晶相组成可调的高活性可见光应答型二氧化钛纳米复合光催化材料的制备

采用新的化学溶液法,通过不同体积的钛酸四异丙酯的2-乙二醇单乙醚溶液与一定浓度的H₂O₂水溶液直接反应并对生成的钛过氧化配合物进行焙烧,制备了一系列TiO₂光催化剂. 表征发现,所得TiO₂样品为金红石和锐钛矿的纳米复合晶体,改变2-乙二醇单乙醚的体积可实现金红石相比例在0~96%广范围的调变.与商业二氧化钛P-25相比,所得的TiO₂紫外-可见光吸收谱出现明显红移,间隙能降低, 在可见光照射下,该样品对亚甲基蓝有良好的降解活性. 当2-乙二醇单乙醚的添加量为5 ml时,所得样品体相中金红石相比例接近50%,其光催化活性和吸附性能最好,可分别是P-25的3倍和5倍. 拉曼光谱结合X射线衍射等表征结果表明,该样品的表面仅含少量的金红石相. TiO₂纳米复合晶表面晶相的组成和分布对其光催化降解亚甲基蓝的活性及其吸附能力有直接的影响. 另外,TiO₂纳米复合晶的缺陷浓度也是增强其光吸收能力,提高其可见光光催化活性的原因之一.     

Selective dissolution of TiO2 crystalline phases: Physicochemical characterization and photocatalytic activity

In this study, different commercially available TiO₂ powders (Degussa P25, pure anatase, and rutile) were submitted to selective dissolution treatments, with H₂O₂/NH₄OH and 10% HF, known to remove rutile and anatase from physical mixtures. The aim was to check whether a particular separation method designed to remove a specific crystalline phase influences the properties of the other phase from the mixture or not. More precisely, we have studied how the HF dissolution method designed to selectively remove the anatase affected the physicochemical and photocatalytic properties of rutile. In a similar way, the changes in the anatase properties were studied, after the H₂O₂/NH₄OH treatment, initially used to remove rutile from the mixture. All the samples were characterized by X-ray diffraction, nitrogen adsorption–desorption, transmission electron microscopy, diffuse reflectance (DR) ultraviolet–visible, and Raman spectroscopy. The photocatalytic activity of these powders was tested in the oxidation of p-chlorophenol from water. The selective treatment methods not only dissolved the target phase but also changed some physicochemical and the photocatalytic performances of the other TiO₂ crystalline phase in a considerable manner. These aspects should be taken into account in the studies regarding the synergistic effects of anatase and rutile, especially in reconstructed TiO₂ photocatalysts.     

Synthesis and Modification of Zn‐doped TiO2 Nanoparticles for the Photocatalytic Degradation of Tetracycline

The synthesis of Zn‐doped TiO₂ nanoparticles by solgel method was investigated in this study, as well as its modification by H₂O₂. The catalyst was characterized by transmission electron microscopy, X‐ray diffraction, Brunauer–Emmett–Teller, UV–visible reflectance spectra and X‐ray photoelectron spectroscopy (XPS). The results indicated that doping Zn into TiO₂ nanoparticles could inhibit the transformation from anatase phase to rutile phase. Zn existed as the second valence oxidation state in the Zn‐doped TiO₂. Zn‐doped TiO₂ that was synthesized by 5% Zn doping at 450°C exhibited the best photocatalytic activity. Then, the H₂O₂ modification further enhanced the photocatalytic activity. Zn doping and H₂O₂ modifying narrowed the band gap and efficiently increased the optical absorption in visible region. The optimal degradation rate of tetracycline by Zn‐doped TiO₂ and H₂O₂ modified Zn‐doped TiO₂ was 85.27% and 88.14%. Peroxide groups were detected in XPS analysis of H₂O₂ modified Zn‐doped TiO₂, favoring the adsorption of visible light. Furthermore, Zn‐doped TiO₂ modified by H₂O₂ had relatively good reusability, exhibiting a potential practical application for tetracycline's photocatalytic degradation.     

