磷脂修饰化的石墨烯纳米复合物的制备及其直接电化学研究

通过非共价键修饰方法制备了兼具良好生物相容性和导电性的磷脂1-棕榈酰-2-油酰甘油-3-磷酸钠-石墨烯(POPG-GP)纳米复合物,并利用TEM,FT-IR,UV-vis,zeta电位等对其形貌和结构进行了表征.由于POPG-GP纳米复合材料在水溶液中呈现出较为明显的负电性,因此,可通过静电自组装方法将辣根过氧化物酶(HRP)进一步组装到POPG-GP修饰的玻碳(POPG-GP/GC)电极上,构筑HRP/POPG-GP/GC修饰电极.电化学实验结果表明,POPG-GP纳米复合物能够有效实现HRP与修饰电极之间的直接电子转移.此外,固载在修饰电极表面的HRP对底物H2O2还表现出良好的电催化活性.HRP/POPG-GP/GC修饰电极对H2O2的检测线性范围为3.5~210μmol/L,最低检出限为1.17μmol/L(S/N=3),灵敏度为356.6 mA?cm-2?M-1,Km值为0.45 mmol/L.     

碳纳米管电极上辣根过氧化物酶的直接电化学

制备了碳纳米管修饰玻碳电极(CNT/GC).将辣根过氧化物酶(HRP)固定在CNT/GC电极表面,形成HRP-CNT/GC电极.研究了HRP的直接电子转移.实验结果表明,HRP在CNT/GC电极表面能进行有效和稳定的直接电子转移反应,其循环伏安曲线上表现出一对良好的、几乎对称的氧化还原峰;式量电位E^0'几乎不随扫速(至少在20～100 mV/s的扫速范围内)而变化,其平均值为(-0.319±0.002) V (vs. SCE, pH 6.9); HRP在CNT/GC电极表面直接电子转移的速率常数为(2.07±0.56) s^-1;式量电位E^0'与溶液pH 的关系表明HRP的直接电化学是(1e+1H⁺)的电极过程.进一步的实验结果显示,固定在CNT/GC电极表面的HRP能保持其对H₂O₂还原的生物电催化活性,而且能快速地响应H₂O₂浓度的变化.本文制备碳纳米管修饰电极和固定酶的方法具有简单和易于操作等优点,可用于获得其它生物氧化还原蛋白质和酶的直接电子转移.     

辣根过氧化物酶生物传感器检测苯肼的研究

采用酸性溶胶法在碳纳米管(CNT)上负载纳米TiO2颗粒,制备了CNT-TiO2修饰电极,利用TiO2与辣根过氧化物酶(HRP)间的静电吸附及TiO2与羧基的高反应特性,实现了HRP在CNT-TiO2修饰电极表面的固定.实验发现,该生物传感器对邻氨基苯酚过氧化氢溶液的氧化还原有很好的催化作用,利用苯肼对HRP的抑制作用实现了对环境污染物苯肼的检测.该生物传感器寿命长,性能稳定且可以重复使用.     

碳纳米管促进氧化还原蛋白质和酶的直接电子转移

将血红蛋白(Hb)、辣根过氧化物酶(HRP)和葡萄糖氧化酶(GOx)分别固定在经碳纳米管修饰的玻碳电极(CNT/GC)上,制成Hb CNT/GC、HRP CNT/GC和GOx CNT/GC电极.Hb、HRP和GOx在CNT/GC电极表面均能发生有效和稳定的直接电子转移反应,其相应的循环伏安曲线均显示出一对几近对称的氧化还原峰;在60mV/s下,其式量电位E0'分别为-0.343V、-0.319V和-0.456V(vs.SCE,pH6.9),且不随扫速而变;以上三者在CNT/GC电极表面直接电子转移的表观速率常数ks依次为1.25±0.25、2.07±0.56和1.74±0.42s-1;根据式量电位E0'随缓冲溶液pH值的变化关系,确知在CNT/GC电极上,Hb或HRP发生的直接电化学遵从(1e+1H+)电极过程机理,而GOx发生的直接电化学反应则遵从(2e+2H+)机理.此外,固定在CNT/GC电极表面的Hb、HRP和GOx也同时表现出对各自底物的生物电催化活性.由本文制备的碳纳米管修饰电极及其固定生物蛋白质(酶)的方法具有简单、易于操作等优点,并可用于对其它生物氧化还原蛋白质和酶的直接电子转移测试.     

