Poly(ethylene oxide)-block-poly(α-cinnamyl-ε-caprolactone-co-ε-caprolactone) diblock copolymer nanocarriers for enhanced solubilization of caffeic acid phenethyl ester

We report novel micellar carriers, comprising pendant cinnamyl moieties in the core-forming block, designed to increase the solubilization of caffeic acid phenethyl ester (CAPE) in aqueous media. Amphiphilic poly(ethylene oxide)-block-poly(α-cinnamyl-ε-caprolactone-co-ε-caprolactone) (PEO-b-P(CyCL-co-CL) diblock copolymers were synthesized by ring-opening copolymerization of α-propargyl-ε-caprolactone and ε-caprolactone from a monofunctional PEO macroinitiator and subsequent attachment of cinnamyl groups via click reaction. In addition, a linear PEO-b-PCL diblock copolymer was synthesized and used in this study for comparison. Next, nanosized micelles from PEO-b-P(CyCL-co-CL) and PEO-b-PCL were formed via the solvent evaporation method and then loaded with CAPE. Dynamic and electrophoretic light scattering, and transmission electron microscopy were used to characterize both blank and loaded carriers. The potential of the micelles comprising pendant cinnamyl group to solubilize CAPE in water was evaluated in a comparative fashion to that of nonmodified PEO-b-PCL diblock copolymer.     

Synthesis and crystallization behaviors of poly(styrene-b-isoprene-b-ε-caprolactone) triblock copolymers

The triblock copolymers, poly(styrene-b-isoprene-b-ε-caprolactone)s (PS-b-PI-b-PCL) have been synthesized successfully by combination of anionic polymerization and ring-opening polymerization. Diblock copolymer capped with hydroxyl group, PS-b-PI-OH was synthesized by sequential anionic polymerization of styrene and isoprene and following end-capping reaction of EO, and then it was used as macro initiator in the ring-opening polymerization of CL. The results of DSC and WAXD show big effect of amorphous PS-b-PI on the thermal behaviors of PCL block in the triblock copolymers and the lower degree of crystalline in the triblock copolymer with higher molecular weight of PS-b-PI was observed. The real-time observation on the polarized optical microscopy shows the spherulite growth rates of PCL₂₇, PCL₃₂₈ and PS-b-PI-b-PCL₃₄₄ are 0.71, 0.46 and 0.07 μm s⁻¹, respectively. The atomic force microscopy (AFM) images of the PS₉₀-b-PI₆₆-b-PCL₂₈ show the columns morphology formed by it’s self-assembling.     

Synthesis of Amphiphilic ABCBA-Type Pentablock Copolymer from Consecutive ATRPs and Self-Assembly in Aqueous Solution

Summary: A novel amphiphilic ABCBA-type pentablock copolymer with properties that are sensitive to temperature and pH, poly(2-dimethylaminoethyl methacrylate)-block-poly(2,2,2-trifluoroethyl methacrylate)-block-poly(ε-caprolactone)-block-poly(2,2,2- trifluoroethyl methacrylate)-block-poly(2-dimethylaminoethyl methacrylate) (PDMAEMA- b-PTFEMA-b-PCL-b-PTFEMA-b-PDMAEMA), was synthesized via consecutive atom transfer radical polymerizations (ATRPs). The copolymers obtained were characterized by gel permeation chromatography (GPC) and ¹H nuclear magnetic resonance (NMR) spectroscopy, respectively. The aggregation behaviors of the pentablock copolymers in aqueous solution with different pH (pH = 4.0, 7.0 and 8.5) were studied. Transmission electron microscopic images revealed that spherical micelles from self-assembly of the pentablock copolymer were prevalent in all cases. The mean diameters of these micelles increased from 34, 46, to 119 nm when the pH of the aqueous solution decreased from 8.5, 7.0, to 4.0, respectively.     

