含偶氮咔唑生色团氧化乙烯功能单体的合成及其聚合反应研究

设计并合成了含偶氮苯生色团的环氧类功能单体和仅含咔唑环的单体,并以一定比例通过阳离子开环聚合合成了三个新的非共轭主链具有光折变生色团的聚合物,并用GPC、DSC、FT-IR、TG和UV-Vis等手段对所得聚合物进行了表征,考察了共聚单体配比对聚合物玻璃化转变温度的影响。UV-Vis谱图说明聚合物的最大吸收波长取决于生色团的种类。DSC结果显示,通过改变两个单体的配比可以有效调节共聚产物的玻璃化转变温度。TG结果显示,聚合物具有好的热稳定性,325℃左右开始分解。     

重氮偶合反应合成超支化偶氮聚合物的光响应性能研究

利用重氮偶合反应和后重氮偶合反应制备了主链和端基含有不同假芪型偶氮苯生色团的超支化偶氮聚合物.利用氢核磁共振、紫外光谱、红外光谱等分析手段确定了合成聚合物的结构、玻璃化转变温度和光谱特性等.研究了聚合物光致二向色性的性能,此聚合物的取向有序度为0.063.用两束相干的P偏振Ar+激光对聚合物膜进行光加工,得到形状规则的正弦波形表面起伏光栅,末端偶氮苯基团的引入极大地增加了超支化偶氮聚合物的光响应速度.     

表面起伏光栅形成速率的影响规律 Ⅰ.偶氮生色团种类和官能度的影响

设计并合成了含有不同生色团以及不同官能度的环氧树脂基偶氮高分子 ,系统研究了偶氮生色团的种类和官能度对光栅形成速率的影响规律 .实验结果表明 ,偶氮苯对位是羧基的聚合物的光栅形成速率明显快于偶氮苯对位是硝基的聚合物 ,光栅形成速率随偶氮生色团官能度的增加而加快 .这两类聚合物都可以形成规整的可擦式表面起伏光栅     

含偶氮苯的咔唑类双功能光折变聚合物的合成及表征

通过后重氮偶合方法制备了一系列不同生色团含量的咔唑类双功能光折变聚合物，并用IR、^1H-NMR、UV-vis、DSC以及GPC等对聚合物进行了分析和表征。IR和UV-vis谱图显示偶氮苯基团已接到咔唑环上。UV-vis结果表明：反应时间对该反应的影响非常大，当反应时间从6h增加到60h时，聚合物中生色团的含量从13.5%升高到66.7%。GPC结果显示后重氮偶合法比常规方法得到的该类聚合物的分子量明显提高。DSC结果显示聚合物的玻璃化转变温度随偶氮苯含量的增加而升高。     

两种侧链偶氮聚电解质自组装膜中生色团取向研究

用偏振紫外光谱研究了两种侧链偶氮聚电解质静电逐层自组装膜中偶氮生色团的初始取向 .讨论了不同的组装条件对自组装膜中偶氮生色团取向的影响 .进一步探讨了偶氮聚电解质自组装膜的结构特点 .研究表明 ,侧链偶氮聚电解质自组装膜中的偶氮生色团存在一定程度的面内取向 ,自组装的各种影响条件和聚合物结构等 (pH值、侧链柔性间隔基团长度、以及偶氮生色团官能度等 )与自组装膜中偶氮生色团的面内取向程度存在一定的相关性 .通过研究偶氮生色团的取向和影响因素 ,可以深入认识侧链偶氮聚电解质的自组装行为     

含三氟甲基偶氮生色团环氧树脂类聚合物合成和光致表面自结构研究

利用后重氮偶合反应,将4-(三氟甲基)苯胺的重氮盐与两种具有高苯胺残基密度的环氧树脂类前体聚合物在极性有机溶剂中反应,制备了两种具有高生色团密度的环氧树脂类偶氮聚合物PEP-AZ-CF3和PEP-35AZ-CF3.利用1H-NMR、FTIR、UV-Vis和DSC等分析方法对2种偶氮聚合物结构、热性能及吸收光谱性能进行了分析及表征.研究了在不同波长的激光(488、532及589 nm)照射下,2种偶氮聚合物薄膜光致表面自结构的形成.研究结果表明,入射激光的波长对偶氮聚合物表面自结构现象的形成有明显影响.仅在波长488 nm的偏振激光(线偏振光或圆偏振光)照射下,2种偶氮聚合物薄膜表面能观察到自结构现象.圆偏光比线偏光更有利于诱导表面起伏结构的形成,但形成的表面结构不具备长程取向有序性.聚合物生色团中偶氮键邻位的取代甲基对表面自结构的形成起到阻碍作用.     

