聚氯乙烯—聚氧乙烯共混物的反相色谱研究

用反相色谱研究了聚氯乙烯与聚氧乙烯的相容性，发现其共混物的经保留体积Ｖｇ２３具有重量加和性，表明共混物可能发生了相分离，导出了相分离体系聚合物相互作用参数Ｘ２３的近似关系式：ｘ２３＝（ｘ１２－ｘ１３）＾２／２，由此式可以解释ｘ２３对探针种类的依赖性，聚氯乙烯和聚氧乙烯共混体系的反相色谱实验结果基本符合这一关系式。     

振荡剪切流场下PS/PVME/SiO2复合物的相行为

利用光学显微镜-剪切台联用系统研究了振荡剪切流场下聚苯乙烯（PS）/聚甲基乙烯基醚（PVME）/二氧化硅（SiO₂）纳米粒子复合物的热力学稳定性. 结果表明,小振幅振荡剪切可导致PS/PVME共混物出现类似在稳态流场下的剪切诱导相容及剪切诱导相分离现象. 共混体系存在临界振荡频率ω_c,当振荡频率低于ω_c时,发生剪切诱导相分离（SID）行为,反之发生剪切诱导相容（SIM）行为. SiO₂纳米粒子的加入使复合体系的相容性提高. 存在一个临界SiO₂纳米粒子含量φ_c,当SiO₂纳米粒子含量高于φ_c时,复合体系中不存在临界振荡频率ω_c,低振荡频率下的剪切诱导相分离得到抑制. 此外,复合体系的上述行为与升温速率和共混物组成密切相关.     

反相气相色谱法研究聚合物共混物的相溶性

 用反相气相色谱法测定了聚氯乙烯(PVC)／ 乙烯-醋酸乙烯共聚物(EVA)共混体系中分子间表观热力学相互作用参数χ′23,并以χ′23 为判定依据,研究了共混物的相溶性。 初步探讨了共混物的组成、聚合物分子 链结 构、温度与χ′23的关系以及探针分子性质 对χ′23参数的影响。结果表明：χ[ HT6〗′23值能够准确有效地判定PVC与EVA共混物的 相溶性,醋酸乙烯质量分数低的EVA与PVC的共混物是热力学不相溶的;而醋酸乙烯质量 分数中等的EVA与PVC的共混物则具有部分相溶性。结果与其它方法得到的结论是一致的 。     

基于二醛微晶纤维素功能化C18的反相/亲水色谱固定相的制备

通过十八烷基胺的氨基与二醛微晶纤维素的醛基共价键合,制备了基于二醛微晶纤维素(DMCC)官能化C₁₈的新型反相/亲水色谱固定相(C₁₈-DMCC/SiO₂),该色谱固定相被用于反相色谱(RPLC)和亲水相互作用色谱(HILIC)模式。C₁₈-DMCC/SiO₂色谱柱展现了良好的疏水选择性和芳香选择性,在反相色谱模式下可分离烷基苯和多环芳烃(PAHs)。苯胺类、酚类和糖苷类等极性化合物被用于评估该色谱柱在反相色谱模式下的极性选择性,商品C₁₈柱作对照柱,色谱评价结果令人满意。核酸碱基被用于评估C₁₈-DMCC/SiO₂色谱柱的亲水色谱性能。通过考察有机溶剂含量对分析物保留的影响,发现该新型色谱固定相具有反相/亲水色谱的典型特征。     

硒和碲的反相薄层色谱和溶剂萃取的研究

通过对硒和碲的反相薄层色谱和溶剂萃取的研究,及碲在反相薄层色谱和溶剂萃取中的盐析效应,证明在这一体系中,硒和碲的反相薄层色谱过程为分配过程,由反相薄层色谱的实验结果可预测萃取中的分离情况。并得出了碲的R_f值和D值同盐析剂性质间的经验式:R_f=a-b[M]-dz/r D=e+f[M]⁹z/r较为满意地解释了盐析效应的机制,另外通过加入盐析剂也可改善硒和碲的分离效果,用双对数法确定了碲的萃合物组成为H₂TeBr₆·2P₃₆₀,表观萃取平衡常数为K_cx=1.4×10^-2。结合氯化亚锡法,萃取法用于二氧化硒样品中对碲的萃取分离和测定,获得良好结果。     

A/B/A-b-B/(A-b-B)4四元共混体系相行为的自洽场理论研究

为了模拟多组分高抗冲聚丙烯(HIPP)的相分离及其形态, 我们运用自洽场理论(self-consistent field theory, SCFT)研究了均聚物A/均聚物B/两嵌段共聚物A-b-B/交替共聚物(A-b-B)₄四元共混体系的相分离及形态演化, 着重讨论了各种组分的链长和含量对体系形成各种多层核壳结构的影响.     