Design and Development of D‒α‒Tocopheryl Polyethylene Glycol Succinate‒block‒Poly(ε-Caprolactone) (TPGS−b−PCL) Nanocarriers for Solubilization and Controlled Release of Paclitaxel

The objective of this study was to synthesize and characterize a set of biodegradable block copolymers based on TPGS-block-poly(ε-caprolactone) (TPGS-b-PCL) and to assess their self-assembled structures as a nanodelivery system for paclitaxel (PAX). The conjugation of PCL to TPGS was hypothesized to increase the stability and the drug solubilization characteristics of TPGS micelles. TPGS-b-PCL copolymer with various PCL/TPGS ratios were synthesized via ring opening bulk polymerization of ε-caprolactone using TPGS, with different molecular weights of PEG (1–5 kDa), as initiators and stannous octoate as a catalyst. The synthesized copolymers were characterized using ¹H NMR, GPC, FTIR, XRD, and DSC. Assembly of block copolymers was achieved via the cosolvent evaporation method. The self-assembled structures were characterized for their size, polydispersity, and CMC using dynamic light scattering (DLS) technique. The results from the spectroscopic and thermal analyses confirmed the successful synthesis of the copolymers. Only copolymers that consisted of TPGS with PEG molecular weights ≥ 2000 Da were able to self-assemble and form nanocarriers of ≤200 nm in diameter. Moreover, TPGS₂₀₀₀-b-PCL₄₀₀₀, TPGS₃₅₀₀-b-PCL₇₀₀₀, and TPGS₅₀₀₀-b-PCL₁₅₀₀₀ micelles enhanced the aqueous solubility of PAX from 0.3 µg/mL up to 88.4 ug/mL in TPGS₅₀₀₀-b-PCL₁₅₀₀₀. Of the abovementioned micellar formulations, TPGS₅₀₀₀-b-PCL₁₅₀₀₀ showed the slowest in vitro release of PAX. Specifically, the PAX-loaded TPGS₅₀₀₀-b-PCL₁₅₀₀₀ micellar formulation showed less than 10% drug release within the first 12 h, and around 36% cumulative drug release within 72 h compared to 61% and 100% PAX release, respectively, from the commercially available formulation (Ebetaxel^®) at the same time points. Our results point to a great potential for TPGS-b-PCL micelles to efficiently solubilize and control the release of PAX.     

Synthesis and Characterization of Triblock Terpolymers with three Potentially Crystallisable Blocks: Polyethylene-b-poly(ethylene oxide)-b-poly(ε-caprolactone)

A first attempt was made to produce novel ABC triblock terpolymers with three potentially crystallisable blocks: polyethylene (PE), poly(ethylene oxide) (PEO), and poly(ε-caprolactone) (PCL). Polybutadiene-b-poly(ethylene oxide) diblock copolymers were synthesized by living anionic polymerization. Then, a non-catalyzed thermal polymerization of ε-caprolactone from the hydroxyl end group of the PB-b-PEO diblock precursors was performed. Finally, hydrogenation by Wilkinson catalyst produced PE-b-PEO-b-PCL triblock terpolymers. Side reactions were detected that lead to the formation of undesired PCL-b-PEO diblock copolymers, however, these impurities were successfully removed by purification. A range of triblock terpolymers with PCL and PEO minor components were prepared. Topological restrictions on the PEO middle block prevented this block from crystallizing while the complex crystallization behavior of the PE and PCL blocks was documented by DSC and WAXS measurements.     