Active Sites for Adsorption and Reaction of Molecules on Rutile TiO2(110) and Anatase TiO2(001) Surfaces (cited: 1)

The reactivity of specific sites on rutile TiO₂(110)-(1×1) surface and anatase TiO₂(001)-(1×4) surface has been comparably studied by means of high resolution scanning tunneling microscopy. At the rutile TiO₂(110)-(1×1) surface, we find the defects of oxygen vacancy provide distinct reactivity for O₂ and CO₂ adsorption, while the terminal fivefold-coordinated Ti sites dominate the photocatalytic reactivity for H₂O and CH₃OH dissociation. At the anatase TiO₂(001)-(1×4) surface, the sixfold-coordinated terminal Ti sites at the oxidized surface seem to be inert in both O₂ and H₂O reactions, but the Ti-rich defects which introduce the Ti³⁺ state into the reduced surface are found to provide high reactivity for the reactions of O₂ and H₂O. By comparing the reactions on both rutile and anatase surfaces under similar experimental conditions, we find the reactivity of anatase TiO₂(001) is actually lower than rutile TiO₂(110), which challenges the conventional knowledge that the anatase (001) is the most reactive TiO₂ surface. Our findings could provide atomic level insights into the mechanisms of TiO₂ based catalytic and photocatalytic chemical reactions.     

花状TiO2分级结构的可控合成与其光催化性能

采用水热法可控合成了花状TiO₂分级结构材料,运用扫描电镜、透射电镜、X射线衍射、N₂物理吸附-脱附等手段,对其进行了表征,系统研究了NaOH用量、H₂O₂浓度、HNO₃浓度、反应温度及时间等因素对所得样品形貌的影响,并评价了它们的光催化性能.结果表明,花状TiO₂分级结构为锐钛矿相,颗粒大小均一;随制备条件的变化,构成花状TiO₂分级结构的基元结构分别为纳米线、纳米片,纳米线直径约25nm,纳米片厚度不足10nm;该样品具有较高的比表面积,表现出良好的单次光催化活性与重复使用性能.     

Two‐Dimensional Hollow TiO2 Nanoplates with Enhanced Photocatalytic Activity

Two‐dimensional anatase TiO₂ hollow nanoplates were firstly synthesized through a facile synthesis route by using α‐Fe₂O₃ nanoplates as removable templates. Two‐dimensional hollow TiO₂ nanoplates with different ratios of anatase and rutile phases were obtained by adjusting the calcining temperature. The average diameters were around 600 nm, and the shell thickness was approximately 30 nm. The photocatalytic performance of TiO₂ was investigated by decomposing rhodamine B under simulated sunlight. Among the TiO₂ samples, the anatase TiO₂ hollow nanoplates manifested a significant enhancement in the photocatalytic performances. The excellent catalytic performance can be attributed to the unique structure of the two‐dimensional anatase TiO₂ hollow nanoplates, including a large surface area and increased dye–photocatalyst contact areas as well as more active sites for photodegradation.     

Photo Catalytic Degradation of Azo Dyes over Mn2+ Doped TiO2 Catalyst under UV/Solar Light:An Insight to the Route of Electron Transfer in the Mixed Phase of Anatase and Rutile

Mn²⁺ ion was doped into the TiO₂ matrix and its photocatalytic activity was evaluated for the degradation of a mono azo dye methyl orange (MO) and a di‐azo dye brilliant yellow (BY) under UV/solar light. X‐ray diffraction results revealed the phase transformation from anatase to rutile due to the inclusion of Mn²⁺ ion into the TiO₂ matrix. All the doped catalysts showed a red shift in the band gap to the visible region. The degradation reaction of the dyes was found to be dependent on its structure. It was found that mono azo dye degrades faster than di azo dye under UV/solar light. The rate constant under identical conditions calculated for the degradation of MO is 2.4 times (under UV light) and 4.5 times (under solar light) higher compared to BY. Among the photocatalysts studied, Mn²⁺(0.06 at.%)‐TiO₂ showed higher activity under both UV and solar light illumination. The synergestic effect in the bicrystalline framework of anatase and rutile effectively suppresses the charge carrier recombination and enhances the photocatalytic activity. The degradation reaction was followed by UV‐visible spectroscopy and the photoproducts formed were analyzed by GC‐MS techniques.     

Photocatalytic Activity of Microwave Plasma-Synthesized TiO2 Nanopowder

Nanocrystalline TiO₂ was synthesized using the microwave plasma technique and characterized using X-ray diffraction, transmission electron microscopy, scanning electron microscopy, laser particle size analyzer, UV–vis spectroscopy and BET surface area analyzer. The synthesized TiO₂ powder crystallized in anatase phase and the crystallite sizes were in nanometers. The photocatalytic activity of the compound was determined and compared against the activity of the commercial Degussa P-25 TiO₂ catalyst. The degradation rates of the dyes were found to be higher over the synthesized TiO₂ as compared to that over commercial Degussa P-25 TiO₂.     