聚偏氟乙烯共混体系的压电性及其分子运动

聚偏氧乙烯(PVDF)的压电效应近年来引起了人们的极大兴趣,为了探索PVDF共混体系中第二组分对薄膜压电性能的影响及开发新的压电材料,我们研究了PVDF的三个共混体系的压电性及其分子运动。这三个共混体系是: 1.PVDF+PMMA(聚甲基丙烯酸甲酯);2.PVDF+F₂₆(偏氟乙烯-全氟丙烯共聚物),3. PVDF+F₂₄(偏氟乙烯-四氟乙烯共聚物)。     

聚甲基丙烯酸甲酯/聚(苯乙烯-丙烯腈)共混体系相分离的特征动态流变响应

采用动态流变学方法,结合小角激光光散射(SALLS)测定,对聚甲基丙烯酸甲酯(PMMA)/聚(苯乙烯－丙烯腈)(SAN)共混体系的动态流变行为与相分离的关系进行了研究.发现在低频区域,时温叠加失效与共混物体系发生相分离有关,时温叠加失效温度T_b与用SALLS测定的浊点温度T_c一致,用低频区域动态储能模量G'与频率的关系[1gG'～lg(α_T)]偏离线性粘弹模型或时温叠加失效温度表征PMMA/SAN共混体系的相分离是有效的.     

聚氧乙烯功能基复合修饰聚氨酯的合成及其血液相容性研究 (Ⅰ)──聚氨酯-接枝-十八烷基聚氧乙烯

通过十八烷基聚氧乙烯和环氧氯丙烷的封端反应制备了α-环氧基-ω-十八烷基聚氧乙烯大单体.并采用BF₃·Et₂O引发THF和大单体共聚合,得到了梳状的十八烷基聚氧乙烯接枝共聚醚.以该共聚醚为软段合成了十八烷基和聚氧乙烯复合修饰的聚氨酯(PEU-g-PEO-C₁₈).通过血小板粘附试验对材料的体外抗凝血性实验结果表明,采用具有选择性吸附白蛋白功能的十八烷基和PEO复合修饰聚氨酯,材料表面血小板粘附量明显减少.材料血液相容性的改善可能来源于疏水性的十八烷基和亲水性聚氧乙烯的协同作用.     

固体高分辨核磁共振研究聚氧乙烯/纳米二氧化硅复合物的界面相互作用

采用固体高分辨核磁共振碳谱对聚氧乙烯(PEO)/纳米二氧化硅(Nano-SiO₂)复合物体系的相态结构、分子间相互作用和分子运动进行了研究,发现随着复合物中SiO₂含量增加,PEO结晶度明显降低,且PEO非晶区的分子运动受到明显约束,基于对PEO非晶区及SiO₂颗粒表面羟基质子的自旋-自旋弛豫行为的分析,提出了复合物的界面模型以及SiO₂与PEO之间的界面相互作用机制.     

Formation of (η-R5C5)Ru(NO)X2 by the nitrosylation of (η-R5C5)Ru(CO)2X under irradiation

The ruthenium(II) complexes (η-R₅C₅)Ru(CO)₂X with R = H, CH₃ and X = Cl, Br, I undergo a facile reaction with nitric oxide under UV irradiation to afford ruthenium(IV) nitrosyl derivatives of the general type (η-R₅C₅)Ru(NO)X₂.     

Use of cerium oxide (CeO(2)) as a packing material for the chromatographic separation of C(60) and C(70) fullerenes

Cerium oxide (CeO₂) was tested as a packing material in liquid chromatography for the separation of C₆₀ and C₇₀ fullerenes. The separation of C₆₀ and C₇₀ fullerenes could be achieved within 20 min by using pure n-hexane as the mobile phase. Furthermore, some higher fullerenes could also be separated in less than 40 min. The peak area was reproducible to a large extent. The separation of fullerenes by liquid chromatography on CeO₂ is shown to be an effective method for their isolation in large amounts. The column efficiency of the CeO₂ column was compared with commercial silica gel and ODS columns. The main advantage of the CeO₂ column is its ability to separate large amounts of fullerenes (C₆₀ and C₇₀) in toluene.     