Synthesis and characterization of aba-type block copolymer of poly(ϵ-caproplactone) with poly(ethylene glycol), by mean of activation end groups

Poly(?-caprolactone)-b-poly(ethylene glycol)-b-poly(?-caprolactone) (PCL-b-PEG-b-PCL) triblock copolymer were synthesized by mean anionic activation of the hydroxyl end groups of poly(ethylene glycol) in presence of diphenylmethylsodium. Copolymers were characterized by SEC, FT-IR and ¹H-NMR spectroscopy, TGA and DSC. Size exclusion chromatographic analysis of obtained copolymers indicated incorporation of CL monomer into PEG without formation of PCL homopolymer. Characterization by FT-IR and ¹H NMR spectroscopy of the resulting polymeric products, with respect to their structure, end-groups and composition, showed that they are best described as ester-ether-ester triblock copolymers, whose compositions can be adjusted changing the feeding molar ratio of PEG to CL. The thermal stability of triblock copolymers was less that PEG precursor, but higher that PCL homopolymer. Analysis by mean DSC showed that all copolymers were semi-crystalline and their thermal behavior depending on their composition.     

Fabrication of biofunctional complex micelles with tunable structure for application in controlled drug release

In acidic solution, complex micelles were formed by diblock copolymers of poly (ethylene glycol)-b-poly (ε-caprolactone) (PEG-b-PCL) and folate-poly (2-(dimethylamino) ethyl methylacrylate)-b-poly (ε-caprolactone) (Fol-PDMAEMA-b-PCL) with a PCL core, a mixed PEG/Fol-PDMAEMA shell. The surface charge of the complex micelles was positive at acidic surroundings for the protonated PDMAEMA. With increasing pH value to 7.4 (above pK _a of PDMAEMA), these micelles could convert into a core-shell-corona (CSC) structure composing a hydrophobic PCL core, a collapsed PDMAEMA shell, and a soluble PEG corona. Compared to core-shell micelles formed by PEG-b-PCL, micelles with CSC structure can prolong degradation by enzyme. Doxorubicin was physically loaded into the PCL core. The drug release rate was pH-dependent. At pH 5.5, complex micelles with core-shell structure showed faster drug release rate, while at pH 7.4, complex micelles gained CSC structure which control the drug release at a lower rate. The multifunctional complex micelles were prepared for enhanced tumor therapy.     

Thermal characterization of biodegradable methoxy poly(ethylene glycol)-b-poly(d,l-lactide)/methoxy poly(ethylene glycol)-b-poly(ε-caprolactone) blend nanoparticles

Biodegradable methoxy poly(ethylene glycol)-b-poly(d,l-lactide) (MPEG-b-PDLL) and methoxy poly(ethylene glycol)-b-poly(ε-caprolactone) (MPEG-b-PCL) diblock copolymers were synthesized by ring-opening polymerization of DLL and CL monomers in bulk using stannous octoate, and MPEG as the initiating system. Surfactant-free MPEG-b-PDLL/MPEG-b-PCL blend nanoparticles were prepared by the nanoprecipitation method. The influences of block length and blend ratio on morphology, average size, and thermal properties of the blend nanoparticles were determined. The blend nanoparticles were spherical in shape. The average particle sizes slightly decreased as the MPEG-b-PCL blend ratio increased. ¹H-NMR and thermogravimetry revealed the different MPEG-b-PDLL/MPEG-b-PCL blend ratios of the nanoparticles. Differential scanning calorimetry showed that the MPEG-b-PCL crystallinity steadily decreased as the MPEG-b-PDLL blend ratio increased, suggesting miscible blending between the MPEG-b-PDLL and MPEG-b-PCL in the amorphous phase of the nanoparticle matrix.     

Hierarchical mesostructures of biodegradable triblock copolymers via evaporation-induced self-assembly directed by alkali metal ions