静电自组装制备纳米TiO2/SiO2光催化材料

采用静电自组装方法制备了纳米TiO2/SiO2光催化材料。采用巯丙基三甲氧基硅烷偶联剂对SiO2进行干法改性,采用双氧水/冰醋酸将偶联剂巯基基团氧化为磺酸基基团。在正负电荷的吸引下,带负电荷的SiO2与带正电荷的钛聚合阳离子自发地组装在一起,经一定温度热处理得到纳米TiO2/SiO2光催化材料。采用XRD、FTIR、PL、UV-Vis DRS、SEM和ICP等对材料进行了分析和表征。采用甲基橙溶液评价材料的光催化性能。结果表明:SiO2促使锐钛矿的形成,抑制锐钛矿向金红石的转变,减小TiO2的晶粒尺寸,使得TiO2光吸收波长发生蓝移。TiO2与SiO2通过Si-O-Ti键发生结合。采用静电自组装方法制备的材料中TiO2的含量高于传统方法,导致材料的光催化性能有所提高。     

Curious behaviors of photogenerated electrons and holes at the defects on anatase,rutile, and brookite TiO2 powders: A review

Photocatalytic reactions are governed by photogenerated charge carriers upon band gap excitation. Therefore, for better understanding of the mechanism, the dynamics of photocarriers should be studied. One of the attractive materials is TiO₂, which has been extensively investigated in the field of photocatalysis. This review article summarizes our recent works of time-resolved visible to mid-IR absorption measurements to elucidate the difference of anatase, rutile, and brookite TiO₂ powders. The distinctive photocatalytic activities of these polymorphs are determined by the electron-trapping processes at the defects on powders. Powders are rich in defects and these defects capture photogenerated electrons. The depth of the trap is crystal phase dependent, and they are estimated to be < 0.1 eV, ∼0.4 eV and ∼0.9 eV for anatase, brookite, and rutile, respectively. Electron trapping reduces probability to meet with holes and then elongate the lifetime of holes. Therefore, it works negatively for the reaction of electrons but positively works for the reaction of holes. In the steady-state reactions, both electrons and holes should be consumed. Hence, the balance between the positive and negative effects of defects determines the distinctive photocatalytic activities of anatase, rutile, and brookite TiO₂ powders.     

Direct synthesis of Nd3+ doped mesoporous TiO2 and investigation of its photocatalytic performance

Nd³⁺ doped mesoporous TiO₂ samples with different molar ratio of Nd/Ti were synthesized by a sol?Cgel method. The textural and optical properties of the samples were systematical characterized by X-ray diffraction, transmission electron microscopy, N₂ adsorption?Cdesorption isotherms, Fourier transform infrared spectroscopy and UV?CVisible absorbance spectroscopy. It was revealed that Nd³⁺ doping inhibited the phase transformation from anatase to rutile after calcination, and the mesoporous structure of doped samples was still retained with the increase of Nd/Ti molar ratio. The surface area of the samples varied from 137 to 210 m²g^?1 and the average pore size of them ranged between 5.7 and 8.2?nm. The photocatalytic activities of all the samples were evaluated by degradation methyl orange (MO) in aqueous solution as a model reaction under UV light irradiation. The results showed that the doped samples demonstrated a higher photocatalytic activity than the mesoporous TiO₂, and the 3?mol% Nd³⁺ doped mesoporous TiO₂ exhibited the best photocatalytic performance. Meanwhile, a promotion effect of the H₂O₂ added was verified in the degradation of MO.     

Preparation of Magnetic Photocatalyst TiO2 Supported on NiFe2O4 and Effect of Magnetic Carrier on Photocatalytic Activity

A magnetic photocatalyst TiO₂/NiFe₂O₄ (TN) with typical ferromagnetic hysteresis was prepared by a sol‐gel method, which is easy to be separated from a slurry‐type photoreactor under the application of an external magnetic field, being one of promising photocatalysts for wastewater treatment. The analysis of XRD indicated that the highly dispersed NiFe₂O₄ nanoparticles prevented the formation of rutile phase to some extent. A transmission electron microscope (TEM) was used to characterize the structure of the photocatalyst, indicating that the NiFe₂O₄ nanoparticles highly dispersed among TiO₂ nanoparticles. The prepared photocatalyst showed high photocatalytic activity for the degradation of methyl orange in water. The degradation results revealed that the NiFe₂O₄ nanoparticles played the role of recombination centre of photogenerated electrons and holes for the TN photocatalyst, which gave rise to the decrease in photocatalytic activity. Moreover, the experiment on recycled use of TN demonstrated a good repeatability of the photocatalytic activity.     

