Novel Supramolecular Hydrogels as Artificial Vitreous Substitutes

The possibility of employing self-healing gels as potential artificial vitreous substitutes is being explored. Advancement of traditional synthetic hydrogels as vitreous substitutes is hindered by their fragmentation upon injection into the vitreous cavity leading ultimately to inflammation. Preliminary work involved developing first generation self-healing gels, using amphiphilic tri-block copolymers of poly(propylene glycol)-block-poly(ethylene glycol)-block-poly(propylene glycol) (PPG-PEG-PPG) as the building block. Eight linear self-healing gels are synthesized by tethering an ureidopyrimidinone system to synthetically modified PPG-PEG-PPG via the formation of a bis-urea as a linker. The reversible nature of the hydrogen bonds permits alteration of their physical properties by changing the environment, yet retaining desirable characteristics. Despite low solubility in water, these polymers demonstrated associating behaviour under the investigated conditions, which is encouraging. Future generations of self-healing gels should involve the selection of a more hydrophilic core and/or star-like polymers to facilitate gel formation and strengthen the network.     

Preparation of stable gold nanoparticles by using diblock copolymer mixture as encapsulating agent

Gold nanoparticles by using the mixture of polystyrene-block-poly(2-vinyl pyridine)/poly(2-vinyl pyridine)-block-poly(ethylene oxide) (PS-b-P2VP/P2VP-b-PEO) block copolymers as encapsulating agent was prepared. The prepared nanoparticles were characterized by transmission electron microscopy, UV-Vis spectroscopy and contact angle. It is demonstrated that the obtained gold nanoparticles are covered with mixed block copolymer shells. The hydrophilic property of the nanoparticles can be varied by the change of the dispersion medium. The obtained gold nanoparticles with mixed block copolymer shells are stable in organic solvents (such as tetrahydrofuran and toluene) and water.     

pH-responsive polymersome based on PMCP-<Emphasis Type="Italic">b</Emphasis>-PDPA as a drug delivery system to enhance cellular internalization and intracellular drug release

Choline phosphate (CP) as a novel zwitterion possesses specific and excellent properties compared with phosphorylcholine (PC), as well as its polymer, such as poly(2-(methacryloyloxy)ethyl choline phosphate) (PMCP), has been studied extensively due to its unique characteristics of rapid cellular internalization via the sepcial quadrupole interactions with the cell membrane. Recently, we reported a novel PMCP-based drug delivery system to enhance the cellular internalization where the drug was conjugated to the polymer via reversible acylhydrazone bond. Herein, to make full use of this feature of PMCP, we synthesized the diblock copolymer poly(2-(methacryloyloxy)ethyl choline phosphate)-b-poly(2-(diisopropylamino)ethyl methacrylate) (PMCP-b-PDPA), which could self-assemble into polymersomes with hydrophilic PMCP corona and hydrophobic membrane wall in mild conditions when the pH value is ≥ 6.4. It has been found that these polymersomes can be successfully used to load anticancer drug Dox with the loading content of about 11.30 wt%. After the polymersome is rapidly internalized by the cell with the aid of PMCP, the loaded drug can be burst-released in endosomes since PDPA segment is protonated at low pH environment, which renders PDPA to transfer from hydrophobic to hydrophilic, and the subsequent polymersomes collapse thoroughly. Ultimately, the “proton sponge” effect of PDPA chain can further accelerate the Dox to escape from endosome to cytoplasm to exert cytostatic effects. Meanwhile, the cell viability assays showed that the Dox-loaded polymersomes exhibited significant inhibitory effect on tumor cells, indicating its great potential as a targeted intracellular delivery system with high efficiency.     

Self Organization and Redox Behavior of Poly(vinylferrocene)-block-Poly(isobutylene)-block-Poly(vinylferrocene) Triblock Copolymer †

Self organization and redox behavior of a ferrocene containing triblock copolymer, poly(vinylferrocene)-block-poly(isobutylene)-block-poly(vinylferrocene), with narrow molecular weight distribution in solutions and in thin films were investigated. Dynamic light scattering studies of the block copolymer in dilute solutions indicated that the polymer chains aggregated at relatively low concentrations. The aggregations of polymer chains were observed in toluene, as well as in tetrahydrofuran at concentrations as low as 0.014 mg/mL and 0.0045 mg/mL, respectively. Thin films of the copolymer showed reversible single electron redox behavior, similar to that of ferrocene. Morphology and micro-phase separation of the copolymer was analyzed by transmission electron microscopy.     