辣根过氧化物酶生物传感器检测硫化物的研究

采用酸性溶胶法在碳纳米管(CNT)上负载纳米二氧化钛(TiO2)颗粒,并制备了CNT-TiO2修饰电极,利用TiO2与辣根过氧化物酶(HRP)间的静电吸附实现了HRP在CNT-TiO2修饰电极表面的固定。利用硫化物对HRP的抑制作用实现了对硫化物的检测。其峰电流值与硫化物的浓度在0.75×10-7～10.5×10-6mol/L范围内呈线性关系。方法的检出限为(3S/N)0.206×10-7mol/L。     

血红蛋白在纳米孔径氧化铝膜修饰电极上的直接电化学

运用电化学包埋法成功将血红蛋白(Hb)固定于纳米孔阳极氧化铝膜(AAO)修饰的玻碳电极(GC)表面, 制得Hb/PPy/AAO/GC修饰电极, 并对Hb/PPy/AAO/GC修饰电极的制备条件进行了优化. 研究了Hb/PPy/AAO/GC修饰电极在磷酸缓冲液(pH＝6.8)中的电化学行为, 探讨了血红蛋白在AAO修饰电极表面的直接电子转移机理. 结果表明阳极氧化铝膜不仅保持了血红蛋白的生物活性, 而且通过它的纳米尺寸效应, 实现了Hb与电极之间的直接电子转移. 其研究内容对生命科学和临床医学有着重要意义.     

纳米镍修饰TiO2纳米管电极检测胰岛素

采用阳极氧化法制备出高度有序的TiO2纳米管阵列作为基础电极,通过电沉积法将纳米镍颗粒负载在基础电极上,从而制备了纳米镍-二氧化钛纳米管(Ni/TiO2NTs)修饰电极。分别采用扫描电子显微镜和X射线衍射对Ni/TiO2NTs电极的形貌及组分进行了表征。将Ni/TiO2NTs电极用于对胰岛素的电化学测定。结果表明,在0.1 mol/L NaOH支持电解液中,胰岛素在Ni/TiO2NTs电极上有较好的电化学响应,胰岛素浓度在0.8～1.6μmol/L范围内,峰电流密度与其浓度呈良好的线性关系,检测限为0.28μmol/L,灵敏度为0.49×10-3 A/(μmol·L-1.cm-2)。     

聚3-甲基噻吩修饰量子点硫化铅连接TiO2纳米结构膜的光电化学研究

采用原位化学法在纳米结构TiO2电极上制备了量子点PbS(Q-PbS), 并用电化学方法在TiO2/Q-PbS表面聚合3-甲基噻吩[poly(3-Methylthiophene), PMeT]. 研究结果表明, PMeT和Q-PbS单独修饰纳米结构TiO2电极和PMeT修饰Q-PbS连接纳米结构TiO2电极的光电流产生的起始波长都向长波方向移动; 在可见光区光电转换效率均比纳米结构TiO2的光电转换效率提高显著; PMeT与Q-PbS修饰的纳米结构TiO2之间存在p-n异质结. 在一定条件下p-n异质结的存在有利于光生电子/空穴的分离, 提高了光电转换效率.     

细胞色素c在纳米杂化膜修饰玻碳电极上的直接电化学

以多壁碳纳米管(MWNTs)修饰玻碳(GC)电极为基底,自组装金纳米粒子(AuNPs)及L-半胱氨酸(L-Cys)研制杂化膜修饰电极(L-Cys/AuNPs/MWNTs/GC).实验表明,该膜修饰电极在pH=7.0的KH2PO4-K2HPO4缓冲溶液中对细胞色素c(Cyt c)的直接电子转移反应具有良好的电催化作用,C...     

Au@Pt纳米粒子催化O2还原反应的电化学研究

以100 nm的Au粒子为核,抗坏血酸为还原剂,H2PtCl6·6H2O为前驱体,合成了Pt包Au核壳结构纳米粒子( Au@ Pt)及其修饰的玻碳(GC)电极(Au@ Pt/GC).采用旋转圆盘电极等常规电化学方法,比较了Au@ Pt/GC和商用碳载铂(Pt/C)修饰的玻碳电极(Pt/C/GC)催化O2还原反应活性及耐甲醇性能,发现Au@ Pt纳米粒子在铂用量很低的情况下,其催化O2还原反应活性仍与商用Pt/C相当,而且还具有优良的耐甲醇性能;其催化O2还原反应机理按O2直接还原成H2O的四电子历程进行.     

A photoelectrochemical immunosensor for benzo[a]pyrene detection amplified by bifunctional gold nanoparticles

Ultrasensitive photoelectrochemical immunoassay of polycyclic aromatic hydrocarbon (PAH) is proposed using an antibody-modified nanostructured TiO(2) electrode combined with bifunctional gold nanoparticles modified with the PAH antigen and horseradish peroxidase (HRP). The HRP-catalyzed reaction prompts the electron transfer between the electrode and electrolyte causing an excellent photocatalytic performance.     