Hierarchical mesostructures of poly(ε-caprolactone)-b-poly(ethylene oxide)-b-poly(ε-caprolactone) (PCL-PEO-PCL) triblock copolymers have been grown from evaporation-induced self-assembly directed by alkali metal ions. The self-assembly process began with a dilute homogeneous solution of the triblock copolymers in a mixture of tetrahydrofuran (THF) and water. THF preferentially evaporated under reduced pressure and induced the formation of amphiphilic polymer micelles. The spherical polymer micelles formed both in deionized water and NaOH aqueous solution. However, different mesostructures were discovered during the film depositing process for scanning electron microscopy observation. The polymer micelles were observed for the deposition sample in deionized water while sisal-like hierarchical mesostructures resulted from the film deposition of polymer micelles in NaOH aqueous solution. The sisal-like mesostructures and their formation process were observed through scanning electron microscopy, transmission electron microscopy, fluorescent microscopy, X-ray diffraction, and Fourier transform infrared spectroscopy. Detailed study revealed that during evaporation-induced self-assembly of PCL-PEO-PCL amphiphilic triblock copolymer directed by alkali metal ions, the sodium ions and polymer micelles increasingly concentrated in NaOH aqueous solution and the solvent quality for the diblock progressively decreased, which resulted in the stronger coordination between alkali metal ions and PEO ligands in the block copolymer and PEO segment crystallization.     

Glasses-shaped triblock copolymer prepared by combination of atom transfer radical polymerization and ring opening polymerization

A glasses-shaped triblock copolymer of poly(ε-caprolactone)-b-polystyrene-b-poly(ε-caprolactone) (PCL-b-PS-b-PCL) is prepared by combining atom transfer radical polymerization (ATRP) and ring opening polymerization (ROP). Polystyrene (PS) star polymers are prepared via ATRP using a tetra-functional initiator, followed by azidation to yield azide end-functionalized star polymers. An alkyne-functionalized coupling agent, 2,2-bis[(2-propyn-1-yloxy)methyl]-1-propanol is employed to produce hydroxy 8-shaped PS via copper(I)-catalyzed alkyne-azide cycloaddition. Herein, hydroxy 8-shaped PS with high purity is obtained through preparative size exclusion chromatography (Prep SEC) and high-performance liquid chromatography, followed by the characterizations using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS), size exclusion chromatography (SEC), infrared, and proton nuclear magnetic resonance (¹H NMR) spectroscopy. The hydroxy groups of the 8-shaped PS are utilized as initiators for the ROP of ε-caprolactone to obtain linear chains attached to the 8-shaped architecture. After SEC fractionation, the glasses-shaped triblock copolymer is characterized using ¹H NMR and SEC. This unprecedented topology possesses two free chain-ends and two cycles; thus, both the properties of linear and cyclic polymers may be expected to be observed.     

Novel organotin-containing diblock copolymer with tunable nanostructures: Synthesis, self-assembly and morphological change

Interesting self-assembly behavior and morphological change of a novel organotin-containing diblock copolymer were firstly reported. The organotin-containing diblock copolymer, poly(methyl methacrylate)-block-poly(acetoxydibutyltin methacrylate) (PMMA-b-PADBTMA), was prepared via RAFT polymerization of ADBTMA with PMMA as the macroCTA and AIBN as the initiator in toluene. Both the FT-IR and TG analysis revealed an incorporation of both co-monomers in the resulted polymer backbone. The ratio of two segments was determined indirectly by TG analysis, gravimetric method and derivative process. All results from the different methods were well matched. And it was found that the morphology of the diblock copolymer could be changed easily from vesicles to nano-particle or cross-linked nano-composite under the ultrasonication or additional Ph₂SnCl₂, respectively. All the morphologies were analyzed by SEM, TEM and DLS. The self-assembly and the morphological change attributed to the strong coordination action between tin atoms and the carbonyl groups among PADBTMA segments.     

New Segmented Copolymers by Combination of Atom Transfer Radical Polymerization and Ring Opening Polymerization