Effects of ceramic filler in poly(vinyl chloride)/poly(ethyl methacrylate) based polymer blend electrolytes

Effects of nano-ceramic filler titanium oxide (TiO₂) have been investigated on the ionic conductance of polymeric complexes consisting of poly(vinyl chloride) (PVC)/poly(ethyl methacrylate) (PEMA), and lithium perchlorate (LiClO₄). The composite polymer blend electrolytes were prepared by solvent casting technique. The TiO₂ nanofillers were homogeneously dispersed in the polymer electrolyte matrix and exhibited excellent interconnection with PVC/PEMA/PC/LiClO₄ polymer electrolyte. The addition of TiO₂ nanofillers improved the ionic conductivity of the polymer electrolyte to some extent when the content of TiO₂ is 15 wt%. The addition of TiO₂ also enhanced the thermal stability of the electrolyte. The changes in the structural and complex formation properties of the materials are studied by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) techniques. The scanning electronmicroscope image of nano-composite polymer electrolyte membrane confirms that the TiO₂ nanoparticles were distributed uniformly in the polymer matrix.     

Some further studies of estertin compounds. crystal structures of [NEt4][MeO2CCH2CH2Sn(dmio)2] (dmio = 1,3-dithiole-2-one-4,5-dithiolato) and (MeO2CCH2CH2)2SnX2[X2 = I2, (NCS)2 or Cl, Br]

Estertn compounds, (MeO₂CCH₂CH₂)₂SnX₂ [X₂ = I₂ (2); X₂ = Br₂ (9); X₂ = Cl, Br (4)) or X₂ = (NCS)₂ (3)] have been obtained by halide exchange reactions of (MeO₂CCH₂CH₂)₂SnCl₂. Crystal structure determinations of 2–4 revealed chelating MeO₂CCH₂CH₂ units with distorted octahedral geometries at tin. The Sn---O bond lengths in the isothiocyanato complex, 3, are shorter [2.390(11) to 2.498(12), mean 2.439 Å], with the chelate bite angles, C---Sn---O, larger [74.3(7) to 78.2(6), mean 76.0°] than those in the halide analogues 2 and 4 [Sn---O = 2.519(2) to 2.541(8), mean 2.530 Å; C---Sn---O 72.8(3) to 73.9(4), mean 73.3°]. ¹H, ¹³C and ¹¹⁹Sn NMR and IR spectra of 2–4 and 9 were determined in CDCl₃ solution: the NMR spectra of (MeO₂CCH₂CH₂)₂SnX₂ show the following trends: (i) both δ¹H and δ¹³C, increase and (ii) both ²J (Sn---H) and ¹J(Sn---C) decrease in the sequence X₂ = (NCS)₂, Cl₂, ClBr, Br₂ and I₂. The MeO₂CCH₂CH₂ and dmio groups (dmio = 1,3-dithiole-2-one-4,5-dithiolato) are all chelating groups in (MeO₂CCH₂CH₂)₂Sn(dmio) (5). As shown by X-ray crystallography, the tin atom in the anion of solid [Q][MeO₂CCH₂CH₂Sn(dmio)₂] 6 (Q = NEt₄) forms 5 strong bonds [to C and the 4 thiolato S atoms, Sn---S 2.459(2) to 2.559(2) Å], arranged in a near trigonal bipyramidal array. There is an additional Intramolecular but weaker, interaction with the carbonyl oxygen atom [Sn---O = 3.111(5) Å]; v(C=O) = 1714 cm⁻¹ in solid 6 (Q = NEt₄). NMR spectra of 5 and 6 are also reported.     

Systematic investigation of the effects of temperature and pressure on gas transport through polyurethane/poly(methylmethacrylate) phase-separated blends

Polyurethane (PU) and polyurethane–poly(methylmethacrylate) (PMMA) blend membranes were used in gas separation studies. The effects of blend composition, temperature, and pressure on the permeability, diffusivity, and solubility of CO₂, H₂, O₂, CH₄, and N₂ were investigated. The separation factors of some gas pairs were also evaluated. Positron annihilation lifetime spectroscopy was applied to assess free volume changes as a function of blend composition and temperature. Free volume size increases by approximately 30% with increasing temperature from 10 to 40 °C for all blends studied. The permeability of all gases decreases by approximately 55% with the addition of 30 wt% of PMMA. The permeation process is governed by diffusion, except that of CO₂. In relation to the behavior of gas transport as a function of temperature, some important observations are (i) CO₂ presents the lowest permeation activation energy value (28 kJ/mol), and (ii) gas pair selectivity increases at low temperatures and is high for gas pairs that present differences in permeation activation energies as high as 15 kJ/mol for the CO₂/CH₄ gas pair. Furthermore, the study with pressure variations shows that: (i) at elevated pressure, the PU and the blend membrane permeability to CO₂ and H₂ increases by approximately 35%, and (ii) oxygen-to-nitrogen selectivity increases with pressure as a consequence of the decrease in the permeability to nitrogen in the case of the 30%-PMMA blend.     

