 1.3 and 14 ns, which supports the assignment of the luminescence to the 5d–4f transition. The scintillation light yield of the Pr³⁺-doped silica glass was estimated to be approximately 130 photons/MeV.     

半晶化双螺旋介孔MnO2的合成和电化学性质

Mesoporous silica KIT-6 has novel three-dimensional gyroidal channel structure, space group of 1a-3d, and ordered tunable pores up to 10 nm. In this paper, such mesostructured silica was employed as hard template to prepare semicrystalline gyroidal mesoporous MnO2. The structure was investigated by XRD, TEM and HRTEM, and found to be of high quality 1a-3d symmetry, in good accordance with the template structure. The material has a BET surface of 118 m2·g^-1 and pore volume of 0.35 cm3·g^- 1 after eliminating template. Mesoporous MnO2 has shown good electrochemical property as supercapacitor material in 1 mol·L^-1 Na2SO4 and 1 mol·L^-1 LiClO4 solutions, but interesting pseudocapacitance behavior was observed in the case of 6 mol·L^-1 KOH. It was found that mesoporous MnO2 performed stable reversible electrochemical behavior with capacitance of 220 F·g^-1 in a potential range of -0.1-0.55 V vs. Hg/HgO in alkaline solution, demonstrating that it is a promising novel electrode material for the fabrication of electrochemical capacitors.     

Exploring meso-/microporous composite molecular sieves with core-shell structures

A series of core–shell‐structured composite molecular sieves comprising zeolite single crystals (i.e., ZSM‐5) as a core and ordered mesoporous silica as a shell were synthesized by means of a surfactant‐directed sol–gel process in basic medium by using cetyltrimethylammonium bromide (CTAB) as a template and tetraethylorthosilicate (TEOS) as silica precursor. Through this coating method, uniform mesoporous silica shells closely grow around the anisotropic zeolite single crystals, the shell thickness of which can easily be tuned in the range of 15–100 nm by changing the ratio of TEOS/zeolite. The obtained composite molecular sieves have compact meso‐/micropore junctions that form a hierarchical pore structure from ordered mesopore channels (2.4–3.0 nm in diameter) to zeolite micropores (≈0.51 nm). The short‐time kinetic diffusion efficiency of benzene molecules within pristine ZSM‐5 (≈7.88×10^?19 m² s^?1) is almost retainable after covering with 75 nm‐thick mesoporous silica shells (≈7.25×10^?19 m² s^?1), which reflects the greatly opened junctions between closely connected mesopores (shell) and micropores (core). The core–shell composite shows greatly enhanced adsorption capacity (≈1.35 mmol g^?1) for large molecules such as 1,3,5‐triisopropylbenzene relative to that of pristine ZSM‐5 (≈0.4 mmol g^?1) owing to the mesoporous silica shells. When Al species are introduced during the coating process, the core–shell composite molecular sieves demonstrate a graded acidity distribution from weak acidity of mesopores (predominant Lewis acid sites) to accessible strong acidity of zeolite cores (Lewis and Brønsted acid sites). The probe catalytic cracking reaction of n‐dodecane shows the superiority of the unique core–shell structure over pristine ZSM‐5. Insight into the core–shell composite structure with hierarchical pore and graded acidity distribution show great potential for petroleum catalytic processes.     

Highly Ordered Mesoporous Carbonaceous Frameworks from a Template of a Mixed Amphiphilic Triblock‐Copolymer System of PEO–PPO–PEO and Reverse PPO–PEO–PPO

A series of highly ordered mesoporous carbonaceous frameworks with diverse symmetries have been successfully synthesized by using phenolic resols as a carbon precursor and mixed amphiphilic surfactants of poly(ethylene oxide)‐b‐poly(propylene oxide)‐b‐poly(ethylene oxide) (PEO–PPO–PEO) and reverse PPO–PEO–PPO as templates by the strategy of evaporation‐induced organic–organic self‐assembly (EISA). The transformation of the ordered mesostructures from face‐centered (Fd m) to body‐centered cubic (Im m), then 2D hexagonal (P6mm), and eventually to cubic bicontinuous (Ia d) symmetry has been achieved by simply adjusting the ratio of triblock copolymers to resol precursor and the relative content of PEO–PPO–PEO copolymer F127, as confirmed by small‐angle X‐ray scattering (SAXS), transmission electron microscopy (TEM), and nitrogen‐sorption measurements. The blends of block copolymers can interact with resol precursors and tend to self‐assemble into cross‐linking micellar structures during the solvent‐evaporation process, which provides a suitable template for the construction of mesostructures. The assembly force comes from the hydrogen‐bonding interactions between organic mixed micelles and the resol‐precursor matrix. The BET surface area for the mesoporous carbonaceous samples calcined at 600 °C under nitrogen atmosphere is around 600 m² g^?1, and the pore size can be adjusted from 2.8 to 5.4 nm. An understanding of the organic–organic self‐assembly behavior in the mixed amphiphilic surfactant system would pave the way for the synthesis of mesoporous materials with controllable structures.     

Cubic phases of 4′-n-alkoxy-3′-nitrobiphenyl-4-carboxylic acids (ANBC-n)

The structure of the thermotropic cubic phases of 4′- ⁿ -alkoxy-3′-nitrobiphenyl-4-carboxylic acids (ANBC- ⁿ , where ⁿ indicates the number of carbon atoms in the alkoxy group) was studied by X-ray diffraction. For the homologues with ⁿ = 15, 16, 17, and 18, the cubic phase was of an ^Ia 3 ^d type, whereas the homologues with ⁿ = 19, 20, and 21 exhibited an ^Im 3 ^m cubic structure; for these seven homologues the same type of cubic structure was observed both on heating and cooling. Further lengthening of the alkoxy chain to ⁿ = 22 and 26, however, gave two types of cubic structure in the cubic phase region on heating, one with ^Im 3 ^m symmetry in the low temperature region and the other with ^Ia 3 ^d symmetry in the high temperature region. On cooling, the two homologues exhibited the ^Ia 3 ^d cubic structure only. This is the first example in the cubic phase region of a series of homologues containing two types of structure, dependent on temperature and ⁿ . Such a complicated phase diagram in the cubic region is clearly understood qualitatively in terms of Gibbs free energy-temperature diagrams. The dependence of structural parameters such as the cubic lattice constant on the alkoxy chain length ⁿ are also presented and discussed.     

基于长链离子液体模板合成Fe(Co、Ni)-MCM-48

以两亲长链离子液体(氯化-1-十六烷基-3-甲基咪唑)为模板剂,采用水热合成方法,分别合成了含铁、钴和镍的立方介孔分子筛MCM-48。通过XRD、TEM、ICP-AES、FTIR、UV-Vis和N₂吸附/脱附实验对其结构和形态进行了表征,并考察了钴掺杂量和模板剂用量对合成立方相结构的影响。结果表明,用该方法合成的试样具有较高的比表面积和规则的立方介孔孔道结构等特征;相对于铁和镍的掺杂试样,钴物种能以四面体的结构稳定地存在于立方介孔分子筛骨架中。