Atom transfer radical polymerization (ATRP) and ring opening polymerization (ROP) were combined to synthesize various polymers with various structures and composition. Poly(ε-caprolactone)-b-poly(n-octadecyl methacrylate), PCL-PODMA, was prepared using both sequential and simultaneous polymerization methods. Kinetic studies on the simultaneous process were performed to adjust the rate of both polymerizations. The influence of tin(II) 2-ethylhexanoate on ATRP was investigated, which led to development of new initiation methods for ATRP, i.e., activators (re)generated by electron transfer (AGET and ARGET). Additionally, block copolymers with two crystalizable blocks, poly(ε-caprolactone)-b-poly(n-butyl acrylate)-b-poly(n-octadecyl methacrylate), PCL-PBA-PODMA, block copolymers for potential surfactant applications poly(ε-caprolactone)-b-poly(n-octadecyl methacrylate-co-dimethylaminoethyl methacrylate), PCL-P(ODMA-co-DMAEMA), and a macromolecular brush, poly(hydroxyethyl methacrylate)-graft-poly(ε-caprolactone), PHEMA-graft-PCL, were prepared using combination of ATRP and ROP.     

Solubilization of C60 using ultrasound and amphiphilic block copolymers in acidic aqueous solutions

Fullerene (C₆₀), the third carbon allotrope, has shown great potential in photoelectric materials and drug delivery. However, the low solubility of C₆₀ in polar solvents, especially in water, is the major limiting factor for further applications. The use of ultrasound and amphiphilic block copolymers, poly(ethylene glycol)-block-poly(4-vinylpyridine) (PEG-b-P4VP), helped to disperse C₆₀ in acidic aqueous solutions. As characterized by dynamic light scattering, transmission electron microscopy, and UV-visible spectroscopy, the C₆₀ colloids had a core-shell structure with C₆₀ aggregated in the micellar cores. The photosensitized generation of singlet oxygen using C₆₀-bound polymer micelle was confirmed by the iodide method. More importantly, C₆₀ and metalloporphyrin complexes could be synthesized by the self-assembly between PEG-b-P4VP/C₆₀ micelle and metalloporphyrin. The stability of metalloporphyrin increased in the presence of the PEG-b-P4VP/C₆₀ micelle. This study provides a method for the solubilization of C₆₀ with many potential applications in biomedicals and photovoltaics.     

Synthesis of poly(N,N‐dimethylacrylamide)‐block‐poly(ethylene oxide)‐block‐poly(N,N‐dimethylacrylamide) and its application for separation of proteins by capillary zone electrophoresis

A series of well‐defined triblock copolymers, poly(N, N‐dimethylacrylamide)‐block‐poly(ethylene oxide)‐block‐poly(N, N‐dimethylacrylamide) (PDMA‐b‐PEO‐b‐PDMA) synthesized by atom transfer radical polymerization, were used as physical coatings for protein separation. A comparative study of EOF showed that the triblock copolymer presented good capillary coating ability and EOF efficient suppression. The effects of the M_r of PDMA block in PDMA‐b‐PEO‐b‐PDMA triblock copolymer and buffer pH on the separation of basic protein for CE were investigated. Moreover, the influence of the copolymer structure on separation of basic protein was studied by comparing the performance of PDMA‐b‐PEO‐b‐PDMA triblock copolymer with PEO‐b‐PDMA diblock copolymer. Furthermore, the triblock copolymer coating showed higher separation efficiency and better migration time repeatability than fused‐silica capillary when used in protein mixture separation and milk powder samples separation, respectively. The results demonstrated that the triblock copolymer coatings would have a wide application in the field of protein separation.     

Synthesis,characterization, and property of amphiphilic fluorinated abc‐type triblock copolymers