Synthesis of W‐doped TiO2 by low‐temperature hydrolysis: Effects of annealing temperature and doping content on the surface microstructure and photocatalytic activity

A series of tungsten‐doped Titania photocatalysts were synthesized using a low‐temperature method. The effects of dopant concentration and annealing temperature on the phase transitions, crystallinity, electronic, optical, and photocatalytic properties of the resulting material were studied. The X‐ray patterns revealed that the doping delays the transition of anatase to rutile to a high temperature. A new phase W_yTi_1‐yO₂ appeared for 5.00 wt% W‐TiO₂ annealed at 900 °C. Raman and diffuse reflectance UV–Vis spectroscopy showed that band gap values decreased slightly up to 700 °C. X‐ray photoelectron spectroscopy showed that surface species viz. Ti³⁺, Ti⁴⁺, O^2?, oxygen‐vacancies, and adsorbed OH groups vary depending on the preparation conditions. The photocatalytic activity was evaluated via the degradation of methylene blue using LED white light. The degradation rate was affected by the percentage of dopants. The best photocatalytic activity was achieved with the sample labeled 5.00 wt% W‐TiO₂ annealed at 700 °C.     

Preparation of TiO<Subscript>2</Subscript> nanofibers immobilized on quartz substrate by electrospinning for photocatalytic degradation of ranitidine

The photocatalytic activity of TiO₂ nanofibers immobilized on quartz substrates was investigated by evaluating the decomposition of organic pollutants. TiO₂ nanofibers were synthesized by electrospinning the Ti-precursor/polymer mixture solution, followed by hot-pressing for enhancing the adhesion of TiO₂-nanofiber films to the substrates. TiO₂ started to crystalize in the anatase form at 500 °C and reached the optimal photocatalytic anatase/rutile phase ratio of 70:30 at a calcination temperature of 600 °C. The TiO₂-nanofiber film was demonstrated to be an efficient photocatalyst by ranitidine decomposition under UV illumination and was proven to have a comparable photocatalytic activity with the well-known Degussa P25 nanoparticulate photocatalyst and excellent recyclability during 10 cycles of photocatalytic operation, indicating no loss of TiO₂ nanofibers during photocatalytic operations.     

A sol–gel combustion synthesis method for TiO<Subscript>2</Subscript> powders with enhanced photocatalytic activity

TiO₂ photocatalytic powders were synthesized by a sol–gel combustion synthesis method in which urea was used as the fuel and titanyl nitrate was used as the oxidizer. Various fuel-to-oxidizer ratios were studied for their effects on the combustion phenomena and the properties of the synthesized TiO₂. The fuel-to-oxidizer ratio was found to determine the maximum combustion temperature, which in turn affects the specific surface area, crystallite size, and weight fraction of anatase phase of the synthesized TiO₂. The synthesized TiO₂ all contain carbonaceous species and are either pure anatase or anatase–rutile mixed phase in crystalline structure. The photocatalytic activity of the TiO₂ was found to correlate to a certain degree with the specific surface area, crystallite size, weight fraction of anatase phase, and visible and IR absorbances. The mixed phase TiO₂ shows a higher photocatalytic activity than the pure anatase phase TiO₂ when containing a small fraction (<~25 wt%) of rutile phase but a lower phoyocatalytic activity when containing a large fraction (>~25 wt%) of rutile phase. The synthesized TiO₂ all show higher photocatalytic activity than Degussa P25 TiO₂. The enhanced photocatalytic activity was attributed mainly to sensitization by the carbonaceous species and larger amounts of hydroxyl group adsorbed on the TiO₂ surface.     