Preparation and Application of Double Hydrophilic Block Copolymer Particles

The preparation of some unique block copolymers and block copolymer particles via radical heterophase polymerization is described. Special emphasis is placed on double hydrophilic block copolymers such as poly(styrene sulfonic acid)-b-poly(methacrylic acid) diblock copolymer and double hydrophilic block copolymer particles consisting of both hydrophilic shells and cross-linked hydrophilic cores. Examples are given for the application of such particles as adsorbents, nano-reactors for chemical synthesis, and as colloidal stabilizers in both heterophase polymerization and biomineralization reactions.     

Synthesis of rod-coil block copolymers via end-functionalized poly(p-phenylene)s

This paper describes a new way to synthesize rod-coil block copolymers consisting of poly(p-phenylene) (PPP) as rigid rod and either polystyrene (PS) or poly(ethylene oxide) (PEO) as flexible coil. The Suzuki-coupling of the AB-type monomer 4-bromo-2,5-diheptylbenzeneboronic acid (1) under strictly proton-free conditions leads to the control of PPP endgroups and hence allows the synthesis of a variety of differently end-functionalized poly(p-phenylene)s. The poly(2,5-diheptyl-p-phenylene)-block-polystyrene (7) is then prepared via condensation via condensation of anionically polymerized living polystyrene ( 6 ) with α-(4-formylphenyl)-ω-phenyl-poly(2,5diheptyl-p-phenylene) ( 4 ). Toluenesulfonic acid catalyzed condensation of α-methyl-ω-amino-poly(oxyethylene) ( 8 ) with PPP 4 yields poly(2,5-diheptyl-p-phenylene)-block-poly(ethylene oxide) ( 9 ).     

Surface patterns of block copolymers in thin layers after vapor treatment

A systematic study of formation of surface patterns in block copolymer thin layers after their exposure to solvent vapors was performed. The studied effect involves layers of thickness approximately equal to the ordering size of polymers - about 45 nm. Experiments were performed on three styrene - methacrylate derivative block copolymers, synthesized by living anionic polymerization: poly(4-octylstyrene)-block-poly(butyl methacrylate), poly(4-fluorostyrene)-block-poly(butyl methacrylate) and poly(p-octylstyrene)-block-poly(methyl methacrylate). The polymers were exposed to vapors of chloroform, 1,4-dioxane, hexane, acetone and tetrahydrofuran.     

Synthesis of Amphiphilic ABCBA-Type Pentablock Copolymer from Consecutive ATRPs and Self-Assembly in Aqueous Solution

Summary: A novel amphiphilic ABCBA-type pentablock copolymer with properties that are sensitive to temperature and pH, poly(2-dimethylaminoethyl methacrylate)-block-poly(2,2,2-trifluoroethyl methacrylate)-block-poly(ε-caprolactone)-block-poly(2,2,2- trifluoroethyl methacrylate)-block-poly(2-dimethylaminoethyl methacrylate) (PDMAEMA- b-PTFEMA-b-PCL-b-PTFEMA-b-PDMAEMA), was synthesized via consecutive atom transfer radical polymerizations (ATRPs). The copolymers obtained were characterized by gel permeation chromatography (GPC) and ¹H nuclear magnetic resonance (NMR) spectroscopy, respectively. The aggregation behaviors of the pentablock copolymers in aqueous solution with different pH (pH = 4.0, 7.0 and 8.5) were studied. Transmission electron microscopic images revealed that spherical micelles from self-assembly of the pentablock copolymer were prevalent in all cases. The mean diameters of these micelles increased from 34, 46, to 119 nm when the pH of the aqueous solution decreased from 8.5, 7.0, to 4.0, respectively.     

pH-responsive Micelles from a Blend of PEG-<Emphasis Type="Italic">b</Emphasis>-PLA and PLA-<Emphasis Type="Italic">b</Emphasis>-PDPA Block Copolymers: Core Protection Against Enzymatic Degradation

pH-responsive micelles with a biodegradable PLA core and a mixed PEG/PDPA shell were prepared by self-assembly of poly(ethylene glycol)-b-poly(lactic acid) (PEG-b-PLA) and poly(2-(diisopropylamino)ethyl methacrylate)-b-poly(lactic acid) (PDPA-b-PLA). The micellization status with different pH and the enzyme degradation behavior were characterized by ¹H-NMR spectroscopy, dynamic light scattering measurement and zeta potential test. The pH turning point of PDPA block was determined to be in the range of 5.5?7.0. While the pH was above 7.0, the PDPA block collapsed onto the PLA core and could protect the PLA core from invasion of enzyme, as a result, the micelle exhibited a resistance to the enzymatic degradation.     