Novel amphiphilic fluorinated ABC‐type triblock copolymers composed of hydrophilic poly(ethylene oxide) monomethyl ether (MeOPEO), hydrophobic polystyrene (PSt), and hydrophobic/lipophobic poly(perfluorohexylethyl acrylate) (PFHEA) were synthesized by atom transfer radical polymerization (ATRP) using N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA)/CuBr as a catalyst system. The bromide‐terminated diblock copolymers poly(ethylene oxide)‐block‐polystyrene (MeOPEO‐b‐PSt‐Br) were prepared by the ATRP of styrene initiated with the macroinitiator MeOPEO‐Br, which was obtained by the esterification of poly(ethylene oxide) monomethyl ether (MeOPEO) with 2‐bromoisobutyryl bromide. A fluorinated block of poly(perfluorohexylethyl acrylate) (PFHEA) was then introduced into the diblock copolymer by a second ATRP process to synthesize a novel ABC‐type triblock copolymer, poly(ethylene oxide)‐block‐polystyrene‐block‐poly(perfluorohexylethyl acrylate) (MeOPEO‐b‐PSt‐b‐PFHEA). These block copolymers were characterized by means of proton nuclear magnetic resonance (¹H NMR) and gel permeation chromatography (GPC). Water contact angle measurements revealed that the polymeric coating of the triblock copolymer (MeOPEO‐b‐PSt‐b‐PFHEA) shows more hydrophobic than that of the corresponding diblock copolymer (MeOPEO‐b‐PSt). Bovine serum albumin (BSA) was used as a model protein to evaluate the protein adsorption property and the triblock copolymer coating posseses excellent protein‐resistant character prior to the corresponding diblock copolymer and polydimethylsiloxane. These amphiphilic fluoropolymers can expect to have potential applications for antifouling coatings and antifouling membranes. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Hydrogen bond mediated self-assembly of two diblock copolymers

Two chemically dissimilar diblock copolymers, polybutadiene-b-poly(acrylic acid), PBd-b-PAA (M_w = 5.8–4 kg mol⁻¹) and poly(styrene)-b-poly(ethylene oxide), PS-b-PEO (M_w = 9–5 kg mol⁻¹) were blended in an effort to achieve morphologies typical of triblock copolymers. Blend compatibility was achieved by the hydrogen bond driven association of the PAA block of one diblock with the PEO block of the other. Small angle X-ray scattering was used to determine the morphologies of the compositions, which were further investigated using transmission electron microscopy and selective staining techniques. The crystallinity of the PEO block was determined by differential scanning calorimetry. The hydrogen bond interactions between PEO and PAA yielded a complex triblock lamellar morphology of the form PS-b-(PEO/PAA)-b-PBd-b-(PEO/PAA). This morphology was stable when crystallization of PEO was suppressed by sufficient interaction with PAA.     

三嵌段共聚物PAN-b-PEG-b-PAN的合成及其自组装行为的研究

利用原子转移自由基聚合(ATRP)制得了分子量可控、分子量分布窄的聚丙烯腈-b-聚乙二醇-b-聚丙烯腈P(AN-b-PEG-b-PAN)嵌段共聚物. 通过¹H NMR, FTIR, 凝胶渗透色谱(GPC)对所得产物的结构和分子量进行了表征并通过TG和DTA考察了该嵌段共聚物的热稳定性; 运用透射电子显微镜(TEM)、荧光探针技术和动态光散射(DLS)研究了P(AN)₂₇-b-P(EG)₄₅-b-P(AN)₂₇在溶剂水中胶束的形成、结构、形貌和胶束粒径. 结果表明, 三嵌段共聚物P(AN)₂₇-b-P(EG)₄₅-b-P(AN)₂₇的热稳定性较纯聚乙二醇P(EG)好, 且柔性链PEG的引入对嵌段共聚物的放热峰位置没有显著的影响. 当改变此嵌段共聚物溶液浓度时, 该嵌段共聚物会自组装成不同形状的胶束, DLS测量的胶束粒径大于TEM观察的结果, 其临界胶束浓度(cmc)约为4.46×10^－4 g•L^－1.     