Interfacially formed poly(N,N-dimethylaminoethyl methacrylate)/polysulfone composite membranes for CO2/N2 separation

Interfacially formed poly(N,N-dimethylaminoethyl methacrylate)/polysulfone (PDMAEMA/PSF) composite membranes were developed for CO₂/N₂ separation. A layer of PDMAEMA was deposited on a microporous PSF substrate by the solution coating technique, followed by crosslinking with p-xylylene dichloride (XDC) at the interface between the PDMAEMA solid layer and the crosslinking solution. The hydrophilicity and surface free energy of the membranes were analyzed by contact angle measurements with different probe liquids. The permselectivity of the membrane was shown to be affected by the PDMAEMA deposition time, interfacial crosslinking reaction time, and the PDMAEMA and XDC concentrations in the polymer coating solution and the crosslinking solution, respectively. The composite membrane showed a CO₂ permeance of 85 GPU and a CO₂/N₂ ideal separation factor of 50 at 23 °C and 0.41 MPa of CO₂ feed pressure.     

A comprehensive computational study of N2H–XH, N2H–X2, and N2H–XY(YX) (X=Y=F, Cl, and Br) proton bound complexes

The results of theoretical studies on structures and energetics are presented for proton-bound complexes N₂H⁺–XH, N₂H⁺–X₂, and N₂H⁺–XY(YX) (X=Y=F, Cl, and Br). In all the monocations complexes, the halogen atom shares a proton with N₂. The calculated energetic results show that the stability decreases when descending in the corresponding periodic table column. The possible proton transfer dissociation processes of N₂H⁺+XH, N₂H⁺+X₂, and N₂H⁺+XY systems into XH₂⁺, X₂H⁺, XYH⁺, and YXH⁺ and molecular N₂ are calculated to be endothermic for share of the processes. The NBO results show that the largest intermolecular charge transfer is found in the Br bonded complexes.     

Direct determination of 4-nitrobenzoyl chloride by high-performance liquid chromatography based on silanophilic interaction

A high-performance liquid chromatographic method without prederivatization was investigated for the direct determination of 4-nitrobenzoyl chloride and 4-nitrobenzoic acid. The separation was carried out on C₃, C₈ and C₁₈ alkyl-bonded silica columns with cyclohexane-tetrahydrofuran as the eluent. The retention behaviour observed was obviously caused by the silanophilic interaction between the solute and stationary phase. Optimum separation of 4-nitrobenzoyl chloride and 4-nitrobenzoic acid was obtained on the C₃ column and the calibration graph showed a significant linear relationship. The method was found to be quantitative, reproducible and rapid.     

Retention on non-polar adsorbents in liquid—solid chromatography Effect of grafted alkyl chains

The retention of 39 molecular probes was measured on chemically bonded dense layers of (3,3-dimethylbutyl)dimethylsiloxy (DMB) and tetradecyldimethylsiloxy (C₁₄) substituents on silica as a function of the composition of the binary acetonitrile-water eluent. The sign of the “associated system peak” was also noted. The composition dependence of retention, measured as areal retention volume, could be described on both non-polar stationary phases by the two-parameter Snyder-Soczewinski equation and by the three parameter Schoenmakers equation in a broad but restricted composition range. The areal retention volume on the surface with grafted alkyl chains was equal to or higher than that on the non-swellable, smooth, non-polar DMB surface. Additional retention on the C₁₄ surface increased with increasing adsorption force (retention) on the DMB surface and it was a function of the composition of the eluent. A possible interpretation of the sign of the “associated system peak” generated by the injection of a pure solute is also given in terms of salvation of the solute in the mobile phase and in terms of the modification of the non-polar adsorbent by the adsorbed solute.     

Mobile phase selection for high-performance liquid chromatographic analysis of novel zinc(II) carboxylates with N-donor ligands

The PRISMA optimization project was used for mobile phase selection in the HPLC analysis of novel zinc(II) carboxylates of the type Zn(RCOO)₂ · L_n · q(H₂O) with N-donor ligands. The composition of the mobile phase is characterized by the solvent strength (S_T) and the selection points (P_S). At a constant S_T the correlation between P_S and retention data can be described by a quadratic function. For constant P_S the solvent strength and retention data correlate with a logarithmic function. On the basis of the results obtained in the TLC separation of the single zinc(II) carboxylate, solvents were chosen (ethanol, acetonitrile, methanol, dioxane, 2-propanol) that are suitable for HPLC analyses of zinc(II) carboxylates on LiChrosorb RP-8 and RP-18 columns.