Self-assembled polypeptide-block-poly(vinylpyrrolidone) as prospective drug-delivery systems

Poly(β-benzyl-l-aspartate)-block-poly(vinylpyrrolidone) diblock copolymers (PAsp(OBzl)-b-PVP) having both hydrophobic and hydrophilic segments of various lengths were synthesized by a combination of ATRP and ROP. These amphiphilic diblock copolymers formed polymeric micelles consisting of a hydrophobic PAsp(OBzl) core and a hydrophilic PVP shell in aqueous solution. The block copolymer was characterized using ¹H NMR and gel permeation chromatography (GPC) analysis. Due to its core–shell structure, this block polymer forms unimolecular micelles in aqueous solutions. The micelle properties of PAsp(OBzl)-b-PVP diblock copolymer were extensively studied by dynamic light scattering (DLS), fluorescence spectroscopy, and transmission electron microscopy (TEM). PAsp(OBzl)-b-PVP copolymers displayed the lowest CMC and demonstrated little cytotoxicity when exposed to SW-1990 pancreatic cancer cells. In order to assess its application in biomedical area, the anti-inflammation drug prednisone acetate was loaded as the model drug in the polymeric nanoparticles. In vitro release behavior of prednisone acetate was investigated, which showed a dramatic responsive fast/slow switching behavior according to the pH-responsive structural changes of a micelle core structure. All of theses features are quite feasible for utilizing it as a novel intelligent drug-delivery system.     

Synthesis and aqueous solution properties of functionalized and thermoresponsive poly(D,L-lactide)/polyether block copolymers

Tri- and pentablock amphiphilic copolymers containing hydrophobic poly(D,L-lactide) block(s) and hydrophilic polyethers were synthesized in order to obtain new precursor architectures suitable for drug delivery systems. Polyglycidol-6-poly(ethylene oxide)-b-poly(D,L-lactide) possess high hydroxyl functionality provided by the linear polyglycidol block. Thus very stable hydroxyl functionalized micelles in aqueous media were obtained. On the other hand poly(D,L-lactide)-b-poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide)-b-poly(D,L-lactide) form temperature sensitive aggregates. The copolymers obtained were analyzed by SEC and NMR, and their aqueous solution properties were followed by cloud point measurements and determination of critical micellization temperature. TEM was used for particles visualization.     

Self-assembled tri-block terpolymer blend membranes reinforced with poly(methyl methacrylate)-coated gold nanoparticles obtained through phase inversion technique

The blend membranes of polystyrene-block-polyisoprene-block-polystyrene and polyethylene-block-poly(ethylene glycol)-block-polycaprolactone were designed using the phase inversion technique. The poly(methyl methacrylate)-coated gold nanoparticles are around 40–50 nm in size. The honeycomb-shaped nanopores were uniformly dispersed in polystyrene-block-polyisoprene-block-polystyrene/polyethylene-block-poly(ethylene glycol)-block-polycaprolactone/poly(methyl methacrylate)-coated gold nanoparticles blend membranes. There was a 16% increase in tensile strength and a 33% increase in tensile modulus of polystyrene-block-polyisoprene-block-polystyrene/polyethylene-block-poly(ethylene glycol)-block-polycaprolactone/poly(methyl methacrylate)-coated gold nanoparticles 1 relative to the neat membrane. With 1 wt% nanoparticles, the membrane showed a higher water flux of 59.2 mL cm^?2 min^?1 and a salt rejection ratio of 25.4%, while the polystyrene-block-polyisoprene-block-polystyrene/polyethylene-block-poly(ethylene glycol)-block-polycaprolactone membrane without poly(methyl methacrylate)-coated gold nanoparticles had lower flux (43.8 mL cm^?2 min^?1) and salt rejection (18.5%).     

Ring-Opening Polymerization of the Cyclic Ester Amide Derived from Adipic Anhydride and 1-Amino-6-hexanol in Melt and in Solution