Direct electron transfer of horseradish peroxidase and its electrocatalysis based on carbon nanotube/thionine/gold composites

Horseradish peroxidase (HRP) was incorporated into multiwalled carbon nanotube/thionine/Au (MTAu) composite film by electrostatic interactions between positively charged HRP and negatively charged MTAu composite. The results of electrochemical impedance spectroscopy (EIS) confirmed adsorption of HRP on the surface of MTAu modified GC electrode. Moreover, the electrochemical results showed that HRP retained its bioactivity and bioelectrocatalytical activity, and also showed good direct electron transfer behavior on such a composite film.     

Coadsorption of horseradish peroxidase with thionine on TiO2 nanotubes for biosensing

In this study, we investigate the coadsorption of protein with thionine on TiO(2) nanotubes for biosensor design. The TiO(2) nanotube arrays fabricated by anodic oxidation of titanium substrate possess large surface areas and good uniformity and conformability and are ready for enzyme immobilization. Electrochemical and spectroscopic measurements show that the TiO(2) nanotube arrays provide excellent matrixes for the coadsorption of horseradish peroxidase (HRP) and thionine and that the adsorbed HRP on these TiO(2) nanotube arrays effectively retains its bioactivity. The immobilized thionine can be electrochemically reduced but cannot be reoxidized in the electrode potential range between -0.7 and 0.0 V. The addition of H(2)O(2) leads to the biocatalytic oxidation of the reduced thionine in the presence of HRP, resulting in developing a novel H(2)O(2) sensor with good stability and reproducibility. The fabricated TiO(2) nanotubes offer a stage for further study of immobilization and electrochemistry of proteins. The proposed method opens a way to develop biosensors using nanostructured materials with low electrical conductivity.     

金属氧化物(Fe2O3, CuO,NiO)改性对TiO2纳米管阵列光电催化活性的增强效应

采用阳极氧化法和阴极电沉积法制备了Fe2O3,CuO和NiO纳米粒子改性的高度有序的TiO2纳米管(TiO2-NT)阵列.运用场发射扫描电子显微镜(FE-SEM),透射电子显微镜(TEM),X射线衍射(XRD)和紫外-可见漫反射光谱等手段对Fe2O3/TiO2-NT、CuO/TiO2-NT和NiO/TiO2-NT复合电极进行表征.以苯酚为模拟污染物,考察复合电极的光电性能.结果表明,金属氧化物(Fe2O3,CuO,NiO)纳米粒子成功沉积在TiO2-NTs的管口、内壁和管底.金属氧化物改性复合电极的光电催化活性比未改性的TiO2-NTs提高了2倍以上.Fe2O3/TiO2-NTs在可见光区显示出最高的吸收强度.以Fe2O3/TiO2-NTs为阳极处理苯酚废水,光照120min后苯酚去除率达到96%,而未改性的TiO2-NTs的苯酚去除率只有41%.此外,Fe2O3/TiO2-NTs在生成低毒中间产物方面表现出良好的性能.较高的复合电极光电催化活性主要是由于TiO2纳米管和过渡金属氧化物纳米粒子间构筑的高界面面积异质纳米结构,有效地促进了电子转移,抑制了光生电子-空穴对的复合.     

铝基阳极氧化铝模板水热法制备TiO2纳米管阵列

在(NH4)2TiF6的水溶液中,以铝基阳极氧化铝为模板,采用水热法制备了TiO2纳米管阵列. 使用场发射扫描电镜和X射线衍射对水热合成产物进行了表征. 实验结果表明,水热处理所得TiO2纳米管阵列具有特殊的形貌,其表面为连续的多孔状,断面为不连续、相互分离的管状;管口和管壁分别由平均粒度约45和25 nm的微细TiO2颗粒紧密堆积而成. 采用本方法制备的TiO2纳米管阵列无需热处理便已具有明显的锐钛矿型晶相特征.     