Hybrid supramolecular hydrogels induced by Au nanoparticles protected with MPEG-b-PCL copolymers with α-cyclodextrin

To fabricate supramolecular hydrogel hybridised with well-dispersed gold nanoparticles (AuNPs), water-soluble AuNPs protected with methoxy poly(ethylene glycol)-b-poly(?-caprolactone) (MPEG-b-PCL) self-assembled monolayers (MPEG-b-PCL/AuNPs) were synthesised and used as guest molecules to interact with α-cyclodextrin (α-CD) in aqueous solutions. Transmission electron microscopy measurement results showed that the diameter of the AuNPs produced was about 6–10 nm with a narrow particle size distribution, and stained MPEG-b-PCL/AuNPs micelles made in water clearly displayed the formation of a core-shell structure with a single gold core per micelle. X-ray diffraction measurement results confirmed that there existed the characteristic peaks of both AuNPs and polypseudorotaxanes formed via the inclusion complexation of MPEG-b-PCL moieties with α-CD in as-obtained hydrogels. UV–visible spectra displayed that the same surface plasma resonance absorption peaks appeared at 526 nm for both aqueous dispersion of MPEG-b-PCL/AuNPs and resultant hybrid hydrogel with α-CD. Rheological measurements showed that the hybrid hydrogel has a lower mechanical strength and viscosity, and a relatively prolonged gelation time in comparison with the corresponding native hydrogel. The mechanical strength of the hydrogel nanocomposites could be tailored by modulating the concentration of MPEG-b-PCL/AuNPs and α-CD as well as the composition of MPEG-b-PCL/AuNPs.     

Uniform antibacterial cylindrical nanoparticles for enhancing the strength of nanocomposite hydrogels

Crystallization-driven self-assembly (CDSA) was employed for the preparation of monodisperse cationic cylindrical nanoparticles with controllable sizes, which were subsequently explored for their effect on antibacterial activity and the mechanical properties of nanocomposite hydrogels. Poly(ɛ-caprolactone)-block-poly(methyl methacrylate)-block-poly[2-(tert-butylamino) ethyl methacrylate] (PCL-b-PMMA-b-PTA) triblock copolymers were synthesized using combined ring-opening and RAFT polymerizations, and then self-assembled into polycationic cylindrical micelles with controllable lengths by epitaxial growth. The polycationic cylinders exhibited intrinsic cell-type-dependent antibacterial capabilities against gram-positive and gram-negative bacteria under physiological conditions, without quaternization or loading of any additional antibiotics. Furthermore, when the cylinders were combined into anionic alginate hydrogel networks, the mechanical response of the hydrogel composite was tunable and enhanced up to 51%, suggesting that cationic polymer fibers with controlled lengths are promising mimics of the fibrous structures in natural extracellular matrix to support scaffolds. Overall, this polymer fiber/hydrogel nanocomposite shows potential as an injectable antibacterial biomaterial, with possible application in implant materials as bacteriostatic agents or bactericides against various infections.     

Synthesis and micelle formation of triblock copolymers of poly(methyl methacrylate)-b-poly(ethylene oxide)-b-poly(methyl methacrylate) in aqueous solution

Amphiphilic triblock copolymers of poly(methyl methacrylate)-b-poly(ethylene oxide)-b-poly(methyl methacrylate) (PMMA-b-PEO-b-PMMA) with well-defined structure were synthesized via atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) initiated by the PEO macroinitiator. The macroinitiator and triblock copolymer with different PMMA and/or PEO block lengths were characterized with ¹H and ¹³C NMR and gel permeation chromatography (GPC). The micelle formed by these triblock copolymers in aqueous solutions was detected by fluorescence excitation and emission spectra of pyrene probe. The critical micelle concentration (CMC) ranged from 0.0019 to 0.016 mg/mL and increased with increasing PMMA block length, while the PEO block length had less effect on the CMC. The partition constant K_v for pyrene in the micelle and in aqueous solution was about 10⁵. The triblock copolymer appeared to form the micelles with hydrophobic PMMA core and hydrophilic PEO loop chain corona. The hydrodynamic radius R_h,app of the micelle measured with dynamic light scattering (DLS) ranged from 17.3 to 24.0 nm and increased with increasing PEO block length to form thicker corona. The spherical shape of the micelle of the triblock copolymers was observed with an atomic force microscope (AFM). Increasing hydrophobic PMMA block length effectively promoted the micelle formation in aqueous solutions, but the micelles were stable even only with short PMMA blocks.