The ring-opening polymerization (ROP) of the cyclic ester amide (cEA) 5 (systematic name, 1-oxa-8-aza-cyclotetradecane-9,14-dione) - prepared from adipic anhydride and 1-amino-6-hexanol - in the melt at 165 °C and in solution at 100 °C and 120 °C with Bu₂Sn(OMe)₂ or Ti(OBu)₄ as initiator yields the alternating poly(ester amide) (PEA) 4 (systematic name, poly(5-(6-oxyhexylcarbamoyl)-pentanoate) with regular microstructure. Kinetic studies for different monomer-to-initiator ratios, different reaction media, initiators and temperatures reveal that the ROP is a first-order reaction with respect to the monomer. Under suitable polymerization conditions termination and transfer reactions are suppressed. The elementary chain growth reaction proceeds by a coordination insertion mechanism in analogy to the polymerization of lactones. By using monohydroxy- and bishydroxy-functional telechelic poly(ethylene oxide) and Sn(octoate)₂ as the initiating system poly(ethylene oxide)-block-poly(ester amide)s and poly(ester amide)-block-poly(ethylene oxide)-block-poly(ester amide)s are obtained. The poly(ester amide) 4 is a semicrystalline material with a melting point of 140 °C, the block copolymers are phase separated systems showing two melting points characteristic for the respective homopolymers.     

A new way to the “knitting pattern” via blending of ABC triblock copolymers

The “knitting pattern” morphology was obtained via blending of two polystyrene-block-polybutadiene-block-poly(methyl methacrylate) triblock copolymers. This demonstrates that blending of block copolymers is a useful way to design periodic superstructures by taking advantage of the self-assembling nature of microphase separated block copolymers.     

Self-assembly mechanism of PEG-b-PCL and PEG-b-PBO-b-PCL amphiphilic copolymer micelles in aqueous solution from coarse grain modeling

We followed the self-assembly of high-molecular weight MePEG- b -PCL (poly(methyl ethylene glycol)-block-poly(ε-caprolactone)) diblock and MePEG- b -PBO- b -PCL (poly(methyl ethylene glycol)-block-poly(1,2-butylene oxide)-block-poly(ε-caprolactone)) into micelles using molecular dynamics simulation with a coarse grain (CG) force field based on quantum mechanics (CGq FF). The triblock polymer included a short poly(1,2-butylene oxide) (PBO) at the hydrophilic-hydrophobic interface of these systems. Keeping the hydrophilic length fixed (MePEG₄₅), we considered 250 chains in which the hydrophobic length changed from PCL₄₄ or PBO₆- b -PCL₄₃ to PCL₆₂ or PBO₉- b -PCL₆₁. The polymers were solvated in explicit water for 2 μs of simulations at 310.15 K. We found that the longer diblock system undergoes a morphological transition from an intermediate rod-like micelle to a prolate-sphere, while the micelle formed from the longer triblock system is a stable rod-like micelle. The two shorter diblock and triblock systems show similar self-assembly processes, both resulting in slightly prolate-spheres. The dynamics of the self-assembly is quantified in terms of chain radius of gyration, shape anisotropy, and hydration of the micelle cores. The final micelle structures are analyzed in terms of the local density components. We conclude that the CG model accurately describes the molecular mechanisms of self-assembly and the equilibrium micellar structures of hydrophilic and hydrophobic chains, including the quantity of solvent trapped inside the micellar core.     

Poly(ethylene oxide)-block-poly(α-cinnamyl-ε-caprolactone-co-ε-caprolactone) diblock copolymer nanocarriers for enhanced solubilization of caffeic acid phenethyl ester

We report novel micellar carriers, comprising pendant cinnamyl moieties in the core-forming block, designed to increase the solubilization of caffeic acid phenethyl ester (CAPE) in aqueous media. Amphiphilic poly(ethylene oxide)-block-poly(α-cinnamyl-ε-caprolactone-co-ε-caprolactone) (PEO-b-P(CyCL-co-CL) diblock copolymers were synthesized by ring-opening copolymerization of α-propargyl-ε-caprolactone and ε-caprolactone from a monofunctional PEO macroinitiator and subsequent attachment of cinnamyl groups via click reaction. In addition, a linear PEO-b-PCL diblock copolymer was synthesized and used in this study for comparison. Next, nanosized micelles from PEO-b-P(CyCL-co-CL) and PEO-b-PCL were formed via the solvent evaporation method and then loaded with CAPE. Dynamic and electrophoretic light scattering, and transmission electron microscopy were used to characterize both blank and loaded carriers. The potential of the micelles comprising pendant cinnamyl group to solubilize CAPE in water was evaluated in a comparative fashion to that of nonmodified PEO-b-PCL diblock copolymer.     