新型支化侧链偶氮聚电解质的合成与性能研究

通过后重氮偶合的方法合成了一种含支化侧链偶氮苯生色团的聚电解质 (PBANT AC) .用IR、NMR、DSC、UV和元素分析等手段对聚合物的结构和性能进行了表征 .研究发现 ,在不同比例的水和四氢呋喃混合溶剂中PBANT AC的紫外 可见光光谱有很大的差别 .这种差别反映了PBANT AC分子中的偶氮苯生色团的不同聚集状态 .通过静电吸附逐层自组装的方法将PBANT AC分子组装成多层膜 .在 488nm的偏振Ar+ 激光的照射下 ,聚合物薄膜中的偶氮苯生色团可发生光致取向 ,取向有序度约 0 0 5 .偶氮苯生色团的顺反异构化反应使H 聚集体在光照后发生解聚集     

主链型聚氨酯光动力高分子的合成与表征

合成了一种主链含推拉电子型偶氮苯基团的聚氨酯光动力高分子 .对聚合物的结构、热性能及光学性能进行了表征 .此聚合物为主链含假芪型偶氮生色团的无定形高分子 .用 4 88nmAr+ 激光对聚合物薄膜进行光加工 ,得到了规则的正弦表面起伏光栅 ,其起伏深度大于 2 0 0nm .光栅的一级衍射效率可达 2 4 % .     

表面起伏光栅形成速率的影响规律Ⅱ.偶氮生色团上甲基取代基的影响

设计并合成了偶氮生色团上含有不同数目甲基取代基的环氧树脂类偶氮高分子 .研究了偶氮生色团上甲基取代对表面起伏光栅形成速率的影响规律 .实验结果表明 ,在偶氮生色团上引入甲基取代基使光栅形成的速率明显减慢 ,引入甲基数目越多 ,光栅形成速率就越慢 .     

含茋生色团聚醚的合成与热致液晶行为

β 氯乙基缩水甘油醚 (GCE)和GCE/羟丁基乙烯基醚 (HBVE)分别通过阳离子聚合、光引发共聚合 ,获得两种聚醚 ,然后再分别与 4 硝基 4′ 羟基 (NHS)反应 ,制备了两种侧链含生色团的液晶聚合物(PSEG、PSV) .用FTIR、1H NMR和EA对其化学结构及生色团含量进行了表征 ,以POM、DSC、TGA和WAXD对聚合物介晶相转变温度、织构、热稳定性及相行为进行了研究 .结果表明 ,这类聚合物属向列型热致双向性液晶 ,液晶相转变温度较低、范围较宽 ;聚合物热稳定性较好 ,开始分解温度在 30 0℃以上 .     

含双偶氮生色团的环氧树脂类聚合物的合成与表征

通过重氮偶合反应制备了含氨基取代基的假芪型偶氮小分子,并将其再配制成重氮盐,在极性溶剂中与含苯胺残基的环氧前体聚合物进行重氮偶合反应,制备了3种含双偶氮生色团的环氧树脂基聚合物BP-2A-35-CN、BP-2A-35-NT和BP-2A-35-2NT.利用仪器分析手段对其结构和热性能进行了表征;采用干涉激光辐照的方法,研究了不同取代基团对聚合物的光致表面起伏光栅形成过程的影响.研究结果表明,在相同光照条件下,BP-2A-35-CN和BP-2A-35-NT膜表面可形成正弦波形起伏光栅,但BP-2A-35-2NT膜表面无法形成明显的起伏结构.     

Synthesis and characterization of guest-host azo dyes with broad absorption bands

Three groups of dyes were synthesized and characterized in order to examine their solubility, absorption spectrum, and order parameter in liquid crystal hosts. Our synthesis method allowed the formation of the diazonium salts and the diazo coupling in ethyl acetate instead of an aqueous medium, permitting the formation of long and neutral azo dyes. In the liquid crystal BDH-E7, they showed order parameters in the range of 0.52 to 0.76. The two dyes with the longest molecular lengths were particularly interesting due to their very broad absorption spectra in the visible region. Each of these two compounds behave as single component black dye guest/host systems, which generally require a mixture of two or three dyes in the liquid crystal host. These dyes were also evaluated for use in polymer dispersed liquid crystal films.     

Synthesis and characterization of guest-host azo dyes with broad absorption bands

Abstract

Three groups of dyes were synthesized and characterized in order to examine their solubility, absorption spectrum, and order parameter in liquid crystal hosts. Our synthesis method allowed the formation of the diazonium salts and the diazo coupling in ethyl acetate instead of an aqueous medium, permitting the formation of long and neutral azo dyes. In the liquid crystal BDH-E7, they showed order parameters in the range of 0.52 to 0.76. The two dyes with the longest molecular lengths were particularly interesting due to their very broad absorption spectra in the visible region. Each of these two compounds behave as single component black dye guest/host systems, which generally require a mixture of two or three dyes in the liquid crystal host. These dyes were also evaluated for use in polymer dispersed liquid crystal films.     