Unifying the Nitrogen Reduction Activity of Anatase and Rutile TiO2 Surfaces

TiO₂ is a model transition metal oxide that has been applied frequently in both photocatalytic and electrocatalytic nitrogen reduction reactions (NRR). However, the phase which is more NRR active still remains a puzzle. This work presents a theoretical study on the NRR activity of the (001), (100), (101), and (110) surfaces of both anatase and rutile TiO₂. We found that perfect surfaces are not active for NRR, while the oxygen vacancy can promote the reaction by providing excess electrons and low-coordinated Ti atoms that enhance the binding of the key intermediate (HNN*). The NRR activity of the eight facets can be unified into a single scaling line. The anatase TiO₂(101) and rutile TiO₂(101) surfaces were found to be the most and the second most active surfaces with a limiting potential of −0.91 V and −0.95 V respectively, suggesting that the TiO₂ NRR activity is not very phase-sensitive. For photocatalytic NRR, the results suggest that the anatase TiO₂(101) surface is still the most active facet. We further found that the binding strength of key intermediates scale well with the formation energy of oxygen vacancy, which is determined by the oxygen coordination number and the degree of relaxation of the surface after the creation of oxygen vacancy. This work provides a comprehensive understanding of the activity of TiO₂ surfaces. The results should be helpful for the design of more efficient TiO₂-based NRR catalysts.     

Photocatalytic TiO2 coatings on limestone

The application of photocatalytic coatings on stone has been investigated for providing surface protection and self-cleaning properties. Sol–Gel and hydrothermal processes were used to synthesise TiO₂ colloidal suspensions and coatings with enhanced photocatalytic activity without any thermal curing of the coated stone. The stone was a porous limestone (apulian sedimentary carbonatic, calcite stone). Films and powders prepared from TiO₂ sols were studied using X-ray diffraction to evaluate the microstructure and identify rutile and anatase phases. A morphological and physical characterisation was carried out on coated and uncoated stone to establish the changes of appearance, colour, water absorption by capillarity and water vapour permeability. The photocatalytic activity of the coated surface was evaluated under UV irradiation through NO _x and organics degradation tests. The performances of the synthesised TiO₂ sols were compared with commercial TiO₂ suspension. Since the coating doesn’t need temperature treatments for activating the photocatalytic properties, the nano-crystalline hydrothermal TiO₂ sols seem good candidate for coating applications on stone that cannot be annealed after the coating application.     

TiO2/Gd2O3纳米粉体的制备、表征及光催化活性

利用酸催化的溶胶-凝胶法制备了纯TiO₂和Gd³⁺(0.5wt%)掺杂的TiO₂纳米粉体，采用XRD、BET、XPS、紫外-可见漫反射谱(DRS)和表面光电压谱(SPS)等技术进行了表征；以亚甲基蓝(MB)的光催化降解为探针反应，评价了其光催化活性；探讨了Gd³⁺掺杂对TiO₂纳米粉体的光催化活性的影响机制。结果表明，TiO₂/Gd₂O₃纳米粒子对MB溶液的光催化活性提高到纯TiO₂的1.5倍。掺杂Gd³⁺可以强烈抑制TiO₂由锐钛矿相向金红石相的转变；阻碍TiO₂晶粒的生长；提高高温组织稳定性，改善粉体的表面织构特性；形成光生电子的浅势捕获陷阱，抑制e^-/h⁺复合，这些因素共同作用最终导致TiO₂/Gd₂O₃纳米粉体的光催化活性明显提高。XPS分析结果证实，掺杂Gd³⁺导致粉体的表面羟基含量降低。由于产生了量子尺寸效应，复合粉体的紫外吸收带边蓝移，光的吸收能力略有降低。     

具有丰富(001)面的锐钛矿TiO2晶体的无氟合成

采用一种全新的方法实现了无氟、在阳离子聚合物参与下合成具有丰富(001)面的锐钛矿TiO₂晶体(TiO₂-P), 并通过X射线衍射、扫描电镜、透射电镜、紫外-可见光谱等手段对样品进行了表征. 光催化测试显示, 该样品对甲基橙的降解具有比常规锐钛矿TiO₂和商业P25更好的活性, 这可归因于TiO₂-P具有大量的暴露(001)晶面.     

超临界流体干燥法制备纳米TiO2-SnO2-SiO2复合光催化剂及其光催化性能研究

半导体多相光催化法作为一种污染治理新技术越来越受到人们的重视,在所使用的半导体光催化剂中,TiO2以无毒,催化活性高,价廉,无污染等特点,成为最具有前途的绿色环保型催化剂之一[1],但其自身具有局限性,如禁带宽度大,需在近紫外光下才能激发产生电子空穴对,对太阳光的利用率仅