Closed-Loop Phase Behavior and Baroplasticity of deuterated Polystyrene-block-Poly(n-pentyl methacrylate) Copolymer investigated by SANS and FTIR Spectroscopy

The closed-loop phase behavior of deuterated polystyrene-block-poly(n-pentyl methacrylate) copolymer (dPS-PnPMA) was investigated by small-angle neutron scattering (SANS) and temperature-dependent Fourier transform infrared (FT-IR) spectroscopy. The effect of hydrostatic pressure on the transition temperatures was studied by using SANS. We found that dPS-PnPMA has large pressure coefficients of transition temperatures (dT/dP = ±725 °C/kbar). Since this block copolymer exhibited excellent baroplastic property, it was easily molded into a desirable shape at a relatively low temperature under medium pressure. On the other hand, commercially available polystyrene-block-poly(ethylene-co-butylene)-block-polystyrene copolymers were not molded at the same processing condition. Finally, we investigated the driving force inducing the closed-loop phase behavior by using temperature-dependent FT-IR.     

Versatile cobalt(Salen-NEt2) for aqueous cobalt-mediated radical polymerization

Cobalt-mediated radical polymerization (CMRP) has enabled the polymerization of a wide range of monomers with predictable molecular parameters and well-defined compositions and architectures. However, the synthesis of hydrophilic polymers by CMRP directly in the aqueous phase is still challenging. Herein, a handy cobalt complex was developed to perform CMRP of N-vinylpyrrolidone (NVP), 2-hydroxyethyl acrylate (HEA), and N,N-dimethylacrylamide (DMA) with linearly increased molecular weight, low polydispersity values, and smoothly shifted gel permeation chromatography (GPC) traces. The chain extensions of NVP, HEA, and DMA revealed the well chain-end fidelity for the synthesis of block copolymers. Moreover, the poly(N-vinylpyrrolidone)-block-poly(vinyl acetate) (PVP-b-PVAc) amphiphilic block copolymer colloidal solution was achieved directly in aqueous phase by cobalt-mediated radical polymerization-induced self-assembly (CMR-PISA), forming the nanoparticles consisting of a hydrophilic PVP corona and a hydrophobic PVAc core. This new mediator opens the opportunity for the synthesis of various hydrophilic (co)polymers in an environmentally friendly manner.     

pH-responsive Polymersome Based on PMCP-b-PDPA as a Drug Delivery System to Enhance Cellular Internalization and Intracellular Drug Release

Choline phosphate(CP) as a novel zwitterion possesses specific and excellent properties compared with phosphorylcholine(PC), as well as its polymer, such as poly(2-(methacryloyloxy)ethyl choline phosphate)(PMCP), has been studied extensively due to its unique characteristics of rapid cellular internalization via the special quadrupole interactions with the cell membrane. Recently, we reported a novel PMCP-based drug delivery system to enhance the cellular internalization where the drug was conjugated to the polymer via reversible acylhydrazone bond. Herein, to make full use of this feature of PMCP, we synthesized the diblock copolymer poly(2-(methacryloyloxy)ethyl choline phosphate)-b-poly(2-(diisopropylamino)ethyl methacrylate)(PMCP-b-PDPA), which could self-assemble into polymersomes with hydrophilic PMCP corona and hydrophobic membrane wall in mild conditions when the p H value is ≥ 6.4. It has been found that these polymersomes can be successfully used to load anticancer drug Dox with the loading content of about 11.30 wt%. After the polymersome is rapidly internalized by the cell with the aid of PMCP, the loaded drug can be burst-released in endosomes since PDPA segment is protonated at low p H environment, which renders PDPA to transfer from hydrophobic to hydrophilic,and the subsequent polymersomes collapse thoroughly. Ultimately, the "proton sponge" effect of PDPA chain can further accelerate the Dox to escape from endosome to cytoplasm to exert cytostatic effects. Meanwhile, the cell viability assays showed that the Dox-loaded polymersomes exhibited significant inhibitory effect on tumor cells, indicating its great potential as a targeted intracellular delivery system with high efficiency.     

Microphase separated structures based on N-substituted polydiallylamines

The ionogenic polymers namely poly(N,N-diallyl-N-cetylammonium hydronitrate) (PDACA · HNO₃) and poly(N,N-diallyl-N,N-dimethylammonium chloride)-block-poly(cetyl acrylate) (PDADMACl-block-PA-16) were synthesized via activation of the terminal double bond of the PDADMACl precursor and initiation of the polymerization of the acrylic monomer in alcohol solution. The microphase separated structure of a blend of both homopolymers and of the block copolymer was proved by differential scanning calorimetry (DSC) and X-ray diffraction measurements. Side chain crystallization in PDA-CA · HNO₃ completely restricts the crystallization of the ionogenic backbones which, however, control the layered structure and the crystallization of the aliphatic chains. In PDADMACl-block-PA-16 crystalline polyacrylate blocks coexist with crystalline ionogenic blocks. The length of the polyacrylate block influences the ability of the ionogenic block to form the crystalline structure.