Researches on synthetic dyes

It is shown that formazan-type compounds can be synthesized by coupling diazonium salts with nitrogen containing N-aryllepidine salts. N-phenyllepidinium perchlorate is used to prepare 8 dyes of the type mentioned.For Part LV see [6]     

聚苯乙烯基偶氮聚合物的合成研究

改进了聚苯乙烯的硝化、还原、重氮化和偶合反应路线 (NRDC) ,使每步反应都得到很高的产率 ,并利用大分子重氮盐 (MDS)分别与苯胺、N 烃基苯胺和酚等三类化合物偶合 ,得到相应的聚苯乙烯基偶氮聚合物 .核磁共振分析结果证明了产物的高偶联率 .通过对大分子重氮盐热稳定性的研究 ,发现偶合反应之后需要一步加热反应以消除残余重氮基团 .还研究了这些聚合物的紫外 可见吸收光谱性质 ,氨 (胺 )基偶氮产物的水溶液表现出了明显的pH敏感性     

Synthesis and characterization of water-soluble PEGylated lignin-based polymers by macromolecular azo coupling reaction

Water-soluble PEGylated lignin polymers were efficiently synthesized by macromolecular azo coupling reaction between alkali lignin and PEG based macromolecular diazonium salts in alkaline water.     

含噻唑偶氮苯生色团环氧树脂类聚合物的合成与表征

合成了2-氨基-4-氯-5-甲酰基噻唑和2-氨基-4-氯-5-二氰乙烯基噻唑.分别将其与亚硝酰硫酸反应配制成重氮盐,通过在极性溶剂中与含苯胺残基的环氧树脂类前体聚合物BP-AN进行重氮偶合反应,得到了两种含噻唑偶氮苯生色团的环氧树脂类聚合物BP-1A-T-F和BP-1A-T-2CN.利用仪器分析手段对其结构、光谱特性和热性能进行了表征,BP-1A-T-F和BP-1A-T-2CN的最大吸收波长分别为579nm和650nm;玻璃化转变温度152℃和149℃.     

New Heterocyclic Compounds Derived from 4,6‐Diamino‐3‐cyano‐2‐methylthiopyridine and their Biological Activity

Treatment of 4,6‐diamino‐3‐cyano‐2‐methylthiopyridine ( 1 ) with aqueous KOH or hydrazine hydrate afforded the corresponding nicotinamide 2 and pyrazolo[3,4‐b]pyridine 3 , respectively. Reaction of compound 1 with bromine, sulfuryl chloride, formaldehyde, or aromatic diazonium salts gave 5‐bromopyridine 4 , 5‐chloropyridine 5 , dipyridylmethane 6 , and azo dyes 7 , 8 , 9 , 10 , respectively. Compound 1 reacted with diketones to yield the corresponding butenylamino derivative 11 and amides 12 , 13 , 14 , 15 , respectively. Treatment of butanamide 13 with diazonium salts or a mixture of urea and aromatic aldehyde in the presence of drops of HCl as a catalyst yielded the corresponding arylhydrazones 16 , 17 , 18 , 19 , pyrimidines 20 , 21 , 22 , 23 , 24 , and 1,8‐naphthyridine 25 , respectively. The potency of the results as anti‐inflammatory and antifungal agents have been evaluated. The compounds have been characterized based on their spectral and elemental analysis.     

The Electrochemical Grafting of a Mixture of Substituted Phenyl Groups at a Glassy Carbon Electrode Surface

Two‐component substituted aryl groups are simultaneously grafted onto the surface of a glassy carbon electrode by electrochemical reduction of a binary mixture of two aryl diazonium salts in acetonitrile. The electrochemical deposition is achieved potentiostatically and two different mixtures with four different ratios of diazonium salts are used. The binary mixtures comprise: 1) 4‐nitrophenyl diazonium and 4‐bromophenyl diazonium cations and 2) 4‐bromophenyl diazonium and N,N‐diethylaniline diazonium cations. The chemical composition of the two component films is determined by cyclic voltammetry in an electrolyte inert for electroactive groups such as nitrophenyl and bromophenyl. X‐ray photoelectron spectroscopy is also used to evaluate the surface concentration of each grafted substituted phenyl group. The surface concentration of the substituted phenyl group for which the corresponding diazonium cation is the most easily reduced is higher than its concentration in the mixture of the deposition solution. The usefulness of binary films is also discussed.     

Reaction of 2-dialkyl-5-formylfurans, -thiophenes,and-selenophenes with aromatic diazonium salts

The reaction of 2-dialkylamino-5-formylfurans, -thiophenes, and -selenophenes with diazonium salts gives azo dyes with elimination of the aldehyde group.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1325–1326, October, 1974.