Direct electrochemistry and electrochemical catalysis of myoglobin-TiO2 coated multiwalled carbon nanotubes modified electrode

TiO(2) nanoparticles were homogeneously coated on multiwalled carbon nanotubes (MWCNTs) by hydrothermal deposition, and this nanocomposite might be a promising material for myoglobin (Mb) immobilization in view of its high biocompatibility and large surface. The glassy carbon (GC) electrode modified with Mb-TiO(2)/MWCNTs films exhibited a pair of well-defined, stable and nearly reversible cycle voltammetric peaks. The formal potential of Mb in TiO(2)/MWCNTs film was linearly varied in the range of pH 3-10 with a slope of 48.65 mV/pH, indicating that the electron transfer was accompanied by single proton transportation. The electron transfer between Mb and electrode surface, k(s) of 3.08 s(-1), was greatly facilitated in the TiO(2)/MWCNTs film. The electrocatalytic reductions of hydrogen peroxide were also studied, and the apparent Michaelis-Menten constant is calculated to be 83.10 microM, which shows a large catalytic activity of Mb in the TiO(2)/MWCNTs film to H(2)O(2). The modified GC electrode shows good analytical performance for amperometric determination of hydrogen peroxide. The resultant Mb-TiO(2)/MWCNTs modified glassy carbon electrode exhibited fast amperometric response to hydrogen peroxide reduction, long term life and excellent stability. Finally the activity of the sensor for nitric oxide reduction was also investigated.     

电化学阻抗谱法研究铈改性TiO2纳米管阵列光电极裂解水产氢动力学

通过阳极氧化法在纯钛板上制备TiO2纳米管阵列电极.在光电化学电解池阳极中加入供电子物质乙二醇,显著减小了TiO2纳米管的电荷传递阻抗,促进了光电催化裂解水产氢反应.采用阴极电沉积和阳极氧化法制备了单质铈和氧化铈共同改性的TiO2纳米管阵列半导体光阳极,其平带电位向电负方向移动.采用电化学阻抗谱法(EIS)对改性后TiO2纳米管阵列在光电催化裂解水产氢中的电子传输性能以及界面性质进行了表征,确定了各阻抗弧对应的电极过程.采用合理的等效电路模型计算了电极的电子传输动力学参数.结果表明,经铈改性后的TiO2纳米管阵列膜电阻明显减小,有利于氢气的产生.探讨了单质铈与氧化铈促进TiO2纳米管阵列电荷传输的作用机理.     

Fe-Ni/TiO2纳米管阵列电极的制备、表征及光电催化还原五氯酚活性

采用阳极氧化法和浸渍电沉积联用法制备了不同负载量的Fe-Ni/TiO2纳米管阵列电极. 通过扫描电子显微镜(SEM)、 X射线光电子能谱(XPS)和电化学测量等手段对样品的微观形貌、 晶体结构和光电响应等特性进行分析. 考察了在0.6 V偏压下, 所制备的电极对五氯酚的光电催化还原性能. 结果表明, 适量的Fe和Ni纳米颗粒的负载, 降低了TiO2纳米管阵列光生电子-空穴对的复合几率; 浸渍电沉积5次的Fe-Ni/TiO2纳米管阵列电极光电催化还原降解五氯酚的效率为91.35%, 明显高于TiO2纳米管阵列电极.     

CoPt nanoparticles and their catalytic properties in electrooxidation of CO and CH(3)OH studied by in situ FTIRS

CoPt nanoparticles supported on a glassy carbon electrode (denoted as CoPt/GC) were prepared by galvanic replacement reaction between electrodeposited Co nanoparticles and K(2)PtCl(6) solution. Scanning electron microscope (SEM) and transmission electron microscope (TEM) were both employed to characterize the CoPt nanoparticles. It was shown that the CoPt nanoparticles have irregular shapes and most of them exhibit a core-shell structure with a porous Co core and a shell of Pt tiny particles. The composition of the CoPt nanoparticles was analyzed by energy-dispersive X-ray spectroscopy (EDX), which depicts a Co : Pt ratio of ca. 21 : 79. Studies of cyclic voltammetry (CV) demonstrated that CoPt/GC possesses a much higher catalytic activity towards CO and methanol electrooxidation than a nanoscale Pt thin film electrode. In situ FTIR spectroscopic studies have revealed for the first time, that a CoPt nanoparticles electrode exhibits abnormal IR effects (AIREs) for IR absorption of CO adsorbed on it. In comparison with the IR features of CO adsorbed on a bulk Pt electrode, the direction of the IR bands of CO adsorbed on the CoPt/GC electrode is inverted completely, and the intensity of the IR bands has been enhanced up to 15.4 times. The AIREs is significant in detecting the adsorbed intermediate species involved in electrocatalytic reactions. The results demonstrated a reaction mechanism of CH(3)OH oxidation on CoPt/GC in alkaline solutions through evidencing CO(L), CO(M), HCOO(-), CO(3)(2-), HCO(3)(-) and CO(2) as intermediate and product species by in situ FTIRS.